Sonstiges, Englisch, Band Volume 765, 860 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
Sonstiges, Englisch, Band Volume 765, 860 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
ISBN: 978-3-03795-501-7
Verlag: Trans Tech Publications
The special collection focuses on recent advances in the science and technologies associated with aluminium, magnesium and titanium alloys. Topics span the full light metals field from the development of new alloys, through processing and material behaviour, to final application, and increasingly the issues of sustainability and end-of-life.
The papers are arranged in the following chapters:
1. Alloy Development;
2. Casting & Solidification;
3. Forming;
4. Heat Treatment & Phase Transformations;
5. Mechanical Behaviour,
6. Corrosion & Surface Modification;
7. Joining; and
8. Applications.
This volume provides a snapshot of the current status and trends in light metals research, and will be an invaluable resource for readers in academia and industry alike.
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Metallurgie
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Produktionstechnik Fertigungstechnik
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Metallische Werkstoffe
Weitere Infos & Material
Phase Diagram of Mg-Zn-Gd System Alloy at Mg Rich Corner and its Application in the Development of Two New AlloysCastable Aluminium Alloys for High Temperature ApplicationsEnergy Efficient Technology for Al?Cu?Mn?Zr Sheet AlloysCompositional Effects on the Restoration Behaviour in Mg-Zn-RE AlloysEffect of Ti Addition on Mechanical Properties of High Pressure Die Cast Al-Mg-Si AlloysMicrostructure, Mechanical and Corrosion Properties of Mg-Gd-Zn AlloysEffect of Addition of Al & Ca and Heat Treatment on the Cast Mg-6Zn AlloyDevelopment and Property Evaluation of Low-Si Aluminum Casting Alloys for Thermal DissipationInfluence of Iron on the Size and Distribution of Metallic Lanthanum Particles in Free-Machining Titanium Alloys Ti 6Al 7Nb xFe 0.9LaRecent Achievements and Future Challenges for R&D on Aluminium Alloys and ProcessingDevelopment of a High Strength Cast Aluminium Alloy for Possible Automotive ApplicationsEffects of Bismuth on the Microstructure and Mechanical Properties of AlSi9Cu3(Fe) Die Casting AlloysEffect of Excess Mg on the Microstructure and Mechanical Properties of Al-Mg2Si High Pressure Die Casting AlloysCreep Behaviour Under Compressive Stresses of Calcium and Barium Containing Mg-Al-based Die Casting AlloysImprovement of the Interdependence Analytical Model through Selection of Interfacial Growth Rates during the Initial TransientEffect of Combined Electromagnetic Fields on the Structure of a HDC Casting 2024 Al Alloy IngotPreliminary Design and Assessment of a Novel Electromagnetic Edge Dam for Aluminium Twin Roll CastingA Model of Inclusion Behaviour in Liquid AluminiumRefinement of the Microstructure of an Al-Mg2Si Hypereutectic Alloy by Intensive Melt ShearingExploring the Use of a Synchrotron X-Ray Scattering Method to Investigate NucleationEffect of Si Content on the Size of Fe-Rich Intermetallic Particles in Al-xSi-0.8Fe AlloysComparing the SEED Semi-Solid Process to Low Pressure Permanent Mould in the Production of 4mm Thick Aluminum A356 CoversEffect of Ca Level on the Formation of Silicon Phases during Solidification of Hypereutectic Al-Si AlloysA Brief History of the Grain Refinement of Cast Light AlloysStudy of the Effect of Cooling Rate on Eutectic Modification in A356 Aluminium AlloysThe Effect of Superheating and Cooling Rate on Primary Precipitation of Si in Hypereutectic Al-Si AlloysModification of a Hypereutectic Aluminium Silicon Alloy under the Influence of Intensive Melt ShearingGrain Refiner Development for Al Containing Mg AlloysFocused Ion Beam Milling and Imaging: An Advanced Method to Detect Fine Inclusions in Cast Aluminium AlloysSimulation of Cold