Selected, peer reviewed papers from the 2014 4th International Conference on Materials Science and Information Technology (MSIT 2014), June 14-15, 2014, Tianjin, China
Buch, Englisch, 6160 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 11180 g
ISBN: 978-3-03835-173-3
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde
- Mathematik | Informatik EDV | Informatik Angewandte Informatik Computeranwendungen in Wissenschaft & Technologie
- Medizin | Veterinärmedizin Medizin | Public Health | Pharmazie | Zahnmedizin Medizin, Gesundheitswesen Medizintechnik, Biomedizintechnik, Medizinische Werkstoffe
- Technische Wissenschaften Sonstige Technologien | Angewandte Technik Medizintechnik, Biomedizintechnik
- Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Verfahrenstechnik, Chemieingenieurwesen
- Technische Wissenschaften Technik Allgemein Computeranwendungen in der Technik
- Technische Wissenschaften Technik Allgemein Modellierung & Simulation
Weitere Infos & Material
Preface
Chapter 1: Advanced Materials Science, Chemical Engineering and Processing Technologies
High Value Added Utilization of Vanadium Slag
Preparation of Zeolite 4A Using Laterite Nickel Slag and the Characteristic Study of CO2/N2 Separation
Bi2S3 Nanoflowers Synthesized via Hydrothermal Method
Study of Oxidation Degradation Eosin by Ferrate
The Relationship between Calcium Hydroxide Concentration in Pore Solution and the Strength of Stabilized Soils
Development and Application of the Screw Separator
On Laser Shock Processing to Improve Hot Corrosion Resistance of In718 Superalloy
Extraction and Purification of Fluorene from Wash Oil
Microwave Hydrothermal Synthesis and Characterization of In2O3 Nanocrystalline
Synthesis of High-Strength and Water-Resistant Phosphogypsum Small Hollow Block
Study on Laser Micro Shock Effect on Electrical Resistivity of Nanometer Copper Film
Effect of Process Parameters on Residual Stress Distribution during Direct Laser Metal Deposition Shaping
Plasma-Induced Degradation of Benzene in Aqueous Solution
Liquid Phase Rhodamine Boxidation Induced by Plasma with Glow Discharge Electrolysis
The Preparation of ZnO: Al Thin Films on Flexible Substrates by Magnetron Sputtering Method
Analysis Analysis and Suggestions on Device Clamp Screw Fracture of 110kV Transmission Line
Ply Thickness’ Effect on Composite Laminate under Low-Velocity Impact
Study on the Synthesis of Ethylene Glycol by Catalytic Hydrolyze of Ethylene Carbonate
Efficient Synthesis 2,3-Dihydroquinazolin-4(1H)-Ones Using Coconut Shell Char Sulfonic Acid as a Reusable Catalyst in Ethanol
Study on the Urea Demand Model of SCR Control Technology
Effect of Sodium Methylacrysulfonate upon the Molecular Weight and Performance of Polycarboxylate Superplasticizer
Influence of the pH Value on the Water-Reducing Performance of Polycarboxylate-Based Superplasticizers at Room Temperature
Preparation and In Vitro Release Behaviors of Paclitaxel-Loaded Pluronic F87/Poly(Lactic Acid) Nanoparticle
Application of High-Efficiency Reverse Osmosis Technology in Reclaimed Water Treatment in Power Plants
Measurement of Ultra Low Sulfur in IN718 by Using Infrared Absorption Method
The Synthesis and Characterization of Polyphenylene Vinylene (PPV) Derivatives with Alkoxy Branched Chains
Comparison and Characterization of Two Preparation Methods of Graphene Oxide
Detection of Phase Purity of Sr2FeMoO6 by Raman Spectroscopy
