Sonstiges, Englisch, 1270 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, 1270 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-03859-947-0
Verlag: Trans Tech Publications
The major concern of this book is high-temperature corrosion; a form of surface disintegration that leads to high running costs, as well as to environmental and/or security problems.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
A Brief History of the 'Les Embiez HTC Symposia'Kinetic Study of the Oxidation by Oxygen of a Zirconium Based Alloy: ZrNbO Differences between the Pre- and Post-Transition StagesInternal Precipitation of Al2O3 and Cr2O3 in Austenitic Alloys Recent Improvements in the Understanding of Alumina Film Formation and DurabilityInternal Nitridation during Creep Loading of Polycrystalline Ni-Base SuperalloysRelation Between Oxidation Kinetics and Chromium Diffusion in Stainless SteelsRole of Minor Element Addition in the Formation of Thermally Grown Alumina ScalesKinetic Investigations on Salt Melt Induced High-Temperature Corrosion of Pure MetalsEffects of Titanium on a Ferritic Steel Oxidation at 950?CYttrium Implantation and Additional Element Effects on the Oxidation Behaviour of Reference Steels at 973 KPresentation, Calibration and First Experiments Using a New Thermobalance for Experiments in Sulfur Vapor AtmospheresX-Ray Diffraction to Study the Oxidation Mechanism of Chromium at Elevated TemperaturesStudy of the Sulfur Segregation for a TBC SystemIs KCl(g) Corrosive at Temperatures Above its Dew Point? Influence of KCl(g) on Initial Stages of the High Temperature Corrosion of 11% Cr Steel at 600?CThe Effect of Silicon Addition on the High Temperature Oxidation of a Fe-Cr AlloyExperimental Study of the Interactions between Oxidation and Structural Defects Influence of Temperature and Composition of SO2/O2 Atmosphere on the Surface Morphology of Alumina Scales Formed on FeCrAl SteelModelling of the Kinetic Transition in Zirconium Based Alloys: Application to the Oxidation of Zircaloy-4 by Water Vapour Computer Simulation of Morphology Evolution of Oxide Scales during OxidationEffect of Nanocrystallization on Hot Corrosion Behavior of K38G Alloy with Sulfate Deposit at 900?CFirst Principle Calculation of Oxidation of MetalsHigh Temperature Oxidation of Fe-3Si AlloyA New Interpretation of the ''Breakaway'' Oxidation Behaviour Observed at High Temperature on 304 Stainless SteelNano-Oxidation of Cu(100) Investigated by In situ UHV-TEMEnvironmental Protection of Metal Structures at High Temperature: State of the Art and Future TrendsEffects of Platinum on the Interdiffusion and Oxidation Behavior of Ni-Al-Based AlloysEnvironmental and Thermal Protection of ?-TiAl Alloys Investigation of Oxide Formation during Short-Term Oxidation of Model NiAl AlloysEvidence for the Formation of Al-Rich Reservoir Phases Resulting from Interdiffusion between MCrAlY Coating and Ni-Based SubstrateEffect of Pt Additions on the Sulfur Segregation, Void Formation and Oxide Scale Growth of Cast Nickel AluminidesDevelopment and Oxidation of a RexOy- Modified Chromizing CoatingLow Mass Bondcoat for Robust Thermal Barrier CoatingsHigh Temperature Oxidation Behaviour of Aluminide Coatings Obtained by Pack CementationEffects of Silica Nano-Particle Coatings on High-Temperature Oxidation of AISI 321On the Understanding of TGO Growth and Spallation in Nickel AluminidesEffect of an Enamel Coating on Hot Corrosion Behavior of the Multi-Arc Plated NiCrAlY Composite CoatingHigh Quality Aluminide and Thermal Barrier Coatings Deposition for New and Service Exposed Parts by CVD TechniquesHigh Temperature Al/Si Diffusion Coatings Deposited by Chemical Vapor Deposition in Fluidized Bed Reactors (CVD-FBR)Coating Design Using Computational Codes for Steam Oxidation ConditionsEffect of Electrodeposited Thin Films Containing Yttrium on High Temperature Oxidation Behaviour of Ni Base AlloysThe Effect of Silicon on Cyclic Oxidation Behavior of Aluminide Coatings on Superalloy IN-738LCMicrostructural Transformation in Platinum Aluminide Coated on CMSX-4 SuperalloyHigh Temperature Oxidation of (Ti,Al)N and (Ti,Al,Y)N Coatings on a Steel Prepared by Arc Ion Plating (AIP)How to Design a Nano-Multilayered PVD Nitrides Based Coating Regarding its Resistance Against Oxidation and Aqueous Corrosion ?Failure Analysis of High-Temperature Oxidation for Plasma Sprayed Thermal Barrier Coating Systems with Different