Current Material Research Using X-Rays and Related Techniques II

Erscheinungsjahr 2017
ISBN: 978-3-0357-1029-8
Verlag: Trans Tech Publications

Buch, Englisch, 564 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1080 g

The different experimental techniques are essential in the process of determining the characteristics of materials and in the creating of new technologies of them processing and synthesis. In this collection by results of the International Conference on X-rays and Related Techniques in Research and Industry 2016 (ICXRI2016, Putrajaya, Malaysia, August 17-18, 2016) are presented results of researches the properties for wide range of materials: metals, alloys, polymers and composites, biomaterials, semiconductors and ceramics. We hope this book will be interesting for many specialists from area of material science and related technologies.

Autoren/Hrsg.

Ahmad, Zainal Arifin

Meor Sulaiman, Meor Yusoff

Yarmo, Mohd Ambar

Abdul Aziz, Fauziah

Ismail, Khairul Nizar

Abdullah, Norazharuddin Shah

Abdullah, Yusof

Rejab, Nik Akmar

Ahmadipour, Mohsen

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Preface, Organizing Committee, Sponsors
Chapter 1: Traditional and Functional Ceramics
Characterization of 3 mol% Fe from Different Source Doped 8YSZ Ceramics
Dielectric Properties of Al2O3/CaCu3Ti4O12 Composite at High Frequency Range
Dielectric Properties of CaCu3Ti4O12/Al2O3 Composites
Effect of Alteration Ratios of Magnesia and Alumina in Non-Stoichiometric Cordierite Composition Formulations (2.(8-n)MgO.1.(5+n)Al2O3.5SiO2) on Phase Transformation and Crystallization
Effect of Calcination Temperature on the Breakdown Strength and Energy Density of CaCu3Ti4O12 Ceramic
Effect of Dispersant Addition on Properties of Ceramic Pieces from Kampung Dengir, Besut, Terengganu, Malaysia
Effect of Dispersant Amount to Fabrication of 3-D Porous Cordierite through Gelcasting Method
Effect of Firing Temperature on Mechanical and Physical Properties of Porcelain Balls as Grinding Media
Effect of Sintering Temperature on Structure and Dielectric Properties of Lead Free K0.5Na0.5NbO3 Prepared via Hot Isostatic Pressing
Effects of Milling Speed and Calcination Temperature on the Phase Stability of Ba0.5Sr0.5Co0.8Fe3-d
Effects of TiN Single Layer Coating on the Wear of ZTA Cutting Inserts and Surface Roughness of Workpiece
Elemental, Thermal, and Structural Characterization of ZnO Doped 8 mol% Yttria-Stabilized Zirconia (8YSZ) Ceramics
Fabrication of Lanthanum and Strontium Doped PZT Ceramics Using Solid State Reaction Method
Impact of Sintering Temperatures on Microstructure, Porosity and Mechanical Strength of Refractory Brick
Effects of Soda Lime Silicate Content on Industrial Stoneware Bodies Prepared by Pressing Method
Investigation of YIG’s Active Site Using Density Functional Theory
Production of Mullite Ceramic Bodies from Kaolin Processing Waste and Aluminum Hydroxide
Sol-Gel Synthesis of Niobium Doped Yttria Stabilised Zirconia
Structural Properties of Pb(Zr0.52Ti0.38Li0.1)O3 Prepared via High Planetary Mill
Synthesis and Characterization of Pb(Zr0.52Ti0.48)O3 Properties via High Planetary Mill
Synthesis and Characterization of Zirconia-Alumina Ceramics Doped Niobium Oxide
Tetragonal and Monoclinic Phase Transformation of ZTA-MgO Ceramic Cutting Tool by Machining Process
The Bending Strength of the Porcelain with the Substitution of Quartz by Palm Oil Fuel Ash