A Novel Environment Friendly Material: Sucrose Char Sulfonic Acid Catalyzed Three-Component Mannich Reaction
Investigation of Sewage Sludge Anaerobic Digestion Performance Using Peracetic Acid as a Pretreatment
Synthesis and Characterization of Sulfonated Poly(Arylene Ether Sulfone) Multiblock Copolymers for Proton Exchange Membrane
Study on Carbon and Sulfur Detection by Using Infrared Absorption Method
Effects of the Carboxyl Density on the Properties of Polycarboxylate-Type Superplasticizer
Preparation of Copolymer Modified with Oxidized Starch and Dispersion Ability for Ferric Oxide
Corrosion Inhibitor Polymer Modified with Acid Activated Attapulgite: Preparation and Performance of Dispersing Ferric Oxide
Preparation of a Novel Magnetic Stir Bar for the Pretreatment of the Plasticizers in Lake Water
Simulation of CVD Diamond Film Growth by Method of Revised KMC
Relaxation Properties of the Solid Propellant Based on Hydroxyl-Terminated Polybutadiene
Effect of Fiber’s Surface Pretreatment on the Interfacial Bonding Strength between Steel Fiber and Resin
Synthesis Alloy and Composite Materials of Nano-Silver-Nickel
Synthesis and Phase Behavior of a New Thiophene Monomer as Nematic Liquid Crystal
Synthesis of Novel Cationic Asphalt Emulsifier and its Investigation by Online FTIR Spectrophotometry
Original Silk Pre-Oxidation Treatment of Carbon Fiber from Coal Tar Pitch
Study on the Pathway of CS Stimulant with KMnO4 Solution
New Seawater Flocculants
Research on the Corrosion Resistance of Tinplate with Reflowing Technology
Effect of Ferrite Volume Fraction on Mechanical Properties of X80 Pipeline Steel
Computer Simulation: A Tool for Researching the Basic Physical Properties of NiAl and Ni3Al
Newly Determined Crystal Structure and Optical Property of the Intermetallic NiAl and Ni3Al Alloys: A First-Principles Computer Simulated Investigation
TiO2-Based Composite Film for the Photodegradation of Methyl Green
Synthesis and Characterization on a Kind of Polycarboxylate Superplasticizer
Synthesis for an Amide-Ester Type Polycarboxylate Superplasticizer and its Application in Concrete
High Cycle Fatigue Performances of Advanced High Strength Steel CP800
Preparation and Dielectric Property of Ag/PVDF Composite Film
Microstructure and Wear Resistance of Cu0.9NiAlCoCrFe High Entropy Alloy Coating on AZ91D Magnesium Alloys by Laser Cladding
Temporal and Spatial Characterizations of Zn Ions in Plasma by Pulsed-Laser Ablation of Zinc Metal in Vacuum Condition
Lignite-Fired CFB Boiler SO2, NO Emission Control Technology Research
Laying the Ground of Indoor Restrooms by Using Foam Glass and Waterproof Coating
Influence of Mo Addition on a Nickel-Base Single Crystal Superalloy
Superhydrophobicity of Silicon-Based Microstructured Surfaces
Research on Erosion Resistance of TiB2 Ceramic Particle Reinforced MMC Coating
The Application of New Material in Industrial Design
Spherical SrCO3 Nanopowder Synthesized by Super Gravity Method
Synthesis of a Novel Donor Unit for Organic Light-Emitting Materials: 10-octyl-3,7-di(thiophen-2-Yl)-10H-Phenothiazine
Current Situation and Latest Development of Intelligent Materials
Synthesis of a Novel D-A Type Molecule Based on Carbazole Unit for Organic Light-Emitting Material Applications
Growth Behavior of WC Grains in Ni3Al Matrix during Liquid Phase Sintering
Synthesis and Characterization of Nano Melamine Phosphate
