Sonstiges, Englisch, Band Volumes 745-746, 876 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
Sonstiges, Englisch, Band Volumes 745-746, 876 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
ISBN: 978-3-03795-390-7
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preparation of Small-Diameter Silk Fibroin Tubular Scaffolds with Electrospinning Method
In Vitro Antibacterial Properties of Vancomycin-Loaded Nano-Hydroxyapatite/Collagen/Calcium Sulfate Hemihydrates (VCM/nHAC/CSH) Bone SubstitutePerformance of Composite Cements in the Repair of Porcine Thoracolumbar Burst Fracture In VitroEffects of Interaction of (NaPO3)6 and NaH2PO4 on Ca/P of MAO Bio-Ceramic Coating of ZK60 Mg AlloyEffect of Hot Extrusion and Cyclic Extrusion Compression Progress on the Microstructures and Properties of Mg-Zn-Y-Nd AlloyMicrostructures and Properties of Biological Mg-Zn-Y-Nd Alloy by Friction Stir ProcessingAdsorption for Au3+ by Persimmon Tannins Immobilized on Collagen FiberImprovement of the Hydrophilicity of Cu/LDPE Composite and its Influence on the Release of Cupric IonsPreparation of Poly (MMA-S-DVB) Microspheres by Suspension Polymerization MethodStudy on the Preparation of Silver Nanoparticles Coated with Diamond-Like Carbon Film and their PropertiesOrthogonal Preparation and Microscopic Analysis of Porous Ceramic Foamed by AerogenSynthesis of Silver Particles by Replacement ReactionThe Effect of High Gravity Field on the Hydrothermal Preparation of the Nanostructured MaterialsFabrication of Platinum Nanoparticles through Ionic Liquid Method and its Catalytic Properties in Hydrogenation ReactionFabrication of VO2 Film in the Spin-Coating WayEffects of Ho-Doping on Crystal Structure and Microstructure of La0.7Sr0.3MnO3 CeramicsPreparation and Magnetic Properties of BiFeO3 and NiCuZn Ferrite Multiferroic CompositesSynthesis, Microstructure, and Dielectric Properties of Mn-Doped 0.33BaTiO3-0.67BiFeO3 Multiferroic Solid SolutionsBiFeO3 Nanoparticles Prepared by NaNO3-Assisted Low-Heating Temperature Solid State Reaction MethodStudy on the Rolling Process of 1J22 Soft Magnetic AlloySintering Time Influences on Microstructure and Electrical Properties of Scandium Doped Zinc Oxide Varistor CeramicsThe Influence of Bi Content on the Properties of Bismuth Ferrite Thin Films Fabricated by Magnetron SputteringStructure Characterisation and Optical Properties of Eu3+-Doped LaAlO3 Ferroelectric and Magnetic Properties of Co Doping Bi6Fe2Ti3O18 CeramicsMicro-Displacement Positioning of Giant Magnetostrictive ActuatorA Device for Measuring High-TC Superconductor Transition Temperature with Electric Transport and AC Susceptibility Methods Based on Small Cryocooler CoolingProgress on Internal-Tin Route Nb3Sn Superconducting Strand for ITER in ChinaAnnealing Effects on the Microstructure and Mechanical Properties of Cu-Nb MicrocompositesPreparation of Multi-Core Bi-2212/Ag WiresMechanical and Superconducting Properties of NbTi Reinforced MgB2 WiresA Hybrid High-TcSuperconducting Magnetic Levitation Sculpture ModelMagnetization Method Design of Bulk Multi-Seeded High Temperature SuperconductorsAC Losses of YBCO Coated Conductor with Ferromagnetic Substrate in DC FieldAnalysis of the Permanent Magnet Guideway of High Temperature Superconducting MaglevHigh Quality MgB2/Nb Deposited by HPCVD MethodDegradation of Porosity and Enhanced Critical Current Density in MgB2 with a Toluene-Treatment Boron PowderEffect of Various C Sources Co-Doping on Transport Critical Current Density and Grains-Connectivity of MgB2/Fe TapesInfluence of Repeated Tensile Stress on Determining the Critical Tensile Stress/Strain of Copper Reinforced Bi-2223/Ag TapesA Review of the Ion Beam Assisted Deposition Researches towards Industrialization for the Second Generation High Temperature Superconducting Wire FabricationNumerical Analysis of Levitation Forces Dynamic Behavior in the HTS-Magnet Levitation SystemEffect of Sintering Conditions on the Phase Formation and Microstructure of Bi-2223/Ag/Ni Composite-Sheathed TapesEffect of Firing Temperature on Microstructure and Superconductivity of YBCO Films Derived from Low-Fluorine SolutionPreparing Ultrathin MgB2 Thin Film by Ex Situ Annealing of Mg-B Precursor FilmInfluence of Electron-Beam Annealing Duration on MgB2 Film