The Dielectric Properties of CaCu3Ti4O12 at Various Calcination Temperatures
The Effect of Different Silica Compositions to the Properties of Silica Foam Fabricated Using Slurry Method
The Role of Nb2Zr6O17 Phase on the Hardness and Fracture Toughness of ZTA/Nb2O5 by Cold Isostatic Pressing
Two-Body Dry Abrasive Wear Performance of High Velocity Oxygen Fuel Spray Process and Electrodeposited Cermet Coatings
Delamination of Kaolinite by Intercalation of Urea Using Milling
Characterizations of Pergau River Clay as Comparison to Mambong and Sayong
Effect of Na2O and K2O on the Solubility and Chemical Properties of P2O5-CaO-Na2O-K2O-Al2O3 Glass
Synthesis and Characterization of Cobalt Doped with Yttria-Stabilized Zirconia Electrolytes
The Effect of Flux to Physical and Chemical Properties of Ceramic Body Using Ball Clay from Kampung Dengir, Besut, Terengganu
Diversification Studies on Samarium Strontium Cobaltite Regarding Thermal & Structural Properties as Based Composite Cathode of SOFC
Rietveld Refinement Strategy of CaTa4-xNbxO11 Solid Solutions Using GSAS-EXPGUI Software Package
Chapter 2: Composite Materials and Polymers
Characterization of Silica Gel Impregnated with Tetradecylamine by X-Ray Diffractometry and Brunauer-Emmet-Teller Studies
Effect of Boron Carbide Content on Properties of Thermoplastic Natural Rubber Composite as Thermal Neutron Shielding
Effect of Curing Time and Sintering to the Properties of Geopolymer Mortars
Effect of Kenaf Fiber on Morphology and Mechanical Properties of Rigid Polyurethane Foam Composite
Flexural and Morphology Properties of Kenaf Fibre Reinforcement Unsaturated Polymer Composite
Influences of NBR/Al2O3/YSZ as Fillers for PMMA Composite on the Thermal Properties
Mechanical Properties of Copper Ferrite CuFe2O4-Polymer Composite Fabricated Using 3D Printer
The Effect of Graphene and Natural Rubber Content on Mechanical and Electrical Conductivity Properties of Epoxy/Natural Rubber/Graphene Conductive Materials
The Effect of Liquid Natural Rubber as Toughening Agent in Epoxy/LNR/CB Composite
The Properties of Epoxy/Graphene Conductive Materials Using High Speed Mechanical Stirrer and Bath Sonicator
Mechanical and Water Absorption Properties of Hybrid Kenaf/Glass Fibre Mat Reinforced Unsaturated Polyester Composites
Microstructure and Mechanical Properties of Cement Mortar Incorporate with Coated Expanded Polystyrene Beads
Effect of Glycerol on the Properties of Tapioca Starch Film
Extraction of Rice Straw Alpha Cellulose Micro/Nano Fibres
Chapter 3: Biomaterials and Biotechnologies, Nanomaterials and Nanotechnologies
Biomimetic Bone-Like Apatite Coating on Anodised Titanium in Simulated Body Fluid under UV Irradiation
Comparative Study of Chemical and Mechanical Treatment Effects on Bacterial Cellulose from Nata de Coco
Crystal Structure of TiO2 Nanotube Arrays Anodized at Different Voltage for Cell-Metal Interaction
Development of New Composition of Bioactive Glass Powder from SiO2-CaO-Na2O-P2O5 System through Melt-Derived Route
Effect of Temperature towards the Corrosion Behavior of Titania Nanotube Anodized in H2O2-Based Organic Electrolyte
Influence of Extraction Process (Pre-Treatment Time) on the Characteristic of Black Tilapia Fish Skins Gelatin
Properties of Aminosilane Modified Nanocrytalline Cellulose (NCC) from Oil Palm Empty Fruit Bunch (OPEFB) Fibers
Structural and Optical Characterization of TiO2/ZnO Thin Films Prepared by Sol-Gel Method
The Effects of Electron Beam Irradiation on Structural and Optical Properties of TiO2 Particles
