Selected, peer reviewed papers from the Chinese Materials Congress 2012 (CMC 2012), July 13-18, 2012, Taiyuan, China
Buch, Englisch, 876 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1650 g
ISBN: 978-3-03785-607-9
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Organizers
Bio-Materials
Preparation of Small-Diameter Silk Fibroin Tubular Scaffolds with Electrospinning Method
In Vitro Antibacterial Properties of Vancomycin-Loaded Nano-Hydroxyapatite/Collagen/Calcium Sulfate Hemihydrates (VCM/nHAC/CSH) Bone Substitute
Performance of Composite Cements in the Repair of Porcine Thoracolumbar Burst Fracture In Vitro
Effects of Interaction of (NaPO3)6 and NaH2PO4 on Ca/P of MAO Bio-Ceramic Coating of ZK60 Mg Alloy
Effect of Hot Extrusion and Cyclic Extrusion Compression Progress on the Microstructures and Properties of Mg-Zn-Y-Nd Alloy
Microstructures and Properties of Biological Mg-Zn-Y-Nd Alloy by Friction Stir Processing
Adsorption for Au3+ by Persimmon Tannins Immobilized on Collagen Fiber
Improvement of the Hydrophilicity of Cu/LDPE Composite and its Influence on the Release of Cupric Ions
Preparation of Poly (MMA-S-DVB) Microspheres by Suspension Polymerization Method
Study on the Preparation of Silver Nanoparticles Coated with Diamond-Like Carbon Film and their Properties
Orthogonal Preparation and Microscopic Analysis of Porous Ceramic Foamed by Aerogen
Functional Crystal Materials
Synthesis of Silver Particles by Replacement Reaction
The Effect of High Gravity Field on the Hydrothermal Preparation of the Nanostructured Materials
Fabrication of Platinum Nanoparticles through Ionic Liquid Method and its Catalytic Properties in Hydrogenation Reaction
Fabrication of VO2 Film in the Spin-Coating Way
Effects of Ho-Doping on Crystal Structure and Microstructure of La0.7Sr0.3MnO3 Ceramics
Multiferroics Materials
Preparation and Magnetic Properties of BiFeO3 and NiCuZn Ferrite Multiferroic Composites
Synthesis, Microstructure, and Dielectric Properties of Mn-Doped 0.33BaTiO3-0.67BiFeO3 Multiferroic Solid Solutions
BiFeO3 Nanoparticles Prepared by NaNO3-Assisted Low-Heating Temperature Solid State Reaction Method
Study on the Rolling Process of 1J22 Soft Magnetic Alloy
Sintering Time Influences on Microstructure and Electrical Properties of Scandium Doped Zinc Oxide Varistor Ceramics
The Influence of Bi Content on the Properties of Bismuth Ferrite Thin Films Fabricated by Magnetron Sputtering
Structure Characterisation and Optical Properties of Eu3+-Doped LaAlO3
Ferroelectric and Magnetic Properties of Co Doping Bi6Fe2Ti3O18 Ceramics
Micro-Displacement Positioning of Giant Magnetostrictive Actuator
Supercomputer Materials and Application
A Device for Measuring High-TC Superconductor Transition Temperature with Electric Transport and AC Susceptibility Methods Based on Small Cryocooler Cooling
Progress on Internal-Tin Route Nb3Sn Superconducting Strand for ITER in China
Annealing Effects on the Microstructure and Mechanical Properties of Cu-Nb Microcomposites
Preparation of Multi-Core Bi-2212/Ag Wires
Mechanical and Superconducting Properties of NbTi Reinforced MgB2 Wires
A Hybrid High-TcSuperconducting Magnetic Levitation Sculpture Model
Magnetization Method Design of Bulk Multi-Seeded High Temperature Superconductors
AC Losses of YBCO Coated Conductor with Ferromagnetic Substrate in DC Field
