Buch, Englisch, 798 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1470 g
Buch, Englisch, 798 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1470 g
ISBN: 978-3-0357-1834-8
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface
Chapter 1: Additive Manufacturing
Determining the Optimal Mode of the Inconel 718 Alloy Deposition at a Direct Laser Deposition Plant
Modeling and Optimization of Additive Systems Based on Intelligent Technologies
Influence of Surfacing Modes on the Formation of Pores in the Deposited Metal Produced by Wire Arc Additive Method (WAAM) Using Al-Mg Alloy
Mortar for 3D Printing Based on Gypsum Binders
Measurement Assurance of Additive Manufacturing on the Example of Laser Surface Polishing Products by Remelting
Optimization of Temperature Regimes of the Hotend for Devices of Additive Manufacturing
Stress Simulation of the Structure of a Stretch Die Made by Fused Deposition Modeling
Experimental Investigation of Nozzle Clogging Using Vibration Signal-Based Condition Monitoring for Fused Deposition Modeling
Cold Resistance and Mechanical Properties of 07Cr25Ni13 (ER309LSI) Stainless Steel Obtained by 3D Printing by Electric Arc Surfacing on a CNC Machine
Investigation of the Peculiarities of Deformation and Fracture of Metals Obtained on the Basis of 3D Printing with Registration of an Acoustic Emission Signal
Kinematic Error Modeling of Delta 3D Printer
Towards the Possibility of Additive Manufacturing of XNA-Based Devices Using Molecular Engineering Principles
Sample Printing Device for Additive Manufacturing of Electronic Housings
Technology for Producing Fine Tungsten Carbide Powders
Cyber-Physical Hybrid Processing System Digital Twin
Chapter 2: Polymers, Composites and Ceramics
The Structure and Properties of Dispersed Aluminium Composite Compounds Made by Welding Friction with Mixing
Influence of Additive’s Concentration on the Temperature Conditions for the Formation of the Solid Solutions of the System MgAl2O4-Ga2O3
Studies of Magnetically Active Silicone Elastomers on a Vibrostend
Comparative High-Field Magnetization Study of (Sm,Er)2Fe17 and Er2Fe17 Compounds and their Nitrides
Accelerated Weathering Testing of Polypropylene Tank Materials
Improvement of Thermal Conductivity for Carbon Fabric Composites Base on the Fabric Structure
The Patterns of Phase Composition and Properties of High-Calcium Low-Density Ceramics Formation Based on Argillous Raw Materials of Various Chemical and Mineralogical Composition
Study of the Effect of Tungsten Carbide Nanopowder Agglomerate Additives on the Strength Properties of Carbon Fiber-Reinforced Plastic
Research on the Synthesis of Proppants Applied for Oil Production by the Method of Hydraulic Facing
Creation of Basalt Plastics with Different Types of Hybrid Matrices
New Technologies for Producing Multifunctional Reinforced Carbon Plastics
Features of Mechanical Treatment of Zirconia Crystals when Manufacturing Dies
Experience of High-Density Polyethylene as a Binding Substance in Grinding Wheels
Synthesis of a Composite Alloy Based on Ore Concentrate and Oxide Compounds
Chapter 3: Metallurgical and Metalworking Technologies
Improvement of Method and Mechanism for Conical and Paraboloid Springs Hardening
Crimping Power Modes with Thinning of the Deformable Element of the Steel Pipe
Optimization of Cutting Conditions with an End Mill According to the Criterion of the Smallest Amplitude of Vibration
Milling of Electron Beam Melting Ti-6Al-4V by HSS Instrument with Combined Surface Treatment
Residual Stresses Determination near FSW Joints by Combining the Hole Drilling Method and Reflection Hologram Interferometry
Controlled Process of Crystallization in Weld Pool
Investigation of Influence of Magneto-Hydrodynamic Processes on Structure Formation and Alloying of Steels by Electroslag Remelting
Specific of the Recrystallization Driving Force Calculation on the early Stages of Thermomechanical Treatment of Aluminum Alloys
Drawing of Square Blanks in a Cylindrical Die with Controlled Movement of the Edges
Science-Based Technologies in the Manufacture Liquid Rocket Engines Filter Element Channels
Isothermal Crimping of Thick-Walled Shells
Research of the Influence of the Physical and Mechanical Properties of the Workpiece Material on the Temperature Field of the Turning Process
Modeling the Deformation of Non-Rigid Shafts during Turning on CNC Machines
Mathematical Modeling of Process Optimization in Profiling Grinding Wheels via Laser
Structural Features and Distribution of Silicon in Ferrosilicon-Magnesium Modifiers
The Study of the Effect of Thermal Deformation Treatment Modes on the Microstructure and Properties of the Heat-Resistant Nickel Alloy VZH159
Investigation of the Effect of Hardening Heat Treatment Modes on the Properties of Products Made of Silicon-Nickel Bronze
Experimental and Computational Method for Determining Temperature Stresses in the Welding of Structures Made of Carbon and High-Alloy Structural Steels
Forecasting of the Possibility of Fragile Destruction Top of Cutting Blade of a Thread Forming Tool
Experimental Studies of Deformation and Temperature Processes Mandrelling in the Deform-3D System
Use of Digital Twins for Mathematical Modeling of Ultrasonic Cutting of Titanium Blanks
Analytical Modeling of Cutting Forces and Technological Parameters Interrelation when Grinding Shafts' Ends by a Grinding Wheel End on Circular Grinding Machines