SuperconductivityPreparation of EuBCO Epitaxial and Textured Films by F-Free Polymer-Assisted Chemical Solution Deposition MethodMOD-Derived YBa2Cu3O7-d Thin Films using a Fast Pyrolysis ProcessTemplate-Directed Electrodeposition of SnO2 Nanotubes and 1D Zn/SnO2 Core-Shell NanostructuresThe Influence of High-Energy Ball Milling and Sintering Process on the Microstructure and Mechanical Properties of Al-Ni-Y-Co-La AlloyMicrostructure and Mechanical Properties of a Multi-Modal Al Alloy with High StrengthPreparation and Characterization of HGM-Ni0.5Co0.5Fe2O4 Core-Shell Particles by Homogeneous CoprecipitationEffect of Severe Plastic Deformation at Ambient Temperature on Microstructures and Mechanical Properties of Aluminum Alloy 2519Microstructural Characterization of an Al-Mg-Si Aluminum Alloy Processed by Equal Channel Angular PressingHydrothermal Synthesis and Morphology Evolution of Perovskite PbTiO3 Crystals with Different Lead SourcesAtomistic Simulation Study on the Tensile Deformation Behaviour of Nanocrystalline NiA Strengthening Model of Cu-Cr In Situ Fibrous Composites Produced by Equal Channel Angular PressingSynthesis of Nano-WC by High-Energy Ball MillingMicrostructural Evolution of Fe-Based Metallic Glass/2024-Al Powder during High Energy Ball Milling ProcessStudy on the Preparation and Properties of Epoxy/PEI/Nano-Attapulgite NanocompositesIndentation Stress Relaxation Behavior in As-Deposited and Rolling Nanocrystalline NiFeInfluence of Annealing on Magnetic Performance for 1K107 Amorphous-Nanocrystalline Soft Magnetic AlloyEffect of Annealing on Mechanical Properties of Copper Alloys Deformed at Cryogenic TemperatureSynthesis of Carbon Nanospheres with Small Diameterby Microwave Pyrolysis of Methane DirectlyInterfacial Assembly of Two Gemini-Type Schiff Base Amphiphiles with Aromatic Spacers in Organized Molecular FilmsHydrothermal Synthesis and Photoluminescence of Pre-Perovskite Lead Titanate NanofibersHigh-Cycle Fatigue Behavior of Pure Iron with Gradient Structures LayerEffect of Poly Sodium-p-Styrenesulfonate on the Phase Formation and Morphology of the Hydrothermally Synthesized Bismuth Ferrite PowdersFormation of Nanocale Oxide Particles and Evaluation of Threshold Stress of Fe-9Cr-0.2Ti-0.3Y2O3 Nanostructured Ferritic AlloyEffect of Different Factors on Falling Process of Melt Electrospinning JetMicrostructural Characterizations of Maraging Steel Processed by Equal-Channel Angular PressingInstability and Pattern Formation of Thin Liquid Films Sandwiched between Soft Elastomer LayersDesign of Quasi-Planar Ridge SOI Waveguide Resonator for Integrated Optical GyroAdvances in Numerical and Experimental Study of Dielectrophoretic Assembly of Carbon NanotubesMechanical Properties of Poly(3-hydrobutyrate-co-hydroxyvalerate)/ Biodegradable Hyperbranched Poly(ester amide) BlendsSynthesis and Characteristics of Dental Composites with Novel Bis-GMA Derivate as a Resin BaseRecent Progress on Research of Contact Resistance of Carbon NanotubesSurfactant-Induced Nanofibrous Architecture of Silk Fibroin HydrogelsHierarchical Porous TiO2 Fibre Synthesized by Cotton Template and its Photocatalytic PerformanceEffect of Filler Ratio on Properties of Nanohydroxyapatite/SiO2 Based Bioactive Dental Resin CompositesEffects of Annealing on the Crystallization and Morphology of Electrospun Poly(L-lactic acid) FibersFabrication and Characterization of CuInS2Sensitized TiO2 Electrodes Based on Improved SILAR ProcessPreparation and Application of Nano Ce-Zr Mixed Oxides Supported H3PW12O40 in Nitrogen Oxide Capture and DecompositionBiotemplate Synthesis of Porous Ceria Fiber and Study on its Catalytic PerformancePreparation and Properties of Nanocomposite Hydrogel by Photoinitiated PolymerizationInfluence of Titanium Sol on the Sintering Behaviour, Microstructure and Properties of Al2O3-SiO2 Ceramic CoresStudy on the Sintering Mechanism of Tin Oxide Ceramics Doping with Pr2O3Properties of h-Bn/Si3N4 Composite Ceramics Fabricated by Gel-CastingEffects of SiO2 and ZrO2 Additives on Microstructure and Properties of Al2O3 CeramicThe Process Condition Research of SrAl2O4:Eu2+,Dy3+ Luminous Powder by Microwave MethodPreparation of Graphene Nanosheet/Alumina CompositesPreparation of Stable Pt Nanoparticles Supported by Mesoporous Silica SBA-15Preparation