Preparation and Characterization of Transparent Oxyfluoride Tellurite Glass-Ceramics Containing CaF2 Nanocrystals
Influence of Electrolysis and Plasma Polishing on Surface Properties of SUS304 Stainless Steel
Effect of Initial Concentration of Cu2+ on the Adsorption Performance of Hydroxyapatite
Li0.95Na0.05Ti2(PO4)3/C with Good Performance as Anode Material for Aqueous Rechargeable Lithium Batteries
Effect of Melting Temperature on Microstructure of In Situ TiC/Al Composite and Formation Mechanism of TiC
Effect of Cr on Microstructure and Mechanical Properties of Al–3.2Mg Alloys
Research on Preparation of Aluminum-Metal Coating and its Microstructure by Melting-Casting
Research Progress of Graphene-Based Composites in Supercapacitor
Dielectric Barrier Discharge Plasma Reduced Pt Catalysts Supported on Activated Carbon and their Electrocatalytic Activity
Preparation of Au/P25 Catalysts for Removal of CO by Dielectric Barrier Discharge Plasma
Kinetics of Inverse Emulsion Copolymerization of Dimethyl Diallyl Ammonium Chloride and Acrylamide
Research of Formation Mechanics on Nanostructured Chips by Multi-Deformations Based on Finite Element Method
Single Frequency LD-Pumped 2.09 µm Cr, Tm, Ho: YAG Microchip Laser
Review and Prospect on Tear Damage Research for High-Performance Flexible Fiber-Reinforced Composite Material
Influence of Volume Fraction of Piezoelectric Ceramics on Poperties of PZT672/Epoxy1-3 Piezocomposite
Luminescence Properties of Rare-Earth Co-Doped Phosphate Glasses for White Light Emitting Diodes
Monolithic Porous Graphene/Poly(Vinyl Alcohol) Gels: Preparation, Structure and Dye Adsorption
Research Progress for High Strength Structural Steel and Key Issues of Application in Seismic Zone
Luminescent Properties of Ca1-xBaxSnO3: Eu3+, Dy3+ Composites Prepared by Coprecipitation
Study of Dislocation Densities of Thick GaN Films
The Luminescence Properties of Green YPO4: Tb3+,Ce3+ Phosphors for WLED
Preparation and Luminescent Properties of Single White Ca2MgSi2O7: Eu3+, Ce3+, Tb3+ Phosphor for WLED
The Temperature Control of the Preheating Tank in the Procedure of Chloroacetic Acid’s Crystallization
Effects of SnCl4 Concentration on the Properties of Electroless Deposited Ni-Sn-P Coatings
Application of Environmental Rubber in Concrete Road Engineering
Hot Water Extraction of Corncob Hemicelluloses to Prepare Composite Films
Analysis of the Atmospheric Particles Governance Based on Aerosol Hygroscopicity
Effect of Ni on Corrosion Resistance of Weathering Steels in Wet/Dry Environments
Corrugated Waist Rail Microstructure Evolution Simulation
The Recrystallization of Corrugated Waist Rail in the Rolling Process
Behavior of Geosynthetic Clay Liners due to the Migration of Heavy Metal
Study on the Morphology and Thermal Stability of Li2SrSiO4: Tb3+ Materials
Study on CO2 Adsorption of Halloysite Modified by Silane Coupling
Electrochemical Behavior of the Initial Atmospheric Corrosion of 2Cr13 Steel in Guiyang City Atmosphere
The Difficulties of Dyeing of Flax Fiber and the Improving Method
Spatial Distribution of Heavy Metal in Urban Soil of China
Research on Chloride Appropriate Dosage for Incorporated Accelerated Corrosion
Effects of Feed Rate and pH Value on the Physical and Electrochemical Properties of LiNi0.4Co0.2Mn0.4O2 Cathode Material for Lithiumion Battery
Optical Absorption Study of Ar+ Implanted SrTiO3 Single Crystals
Au Nanoparticles Prepared by Microwave Irradiation
