Buch, Englisch, 840 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1600 g
Buch, Englisch, 840 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1600 g
ISBN: 978-3-03785-934-6
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface
Chapter 1: Plenary Keynotes
Microscopic Mechanism of Hydrogen Embrittlement in Fatigue and Fracture
3D Studies of Indentation by Combined X-Ray Tomography and Digital Volume Correlation
Influence of Microstructure, Environment and Temperature on Fatigue Crack Propagation in 2XXX Aluminium Alloys
Analysis of Fatigue Damage Accumulation in TiAl Intermetallics
Chapter 2: Atomistic Studies on Deformation and Fracture
Atomistic Model Analysis of Local and Global Instabilities in Crystals at Finite Temperature
Stress Analysis of Highly Constrained Copper Strips with through Crack Shaped Voids Using Molecular Dynamics
Dynamic Stability of Ni FCC Crystal under Isotropic Tension
Structural Transformation in Nanowires CuAu I with Superstructure of L10 of Tetragonal Symmetry at Uni-Axial Tension Deformation
Structural Response of Metal Crystallite with BCC Lattice on Atomic Level under Nanoindentation
Chapter 3: Deformation and Fracture Models Based on Crystal Defects Behaviour
Comparison between Pile-Up Singularities and Stress Fields Induced by Thin Slip Bands. Application to the Prediction of Grain Boundary Microcrack Nucleation
Planar Defects and Dislocations in C40 and FCC Lattices
Thermally Activated Dislocation Motion in an AS21 Alloy and Alloy Reinforced with Short Ceramic Fibres Studied at Elevated Temperatures
Deformation and Fracture of a Magnesium Alloy at Elevated Temperatures
Thermodynamics of Dislocation Pattern Formation at the Mesoscale
Modeling and Experimental Study of Long Term Creep Damage in Austenitic Stainless Steels
3D Discrete Dislocation Dynamics Applied to a Motion of Low-Angle Tilt Boundaries
Lattice-Spring Modeling of Graphite Accounting for Pore Size Distribution
Non-Planar Dislocations in MoSi2
Deformation and Fracture of Hydrogenated GaSe and InSe Layered Crystals
Chapter 4: Mathematical Modeling Microstructure, Deformation and Fracture
A Contribution to the Physical Interpretation of the Morphology of Fatigue Fracture Surfaces
The Simulation of the Fatigue Fracture Process at Random Loading
Numerical Life Estimation of Structure Components Subjected to Hydrogen Embrittlement and Cycling
Mathematical Model of Fan-Head Shear Rupture Mechanism
Jet Theory in Microstructures
Thermodynamically Consistent Model of Damage in Laminated Rocks
Micromechanics of Discontinuities and High Porosity Bands Formation in the Unconsolidated Sedimentary Rocks
Micromechanical Modelling of Advanced Ceramics with Statistically Representative Synthetic Microstructures
Mass-Velocity Correlation in Impact Fragmentation
Modelling of Thermal Fracture of Functionally Graded/Homogeneous Bimaterial Structures under Thermo-Mechanical Loading
Compression of Heterogeneous Material Systems Based on Wang Tilings
Numerical Investigation on the Size Effect of a WC/Co 3D Representative Volume Element Based on the Homogenized Elasto-Plastic Response and Fracture Energy Dissipation
Identification of Structural Parameters of Metal Fibre Concrete Using Magnetic Approach
Dynamic Recrystallization of the Alloy Fe-40at.%Al-Zr-B
Inaccuracy in Residual Stress Estimation and its Influence on the Residual Lifetime of Polymer Pipes
Criterion for Crack Kinking out of the Interface of Two Orthotropic Layers Subjected to Thermal and Mechanical Loading
The Experimental Study and Numerical Estimation of Fracture Toughness of Heterogeneous Welded Joints
Critical Value for Crack Propagation from Sharp V-Notch
Strength of an Elastic Plane with a Square Lattice of Circular Holes under External Loading
Evaluation of Three-Point Bending Fracture Tests of Concrete Specimens with Polypropylene Fibres via Double-K Model
Fracture-Micromechanics Based Model of Mortars Susceptible to Shrinkage
Crack Growth Modelling in the Silicon Nitride Ceramics by Application of the Cohesive Zone Approach
Temperature Field and Solidification Structure of a Ductile-Cast-Iron Roller
The Use of Computer Simulation in the Electronic Packaging Process
Numerical Simulation of Damage to Fracture Transition in Metals Based on the Statistical Model of Mesodefect Evolution
Application of Multi-Parameter Fracture Mechanics to Study of Crack Propagation Angle in Selected Mixed-Mode Geometry