of ZrSiO4/C Inclusion Pigments by Nonhydrolytic Sol-Gel Methed Combined with the Process of Carbon Black ModificationPreparation of TiB2/TiN Nanocomposites by SPInfluences of Excess PbO on Optical Properties and Microstructures of La Modified 0.75Pb (Mg1/3Nb2/3)O3-0.25PbTiO3 Electro-Optic Transparent CeramicsMechanical Properties of NanoSiC Reinforced ZrB2-Based Ceramic CompositeMechanical Evaluation of the Porous Ceramics Prepared by Filtration with a Framework Structure of the Polycrystalline FibersTensile Strength and Bonding Mechanism of the Mullite Eramic/Ceramic Sample Joined by Phosphate AdhesiveStudy on the SiC-Al Co-Continuous Phase CompositesStudy on the In Situ Growth of Carbon Nanotubes for the Reinforcement of Cf/SiC Composite Fabricated by CVI+PIP ProcessMechanism of Self-Propagating High-Temperature Synthesis of MoSi2Application of Alumina-Magnesia Precast Blocks for LF Refining LadlePreparation and Electrical Properties of Mn-Co-Ni-O Thin-Film for NTC Thermistors ApplicationSintering Performance of MgAl2O4 Spinel with Various Al2O3 ContentEffects of Al2O3 Species and Particle Sizes on Properties of Al2O3-Cr2O3 RefractoriesComparison of the Luminescence Properties of PbS Quantum Dots Prepared by Different MethodsJoining of High Strength Graphite with Silicon Resin and SiO2 AdditionEnhanced Humidity Stability of (Li,K,Na)NbO3-Based Lead-Free Piezoelectric Ceramics by Adding B2O3Influence of Spinel on the Fracture Energy of Refractory CastableCatalytic Properties of ZrB2-Based Ultra-High Temperature Ceramics Based on the Wall Temperature Response MethodEffect of Sheet Nanocarbon on Properties of Low Carbon Al2O3-C RefractoriesFabrication of Silicon Carbide Reticulated Porous Ceramics through Organic Foam Infiltration ProcessMechanical Properties of AlMgB14-xTiB2 Prepared by Field Activated and Pressure Assisted SynthesisMicrostructure of Short Carbon Fiber/Si3N4-Reinforced BAS Glass-Ceramic Matrix Composites
In Situ Synthesis of SiC and ?-Si3Al3O3N5 Whiskers in Alumina Carbon Based MaterialsPorous TiN Ceramics Fabricated by Carbothermal Reduction MethodSynthesis of Aluminum Titanate Powder at Low Temperature via Nonhydrolytic Sol-Gel Method by Using Aluminum PowderEnergy-Storage Study in Lead-Free Anti-Ferroelectric Bi0.5Na0.5TiO3-BaTiO3-K0.5Na0.5NbO3 CeramicsAntimony-Doped SnO2 Nanoparticles with Controlled Doping Level via Nonaqueous Sol-Gel ProcedureEffect of Gelation Process on Preparation of Aluminum Titanate Ultrafine Powder by Hydrolytic Sol-Gel MethodFabrication of a SiC-Ti Functionally Graded Bonding Interlayer by Precursor MethodFabrication and Mechanical Properties of SiC/Cu Composites with Zn Addition by Hot Pressing SinteringEvolution of Microstructures and Properties of the AlxCrCuFeNi2 High-Entropy AlloysEffect of Ni on Microstructure and Mechanical Properties of Bulk Nanocrystalline Fe-Al Based Alloys Prepared by Aluminothermic ReactionFabrication Technique of Wide Nb42Ni40Co18 Amorphous Alloy Ribbons with High Melting TemperatureMicrostructure and Electrochemical Performances of AlxFeCoNiCr(B) High Entropy AlloysEffect of Fe on Crystallization Process of Zr-Co-Al-(Fe) Bulk Metallic GlassesPreparation of Fe76Si9B10P5 Nanocrystalline Magnetic Cores by Direct-Nanocrystallizing Method during Spark-Plasma SinteringFabrication of Zr55Al10Ni5Cu30 Amorphous Composite Coating on Plain Carbon Steel by Laser Cladding and RemeltingBio-Properties of Zr-Based BMGMC as Potential Hard Tissue ImplantsSoft Magnetic Properties of the Fe76Si9B10P5/Zn0.5Ni0.5Fe2O4/PVA Composite FilmTailoring Microstructures and Mechanical Properties of AlCoCrFeNiTi0.3 High-Entropy Alloys by Heat TreatmentMicrostructure and Properties of Multi-Component AlxCoCrFeNiTi0.5 High-Entropy AlloysInvestigation of Viscosity Measurements of Molten Cu-Zr-Al AlloysDiffusion Bonding of Fe-Based Amorphous Ribbon to Crystalline CuCu-Zr-Nb Crystalline-Amorphous Composites Investigated by Thermodynamic Calculation and Ion Beam Mixing ExperimentsCritical Cooling Rate for the Glass Formation of Fe80-XCoxP13C7 AlloyDeformation Micromechanisms of a Ti-Based Metallic Glass Composite with Excellent Mechanical PropertiesEffect of Nb Addition on the Glass-Forming Ability, Soft-Magnetic Properties and Mechanical Properties of CoFeNiBSiNb Bulk Glassy Alloys
