Material Science and Engineering Technology V

Erscheinungsjahr 2017
ISBN: 978-3-0357-1028-1
Verlag: Trans Tech Publications

Buch, Englisch, 440 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 880 g

In this book are presented papers selected by results of 5th International Conference on Material Science and Engineering Technology (October 29-31, 2016, University of Tokyo, Japan). The presented papers describe a wide range of research works and engineering solutions in area of modern materials and technologies of them syntesis and processing. We hope this collection will be interesting and usefull for many engineers and researchers whose activity are related with use of modern materials and technologies in the different branches of industry.

Autoren/Hrsg.

He, Yunqiu

Agarwal, Ramesh K.

Delaunay, Jean-Jacques

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Preface, Committee
Chapter 1: Composites and Polymers
Desorption Behavior of Epoxy/Amine-Coated Polyester Triangular Bar Composites Pre-Exposed to Acid Environment
Study on the Mechanism of Pores Deformation in Aluminium Composites under Hot and Cold Upsetting Processes
Preliminary Study on the Acoustical, Dielectric and Mechanical Properties of Sugarcane Bagasse Reinforced Unsaturated Polyester Composites
Tensile Properties of Unidirectional Kenaf Polypropylene Composite at Various Temperatures and Orientations
Tensile Properties of Woven Carbon/Kevlar Reinforced Epoxy Hybrid Composite
Effect of Replacing Carbon Black with Surfactant-Modified Natural Feldspar on Mechanical Properties of Natural Rubber Composites
Effect of Type of Amine Salt and Surfactant on the Water Sorption and Flexural Properties of Modified Zeolite/Polyester Composites
Development, Manufacturing and Characterization of a New Composite Prepared from Cyperus corymbosus Rotth and Poly(Vinyl Chloride)
Fire Retardation Mechanism of PVC Composite Filled with White Rice Husk Ash for Ceiling Board Applications
Study on Utilization of Palm Frond for Wood Plastic Composite
Improving Interfacial Adhesion of Sub-Micro PA6 Composites with De-Sized Carbon Fiber
Morphological and Spectral Analysis of Polystyrene-Block-Polyisoprene-Poly(Butyl Acrylate) Triblock Copolymer
Modeling the Hardness and Mechanical Properties of Moulded Natural Rubber Pad
Effect of Replacing Carbon Black with Organo-Modified Bentonite and Acid-Activated Zeolite on Vulcanization Characteristics of Natural Rubber Tire Tread
Epoxidation of Waste Rubber/Zeolite Powder as Potential Filler for Epoxy Resin
Metal Organic Frameworks-Templated Hollow Mn2NiO4 Flower for Enhanced Supercapacitor Electrodes
Reinforcement of Stereolithography Resin with Silica-Based Fillers
RAFT Polymerization of Dual Responsive Hyperbranched-Star Copolymers of Methacrylic Acid and Poly(Ethylene Glycol)
Temperature Dependence of Degradation of Colored Oxo-Biodegradable Low-Density Polyethylene Films under Accelerated Thermal Aging
Chapter 2: Nanomaterials and Nanotechnology
Conductivity Improvement of Silver Nanowire Transparent Electrodes by Surface Plasma Treatment
Thermodynamics of Formaldehyde Removal by Adsorption onto Nanosilver Loaded Bamboo-Based Activated Carbon
An Experimental Evaluation of Solid Lubricant Based Nanofluids in Small Quantity Cooling and Lubrication during Grinding
Effect of Acid/Fiber Ratio on Physical Properties of Cellulose Nanofibers Extracted from Cassava Pulp
Effects of Nano Copper Additive on Thermal Conductivity of Magnetorheological Fluid at Different Environment Temperature
Photocatalytic Decomposition of Glycerol Solution on TiO2 Nanotube Arrays (TNTA) Doped with C and N to Produce Hydrogen
Molecular Oxygen Adsorbed on Gallium Doped Graphene: A First-Principles Study
The Physical and Photocatalytic Properties of N-Doped TiO2 Polycrystalline Synthesized by a Single Step Sonochemical Method at Room Temperature
Laterally Inhomogeneous Barrier Height Analysis for Thermally Annealed CuNiTi/p-InP Contacts
Chapter 3: Biotechnologies, Biomaterials and Technologies in Environmental Engineering
Modified Synthetic Fibers a Treatment for Heavy Metal Removal in Aqueous
Effect of Degrading Transparent Oxo-Biodegradable Polyethylene Plastic Bags to Water Quality
Effects of Various Pretreatment Variables on Hydrolysis of Lignocellulose to Produce Sugar in Bioethanol Production
Heat Effects from Far-Infrared Source towards Antioxidant Activity in Aquilariasubintegra Leaves
Copper-Treated Philippine Natural Zeolites for Escherichia coli Inactivation
Microwave-Irradiation Induced Fast Simultaneous Extraction of Methoxylated and Hydroxylated Phenolic Compounds from Orthosiphon stamineus Leaves
Hardness Removal from Water by Modified Starch
Enzymatic Activity of Immobilized Carbonic Anhydrase onto Amberlite XAD7
Optimization of Ultrasonic-Assisted Extraction of Polyphenolic and Flavonoids from Labisia pumila
Swelling and Crosslinked Formaldehyde Chitosan as Adsorbent for Metal Ion Cu (II)