Numerical Model of Plate from Hollow Core Panels with Contact – Target Pairs
A Numerical Estimation of Fatigue Crack Tip Plastic Zone Size and Shape under Mixed-Mode Loading Condition
Interrelation between Local and Global Characteristics of Cleavage Fracture
An Experimental, Numerical and SEM Study of Fracture in a Thin Polymer Film
Stochastic Fracture Simulations of Concrete Beams with Shallow Notches
Contribution to the Life Prediction of Aluminium Alloys Parts under Isothermal Fatigue
Chapter 5: Multiaxial Deformation and Fracture, Experiment and Modeling
Damage Mechanics and Critical Plane Approach to Multiaxial Fatigue
Modeling of Fatigue Crack Initiation in Wire-Bonds Using a Novel Approach of Strain Gradient Theory
Crack Growth Tendency of Surface Shear Cracks in Rolling Sliding Contact
Fatigue Crack Propagation in Steels for Railway Axles
Calibration of Selected Ductile Fracture Criteria Using Two Types of Specimens
Estimation of the Zone of Failure Extent in Quasi-Brittle Specimens with Different Crack-Tip Constraint Conditions from Stress Field
Geometry Transferability of Lemaitre's Continuum Damage Mechanics Model in the Plane Stress Specimens
Localized Plastic Flow Autowaves and the Hall-Petch Relation for Al
On the Correlation of Fracture Quantities in Small Punch Test
Influence of the Microstructure on the Fracture Behavior of Carbon Bonded Alumina
Mixed Mode Interlaminar Fracture of Carbon Nanotubes Enhanced Epoxy/Glass Fiber Composites
Features of Shock-Wave Processes and Fracture in Anisotropic Materials
Failure Mechanisms of an AISI 4135 Steel Submitted to the Disk Pressure Test under Helium and Hydrogen Gas
Measurement of Residual Stresses around the Notch of Tensile Specimens of the High-Cr Tempered Martensitic Steel F82H-Mod
Chapter 6: Nanomaterials: Technology, Properties and Modeling
Strength Hierarchy for Nano-Sized Crystals
Grain Refinement and Deformation Behaviour of Medium Carbon Steel Processed by ECAP
Deformation Mechanisms in Ultrafine-Grained Zn at Different Strain Rates and Temperatures
Interface Influence on Dispersion Dynamic of Metal Nanowires under Electric Pulse Loading
Details of the Formation of Superstructures in the Process of Ordering in Cu-Pt Alloys
Preparing of Silver Nanoparticles by Selective Dissolving of Aluminium Matrix
Glass Surface Refining by Deposition of Nano-Particles
Chapter 7: Biomaterials: Deformation, Fracture, Modeling
Quantum-Mechanical Study of Single-Crystalline and Polycrystalline Elastic Properties of Mg-Substituted Calcite Crystals
Porous Magnesium for Medical Applications - Influence of Powder Size on Mechanical Properties
Fractographic Analysis of Surface and Failure Mechanisms of Nanotitanium after Laser Shock-Wave Treatment
Multiscale Heterogeneity of Bone Microporosities and Tissue Scaffolds
Analysis of Compressive Properties of Porcine Temporomandibular Joint Disc
Experimental Studies of Elastic Properties of Dental Enamel and Photopolymer Used for early Caries Treatment
Mathematical Modeling of Caries Initiation and Progression Occurring in Dental Enamel
Evaluation of Developed Texture during Cold-Rolling Deformation of Ti-Nb-Ta-Zr Biocompatible Alloy
Recrystallization Temperature Influence upon Structural Changes of 90% Cold Rolled Ti-29Nb-9Ta-10Zr Biocompatible Alloy
The Impact of Graphite Source and the Synthesis Method on the Properties of Graphene Oxide
Computational Modeling of Porous Ceramics with Bioactive Layer
Local Mechanical Properties of Various Bone Cements
Chapter 8: Surface and Interface Microstructure and Properties
Solute Interaction in Grain Boundary Segregation and Cohesion
On the Micromechanisms of Fatigue Crack Propagation in Aluminum Cast Alloys
High-Density Ceramic Materials on the Basis of Silicon Carbide
Fibre-Matrix Interface Development during High Temperature Exposition of Long Fibre Reinforced SiOC Matrix
Estimation of Apparent Fracture Toughness of Alumina Based Ceramic Laminate
Siliconizing in a Fluidized Bed Reactor
Microstructure-Based Life Prediction of Thermal Barrier Coatings
Nanoindentation of Thin Copper Coatings
Influence of Low Pressure Plasma Spraying Parameters on MCrAlY Bond Coat and its Microstructure
Fatigue Response of Hybrid Ti/APC-2 Nanocomposite Laminates with Single-Edged Cracks
Surface Relief Evolution in IN792-5A Nickel Superalloy under High Temperature Fatigue Straining with Hold Times