The Effects of Substrate Orientation on Galvanic Growth of ZnO Structures
Fabrication and Characterization of ZnO Nanofibers by Electrospinning
EDS Analysis for Fruit Prunus Elemental Composition Determination
Study on Conversion Time of Brushite to Monetite via Hydrothermal Method
The Spectroscopic Analysis of Pandanus' Tristearin
Chapter 4: Materials for Opto- and Microelectronics
XRD and Photoluminescence Properties of CaSO4:Dy Phosphor Synthesized by New Co-Precipitation Method
Growth of ZnO on Flexible Substrate via Sol-Gel Hot Water Treatment
Structural and Surface Morphology of ZnO
Radiation Damage Study of Electrical Properties in GaN LEDs Diode after Electron Irradiation
Study of Eleiodoxa conferta (Kelubi) Fruit as Dye-Sensitized Solar Cell (DSSC) for Energy Conversion Efficiency
Modification of Optophysical Properties of Poly[(9,9-Di-N-Octylfluorenyl-2,7-Diyl)-Alt-(Benzo[2,1,3]Thiadiazol-4,8-Diyl)] Thin Film via Additions of TiO2 Nanoparticles
Chapter 5: Metals and Alloys
Corrosion Properties of Sn-9Zn Solder in Acidic Solution
Dissolution Method of Aluminum Foams Containing Mg Using Carbamide Space Holder
Effect of Noble Metal Silver on the Reduction Behaviour of Molybdenum Oxide Using Carbon Monoxide
Electrochemical and XPS Studies of Benzalkonium Chloride for Carbon Steel Protection in Hydrochloric Acid
Influence of Cerium Additive on the Reduction Behaviour of Tungsten Oxide under Carbon Monoxide Atmosphere
Polarization Study of Sn-0.7Cu Solder Alloy in 1M Hydrochloric Solution
Production of Cu-Sn-Zn Ternary Alloy Coating via Electroplating
Reduction of Molybdenum Trioxide by Using Hydrogen
The Effect of Dipping Time of Liquid Nitrogen on Mechanical Properties of Al Alloy 5083 via Cryorolling
The Impact of Composition and Sintering Temperature for Stainless Steel Foams (SS316L) Fabricated by Space Holder Method with Urea as Space Holder
High Temperature Oxidation Behaviour of Ni-Cr-, Ti- and Fe-Based Alloys in Flowing Wet Gas Environment
The Relationship between XRD Peak Intensity and Mechanical Properties of Irradiated Lead-Free Solder
The Effect of Annealing to the Hardness of Oxide Dispersion Strengthened (ODS) Fe-15Cr-0.3Y2O3 Alloy
Chapter 6: Environmental Engineering, Waste Recycling and Mineral Resources
Influence of Calcination Temperature towards Fe-TiO2 for Visible-Driven Photocatalyst
Influence of Reduction Temperatures on Reduction of FeO-Containing Slag by Agricultural Waste
Determination of Indoor 222Rn Concentrations Level on Different Room Sizes in Academic Building at Universiti Malaysia Kelantan Jeli Campus
Mineralogical Characteristics and Quantification of Mineral Phases in Malaysian Low Grade Manganese Ore
Preliminary Determination of Minerals in Mukah Coal
Sago Pith Waste Ash as an Addition to Fly Ash-Based Geopolymer Mortar
The Effects of Altitude Levels on 222Rn Concentration in Academic Building at Universiti Malaysia Kelantan Jeli Campus
Investigations of Outdoor and Indoor 222Rn Concentrations Level in Academic Building at Universiti Malaysia Kelantan Jeli Campus
Chapter 7: Materials and Technology for Chemical Engineering
Carbon Dioxide Adsorption and Desorption Study Using Bimetallic Calcium Oxide Impregnate

Über Autor(innen)

Eds. Zainal Arifin Ahmad, Meor Yusoff Meor Sulaiman, Mohd Ambar Yarmo, Fauziah Abd Aziz, Khairul Nizar Ismail, Norazharuddin Shah Abdullah, Yusof Abdullah, Nik Akmar Rejab and Mohsen Ahmadipour