Selected, peer reviewed papers from the Sixth International Light Metals Technology Conference (LMT2013), July 24-26, 2013, Old Windsor, United Kingdom
Buch, Englisch, 860 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 400 g
ISBN: 978-3-03785-766-3
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Produktionstechnik Fertigungstechnik
- Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Metallurgie
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Metallische Werkstoffe
Weitere Infos & Material
Preface
Chapter 1: Alloy Development
Phase Diagram of Mg-Zn-Gd System Alloy at Mg Rich Corner and its Application in the Development of Two New Alloys
Castable Aluminium Alloys for High Temperature Applications
Energy Efficient Technology for Al–Cu–Mn–Zr Sheet Alloys
Compositional Effects on the Restoration Behaviour in Mg-Zn-RE Alloys
Effect of Ti Addition on Mechanical Properties of High Pressure Die Cast Al-Mg-Si Alloys
Microstructure, Mechanical and Corrosion Properties of Mg-Gd-Zn Alloys
Effect of Addition of Al & Ca and Heat Treatment on the Cast Mg-6Zn Alloy
Development and Property Evaluation of Low-Si Aluminum Casting Alloys for Thermal Dissipation
Influence of Iron on the Size and Distribution of Metallic Lanthanum Particles in Free-Machining Titanium Alloys Ti 6Al 7Nb xFe 0.9La
Recent Achievements and Future Challenges for R&D on Aluminium Alloys and Processing
Development of a High Strength Cast Aluminium Alloy for Possible Automotive Applications
Effects of Bismuth on the Microstructure and Mechanical Properties of AlSi9Cu3(Fe) Die Casting Alloys
Effect of Excess Mg on the Microstructure and Mechanical Properties of Al-Mg2Si High Pressure Die Casting Alloys
Creep Behaviour Under Compressive Stresses of Calcium and Barium Containing Mg-Al-based Die Casting Alloys
Chapter 2: Casting & Solidification
Improvement of the Interdependence Analytical Model through Selection of Interfacial Growth Rates during the Initial Transient
Effect of Combined Electromagnetic Fields on the Structure of a HDC Casting 2024 Al Alloy Ingot
Preliminary Design and Assessment of a Novel Electromagnetic Edge Dam for Aluminium Twin Roll Casting
A Model of Inclusion Behaviour in Liquid Aluminium
Refinement of the Microstructure of an Al-Mg2Si Hypereutectic Alloy by Intensive Melt Shearing
Exploring the Use of a Synchrotron X-Ray Scattering Method to Investigate Nucleation
Effect of Si Content on the Size of Fe-Rich Intermetallic Particles in Al-xSi-0.8Fe Alloys
Comparing the SEED Semi-Solid Process to Low Pressure Permanent Mould in the Production of 4mm Thick Aluminum A356 Covers
Effect of Ca Level on the Formation of Silicon Phases during Solidification of Hypereutectic Al-Si Alloys
A Brief History of the Grain Refinement of Cast Light Alloys
Study of the Effect of Cooling Rate on Eutectic Modification in A356 Aluminium Alloys
The Effect of Superheating and Cooling Rate on Primary Precipitation of Si in Hypereutectic Al-Si Alloys
Modification of a Hypereutectic Aluminium Silicon Alloy under the Influence of Intensive Melt Shearing
Grain Refiner Development for Al Containing Mg Alloys
Focused Ion Beam Milling and Imaging: An Advanced Method to Detect Fine Inclusions in Cast Aluminium Alloys
Simulation of Cold Shuts and Misruns in Centrifugal Casting of TiAl Low Pressure Turbine Blades
Modelling Eutectic Growth in Unmodified and Modified Near-Eutectic Al-Si Alloy
DC Casting of Large Sized Ingot of a High Strength 7xxx Alloy under the Influence of Electromagnetic Field
Melt Conditioned Twin Roll Casting (MC-TRC) of Thin Mg-Alloy Strips for Direct Stamping of Mg Components
Application Research on DC Casting Process by Annular Electromagnetic Stirring for a Modified 7075 Alloy
Comparison of Oxide Thickness of Aluminium and the Effects of Selected Alloying Additions
