Sonstiges, Englisch, 1010 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, 1010 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-03859-877-0
Verlag: Trans Tech Publications
The degradation of materials and coatings in aggressive environments continues to be of great relevance to a wide range of industrial applications. The topic is of vital economic concern to the transportation, energy generation, and chemical processing industries in the developing, as well as the developed, nations of the world. The dual thrusts of conservation of resources and protection of the environment here strongly influence the tone of the technical submissions and thus again reflect the world-wide concern.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
The Future for High Temperature Materials and Coatings in the New MillenniumImpurity Segregation to Scale/Alloy Interfaces and its Effect on Interfacial PropertiesHigh-Temperature Oxidation Kinetics of Non-Oxide Monolithic and Particulate Composite CeramicsCarbon-Induced Corrosion of Metals and AlloysPractical Aspects of the Reactive Element EffectKinetic and Morphological Development of Internal Precipitates in Iron-Chromium AlloysMechanisms and Prevention of Corrosion in Carbonaceous GasesThin Film Hot Corrosion Studies of Oxidised and Carburised 304 Stainless SteelAir Oxidation of a Cu-30Ni-25Fe Alloy at 700-900?CInitial Oxidation Stages of NickelThe Surface Kinetics of the Initial Oxidation Stages of Copper as Investigated by In Situ Ultra-High Vacuum Transmission Electron MicroscopyMicrostructure Evolution of Alloy 600 during Dry OxidationStudy of the Influence of an Applied Stress on the Oxidation at 550?C of Ni (100) and Ni (111) Single CrystalsHigh Temperature Air Oxidation of Co-Ta AlloysInfluence of Composition and Phase Distribution on the Oxidation Behaviour of NiCoCrAIY AlloysEvidence for Suppression of the Oxidation of a Fe 2.25Cr 1 Mo Steel by Traces of SO2Short-Term High Temperature Oxidation of Lamellar Cast IronEvolution of Scale Microstructure as a Function of Scale Oxide Thickness during Oxidation of Nickel at 700?CHigh-Temperature Corrosion of Cast Irons and Cast Steels in Dry AirMicrostructure of Oxidised 304L Steel and the Effects of Surface Roughness on Oxidation BehaviourInfluence of Additives on Characterisation and High Temperature Corrosion of Electrodeposited Copper and NickelKinetic Study of the Oxidation by Water Vapour of a Zirconium-Based Alloy: Recrystallised Zircaloy-4The Kinetic Behaviour of Metals in Water Vapour at High Temperatures: Can General Rules Be Proposed?High Temperature Corrosion Behaviour of some Boiler Steels in Pure Water VapourThermal Oxidation of a Soft Magnetic Alloy Co - 10Fe - 5CuCorrosion of Zirconium Alloys: Link between the Metal/Oxide Interface Roughness, the Degradation of the Protective Oxide Layer and the Corrosion KineticsCorrosion Mechanism at the Gas-Solid-Liquid Triple Line for Aluminium Droplets on Alumina Substrates under VacuumLong Term Oxidation of Fecral ODS Alloys at High TemperatureThe Influence of Water Vapor on the Corrosion of Chromia-Forming SteelsMicrostructural Changes in the Sub-Surface Area of Ni-Base Superalloys as a Consequence of Oxide Scale FailureOxidation Behaviour of ?