Sonstiges, Englisch, 1278 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, 1278 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-908453-20-8
Verlag: Trans Tech Publications
This special volume addresses fundamental and practical aspects of high-temperature corrosion and protection. It stresses that devoting attention to an understanding of the corrosion problems encountered by contemporary industry, and providing opportunities for extended interaction, could lead to approaches for improving the performance of materials and protective measures.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Progress in the Study of the Theory and Practice of High Temperature Protective Coatings in the 22 Years of the Les Embiez SymposiaErosion and High Temperature Oxidation Resistance of New Coatings Fabricated by a Sol-Gel Route for a TBC ApplicationEvolution of Oxide Scales on Aluminide Coatings under Isothermal and Cyclic ConditionsImprovement of High-Temperature Oxidation of Titanium Alloys by Dipping in a Phosphoric Acid Solution Development of a NiW In Situ Diffusion Barrier on a Fourth Generation Nickel-Base SuperalloyEffect of Material and Environmental Parameters on the Microstructure Evolution and Oxidation Behavior of a Ni-Based Superalloy Coated with a Pt-Modified Ni-AluminideElaboration of Nickel Aluminide Diffusion Coatings: Application to Oxidation ResistanceRumpling of Platinum Modified Aluminide Coatings during Thermomechanical TestingThe Kinetics of Oxidation of Ru-Bearing Nickel-Based SuperalloysPlatinum Diffusion and Microstructure Change in a Single Crystal Superalloy and Nickel-Based Model Alloys at 1000?CComparison of the Thermal Cycling Performance of Thermal Barrier Coatings under Isothermal and Heat Flux ConditionsInfluence of Micro-Structure on Oxidation Behavior of a Ni-Based Superalloy at 1000?C Short-Time Oxidation of a NiAl(Zr) Bond Coat Thermochemically Deposited on a Nickel-Based SuperalloyOxide Spallation in Beta-NiAl Coated Systems under Mechanicalloading Creep Deformation / Oxidation Behavior of Re-Cr-Ni Diffusion Barrier Coated Hastelloy-X at 970?C in AirStudy of the Microstructure and Oxidation Behavior of Chromium Base Alloys Strengthened by NiAl PrecipitatesA Novel Duplex Re-NiW Based Diffusion Barrier on a Nickel-Base Superalloy for TBC SystemsFormation of Pt-Modified ??-Ni3Al and Re-Based s-Alloy Coating System and Cyclic Oxidation Behavior of Coated Superalloy Preliminary Results of the Isothermal Oxidation Study of Pt-Al-NiCoCrAlYTa Multi-Layered Coatings Prepared by Sparks Plasma Sintering (SPS)A Prototype Software Tool for Life Time Assessment of Thermal Barrier Coating SystemsNumerical Modelling of Diffusion Coupled with Cyclic Oxidation. Application to Alumina-Forming Coatings Used for Industrial Gas Turbine BladesChemistry of Ash-Deposits on Gas Turbines Hot Parts: Reactivity of Nickel, Zinc and Iron Oxides in (Na, V, S) Molten SaltsHydrogen Detection in Buried Layers of Thermal Barrier CoatingsAluminide Coating Formation on Internal Passages of GTD-111 Superalloy by Slurry TechniqueEnigmatic Moisture Effects on Al2O3 Scale and TBC AdhesionPhase Field Modeling of Interdiffusion Microstructure in Ni-Cr-Al Diffusion CouplesDegradation of Yttria Stabilized Zirconia Thermal Barrier Coatings by Molten CMAS (CaO-MgO-Al2O3-SiO2) DepositsCharacterization of TBC Systems with NiPtAl or NiCoCrAlYTa Bond Coatings after Thermal Cycling at 1100?C: A Comparative Study of Failure MechanismsDepth Distribution of Residual Stress in Graded (Ti, Al) N Coating and Fatigue Properties of Coated Stainless SteelSolid Reactions between Enamel and O-Phase Ti-Al-Nb Intermetallics at 800 ?CCompositional Factors Affecting the Oxidation Behavior of Pt-Modified ?-Ni+??