Microstructural Modeling of Mg Alloys and Experimental Validation
Ultrafast X-Ray Imaging and Modelling of Ultrasonic Cavitations in Liquid Metal
Melt Quenched High Pressure Die Casting (MQ-HPDC) of an A356 Alloy
Plasma Treatment Casting of Cast Aluminum 6XXX Wrought Alloys
Influence of Process Parameters on Twin Roll Cast Strip of the Alloy AZ31
A Synchrotron X-Ray Radiography Investigation of Induced Dendrite Fragmentation in Al-15wt%Cu
Relationship between Growth Rates and Dendritic Microstructure Parameters in Al-5wt. Zn Binary Alloy
Characterisation of Oxide Films in Al-Mg Alloy Melts
Modelling of the Effects of Entrainment Defects on Mechanical Properties in a Cast Al-Si-Mg Alloy
High Speed Imaging Study of the Dynamics of Ultrasonic Bubbles at a Liquid-Solid Interface
Effect of Travelling Magnetic Fields on the Dendritic Microstructure of AlSi and AlSiMn
Material Properties of Cast Aluminium Alloys Produced by Various Casting Processes
Study of Mechanical Properties of an LM24 Composite Alloy Reinforced with Cu-CNT Nanofillers, Processed Using Ultrasonic Cavitation
Catalytic Effect of Nanoparticles on Primary and Secondary Phase Nucleation
Practical Considerations on the Application of Ultrasonic Treatment to Mg-Al Shape Castings
A Study of the Behaviour of Double Oxide Films in Al Alloy Melts
Assessment of Quality when Delivering Molten Aluminium Alloys Instead of Ingots
Effect of Ultrasonic Melt Treatment on Degassing and Structure of Aluminium Alloys
Determination of the Magnitude of Interfacial Air-Gap and Heat Transfer during Ingot Casting into Permanent Metal Moulds by Numerical and Experimental Techniques
A Finite-Volume Model for Numerical Solidification of Mg Alloys
Study of the Solidification of AS Alloys Combining In Situ Synchrotron Diffraction and Differential Scanning Calorimetry
Solidification Mechanisms in Melt Conditioned Direct Chill (MC-DC) Cast AZ31 Billets
Microstructural and Mechanical Characterization of AM60B Alloy Cast by RSF Process
Production of High Purity Mg-X Rare Earth Binary Alloys Using Zr
Influences of Y Additions on the Hot Tearing Susceptibility of Mg-1.5wt.%Zn Alloys
Influence of a Novel Master Alloy Addition on the Grain Refinement of Al-Si Cast Alloys
Vacuum Induction Melting of TiNi Alloys Using BaZrO3 Crucibles
Effect of A-EMS Melt Treatment Process on Microstructure and Property of Squeeze Casting Al-Zn-Mg-Cu-Sc Alloys
The Response of Entrainment Defect Distribution to Varied Fluid Flow Parameters in the High Pressure Die Casting of Al Alloys
Design of a Composite Roll with Internal Cooling Channels for Twin-Roll Casting
Effect of Intensive Melt Shearing and Zr Content on Grain Refinement of Mg-0.5Ca-xZr Alloys
Chapter 3: Forming
FEA Modelling of Cutting Force and Chip Formation in Thermally Assisted Machining of Ti6Al4V Alloy
Characterizing the Asymmetric/Anisotropic Deformation Response and Forming Behaviour of Wrought Magnesium and Titanium Alloys
Manufacture of CNTs-Al Powder Precursors for Casting of CNTs-Al Matrix Composites
Evolution of Near-Surface Deformed Layers on AA3104 Aluminium Alloy
Influence of Groove Pressing Process on the Drawability (R Value) of Aluminium Alloy AA 5052 Sheets
Numerical Investigation on the Hot Forming and Cold-Die Quenching of an Aluminium-Magnesium Alloy into a Complex Component
A Review of Cooling Technologies for Flat Rolled Aluminium Products
Formation of Bulk Nanostructured Al3Ni from Elemental Micropowders Using High-Pressure Torsion
Processing of Elemental Titanium by Powder Metallurgy Techniques
Tailoring Microstructure and Mechanical Properties of 6063 Aluminium Alloy for Lightweight Structural Parts
Novel Forming of Ti-6Al-4V by Laser Engineered Net Shaping
Effect of Strain and Strain Rate on the Evolution of Dispersoid Particles in Al-Mn-Fe-Si Alloy during Hot Deformation