-FeAlCr Coating Produced by Close-Field Unbalanced Magnetron Sputter DepositionTEM Observation of Phase Transformations of Alumina Scales Formed on Al-Deposited Fe-Cr-Al FoilsThe Effect of Yttrium on the Oxidation of a Commercial Fe-Cr-Al Alloy at 1173 KSurface Treatment and Cold Working as Tools to Improve Oxidation Behaviour of Chromium SteelsMechanisms Involved by Reactive Elements upon High Temperature Chromia Scale GrowthOxide Defects and Damage Processes in Iron-Based Alumina-FormersComparison of the Cyclic-Oxidation Behavior between AISI 304 and Low-Nickel Austenitic Stainless SteelsAbnormal Oxidation of Stabilized Ferritic Stainless Steels in Water VaporIsothermal Oxidation of ?-NiAl Alloys and Sputtered Coating at 1000?C in AirTransport Phenomena in the Scale Formed on Cr in SO2 at 3x104 Pa and 105 PaFormation and Mechanism of Carbon-Containing Oxide Scales by Oxidation of Carbides (ZrC, HfC, TiC)Effects of High Water Vapor Pressures on Oxidation of SiC-Based Fiber-Reinforced CompositesEffect of Ion Implantation of High Melting Point Elements on the Oxidation Behavior of TiAlA Phenomenological Model for High Temperature Oxidation of Si3N4-TiN CompositesOptimizing the Imperfect Oxidation Performance of Iron AluminidesThe Influence of Water Vapor on the Oxidation of MoSi2 AT 450?CCreep and Oxidation Behaviour of a TiN-TiB2 Composite MaterialInfluence of the Oxidation Conditions of the Fibres on the Mechanical Properties of Al Matrix Composites Reinforced with Ni-Based FibresThe Effectiveness of Hard Coatings in Protecting Steels against Erosion-Corrosion in Oxidizing Environments at High TemperatureMechanical Stresses: Inhibitor of Catalyst of High Temperature Oxidation?Optimizing Scale Adhesion on Single Crystal SuperalloysCoupling between Oxidation and Mechanical Stresses. Application to the Oxidation of Ni-20Cr FoilsHigh-Temperature Erosion-Corrosion of Superheater Materials and Coatings in Chlorine-Containing EnvironmentsReactive Element (Y,Ce) Effect on Stresses Determined In-Situ during Iron Oxidation at 800?CCracking and Spallation of Chromia and Alumina Scales during Thermal CyclingA Microscopy Study of Spalling and Growth Mechanism of the Oxide Scale Formed on Pd Modified Nickel AluminumErosion Corrosion of Thermally Sprayed Fe12Cr and Cr3C2-NiCr CoatingsErosion-Corrosion of 304 Tubes in Bubbling Fluidised Beds at 550?CMechanical, Kinetic and Morphological Correlations during the Scale Growth of Niobium and Zirconium OxidesA Mechanism for the Erosion of EB PVD TBCSInvestigation of the Spallation of Oxides Grown on Thermally Cycled Heat Resistant Cast SteelsIn Situ Measurement of Stresses in Alumina Scales by High Temperature X-Ray DiffractionDeformation of FeO Oxide Scales upon Tensile Tests at 600-1200?CInvestigation of Oxide Film Growth Stresses by Finite Element Modeling and Deflection TestsHot Corrosion of Nickel-Base Alloys by Alkali-Containing Sulfate DepositsHigh Temperature Oxidation Resistant Coatings Produced by Electro-Spark DepositionTechnological Aspects of Forming TBC-EB Ceramic LayersLow Thermal Conductivity EB-PVD Thermal Barrier CoatingsEffects of Bond-Coat Preoxidation and Surface Finish on Isothermal and Cyclic Oxidation, High Temperature Corrosion and Thermal Shock Resistance of TBC SystemsHigh Temperature Oxidation of Thermal Barrier Coating Systems on RR3000 Substrates: Pt Aluminide Bond CoatsDegradation and Life Prediction of Gas-Turbine Duplex CoatingsA Study of the Corrosion Behaviour of Magnetron-Sputter Deposited Coatings in a Reducing-Sulphidising Atmosphere at 600?CCyclic Oxidation of Two Bond Coats in Thermal Barrier Coating Systems on CMSX-4 SubstratesThermal Fatigue of Protective Coatings on CMSX-4 SuperalloyEffect of Aluminum Thermal Spray Coating on the Corrosion Resistance