-Ni3Al-Based Alloys and CoatingsMicrostructural Evolution of Slurry Fe Aluminide Coatings during High Temperature Steam OxidationThermodynamic Modelling of the Corrosive Deposits in Oxy-Fuel Fired BoilersDevelopment of a Laboratory-Scale Pilot for Studying Corrosion on MSWI Heat ExchangersFireside Corrosion in Energy Recovery Boilers and Maintenance IssuesFireside Corrosion of Stainless and Low Alloyed Steels in a Waste-Fired CFB Boiler; The Effect of Adding Sulphur to the Fuel Steam Oxidation of Advanced Steam Turbine AlloysNew Approaches to Improve High Temperature Corrosion Resistance in Chlorine-Based AtmospheresComparison between Current Methods for Measurement of High Temperature Corrosion of Boiler Steels in Steam EnvironmentsScale Growth on Austenitic Alloys under KCl Deposits at 500?CStudy of Oxyhydroxides Formation on P92 Steel on Al-CVD Coating in Contact with Ar+20% H2O at 650?C by TG-Mass SpectrometryAl-Mn CVD-FBR Protective for Steam Corrosion ApplicationsEvaluation of Al-Hf Coating on Ferritic Steels by CVD-FBR Technology in Steam OxidationAlkali Induced Corrosion of 304-Type Austenitic Stainless Steel at 600?C; Comparison between KCl, K2CO3 and K2SO4Corrosion in Biomass Combustion SystemsDevelopment of Strain in Oxides Grown in Steam TubesSlag-Refractory Interaction in Slagging Coal GasifiersAltering Corrosion Response via Grain Boundary EngineeringModelling of Corrosion Induced Stresses during Zircaloy-4 Oxidation in Air Thermodynamic Modelling of the Destruction of the Surface Cr2O3 on Alloy 230 in the Impure Helium Atmosphere of a Gas Cooled ReactorComparison of the High Temperature Surface Reactivity in Impure Helium of Two Materials for Gas Cooled ReactorsKinetic Study of the Low Temperature Internal Oxidation of Nickel Based Model Alloys Exposed to PWR Primary WaterChemical Evolution in the Substrate due to Oxidation: A Numerical Model with Explicit Treatment of Vacancy Fluxes Corrosion of T91 Steel in LBE: Contribution to the Study of the Pb?Bi?O?Fe?Hg System - Thermodynamic Description of PbO?Fe2O3Electrochemical Study of the Corrosion of Metals in Molten FluoridesInfluence of Al on the High Temperature Corrosion Behaviour of Inconel 617 in VHTR Primary Coolant AtmosphereOxide Layers Mechanical Properties for Ni Base Alloys in HTR EnvironmentA Review of Haynes? 230? and 617 Alloys for High Temperature Gas Cooled ReactorsHigh Temperature Oxidation of Fe-9Cr-1Mo Steel in Liquid MetalCorrosion Mechanisms of Ni-Base Alloys in Pressurized Water Reactor Primary ConditionsCharacterization of the Oxide Films Formed at the Surface of Ni-Base Alloys in Pressurized Water Reactors Primary Coolant by Transmission Electron MicroscopyOverview of Coating and Compatibility Research for Fusion Energy in the U.S.New Experimental Loops for Research Reactor LVR-15Imaging by Photoelectrochemical Techniques of Laves-Phases ? Zr(Fe,Cr)2 Thermally Oxidized on Zircaloy-4An Expert Software for Multi-Layer Coatings Design in Surface EngineeringOxidation of Stoichiometric Nickel Ferrites Used as Inert Anodes for Aluminium Electrolysis in Molten Cryolite MixturesShort Term Oxidation of Stainless Steels during Final AnnealingCorrosion of MA754 and MA956 in a Commercial Aluminum MelterRelationship between Chromia Solubility and Superalloy Corrosion in Silicate Melts ? A First AttemptThe Oxidation Behaviour of Pack-Treated Heavy Refractory AlloysCorrosion of Lead Glasses by SO2 GasMetal Dusting Behaviour of Alloy800H in Laboratory Carbonaceous Environments under High PressureOxidation Behavior of Wrought Gamma-Prime Strengthened AlloysCharacterization and Failure Analysis of Incoloy 800 Used as Thermowell Subjected to High Temperature Erosion-CorrosionMechanism of Catalytic Coke Formation and Some Means to Limit it in Refinery ProcessesModelling the Development of Type I Hot Corrosion on Coated and Uncoated Single Crystal SuperalloysEnhanced Internal Oxidation as Reason for Breakdown of Protective Chromia Scales on FeCr-Alloys in Water Vapour Containing GasesCyclic Oxidation of Two FeCrAlRE Foils at 1100 ?C - The Influence of the Concentration of Minor Alloying Elements on Scale MicrostructureEvaluation of Al2O3 MOCVD Coating for Titanium Alloys Protection under Severe Conditions at High Temperature On the Loss of Protective Scale Formation in Creep-Resistant, Alumina-Forming Austenitic Stainless Steels at 900?C in AirEffect of Lanthanum Sol-Gel Coating on the Oxidation Behaviour of the AISI 304 Steel at 1000?CHigh Temperature Corrosion of the Si-Mo Cast Iron in Exhaust AtmosphereOn the Effect of Surface Treatment to Improve Oxidation Resistance and Conductivity of Metallic Interconnects for SOFC in Operating ConditionsHigh Temperature Sulphidation Behavior of Fe20Cr6Al-Y,Hf SteelMultifunction High Temperature Coating System Based on Aluminium Particle TechnologyInvestigation of Oxide-Nucleation on Ferritic FeCr Interconnect Alloys for Solid Oxide Fuel Cells Exposed to Anode