A Comparative Performance of New Materials for Carbon Dioxide Removal in Absorption Process
Addition of Mo Zn Fe and Ag into HZSM-5 and NaZSM-5 Catalysts
Effects of Alkali and Thermal Treatment on the Ti6Al4V towards Apatite Deposition in Dulbecco’s Phosphate Buffered Saline (DPBS) Solution
Mechanical and Thermal Properties of Thermoplastic Film from Tacca leontopetaloides Starch Reinforced with Rice Husk Biochar
Preparation and Dye Removal Properties of Hyperbranched Polymeric Ionic Liquid/Poly(Vinylidene Fluoride) Composite Films
Properties of Composite Films from Sugarcane Bagasse, Coconut Coir, and Water Hyacinth Fibers/Poly(Vinyl Chloride)
Effect of Coating Adhesion on Turmeric Essential Oil Incorporated into Chitosan-Based Edible Coating
Effect of Sintering Temperature on Zinc Substituted Calcium Phosphate Ceramics
Microscopic Methods for Characterization of Selected Surface Properties of Biodegradable, Nanofibrous Tissue Engineering Scaffolds
Chapter 4: Materials and Technologies of Chemical Engineering
Development of Brominated Flame Retardants (BFRs) Analysis with Liquid Chromatography-Tandem Mass Spectrometry (LC/MS/MS) in Sewage Sludge Matrix
Photon-Induced L-Shell X-Ray Production Cross Sections for Lanthanides at 59.54 keV
Hydrogen Bonds-Enhanced Organoclay-Free Oil Based Drilling Fluid System
Interfacial Tension Measurement of Light Oil from Thailand to Enhance Oil Recovery for Surfactant Flooding Application
Study on the Preparation and Properties of Hybrid Lubricant for Invert Emulsion Drilling Fluids
The Study of Photocatalytic Oxidation of Benzyl Alcohol with g-C3N4 under Visible Light: Effect of pH and Salt
Molecular Dynamics Simulation Study of Lecithin Inhibiting Hydrate-Dissociation
Chapter 5: Design and Development of Fuel Cells and Batteries
Experimental Study on the Bundle Lithium-Ion Batteries Fire
The Morphology Effect on the Selectivity of SPEEK/ENR Membranes for Direct Methanol Fuel Cell
Optimization of the Microstructure of Molten Carbonate Fuel Cell Anode
Effects of SPEEK/Cloisite Concentration as Electrospinning Parameter on Proton Exchange Membrane for Direct Methanol Fuel Cell Application
Chapter 6: Design and Fabrication of Thin Films and Ceramics
Nanostructures and Properties of Vanadium Oxide Thin Film Prepared by Spray Pyrolysis Method
Physical Properties of CdSxTe1-x Thin Films Prepared by Close Spaced Sublimation Method
Influence of Annealing Temperature on the Properties of SnS Thin Films Prepared by Vacuum Thermal Evaporation
Effect of Post-Annealing Treatment on the Structure and Luminescence Properties of AIN:Tb3+ Thin Films Prepared by Radio Frequency Magnetron Sputtering
Growth Mechanism of Copper Oxide Fabricaticated by Potentiostatic Electrodeposition Method
Design of Reservoir Recognition Technique Component - Open Porosity in Non-Polarizing Electrodes
Preparation and Properties of CaO-MgO-Al2O3-SiO2 Glass-Ceramics from Granite Wastes
Chapter 7: Properties of Metals and Alloys, Processing Technologies
Hot Deformation Behaviour and Microstructural Evaluation of Zr-1Nb Alloy
High Strain Rate Compressive Behaviour of Selective Laser Melted Ti-6Al-4V
Structure and Properties of CuCr0.6 Alloy after Severe Plastic Deformation
Influence of Microalloying (Including Rare-Earth Metals) on the Phase Composition and Properties of Aluminum Alloys
Investigation of Impact Behavior of TIG Welded Inconel 718 at Aircraft Engine Operating Temperatures
Analysis of Residual Stress on FSW AA 6061 Using Hole-Drilling with ESPI for HFMI Treated Condition
Improving Mechanical Properties of Co-Cr-W Alloys by Powder Metallurgy
Effect of Zr-Addition to Ti-14Mn Alloy
Microstructural Investigation and Characterization of Bulk Brass Melted by Conventional and Microwave Processing Methods
Implementing Thermomechanical Properties of 22MnB5 Steel during Hot Single-Point Incremental Forming
Some Studies on the Bulging Characteristics of Cold-Upset Steel Preforms
Microstructure and Wear Properties of High-Pressure Torsion Processed Iron
Packing Efficiency Characterization of SiC Abrasive Machining Particles for Photovoltaic Silicon Wafer Slicing
Laser Melting of High Thermal Conductivity Steel (HTCS) Surface
Material Removal Model of Lap Grinding for Sapphire Substrate Based on Roughness Parameters
Chapter 8: Building Materials
Fabrication of Eco-Green Brick by Using of Vetiver Grass as Feldspar Replacement
Effect of Delaying Addition of Heat Stimulated Superplasticizer on Fresh Properties of Mortar
Investigation of Polyurethane Bonding to Steel in Sandwich Panels
Mechanical and Durability Properties of Concrete Using Dredged Marine Sand
Study of Sawdust and Expanded Polystyrene as Cavity Filler Material on the Effect of Thermal Conductivity in Perforated Clay Brick
Compressive Strength of Mortars Admixed with Wollastonite and Microsilica

Über Autor(innen)

Eds. Yunqiu He, Ramesh K. Agarwal and Jean-Jacques Delaunay