of a Steel Under Oxidant Atmosphere in a Fluid Catalytic Cracking RegeneratorIsothermal Oxidation of Conventional and Pt Modified Aluminide Diffusion Coatings on a Ni Based SuperalloyMetallic Precipitate Formation during Alumina Growth in a FeCrAl-Based Thermal Barrier Coating Model SystemEffects of Platinum Additions on the Adherence of Alumina Scales to CVD Aluminide Bond CoatingsMicrostructural Characterization of the Oxide Scale Grown at the Interface between PSZ Top Coat and MCrAIY Bond CoatAn Exploratory Evaluation of the Elaboration and Protection Properties of Chromium- or Aluminum-Containing Laser-Surfaced Coatings on TitaniumWhy do EB-PVD NiCoCrAIY Coatings Oxidize Faster than their LPPS Counterparts?The Influence of Bond Coat Surface Roughness and Structure on the Oxidation of a Thermal Barrier Coating SystemDegradation of Advanced MCrAIY Coatings by Oxidation and InterdiffusionSilicide Coatings for Niobium: Mechanisms of Chromium and Silicon Codeposition by Pack CementationPassivation of Nickel-Base Superalloy Inconel 690 by Pack-Cementation Chromium CoatingsEffect of Enamel Coating on the Corrosion of Ti60 AlloyCyclic Oxidation Performance of a CVD-FBR Aluminised 18Cr-8Ni Stainless SteelAl Slurry Coatings for Molten Carbonate Fuel Cell Separator PlatesCritical Issues in Laser Surface Alloying to Form High Temperature Corrosion Resistant Alloys and Near Net Shape ComponentsAn Evaluation of Tests for the Adhesion of Thermal Barrier CoatingsInvestigation of a New Methodology in High Temperature Oxidation Application to Commercial Austenitic SteelsRole of the Microstructure on the High Temperature Oxidation Properties of the Intermetallic Compound NbAl3A Pre-Normative Study on the Cyclic Oxidation Behaviour of PM Chromium: The Effect of Experimental ParametersElectrochemical Impedance Study of the Corrosion of Fe-Cr Alloys in Molten (Li,K)2CO3 Eutectic MixtureIn Situ High Temperature X-Ray Characterization of Yttrium Implantation Effect on Pure Iron Oxidation at 700?CMicrostructural and Oxidation Study of Chromia Forming Molybdenum-Tungsten Based AlloysMaterials for Solid Fuel Fired Gas Turbines: Burner Rig and Laboratory StudiesRaman Spectroscopy Determination of Residual Stresses at Room Temperature in Chromia Scales Grown on Pure Chromium in Oxygen and in Water VapourIn-Situ Impedance Spectroscopy Measurements of Fe-Cr-Al Alloys in a Flame PlasmaEffects of Fuel Composition and Combustion Parameters on Furnace Wall Fireside Corrosion in Pulverised Coal-Fired BoilersCorrosion of High Temperature Alloys by Molten GlassCorrosion Resistance of Alloys in IGCC EnvironmentExploitation of Data of Alloy Corrosion in High Temperature GasesThermodynamic Stability Calculations in Predicting Corrosion Behaviour at Elevated TemperatureSuperheater Materials Testing for USC Boilers: Steam Side Oxidation Rate of 9 Advanced Materials in Industrial ConditionsSteam Oxidation Resistant Coatings for Steam Turbine Components: A Feasibility StudyMaterials Performance in Solid Fuel Gasification SystemsMetal Dusting Exposures of Modified Stainless SteelsInfluence of Surface Preparation on the Corrosion of Steels in Simulated Waste Incineration EnvironmentsCorrosion Mechanisms and Failure Cases in Waste Incineration PlantsInteractions between Oxidation and Deformation at High TemperatureProtection of Materials at High Temperature. What's Beyond Coatings?Oxidation by Oxygen of Liquid Al-Mg Alloys during Elaboration ProcessHydrothermal Corrosion of Carbon-Based Materials