Coating CharacteristicsZirconium Modified Aluminide by a Vapour Pack Cementation Process for Thermal Barrier Applications: Formation Mechanisms and PropertiesMeasurement of Residual Stress in Thermally Grown Oxide Layers in Thermal Barrier Coating Systems - Development of Non-DestructiveTest MethodsCorrosion Performance of Unbalanced Magnetron-Sputter Coatings in Atmospheres Containing 1%H2S or H2S + 1%HCl at 600?CNovel Low Temperature Diffusion Coatings for Heat Exchanger MaterialsOn the Development and the Oxidation of Novel Ni-Cr and Ni-Al Nanocoatings by Composite ElectrodepositionEvolution of Oxide Scale Morphology on (Ni,Pd)Al Coating during High Temperature Oxidation in AirCyclic Oxidation of Chromia-Scale Forming Alloys: Lifetime Prediction and Accounting for the Effects of Major and Minor Alloying AdditionsEffect of Microstructure on the High Temperature Oxidation and Pesting Behaviour of MoSi2Cyclic Oxidation Behaviour of Halogen Implanted Ti-46.5Al-4(Cr, Nb, Ta, B)High Temperature Properties of a New Powder Metallurgical FeCrAl AlloyThe Oxidation Behaviour of the Commercial FeCrAlRE Alloys Aluchrom YHf and Kanthal AF Foils in Air at 800?-950?COptimisation of In-Service Performance of Boiler Steels by Modelling High Temperature Corrosion ? EU FP5 OPTICORR ProjectNumerical Model for Oxide Scale Growth with Explicit Treatment of Vacancy FluxesEffect of Combined Yttrium and Zirconium Additions on Protective Alumina Scale Formation on High Purity FeCrAl Alloys during Oxidation in the Temperature Range of 1200 to 1300?CHigh Temperature Corrosion of TiAl - 2-5At-%X (X=Ag,Cr,Nb) Alloys in SO2 and H2S-H2 AtmospheresThe Quantitative Role of Surface Doped Fluorine for the Improvement of Oxidation Resistance of TiAl in AirThe Effect of Aluminium Ion Implantation on the Oxidation Behaviour of Fe-xCr-yAl AlloysIn Situ - Investigation of the Oxide Scale Formation and Recrystallization of a FeCrAl FoilImportance of Beta Phase Formation for the Oxidation Resistance of TiAl Significantly Improved by Ion Implantation of Beta FormersComparing Different Methods to Determine the Intergranular Oxidation Damage on a Nickel Based SuperalloyMetal Dusting Performance of Nickel-Base AlloysThe Use of Plasma Sprayed Laser Remelted Corrosion Resistant Metallic Coatings to Inhibit Metal DustingThe Role of Discontinuous Precipitation in Metal DustingExperimental Analysis and Computer Simulation of Inward Oxide Growth during High-Temperature Corrosion of Low-Alloy Boiler SteelsInfluence of Aluminum Depletion Effects on the Calculation of the Oxidation Lifetimes of FeCrAl AlloysLow Temperature Oxidation of Pure Iron: Growth Kinetics and Scale MorphologiesPredicting Equipment Lifetimes with High Temperature Corrosion DataAn Interfacial Thermodynamic Model for the Oxidation Kinetics of a Metal: Epitaxial Stress EffectsLuminescence-Based Characterization of Protective Oxides: from Failure Mechanisms to Non-Destructive EvaluationMeasuring Adhesion of Cr2O3 and Al2O3 Scales on Fe-Based AlloysDirect Examinations of Oxide Scales upon Cooling: A New Way to Analyse Oxide Scale SpallationInfluence of Environment on Creep Properties of MC2 Single Crystal Superalloy at 1150?CPiezo-Spectroscopy Studies of Stress and Damage Evolution in the Thermally Grown Oxide in TBCsCyclic Oxidation Modeling and Life PredictionGrowth Strains and Stress Relaxation in Alumina Scales during High Temperature OxidationStudy of the Thermal Oxidation of Fe-15 Cr by Combined Raman and Photoelectrochemical ImagingMulti-Sample Thermobalance for Rapid Cyclic Oxidation under Controlled AtmosphereA Thermo-Kinetic Study of Titanium Oxidation Assisted by a Nd-YAG Pulsed LaserOxidation Kinetics and Scale Spallation of Iron-Chromium Alloys with Different Titanium ContentsDeflection and Three Point Bending Tests in SEM: Mechanical Characteristics of Oxide FilmsModelling the Deformation and Fracture of an Al2O3 Scale Developed on Fe3Al during CoolingThe Role that Interacting Failure Mechanisms Have on the Lifetime of APS-TBC under Oxidizing ConditionsCyclic Oxidation Kinetics Modeling of NiAl Single CrystalEffect of Cycle Frequency on High Temperature Oxidation Behavior of Alumina-Forming Coatings Used for Industrial Gas Turbine BladesOxide Growth Stresses in an Austenitic Stainless Steel Determined by Creep ExtensionVolatility of Common Protective Oxides in High-Temperature Water Vapor: Current Understanding and Unanswered QuestionsOxidation