The Correlation of Movements in the Technological System during Grinding Precise Holes
Model of Layer-by-Layer Cooling Trajectory in Rolled Products by TMCP
Application of an Ultra-Compact Eddy-Current Transducer for Investigation of Defects in Welded Joints of High-Strength Steel
Diagrams of Isothermal Decomposition of Overcooled Austenite in Maraging Steel at Uniaxial Tensile Loading
Chapter 4: Coatings and Surface Treatment
Research on Chrome Plating Quality of the Internal Surfaces in the Hydraulic Drives with Hydrostatic Guideways
Analysis of Phase Composition and Properties of Composite Nickel-Phosphoric Coatings Using Wear-Resistant and Antifriction Modifying Agents
Study of the Influence of the Shape of Internal Cavities on the Nature of Wave Strain Hardening
Structure and Properties of a Local Diffusion Discrete Coating Applied to High Speed Steel
The Study of the Formation Process of Microstructure and Properties during Laser Alloying of the Surface of the Structural Steels
The Peculiarities of Mass Transfer in the Surface Layer of Materials under Extreme Heating
Production of Colored Phosphate Coatings on Steel
Functional Gradient Heat-Resistant Materials Manufactured by Spark Plasma Sintering
Obtaining of Coatings from Ni-Al by Electro Spark Deposition and Surface Smoothing by Ultrasonic Plastic Deformation
Composition and Properties of High-Entropy CrZrTiNiCu Coating
About Determing the Microhardness of Composite Coatings
Influence of Mechanical Activation and Mechanical Alloying on the Structure, Phase State of the Fe-Ni-Co-Al-Nb Powder Composition and on High-Entropy Coatings Based on it
Features of Obtaining Multicomponent Magnetron Targets for the Formation of Non-Porous Transformation-Hardenable Coatings of a Given Composition
Changing the Sizes of Details Made of Aluminum Alloys during Microarc Oxidation Process
Investigation of the Properties of Heat-Protective Coatings to Improve the Performance of Products
Wear Resistance of Experimental Hard Alloys Grades with Co-Mo-Ti Binders upon Conditions of Friction without Lubricant on Stainless Steel
Dependence of Surface Profile on Diamond Impregnation Characteristics
Influence of the Initial Grain Size on the Structural-Phase State of the VT20 Titanium Alloy Surface after Implantation
Influence of the Structural State of Titanium Alloy on the Depth of Penetration of Ions during Implantation
Investigation of Residual Stresses during Processing of GTE Blades with Microbeads
Numerical Simulation of the Laser Infusion Process of a Ni-Cr-B-Si Cover Strengthened with Zirconium Oxide Particles
Modification of the Surface of a Reconditioned Cutting Tool via Laser Ablation
Modeling of the Contact Interaction of the Tool Indenter with the Part Surface when Processing by Surface Plastic Deformation Methods
Theory of Formation of Edge’s Surface Roughness Finished by Radial Polymer-Abrasive Brushes
Solving the Inverse Problem of Recovering the 3D Surface of a Detail According to its 2D Projections in the Modelling of Electroplating Processes
Properties of Vibro-Abrasive Treatment by Combination the Kinds and Granulometric Characteristics of the Medium
Grinding of High-Strength Materials
Evaluation of the Possibilities of Processing High-Alloy Corrosion-Resistant Steels during Grinding Operations
Study of the Silicon Carbide Wear Area after Micro-Scratching of Titanium, Zirconium, Niobium and Molybdenum at a Speed of 35 m/s
Membrane Surface Morphology before and after the Reversible Hydrogen Doping of Diffusion Filters
Chapter 5: Modeling and Numerical Evaluation of the Mechanical Properties of Materials
The Influence of Elastic Nonlinearity on Wave Processes in Media with Dislocations
Influence of the Form Factor on the Results of the Fracture Process Modeling under Uniaxial Tension
Experimental and Analytical Determination of the Coefficient of Dynamic Loading in the Contact Interaction of Bodies
Neural Network Modeling of the Fatigue Strength of Metal Materials at Low Temperatures
Chapter 6: Building Materials
Structural Changes in Concrete under the Influence of Reactor Spectrum Neutrons
The Damping Effect in the Propagation of the Cracks in Fine-Grained Carbonate Concrete
Estimation of the Probability of Cracking of Facade Coatings
Development of Compositions of New Enamel Coatings with Various Operational and Decorative Properties to Protect Steel Architectural and Construction Panels
Development of Polystyrene Foam Plates and Sprayed Concrete for Three-Layer Products and Structures
Regulation of Rheological Properties of Three-Phase Dispersed Systems Used for the Production of Building Materials
Reducing the Emission Activity of Vanadium from Building Materials
Chapter 7: Technologies of Metallurgical and Metalworking Waste Recycling
Optimization of Compositions and Hardening Conditions of Vibropress Concretes Based on Steel-Making Slag
The Structure and Properties of Asphalt Concrete on the Basis of Waste Foundry Sand
Application of Fuel Ash as a Microfiller in Cement Dispersion Systems
Steelmaking Slag - A Complex Material for the Production of Small-Size Materials Using Hyper-Press Technology
Obtaining Calcium Sulfoaluminate Using Aluminate Waste
Novel Materials for Myco-Decontamination of Cyanide-Containing Wastewaters through Microbial Biotechnology
Improving the Efficiency of Metal Production Waste Processing in Electromagnetic Field
Investigation of the Fluxing Additives Effect on the Foaming of Different Silicate Raw Materials