Shuts and Misruns in Centrifugal Casting of TiAl Low Pressure Turbine BladesModelling Eutectic Growth in Unmodified and Modified Near-Eutectic Al-Si AlloyDC Casting of Large Sized Ingot of a High Strength 7xxx Alloy under the Influence of Electromagnetic FieldMelt Conditioned Twin Roll Casting (MC-TRC) of Thin Mg-Alloy Strips for Direct Stamping of Mg ComponentsApplication Research on DC Casting Process by Annular Electromagnetic Stirring for a Modified 7075 AlloyComparison of Oxide Thickness of Aluminium and the Effects of Selected Alloying AdditionsMicrostructural Modeling of Mg Alloys and Experimental ValidationUltrafast X-Ray Imaging and Modelling of Ultrasonic Cavitations in Liquid MetalMelt Quenched High Pressure Die Casting (MQ-HPDC) of an A356 AlloyPlasma Treatment Casting of Cast Aluminum 6XXX Wrought AlloysInfluence of Process Parameters on Twin Roll Cast Strip of the Alloy AZ31A Synchrotron X-Ray Radiography Investigation of Induced Dendrite Fragmentation in Al-15wt%CuRelationship between Growth Rates and Dendritic Microstructure Parameters in Al-5wt. Zn Binary AlloyCharacterisation of Oxide Films in Al-Mg Alloy MeltsModelling of the Effects of Entrainment Defects on Mechanical Properties in a Cast Al-Si-Mg AlloyHigh Speed Imaging Study of the Dynamics of Ultrasonic Bubbles at a Liquid-Solid InterfaceEffect of Travelling Magnetic Fields on the Dendritic Microstructure of AlSi and AlSiMnMaterial Properties of Cast Aluminium Alloys Produced by Various Casting ProcessesStudy of Mechanical Properties of an LM24 Composite Alloy Reinforced with Cu-CNT Nanofillers, Processed Using Ultrasonic CavitationCatalytic Effect of Nanoparticles on Primary and Secondary Phase NucleationPractical Considerations on the Application of Ultrasonic Treatment to Mg-Al Shape CastingsA Study of the Behaviour of Double Oxide Films in Al Alloy MeltsAssessment of Quality when Delivering Molten Aluminium Alloys Instead of IngotsEffect of Ultrasonic Melt Treatment on Degassing and Structure of Aluminium AlloysDetermination of the Magnitude of Interfacial Air-Gap and Heat Transfer during Ingot Casting into Permanent Metal Moulds by Numerical and Experimental TechniquesA Finite-Volume Model for Numerical Solidification of Mg AlloysStudy of the Solidification of AS Alloys Combining In Situ Synchrotron Diffraction and Differential Scanning CalorimetrySolidification Mechanisms in Melt Conditioned Direct Chill (MC-DC) Cast AZ31 BilletsMicrostructural and Mechanical Characterization of AM60B Alloy Cast by RSF ProcessProduction of High Purity Mg-X Rare Earth Binary Alloys Using ZrInfluences of Y Additions on the Hot Tearing Susceptibility of Mg-1.5wt.%Zn AlloysInfluence of a Novel Master Alloy Addition on the Grain Refinement of Al-Si Cast AlloysVacuum Induction Melting of TiNi Alloys Using BaZrO3 CruciblesEffect of A-EMS Melt Treatment Process on Microstructure and Property of Squeeze Casting Al-Zn-Mg-Cu-Sc AlloysThe Response of Entrainment Defect Distribution to Varied Fluid Flow Parameters in the High Pressure Die Casting of Al AlloysDesign of a Composite Roll with Internal Cooling Channels for Twin-Roll CastingEffect of Intensive Melt Shearing and Zr Content on Grain Refinement of Mg-0.5Ca-xZr AlloysFEA Modelling of Cutting Force and Chip Formation in Thermally Assisted Machining of Ti6Al4V AlloyCharacterizing the Asymmetric/Anisotropic Deformation Response and Forming Behaviour of Wrought Magnesium and Titanium AlloysManufacture of CNTs-Al Powder Precursors for Casting of CNTs-Al Matrix CompositesEvolution of Near-Surface Deformed Layers on AA3104 Aluminium AlloyInfluence of Groove Pressing Process on the Drawability (R Value) of Aluminium Alloy AA 5052 SheetsNumerical Investigation on the Hot Forming and Cold-Die Quenching of an Aluminium-Magnesium Alloy into a Complex ComponentA Review of Cooling Technologies for Flat Rolled Aluminium ProductsFormation of Bulk