Analysis of the Permanent Magnet Guideway of High Temperature Superconducting Maglev
High Quality MgB2/Nb Deposited by HPCVD Method
Degradation of Porosity and Enhanced Critical Current Density in MgB2 with a Toluene-Treatment Boron Powder
Effect of Various C Sources Co-Doping on Transport Critical Current Density and Grains-Connectivity of MgB2/Fe Tapes
Influence of Repeated Tensile Stress on Determining the Critical Tensile Stress/Strain of Copper Reinforced Bi-2223/Ag Tapes
A Review of the Ion Beam Assisted Deposition Researches towards Industrialization for the Second Generation High Temperature Superconducting Wire Fabrication
Numerical Analysis of Levitation Forces Dynamic Behavior in the HTS-Magnet Levitation System
Effect of Sintering Conditions on the Phase Formation and Microstructure of Bi-2223/Ag/Ni Composite-Sheathed Tapes
Effect of Firing Temperature on Microstructure and Superconductivity of YBCO Films Derived from Low-Fluorine Solution
Preparing Ultrathin MgB2 Thin Film by Ex Situ Annealing of Mg-B Precursor Film
Influence of Electron-Beam Annealing Duration on MgB2 Film Superconductivity
Preparation of EuBCO Epitaxial and Textured Films by F-Free Polymer-Assisted Chemical Solution Deposition Method
MOD-Derived YBa2Cu3O7-d Thin Films using a Fast Pyrolysis Process
Nano and Ultra-Fine Materials
Template-Directed Electrodeposition of SnO2 Nanotubes and 1D Zn/SnO2 Core-Shell Nanostructures
The Influence of High-Energy Ball Milling and Sintering Process on the Microstructure and Mechanical Properties of Al-Ni-Y-Co-La Alloy
Microstructure and Mechanical Properties of a Multi-Modal Al Alloy with High Strength
Preparation and Characterization of HGM-Ni0.5Co0.5Fe2O4 Core-Shell Particles by Homogeneous Coprecipitation
Effect of Severe Plastic Deformation at Ambient Temperature on Microstructures and Mechanical Properties of Aluminum Alloy 2519
Microstructural Characterization of an Al-Mg-Si Aluminum Alloy Processed by Equal Channel Angular Pressing
Hydrothermal Synthesis and Morphology Evolution of Perovskite PbTiO3 Crystals with Different Lead Sources
Atomistic Simulation Study on the Tensile Deformation Behaviour of Nanocrystalline Ni
A Strengthening Model of Cu-Cr In Situ Fibrous Composites Produced by Equal Channel Angular Pressing
Synthesis of Nano-WC by High-Energy Ball Milling
Microstructural Evolution of Fe-Based Metallic Glass/2024-Al Powder during High Energy Ball Milling Process
Study on the Preparation and Properties of Epoxy/PEI/Nano-Attapulgite Nanocomposites
Indentation Stress Relaxation Behavior in As-Deposited and Rolling Nanocrystalline NiFe
Influence of Annealing on Magnetic Performance for 1K107 Amorphous-Nanocrystalline Soft Magnetic Alloy
Effect of Annealing on Mechanical Properties of Copper Alloys Deformed at Cryogenic Temperature
Synthesis of Carbon Nanospheres with Small Diameterby Microwave Pyrolysis of Methane Directly
Interfacial Assembly of Two Gemini-Type Schiff Base Amphiphiles with Aromatic Spacers in Organized Molecular Films
Hydrothermal Synthesis and Photoluminescence of Pre-Perovskite Lead Titanate Nanofibers
High-Cycle Fatigue Behavior of Pure Iron with Gradient Structures Layer
Effect of Poly Sodium-p-Styrenesulfonate on the Phase Formation and Morphology of the Hydrothermally Synthesized Bismuth Ferrite Powders