Test and Research on Controlled Cooling Technology for High Carbon High Silicon Wire Rod of S87B
Simultaneous Determination of Ruthenium, Zinc and Zirconium in Waste Zirconium Dioxide Loaded Ruthenium-Zinc Catalysts Using Inductively Coupled Plasma Optical Emission Spectrometry
Propagation Characteristics of Seismic Waves Taking Stratigraphic Composition into Consideration
Effect of SO2 on Mn-Mg-Ox Catalyst Treated by Non-Thermal Plasma for NO Catalytic Oxidation
Synthesis and Characterisation of a Novel Thermoresponsive Dendronized Monomer Bearing Azobenzene Moiety
Temperature Controlled Dispersion of Multi-Walled Carbon Nanotubes in Water with Poly[(N-Isopropylacrylamide)-Co-(Ionic Liquid)]
Rapid Repair of Titanium Aero Structure with Cracks
Determination of Novel Brominated Flame Retardants in Flexible Polyurethane Foam by GC-MS
Affect of Brominated Flame Retardant on the Flexible Polyurethane Foam
Effect of Reinforcement Addition on Microstructure and Mechanical Properties of Al Matrix Composites
Preparation and Properties of Complex Antioxidants LDPE Antioxidant Film
Photo-Switchable Binding between a Photochromic Calix[4]Arene Derivative and Lanthanum Ions
Highly Efficient Photodegradation of MO Dye by TiO2 Nanoparticles
Preparation of Visible-Light Active Mn-Doped TiO2 Photocatalyst and its Photodegradation of Methylene Blue from Solution
Adsorption and Inhibitive Properties of 1-phenylaminomethyl-benzimidazole on Corrosion of Mild Steel in Hydrochloric Acid
Progress in Preparation of Nano-Sized Magnesium Hydroxide from Concentrated Seawater and Brine
The Network Prediction of Hot Temperature Flow Stress and Dynamic Recrystallization of AZ61 Alloy
The Finite Element Simulation of Thermal Deformation and Microstructure Evolution Forecast of AZ61 Alloy
Research Progress of Tungsten Nanorods and Nanoplatelets
A Method for Scale-Up of Grooved Nanofibers via Flat Off-Centered Core-Shell Structure Spinneret
The Preparation and Characterization of Polybenzoxazole Copolymerized with Multiwalled Carbon Nanotube via Direct Friedel-Crafts Acylation
Different Chemical Oxidant of Benzene Series Pollution Site Repair Effect
Design, Synthesis and Anticancer Activity of 4-Morpholinothieno[3,2-D]-Pyrimidine Derivatives Bearing Chromone Moiety
Vertical Flow Constructed Wetland Spherical Light Ceramsite Substrate Nitrogen Factor Research
Effect of Post-Weld Heat Treatment on Carbide Precipitation and Impact Properties of Coarse-Grained Heat-Affected Zone of Q690 Steel
Preparation of Polypropylene/Sisal Fiber Composites and Study on the Fiber Orientation
Mechanical Properties of Chopped Carbon Fiber Reinforced PBS/CF Composites
Study on Optimization of Degradation of Landfill Leachate by Electrochemical Oxidation Process with Response Surface Methodology
Experimental Research on Silicon-Based Composite Resistance Characteristic under Thermal Load
Electrical Simulation Experiment and the Analysis of Thermal Conductivity of Materials
Study on the Impact of DO and Organic Matter on Aerobic Granular Sludge Treating Municipal Sewage
Flame Retardancy Finishing on Wool Fabric via Sol-Gel Method
Minimum Particle Diameter of the Vanadium/Iron Co-Doped Nano TiO2 Transparent Hydrosol at Room Temperature
Design of the Portable Detector for Formaldehyde
Numerical Simulation of the Nanofluid Phase Separation by Lattice Boltzmann Method
The Emission Property of Phosphors LEDs Based on ZnCuInS/ZnSe/ZnS Quantum Dots