Nanostructured Al3Ni from Elemental Micropowders Using High-Pressure TorsionProcessing of Elemental Titanium by Powder Metallurgy TechniquesTailoring Microstructure and Mechanical Properties of 6063 Aluminium Alloy for Lightweight Structural PartsNovel Forming of Ti-6Al-4V by Laser Engineered Net ShapingEffect of Strain and Strain Rate on the Evolution of Dispersoid Particles in Al-Mn-Fe-Si Alloy during Hot DeformationMicrostructural and Mechanical Characterization of ARB AZ31Strengthening of Al 6061 Alloy by High-Pressure Torsion through Grain Refinement and AgingProcessing of Ti Alloys by Additive Manufacturing: A Comparison of the Microstructures Obtained by Laser Cladding, Selective Laser Melting and Electron Beam MeltingForming Behaviour of Al-TiC In Situ CompositesThe Strength and Ductility of 5483 Aluminium Alloy Processed by Various SPD MethodsIntegrated Modeling of Strength Evolution in Al-Mg-Si Alloys during Hot DeformationCryo-Rolling and Formability of 2024 AluminiumProcess Optimization and Microstructure Control for Twin Screw Rheo-Extrusion of an AZ91D Magnesium AlloyThe Effect of Particles on Microstructure and Mechanical Behaviour of Mg-10Gd-3Y-0.4Zr Alloy Processed by ECAPConstituent Particles and Dispersoids in an Al-Mn-Fe-Si Alloy Studied in Three-Dimensions by Serial SectioningArtificial Ageing Behaviour of Al-4Zr Micro SheetsStudy of Dynamic Precipitation during Hot Deformation of Mg-Al-Sn AlloysHeat Treatment of Magnesium Alloys ? Current CapabilitiesEffect of Selected Alloying Elements on Aluminium Physical Properties and its Effect on Homogenization after CastingThermodynamics-Integrated Simulation of Precipitate Evolution in Al-Mg-Si-AlloysAge Hardening of Mg-3Zn-xCa (X = 0, 0.5, 1.0) wt.% AlloysMicrostructure Evolution and Mechanical Properties of an Al-Si-Cu-Mg-Ni Aluminium Alloy after Thermal ExposureEffect of Grain Size and Structure, Solid Solution Elements, Precipitates and Twinning on Nanohardness of Mg-RE AlloysEffect of Heat Treatment on the Mechanical Properties of Wrought Al-Zn-Mg-Cu Alloy Cast by Rapid SolidificationThree Dimensional Imaging of Light Metals Using Serial Block Face Scanning Electron Microscopy (SBFSEM)Effect of Heat Treatment and Thermal Exposure on Microstructure of the Alloy C+ BarsEvolution of Microstructure and Mechanical Properties of the Thixo-Diecast 319s Alloy during Heat TreatmentAnisotropic Diffusion Behaviour of Al and Zn in HCP Mg: Diffusion Couple Experiment Using Mg Single CrystalMicrostructures and Mechanical Properties of a Novel Mg-Gd-Y-Zn-Zr AlloyRecrystallization and Grain Growth Related Texture and Microstructure Evolution in Two Rolled Magnesium Rare-Earth AlloysInvestigation of Twinning Activity in Magnesium Using Advanced In Situ MethodsAcoustic Emission Study of Mg-Mn Extruded Alloys with Prospective Mechanical PropertiesHigh Temperature Mechanical Properties of Sand-Cast Mg-Gd-Y Magnesium AlloyThe Effect of Aluminium on Deformation and Twinning in Alpha Titanium: The 45? CaseWear Behaviour of A356 Aluminium Alloy Reinforced with Micron and Nano Size SiC ParticlesHigh Strength and High Ductility in Nanostructured Aluminium-Based Intermetallics Produced by High-Pressure TorsionTension-Tension Fatigue Behaviour of Carbon Nanotube Reinforced Aluminium CompositesCompressive Creep Behaviour of Extruded Mg-10Gd-3Y-0.5Zr (wt.