and Cathode Gases at 850?COxidation and Corrosion Effects on Thermal Fatigue Behaviour of Hot Work Tool Steel X38CrMoV5 (AISI H11)Investigation of Thin Coatings from Mn-Co-Fe System Deposited by PVD on Metallic Interconnects for SOFC ApplicationsThe Effect of Ca-Rich Deposits on the High Temperature Degradation of Coated and Uncoated SuperalloysPerovskite and Spinel Functional Coatings for SOFC Metallic InterconnectsA Model for Transitions in Oxidation Regimes of ZrB2Investigation of the Development Processes of Self-Organizing, Protective Oxide Scales and Wear Resistant Surface Layers on the Fe-44%Cr-1%Ni-4%Al-0.3%La AlloyThe Effect of Water Vapour and Sulphur on Corrosion Mechanisms of SteelsEffects of Microstructural Arrangement on Hot Corrosion Resistance of a Pb-Sb Alloy for Battery GridsInfluence of Tantalum on the Rates of High Temperature Oxidation and Chromia Volatilization for Cast (Fe and/or Ni)-30Cr-0.4C AlloysStudy of the Behavior in Oxidation at High Temperature of Ni, Co and Fe-Base Alloys Containing Very High Fractions of CarbidesMicrostructure Influence on Residual Stresses in Growing Chromia Oxide Films as Determined by In Situ High Temperature Raman SpectroscopyHigh Resolution MicroRaman Study of Blisters in Cr2O3 Thermal Oxide FilmsYttrium Implantation and Manganese Addition Element Effects on the High Temperature Oxidation Resistance of a Model SteelComments on the Quantification of Mechanical Adhesion Energy of Thermal Oxide Scale on Metallic Substrate Using Tensile TestThermal Alumina Scales on FeCrAl: Characterization and Growth MechanismRelation between Synthesis Process, Microstructure and Corrosion Resistance of Two Yttrium SilicatesThe Effects of Reactive Element Oxide Coatings on the High Temperature Oxidation of FeCrAl AlloyThermal Fatigue of Anticorrosive Coatings and Multilayer Coatings: A Performance Index ApproachInfluence of Interstitials Content on the Sensitivity of Alloy 718 to Oxidation Assisted Intergranular FractureOxidation Behavior of Mo Containing AlloysOxidation of Some Titanium Alloys in Air at Elevated TemperaturesDirect Measurements of the Chromium Activity in Complex Nickel Base Alloys by High Temperature Mass SpectrometryThe Nitridation, a Way to Improve High Temperature Oxidation Behaviour of AISI 304High Temperature Oxidation and Oxidation-Induced Degradation of Alumina FormersThe Influence of H2O on Iron Oxidation at 600?C: A Microstructural StudyThe Effect of Additional Elements on Oxide Scale Evolution of Fe-20at.%Cr-10at.%Al Alloy at 900 ?C in AirOn the Mutual Interaction between Mechanical Stresses and Internal Corrosion during Isothermal and Cyclic Oxidation of Nickel-Base SuperalloysThermal Effects of Continuous Laser Treatment on Ti-6 Al(wt%)-4V(wt%) Titanium AlloyVoid Formation in Growing Oxide Scales with Schottky Defects and P-Type ConductionOxidation and Nitridation of Pure Chromium at Elevated Temperature in Synthetic Air ? Effect of Silicon AdditionThe Effect of Copper and Ceria Additions on the High Temperature Oxidation of NickelOxidation Performance of High Temperature Mo-Si-B Alloys and CoatingsThe Effect of CaO Coatings on the Oxidation Behaviour of Polycrystalline Nickel between 800 and 1200 ?C The Effect of Thermal Expansion on Spallation Behavior of Fe-Base Alumina-Forming AlloysVoid Formation and Filling under Alumina Scales Formed on Fe-20Cr-5Al Alloy Thin FoilsThe Role of Zr in the High-Temperature Oxidation of Fe3AlWhy the Growth Rates of Alumina and Chromia Scales on Thin Specimens Differ from those on Thick SpecimensImpedance Spectroscopy Applied to Metal Corrosion Study in Silicate MeltsManganese Effect on Isothermal High Temperature Oxidation Behaviour of AISI 304 Stainless Steel
In Situ Thermal Gradient Controlled Investigation of Spallation -Experimental Design and Preliminary ResultsTernary and Quaternary Interdiffusion in ? (fcc) Fe-Ni-Cr-X (X = Si, Ge) Alloys at 900?C Kinetics of Some Iron-Based Alloys in Industrial CO2: Formation of W?stite PhaseCyclic Oxidation Behavior of Sputtered Nanocrystalline Coating with Yttrium Additions in AirUse of the Sessile Drop Method to Understand the Behaviour of Self Healing Ceramic Matrix CompositePhotoelectrochemical Characterisation of Chromia Scales Thermally Grown on Various Metal SubstratesEffects of Water Vapour on the Oxidation of Chromia Formers