The Synthesis of Ionic Liquid Crystal Polymer and the Study of as Chromatographic Stationary Phase
Research on Properties of CB/EVA Semiconductive Shielding Composites
Hygrothermal Ageing Modeling and Numerical Testing of Unidirectional Polymeric Composites
Attenuation Characteristics of Ultrasonic Velocity and Acoustic-Based TC4 Alloy Uniformity Nondestructive Evaluation
Preparation and Application of Blocked & Crosslinked Waterborne Polyurethane Microemulsion as Paper Strengthening Agent
The Fatigue Life Prediction for EB-PVD Thermal Barrier Coating
Research on Performance Features of Shape Memory Alloys
Structural and Optical Properties of Al Co-Doped ZnCoO Thin Film
The Most Probable Mechanism Function of PVC Thermal Decomposition
Preparation of Polyacrylic Acid/Rice Straw Composite Superabsorbent and the Loading and Release Properties for Urea
Low-Temperature Catalytic Combustion of VOCs over MnOx–ZnO Mixed Oxides Supported on Cordierite Ceramic
Ionic Liquid [Bmim]OH Grafted Catalyst for Cycloaddition of Carbon Dioxide
The Molecular Orientation in Monomolecular Layer of Phthalocyanine and Porphyrin Derivatives
Research on Grinding Ti6Al4V Alloy with Inner-Lubricating Wheel
The Studies of ScB2 (0001) Surfaces from the First-Principles
Synthesis and Fluorescence Study of Cobalt(II) Deuteroporphyrin Dimethyl Ester
A Study of the Effect of Starch in Polymer Blends of Carboxymethyl Cellulose and Chitosan
A New Type Aluminum Alloy Backup Frame of FAST Project
Changes in Water Adsorption Desorption Isotherms of Cement Mortars Caused by Carbonation Coupled with Humidification-Drying Cycles
Research Progress of Sintered Wall Material Products Synchronous Cutting Machine
The Higher Order Crack Tip Fields for Anti-Plane Crack in Linear Functionally Graded Piezoelectric Materials
The Crack Tip Fields for Anti-Plane Interfacial Crack between Functionally Graded and Homogeneous Piezoelectric Materials
The Preparation and Detection of Quality Standard about Houttuynia Spray
Ethylene Oligomerization by Ni(II) Complex Based on Peptide
Synthesis of Nickel(II) Complexes and its Application to Ethylene Oligomerization
In Situ Formation of Insect Repellent Delivery System
Structure of Bridged Silsesquioxane Material Bearing a Pendant Dodecylamine
Hedgehog Buckyball: High-Symmetry Complete Polyhedral Oligomeric Silsesquioxanes (POSSs) Characterized by UV-MALDI-TOF Mass Spectrometry
Effect of Temperature on the Growth and Biochemical Composition of Sargassum muticum
Numerical Simulation of Cr12MoV Steel during Quenching Process
Effect of NH4Cl Flux on Structural and Luminescent Properties of CaS: Eu2+ Phosphors
Preparation and Properties of Multi-Elements Doped Perovskite-Type Mixed Conductors for IT-SOFC Cathodes
Research on Microstructure and Properties of Plasma Powder Spray Welding Layer Based on 3D Printing
The Bioactivity of Gradient Composite Bioceramic Coating with Two Kinds of Rare Earth Oxide Fabricated by Wide Band Laser Cladding
Discussions on the Pretreatment of the Air-Conditioning/Cotton Blended Fiber – The Application of Tea Saponin
Effect of Mixed Multiple Rare Earth Oxide on the Microstructure of Bioceramic Coating Prepared by Wide Band Laser Cladding
The Chemistry Model of Ion-Ion Interaction Energy of Full Ionized Hydrogen Plasma
Study on Catalyst for Catalytic Ozonation to Leachate and Catalytic Process
Carbon Nanotubes-Assisted Fabrication of TiO2 Nanocomposite Film for Optimum Elec