%) AlloyFatigue Crack Growth in Cast and Wrought Aluminium AlloysReducing Mechanical Asymmetry in Wrought Magnesium AlloysModelling Creep Induced by Machining Residual Stresses in Aluminium AlloysCrashworthiness of Magnesium Sheet StructuresExtending the Life of Light Alloy Components: Microstructure, Corrosion, Inhibition and Performance AssessmentDevelopment of Non Chromate Conversion Coatings on AZ31 Alloy: Effect of Nickel OvercoatInfluence of Microstructure on the Corrosion Resistance of AZ91D after EB Surface AlloyingEffect of Zn Content on the Microstructure and Corrosion Behaviour of Mg-7Y-0.6Zr AlloyComparison of Corrosion Resistance of High Pressure Die-Cast and Semi-Solid Cast AZ91, AM60, Alloys and Respective Anodic OxidesRelating Grain Misorientation to the Corrosion Behaviour of Low Copper 7xxx Aluminium AlloysCorrosion of an Advanced Al-Cu-Li Alloy for Aerospace ApplicationsImproving Corrosion Resistance of AA2014 Welds with Micro Arc OxidationCorrosion Resistance of Al-12Si Coatings on AZ91 Magnesium Alloy Prepared through Flame SprayElectrochemical Corrosion Behaviour of WE54 Magnesium AlloyGalvanic Corrosion between Magnesium Alloys and SteelConsequences of Micro-Milled and Laser Structured Surfaces of CP-Titanium on Tension-Compression Fatigue BehaviourAnodising of Al-Mg-Si-(Cu) Alloys Produced by R-HPDCInfluence of the Organic Additions on Structure, Corrosion Resistance and Tribological Properties of Ni/Al2O3 Composite CoatingsEffect of Yttrium Ion on YSZ-Al2O3 Composite Coating Formed by PEO on a Cast Al-Si-Cu-Ni AlloyImproving Corrosion Resistance of Mg10Gd AlloyRelationship between Laser Parameters - Microstructural Modification - Mechanical Properties of Laser Surface Melted Magnesium Alloy AZ91DMicrostructure and Microgalvanic Corrosion of an Extruded Mg-10Gd-2Y-0.5Zr Magnesium AlloyRole of Electric Pulse Duty and Frequency on Properties of Micro-Arc Oxidized Titania Films Developed on Ti-6Al-4VNovel Environmentally-Friendly Coatings for Aerospace AlloysSurface Reactivity of Magnesium Alloys in Solid and Liquid StatesResearch on Microstructure and Tribological Properties of the Cp/AlSn Coatings Deposited by Magnetron SputteringComparative Study of Different Interfaces of Steel Inserts in Aluminium CastingsEnhanced Mechanical Properties of AA5083 GTA Weldments with Current Pulsing and Addition of ScandiumAutomotive Structures: Design for Disassembly and the Role of Adhesive BondingThe Effect of Friction Stir Process (FSP) on the Microstructure and Mechanical Properties of Mg-Gd-Ag-Zr AlloyFormation of Intermetallic Compounds in Dissimilar Friction Spot Weld of Al to Mg AlloysEnhanced Performance of Steel-Aluminium Cast Nodes through Cold Metal TransferFriction Stir Processing in Wrought and Cast Aluminum AlloysInfluence of Rivet Tip Geometry on the Joint Quality and Mechanical Strengths of Self-Piercing Riveted Aluminium JointsInvestigation of Fusion Weldments of Semi-Solid Aluminium A356 Alloy: Pool Geometry and MicrostructureHot Cracking Susceptibility in the TIG Joint of AZ31 Mg-Alloy Plates Produced by the TRC Process with and without Intensive Melt ShearingHigh Strength Aluminium Sheet Metal Joining by Resistance Spot WeldingDisbonding Technology for Adhesive Reversible Assembly in the Automotive IndustryMechanical and Microstructural Characterization of Percussive Arc Welded Hyper-Pins for Titanium to Composite Metal JoiningMicrostructure and Mechanical Properties of Refilled Friction Stir Spot Welding of Commercial Pure AluminiumEffect of Aging on Conductivity of Heat Resistant Overhead Line ConductorsInvestigation of the Microstructure and Bio-Corrosion Behaviour of Mg-Zn and Mg-Zn-Ca AlloysTensile Strength of Al-Zr Overhead Line ConductorsPeeling of Aluminium Tubes as an Efficient Method for Energy Absorption in Vehicle Front Structures
In Vitro Evaluation of Degradation of Biodegradable Silane Based Coating on Mg-Zn-Ca Alloy in a Physiological EnvironmentRheological Inactivity of AIMgSi Conductors (AAAC) in Trend of Negative Stress GradientsCharacterization of an Mg-2Zn-1Ca 1?-TCP Composite Fabricated by High Shear Solidification and ECAEEnhanced Battery Pack for Electric Vehicle: Noise Reduction and Increased StiffnessEffect of Precipitation Hardening on the Structure and Properties of Al-Mg-Si Conductor Alloys in Different Technological RoutesPlasma Electrolytic Oxidation and Characterization of Spark Plasma Sintered Magnesium/Hydroxyapatite Composites