Formation of Nanocale Oxide Particles and Evaluation of Threshold Stress of Fe-9Cr-0.2Ti-0.3Y2O3 Nanostructured Ferritic Alloy
Effect of Different Factors on Falling Process of Melt Electrospinning Jet
Microstructural Characterizations of Maraging Steel Processed by Equal-Channel Angular Pressing
Instability and Pattern Formation of Thin Liquid Films Sandwiched between Soft Elastomer Layers
Design of Quasi-Planar Ridge SOI Waveguide Resonator for Integrated Optical Gyro
Advances in Numerical and Experimental Study of Dielectrophoretic Assembly of Carbon Nanotubes
Mechanical Properties of Poly(3-hydrobutyrate-co-hydroxyvalerate)/ Biodegradable Hyperbranched Poly(ester amide) Blends
Synthesis and Characteristics of Dental Composites with Novel Bis-GMA Derivate as a Resin Base
Recent Progress on Research of Contact Resistance of Carbon Nanotubes
Surfactant-Induced Nanofibrous Architecture of Silk Fibroin Hydrogels
Hierarchical Porous TiO2 Fibre Synthesized by Cotton Template and its Photocatalytic Performance
Effect of Filler Ratio on Properties of Nanohydroxyapatite/SiO2 Based Bioactive Dental Resin Composites
Effects of Annealing on the Crystallization and Morphology of Electrospun Poly(L-lactic acid) Fibers
Fabrication and Characterization of CuInS2Sensitized TiO2 Electrodes Based on Improved SILAR Process
Preparation and Application of Nano Ce-Zr Mixed Oxides Supported H3PW12O40 in Nitrogen Oxide Capture and Decomposition
Biotemplate Synthesis of Porous Ceria Fiber and Study on its Catalytic Performance
Preparation and Properties of Nanocomposite Hydrogel by Photoinitiated Polymerization
Advanced Ceramic Materials
Influence of Titanium Sol on the Sintering Behaviour, Microstructure and Properties of Al2O3-SiO2 Ceramic Cores
Study on the Sintering Mechanism of Tin Oxide Ceramics Doping with Pr2O3
Properties of h-Bn/Si3N4 Composite Ceramics Fabricated by Gel-Casting
Effects of SiO2 and ZrO2 Additives on Microstructure and Properties of Al2O3 Ceramic
The Process Condition Research of SrAl2O4:Eu2+,Dy3+ Luminous Powder by Microwave Method
Preparation of Graphene Nanosheet/Alumina Composites
Preparation of Stable Pt Nanoparticles Supported by Mesoporous Silica SBA-15
Preparation of ZrSiO4/C Inclusion Pigments by Nonhydrolytic Sol-Gel Methed Combined with the Process of Carbon Black Modification
Preparation of TiB2/TiN Nanocomposites by SP
Influences of Excess PbO on Optical Properties and Microstructures of La Modified 0.75Pb (Mg1/3Nb2/3)O3-0.25PbTiO3 Electro-Optic Transparent Ceramics
Mechanical Properties of NanoSiC Reinforced ZrB2-Based Ceramic Composite
Mechanical Evaluation of the Porous Ceramics Prepared by Filtration with a Framework Structure of the Polycrystalline Fibers
Tensile Strength and Bonding Mechanism of the Mullite Eramic/Ceramic Sample Joined by Phosphate Adhesive
Study on the SiC-Al Co-Continuous Phase Composites
Study on the In Situ Growth of Carbon Nanotubes for the Reinforcement of Cf/SiC Composite Fabricated by CVI+PIP Process
Mechanism of Self-Propagating High-Temperature Synthesis of MoSi2
Application of Alumina-Magnesia Precast Blocks for LF Refining Ladle
Preparation and Electrical Properties of Mn-Co-Ni-O Thin-Film for NTC Thermistors Application
Sintering Performance of MgAl2O4 Spinel with Various Al2O3 Content