The Changes of Fatigue Properties in Aluminium Cast Alloy during Solution Treatment
Characteristics of Duplex Treated AISI 304 Stainless Steel
Influence of Localized Structural Defects on the PN Junction Properties
Particulate Composite Damage: Numerical Estimation of Micro-Crack Propagation Direction
Study of the Influence of Structural Defects on Properties of Silicon Solar Cells
Investigation of the Mechanical Properties of Lead-Free Solder Materials
Photo-Reflective Layer on Low Temperature Co-Fired Ceramic for Optical Applications
Degradation of TBC Coating during Low-Cycle Fatigue Tests at High Temperature
Assessment of the Unstressed Lattice Parameters for Residual Stresses Determination by Neutron Diffraction in Engineering Materials
The Influence of Long-Term Heat Treatment on Microstructure of Zr-Modified Aluminide Coating Deposited by CVD Method on MAR M200+Hf Nickel Superalloy
Thermal Analysis of Halide Activator Used in Aluminizing of TiAl Intermetallics
The Effect of Long-Term Annealing on Microstructure of Aluminide Coatings Deposited on MAR M200 Superalloy by CVD Method
Chapter 9: Advanced Experimental and Theoretical Methods for Microstructure Investigation
Complex Metallic Alloys – Microstructure Characterization
Kinetics of Deformation Processes in a High-Alloy Cast TWIP Steel Determined by Acoustic Emission and Scanning Electron Microscopy
Microscopic Strain and Crystal Rotation Measurement within Metallurgical Grains
Advanced Microstructure Studies of an Austenitic Material Using EBSD in Elevated Temperature In Situ Tensile Testing in SEM
A Comparative Study on Infrared Thermography during Ultrasonic Fatigue Testing of Cast Steel 42CrMo4 and Cast Aluminium Alloy AlSi7Mg
Quantification of Liver Microcirculation Using X-Ray Microtomography of Vascular Corrosion Casts
Experimental Study of Defect Induced Temperature Evolution in Polycrystalline Metals
Effect of Heat Treatment on Formation of Al-Al3Ni Hypereutectic Alloys
Formation of Structurally Complex U-Phase in Al72Pd12.8Co15.2 Alloy
Using Acoustic Emission in Fracture Monitoring of Cementitious Composites
Influence of the Surface Treatment of Tubes on the Heat Transfer in Low Pressure Atmosphere
Experimental Studies of Excess Noise Sources in Concrete Based Materials as a Limiting Factor for Electromagnetic Emission Measurement
Mechanical Induced Defects and Fractures in the Silicon Solar Cell Structure
Comparing the Properties of Polypropylene Fibers Contained in Ordinary and Lightweight Concrete Using Three-Point Bending Tests with Stress Concentrator and Acoustic Emission Method
A FPGA-PC Based Acoustic Emission System with Logarithmic Preamplifier for Fracture Monitoring
Monitoring of the Damage in Stone Blocks by Means of Non-Destructive Methods
Detection of Inhomogeneities and Cracks in Composite Materials by the Method of Partial Discharges
Study of Initial Stages of Fatigue Process Using Non-Destructive Testing Methods
Microstructural Investigations of Nickel-Based Superalloys with Different Structure
Chapter 10: Experimental Studies on the Relation between Microstructure and Mechanical Properties
Advanced 3D Packaging of Chips and Materials Integrity: Stress-Induced Effects and Mechanical Properties of New Ultra Low-k Dielectrics for On-Chip Interconnect Stacks
Fracture of Irradiated Austenitic Stainless Steel with Special Reference to Irradiation Assisted Stress Corrosion Cracking
The Effect of Radiation-Induced Structural Changes under Accelerated Irradiation on the Behavior of Water-Cooled Reactor Pressure Vessel Steels
Intergranular Embrittlement of Nuclear Reactor Pressure Vessel Steels
Influence of Morphology of Deformation Induced a´-Martensite on Stress-Strain Response in a Two Phase Austenitic-Martensitic-Steel
Microstructure-Related Scratch Resistance and Indentation Creep Behavior of PA6 and PA6 Nanocomposites
Damage and Fracture Behaviours in Aged Austenitic Materials during High-Temperature Slow Strain Rate Testing
Structural and Fatigue Properties of Titanium-Steel Bimetallic Composite Obtained by Explosive Welding Technology
Structural Modifications of the Aluminium Alloy in Conditions of Additional Shock Impulse Load
Influence of Cooling Rate on Final Properties of Laboratory Rolled Products
Extrapolation of Sigmoidal Creep Curve by Strain Acceleration Parameter
Determining Elastic-Plastic Properties of Al6061-T6 from Micro-Indentation Technique