Microstructural and Mechanical Characterization of ARB AZ31
Strengthening of Al 6061 Alloy by High-Pressure Torsion through Grain Refinement and Aging
Processing of Ti Alloys by Additive Manufacturing: A Comparison of the Microstructures Obtained by Laser Cladding, Selective Laser Melting and Electron Beam Melting
Forming Behaviour of Al-TiC In Situ Composites
The Strength and Ductility of 5483 Aluminium Alloy Processed by Various SPD Methods
Integrated Modeling of Strength Evolution in Al-Mg-Si Alloys during Hot Deformation
Cryo-Rolling and Formability of 2024 Aluminium
Process Optimization and Microstructure Control for Twin Screw Rheo-Extrusion of an AZ91D Magnesium Alloy
The Effect of Particles on Microstructure and Mechanical Behaviour of Mg-10Gd-3Y-0.4Zr Alloy Processed by ECAP
Chapter 4: Heat Treatment & Phase Transformations
Constituent Particles and Dispersoids in an Al-Mn-Fe-Si Alloy Studied in Three-Dimensions by Serial Sectioning
Artificial Ageing Behaviour of Al-4Zr Micro Sheets
Study of Dynamic Precipitation during Hot Deformation of Mg-Al-Sn Alloys
Heat Treatment of Magnesium Alloys – Current Capabilities
Effect of Selected Alloying Elements on Aluminium Physical Properties and its Effect on Homogenization after Casting
Thermodynamics-Integrated Simulation of Precipitate Evolution in Al-Mg-Si-Alloys
Age Hardening of Mg-3Zn-xCa (X = 0, 0.5, 1.0) wt.% Alloys
Microstructure Evolution and Mechanical Properties of an Al-Si-Cu-Mg-Ni Aluminium Alloy after Thermal Exposure
Effect of Grain Size and Structure, Solid Solution Elements, Precipitates and Twinning on Nanohardness of Mg-RE Alloys
Effect of Heat Treatment on the Mechanical Properties of Wrought Al-Zn-Mg-Cu Alloy Cast by Rapid Solidification
Three Dimensional Imaging of Light Metals Using Serial Block Face Scanning Electron Microscopy (SBFSEM)
Effect of Heat Treatment and Thermal Exposure on Microstructure of the Alloy C+ Bars
Evolution of Microstructure and Mechanical Properties of the Thixo-Diecast 319s Alloy during Heat Treatment
Anisotropic Diffusion Behaviour of Al and Zn in HCP Mg: Diffusion Couple Experiment Using Mg Single Crystal
Microstructures and Mechanical Properties of a Novel Mg-Gd-Y-Zn-Zr Alloy
Chapter 5: Mechanical Behaviour
Recrystallization and Grain Growth Related Texture and Microstructure Evolution in Two Rolled Magnesium Rare-Earth Alloys
Investigation of Twinning Activity in Magnesium Using Advanced In Situ Methods
Acoustic Emission Study of Mg-Mn Extruded Alloys with Prospective Mechanical Properties
High Temperature Mechanical Properties of Sand-Cast Mg-Gd-Y Magnesium Alloy
The Effect of Aluminium on Deformation and Twinning in Alpha Titanium: The 45° Case
Wear Behaviour of A356 Aluminium Alloy Reinforced with Micron and Nano Size SiC Particles
High Strength and High Ductility in Nanostructured Aluminium-Based Intermetallics Produced by High-Pressure Torsion
Tension-Tension Fatigue Behaviour of Carbon Nanotube Reinforced Aluminium Composites
Compressive Creep Behaviour of Extruded Mg-10Gd-3Y-0.5Zr (wt.%) Alloy
Fatigue Crack Growth in Cast and Wrought Aluminium Alloys
Reducing Mechanical Asymmetry in Wrought Magnesium Alloys
Modelling Creep Induced by Machining Residual Stresses in Aluminium Alloys
Crashworthiness of Magnesium Sheet Structures
Chapter 6: Corrosion & Surface Modification
Extending the Life of Light Alloy Components: Microstructure, Corrosion, Inhibition and Performance Assessment
Development of Non Chromate Conversion Coatings on AZ31 Alloy: Effect of Nickel Overcoat
Influence of Microstructure on the Corrosion Resistance of AZ91D after EB Surface Alloying
Effect of Zn Content on the Microstructure and Corrosion Behaviour of Mg-7Y-0.6Zr Alloy
Comparison of Corrosion Resistance of High Pressure Die-Cast and Semi-Solid Cast AZ91, AM60, Alloys and Respective Anodic Oxides