of Stainless Steel in H2O/O2 Environments ? Role of Chromium EvaporationInteraction between Mechanical Loading in Creep and Reactivity of Zircaloy-4 at 450?CEffect of Alloying Additions in Ferritic 9-12%Cr Steels on the Temperature Dependence of the Steam Oxidation ResistanceThe Oxidation Behavior of Fe-Al AlloysChemical Potential Distribution and Void Formation in Magnetite Scale Formed in Oxidation of Iron at 823KThe Use of Model Alloys to Develop Corrosion-Resistant Stainless SteelsThe Effect of Water Vapour on the Oxidation of Stainless Steels Studied in Situ by X-Ray Diffraction Isothermal Oxidation Behaviour of a Hot-Work Tool SteelOxygen and Water Vapour Oxidation of 15Cr Ferritic Stainless Steels with Different Silicon ContentsHigh-Temperature Oxidation Behaviour of a Hot Isostatically-Pressed Si3N4-HfB2 Ceramic CompositeOxidation and Corrosion Properties of the MoAlxSi2-x (C40)/Al2O3 CompositeInfluence of Grain-Size on Ionic Conductivity of Pure and Dense a-Al2O3 in the Temperature Range 400 - 1000?CAn Evaluation of the Performance of Candidate Gas Turbine Abradeable Seal Materials Exposed to a High Temperature Combustion AtmosphereRole of Alkali Hydroxides in the Fireside Corrosion of Heat Transfer Surfaces, a Practical ApproachCorrosion Experience in the Gasefier of the Elcogas IGCC Power Plant in SpainNucleation and Growth of Oxide Constituents on NiCoCrAlY Bond Coats during the Different Stages of EB-PVD TBC Deposition and Upon Thermal LoadingDevelopment of a New Test Method of High Temperature Corrosion in Gas Turbines Based on Thermodynamic ModellingDevelopment of Burner Rig Corrosion Tests for Gas Turbine Alloys: Study of Protective Metallic Coatings and Inhibitors for Hot Salt CorrosionInfluence of Moisture on the Hot Corrosion of Metals in Nitrate and Sulfate MeltsCorrosion of Metallic Materials in Combustion Gas Condensates at 250?CDevelopment of Hot Corrosion on Coated Single Crystal SuperalloysInnovative Coating for Aggressive Environments: Land-Based Gas Turbine ApplicationsSteam Oxidation of Slurry Aluminide Coatings on Ferritic Steels for Advanced Coal-Fired Steam Power PlantsA Pilot Plant Study of the Effect of Alkali Salts on Initial Stages of the High Temperature Corrosion of Alloy 304LHigh Temperature Corrosion of Superheater Tubes in Waste Incinerators and Coal-Fired PlantsHigh Temperature Oxidation Behaviour of Boiler Steels under Simulated Combustion GasesLaboratory Testing for Evaluation of Steels and Alloys Used in Superheater Area of Boilers for Biomass-Based FuelsModeling of Low-Temperature Oxidation of Steel Tubes in Biomass CombustionField Investigation of Steamside Oxidation of TP347HInfluence of KCl Deposit Morphology on Corrosion of Austenitic Alloys at 500?CSteam Oxidation Resistance of Selected Austenitic SteelsErosion-Corrosion of Alloys in Power Plant Heat Exchangers at Elevated TemperaturesSteam Corrosion Resistance of New 12% Cr Ferritic Boiler SteelsHigh Temperature Interaction of Pure Cr with KClFundamental Studies on Alkali Chloride Induced Corrosion during Combustion of BiomassOxidation-Sulfidation Behavior of Multiphase Mo-Si-B AlloysMaterials for Solid Oxide Fuel Cells: the Challenge of their StabilityHigh Temperature Corrosion of Steels in Liquid Pb-Bi AlloyInterfacial Interactions between some La-Based Perovskite Thick Films and Ferritic Steel Substrate with Regard to the Operating Conditions of SOFCPhase Transformation and Growth of Alumina on a Thin FeCrAl-RE Foil at Around 900?CState of the Sub-Surface Microstructure of Carbides Strengthened Cast Superalloys after High Temperature Oxidation ? Use of Thermodynamic Modelling for a Better UnderstandingThree Examples of High-Temperature Corrosion of Metals by Molten GlassesA New General and Rapid Method for Investigating Hot Corrosion: Preliminary Tests on Electrodes for Molten Carbonate Fuel CellsApproach of the Corrosion Behaviour of T91 Steel in Lead or Lead-Bismuth Liquid BathHigh Temperature Performance of Ferritic Stainless Steels Manufactured by Powder-MetallurgyHigh Temperature Oxidation Behaviour of Base Material and Laser-Weld Specimens of a Thin FeCrAl-RE Foil at Around 900?CCorrosion of High Temperature Alloys in the Coolant Helium of a Gas Cooled ReactorInfluence of the Microstructural Texture of Cast Superalloys on their High-Temperature Oxidation BehaviourOxidation and Hot-Corrosion Behavior of Sputtered Ti-48Al-8Cr-2Ag Nanocrsytalline Coating