Production of Al Metal Matrix Composites by the Stir-Casting Method
Elastic Properties of Porous Alumina, Zirconia and Composite Ceramics
Standing Contact Fatigue Analyse of Steels with Different Microstructures
High Temperature Fatigue Strength and Quantitative Metallography of an Eutectic Al-Si Alloy for Piston Application
Effects of Different Microstructure on Resistance of EA4T Railway Axle Steel of Equal Strength to Fatigue Crack Growth
Investigation of the Microstructure Factors Affecting the Brittle Fracture Initiation of Pre-Cracked Charpy-Type Samples of VVER-1000 RPV Steel
Microstructure and Mechanical Properties of Rapidly Solidified Al-Fe-X Alloys
Heat Treatment Effects on Static and Dynamic Mechanical Properties of Sintered SINT D30 Powder Metal
Influence of the Composition of Cement Mortars Modified by Lime or Polymers on the Mechanical Properties and Microstructure of Mortars
Influence of Fly Ash on Abrasion Resistance of Concretes with their Additions
Relation between Microstructure and Tribological Properties of High Density Polyethylene Hybrid Composites Filled with Untreated Glass Spheres, Talc and Calcium Carbonate
Influence of Heat Treatment on Crack Tip Opening Displacement and on Resistance of Crack Propagation of Alloyed Steel
Autowave Features of Plastic Deformation by Ductile Fracture
Effect of Adding Graphite Powder to a UP Polymer on Friction and Wear for Different Loads and Rubbing Speeds
Mechanical Behavior of Steel-Chips-Reinforced Concrete
Acoustic Emission from Quasi-Brittle Failure of Cementitious Composites - Experimental Measurements and Cohesive Crack Model Simulations
Influence of Heat Treatment of High-Speed Steel on its Microstructure, Hardness and Fracture Toughness
Fatigue Characteristic of Aluminium Alloy 2024 under Cyclic Bending with the Controlled Energy Parameter
Microstructure and Defects Evaluation of Varistors by Ultrasonic Waves in Low Frequency Range
Influence of the Titanium and its Alloys Microstructure on the Fatigue Crack Paths
High-Temperature Elastic Properties of Ceramics in the System MgO-Al2O3-SiO2 Measured by Impulse Excitation
Thermal Effects while Fatigue Cracking Growth under Bending
Influence of the Microstructure near the Interface on the Fatigue Life of Explosively Welded (Carbon Steel)/Zr Clads
Microstructural Aspects of Low Cycle Fatigue of Aged GX12CrMoVNbN9-1 Cast Steel
Fatigue Fracture of Turbine Blades: Case Studies
Bending Fatigue Behaviour of Diffusion and Thermal Barrier Coating Systems
Nanoindentation and Microstructural Study of Cu-Co Alloys after Severe Plastic Deformation
Mechanical Aspects of Plastic Deformation of Nickel Based Superalloy
Relations between Microstructure and Mechanical Properties in Laminated Ti-Intermetallic Composites Synthesized Using Ti and Al Foils
Chapter 11: Micromechanisms of Fracture and Fatigue (ESIS TC2)
Fatigue Cracking and Acoustic Emission Regularities in Metals: Crack Origination and Growth
Deformation Behaviour of Asymmetrically Fatigue Cycled Metallic Materials
An Effect of the First Non-Singular Term of the Williams Asymptotic Expansion to the Stability of the Bi-Material Orthotropic Notch
Fatigue Crack Growth of Thin Wall Magnesium AZ91 Alloy Cast
Short Crack Growth Behavior in Ferrite-Bainite Dual Phase Steels
A Discrete Model for Diffusion-Induced Grain Boundary Deterioration
Role of Microstructure on Fracture Behavior of T91 Steel in Presence of Liquid Sodium
Transition from Straight to Fractal Cracks due to Projectile Penetration
The Effect of Temperature on the Course of Refractory Castables Cracking
Temporal and Spatial Evolution of Bursts in a Fiber Bundle Model of Creep Rupture
PSBs and Non-Propagation of Small Surface and Interior Cracks in Polycrystalline Copper
The True Shape of Persistent Slip Markings in Fatigued Metals
Slip Activity of Persistent Slip Bands in early Stages of Fatigue Life of Austenitic 316L Steel
Propagation of Fatigue Cracks in Notched Specimens of EN AW 7475-T761
Trajectory and Crystallography of Crack Growth in Austenitic Steel after LCF Tests
Experimental Investigation of Modes II and III Fatigue Crack Growth in Unalloyed Titanium
Complex Evaluation of Fatigue Tests Results of Plain C30/37 and C45/55 Class Concrete Specimens
Magnesium AZ91 Alloy Cast Mechanical Properties Measured by the Miniaturized Disc-Bend Test
The Role of Second Phase Intermetallic Precipitates in Fatigue Fracture Mechanism for Aluminum Alloy AW 7075