Effects of Al2O3 Species and Particle Sizes on Properties of Al2O3-Cr2O3 Refractories
Comparison of the Luminescence Properties of PbS Quantum Dots Prepared by Different Methods
Joining of High Strength Graphite with Silicon Resin and SiO2 Addition
Enhanced Humidity Stability of (Li,K,Na)NbO3-Based Lead-Free Piezoelectric Ceramics by Adding B2O3
Influence of Spinel on the Fracture Energy of Refractory Castable
Catalytic Properties of ZrB2-Based Ultra-High Temperature Ceramics Based on the Wall Temperature Response Method
Effect of Sheet Nanocarbon on Properties of Low Carbon Al2O3-C Refractories
Fabrication of Silicon Carbide Reticulated Porous Ceramics through Organic Foam Infiltration Process
Mechanical Properties of AlMgB14-xTiB2 Prepared by Field Activated and Pressure Assisted Synthesis
Microstructure of Short Carbon Fiber/Si3N4-Reinforced BAS Glass-Ceramic Matrix Composites
In Situ Synthesis of SiC and ß-Si3Al3O3N5 Whiskers in Alumina Carbon Based Materials
Porous TiN Ceramics Fabricated by Carbothermal Reduction Method
Synthesis of Aluminum Titanate Powder at Low Temperature via Nonhydrolytic Sol-Gel Method by Using Aluminum Powder
Energy-Storage Study in Lead-Free Anti-Ferroelectric Bi0.5Na0.5TiO3-BaTiO3-K0.5Na0.5NbO3 Ceramics
Antimony-Doped SnO2 Nanoparticles with Controlled Doping Level via Nonaqueous Sol-Gel Procedure
Effect of Gelation Process on Preparation of Aluminum Titanate Ultrafine Powder by Hydrolytic Sol-Gel Method
Fabrication of a SiC-Ti Functionally Graded Bonding Interlayer by Precursor Method
Fabrication and Mechanical Properties of SiC/Cu Composites with Zn Addition by Hot Pressing Sintering
Amorphous Alloy and High Entropy Materials
Evolution of Microstructures and Properties of the AlxCrCuFeNi2 High-Entropy Alloys
Effect of Ni on Microstructure and Mechanical Properties of Bulk Nanocrystalline Fe-Al Based Alloys Prepared by Aluminothermic Reaction
Fabrication Technique of Wide Nb42Ni40Co18 Amorphous Alloy Ribbons with High Melting Temperature
Microstructure and Electrochemical Performances of AlxFeCoNiCr(B) High Entropy Alloys
Effect of Fe on Crystallization Process of Zr-Co-Al-(Fe) Bulk Metallic Glasses
Preparation of Fe76Si9B10P5 Nanocrystalline Magnetic Cores by Direct-Nanocrystallizing Method during Spark-Plasma Sintering
Fabrication of Zr55Al10Ni5Cu30 Amorphous Composite Coating on Plain Carbon Steel by Laser Cladding and Remelting
Bio-Properties of Zr-Based BMGMC as Potential Hard Tissue Implants
Soft Magnetic Properties of the Fe76Si9B10P5/Zn0.5Ni0.5Fe2O4/PVA Composite Film
Tailoring Microstructures and Mechanical Properties of AlCoCrFeNiTi0.3 High-Entropy Alloys by Heat Treatment
Microstructure and Properties of Multi-Component AlxCoCrFeNiTi0.5 High-Entropy Alloys
Investigation of Viscosity Measurements of Molten Cu-Zr-Al Alloys
Diffusion Bonding of Fe-Based Amorphous Ribbon to Crystalline Cu
Cu-Zr-Nb Crystalline-Amorphous Composites Investigated by Thermodynamic Calculation and Ion Beam Mixing Experiments
Critical Cooling Rate for the Glass Formation of Fe80-XCoxP13C7 Alloy
Deformation Micromechanisms of a Ti-Based Metallic Glass Composite with Excellent Mechanical Properties
Effect of Nb Addition on the Glass-Forming Ability, Soft-Magnetic Properties and Mechanical Properties of CoFeNiBSiNb Bulk Glassy Alloys