Relating Grain Misorientation to the Corrosion Behaviour of Low Copper 7xxx Aluminium Alloys
Corrosion of an Advanced Al-Cu-Li Alloy for Aerospace Applications
Improving Corrosion Resistance of AA2014 Welds with Micro Arc Oxidation
Corrosion Resistance of Al-12Si Coatings on AZ91 Magnesium Alloy Prepared through Flame Spray
Electrochemical Corrosion Behaviour of WE54 Magnesium Alloy
Galvanic Corrosion between Magnesium Alloys and Steel
Consequences of Micro-Milled and Laser Structured Surfaces of CP-Titanium on Tension-Compression Fatigue Behaviour
Anodising of Al-Mg-Si-(Cu) Alloys Produced by R-HPDC
Influence of the Organic Additions on Structure, Corrosion Resistance and Tribological Properties of Ni/Al2O3 Composite Coatings
Effect of Yttrium Ion on YSZ-Al2O3 Composite Coating Formed by PEO on a Cast Al-Si-Cu-Ni Alloy
Improving Corrosion Resistance of Mg10Gd Alloy
Relationship between Laser Parameters - Microstructural Modification - Mechanical Properties of Laser Surface Melted Magnesium Alloy AZ91D
Microstructure and Microgalvanic Corrosion of an Extruded Mg-10Gd-2Y-0.5Zr Magnesium Alloy
Role of Electric Pulse Duty and Frequency on Properties of Micro-Arc Oxidized Titania Films Developed on Ti-6Al-4V
Novel Environmentally-Friendly Coatings for Aerospace Alloys
Surface Reactivity of Magnesium Alloys in Solid and Liquid States
Research on Microstructure and Tribological Properties of the Cp/AlSn Coatings Deposited by Magnetron Sputtering
Chapter 7: Joining
Comparative Study of Different Interfaces of Steel Inserts in Aluminium Castings
Enhanced Mechanical Properties of AA5083 GTA Weldments with Current Pulsing and Addition of Scandium
Automotive Structures: Design for Disassembly and the Role of Adhesive Bonding
The Effect of Friction Stir Process (FSP) on the Microstructure and Mechanical Properties of Mg-Gd-Ag-Zr Alloy
Formation of Intermetallic Compounds in Dissimilar Friction Spot Weld of Al to Mg Alloys
Enhanced Performance of Steel-Aluminium Cast Nodes through Cold Metal Transfer
Friction Stir Processing in Wrought and Cast Aluminum Alloys
Influence of Rivet Tip Geometry on the Joint Quality and Mechanical Strengths of Self-Piercing Riveted Aluminium Joints
Investigation of Fusion Weldments of Semi-Solid Aluminium A356 Alloy: Pool Geometry and Microstructure
Hot Cracking Susceptibility in the TIG Joint of AZ31 Mg-Alloy Plates Produced by the TRC Process with and without Intensive Melt Shearing
High Strength Aluminium Sheet Metal Joining by Resistance Spot Welding
Disbonding Technology for Adhesive Reversible Assembly in the Automotive Industry
Mechanical and Microstructural Characterization of Percussive Arc Welded Hyper-Pins for Titanium to Composite Metal Joining
Microstructure and Mechanical Properties of Refilled Friction Stir Spot Welding of Commercial Pure Aluminium
Chapter 8: Applications
Effect of Aging on Conductivity of Heat Resistant Overhead Line Conductors
Investigation of the Microstructure and Bio-Corrosion Behaviour of Mg-Zn and Mg-Zn-Ca Alloys
Tensile Strength of Al-Zr Overhead Line Conductors
Peeling of Aluminium Tubes as an Efficient Method for Energy Absorption in Vehicle Front Structures
In Vitro Evaluation of Degradation of Biodegradable Silane Based Coating on Mg-Zn-Ca Alloy in a Physiological Environment
Rheological Inactivity of AIMgSi Conductors (AAAC) in Trend of Negative Stress Gradients
Characterization of an Mg-2Zn-1Ca 1ß-TCP Composite Fabricated by High Shear Solidification and ECAE
Enhanced Battery Pack for Electric Vehicle: Noise Reduction and Increased Stiffness
Effect of Precipitation Hardening on the Structure and Properties of Al-Mg-Si Conductor Alloys in Different Technological Routes
Plasma Electrolytic Oxidation and Characterization of Spark Plasma Sintered Magnesium/Hydroxyapatite Composites
