Sonstiges, Englisch, Band Volumes 798-799, 816 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
Sonstiges, Englisch, Band Volumes 798-799, 816 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
ISBN: 978-3-03795-809-4
Verlag: Trans Tech Publications
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 125 papers are grouped as follows:
Chapter 1: Raw Materials,
Chapter 2: Powder Synthesis,
Chapter 3: Earthenware,
Chapter 4: Whiteware,
Chapter 5: Ceramic Tiles,
Chapter 6: Plaster and Cement,
Chapter 7: Refractories and Thermal Insulation, Chatper 8: Glasses, Glass-ceramics and Related Materials,
Chapter 9: Thermo-Mechanical Ceramics,
Chapter 10: Electrical, Electronic and Magnetic Ceramics,
Chapter 11: Nuclear, Optical and Chemical Ceramics,
Chapter 12: Bioceramics,
Chapter 13: Recycling and Environment,
Chapter 14: Processing,
Chapter 15: Nanotechnology,
Chapter 16: Other
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Characterization of a Limestone Powder Residue for Recycling as a Concrete Block IncorporationComparative Study of Organoclays with Ionic SurfactantStudy of a Clayey Soil Used in the Fabrication of Red Ceramics in Campos Dos Goytacazes, BrazilPurified Smectite Clays Organofilized with Ionic Surfactant for Use in Oil-Based Drilling FluidsImprovement of Rheological Properties of Little Noble Varieties from Boa Vista Bentonites - Part I: Experimental DesignCharacterization of Natural Slip Materials Geologically Found in the North of the State of Rio de Janeiro, BrazilReactive Formations: Characterization and Capacity ExpansionUse of Construction Waste to the Mass Manufacture of Clay ProductsBentonite Clays from Sossego, Paraiba, Brazil: Physical and Mineralogical CharacterizationInfluence of Hydrocycloning Pressure on the Purification of BentoniteSinthesys of Mullite Using Microwave Furnace from Kaolin and Alumina ResidueSilver-Doped Zirconia Nanoparticles as Possible Bactericide in Water FiltersInfluence of Oxidizing Atmosphere on Crystalline Phase Formation and Microstructural Properties of Mixed Cerium-Zinc Oxides Obtained by Polymeric Precursor MethodExperimental Planning of Mixtures to Obtain GeopolymerCharacterization of Al2(WO4)3 Synthesized by Co-Precipitation MethodLow Temperature Phase Transformation Study in the Al2O3-Y2O3-Nb2O5 SystemUse Residue of Bagasse Sugar Canein Synthesis of Molecular Sieve MCM-41Synthesis and Characterization of Molecular Sieve SBA-15 and Catalysts Co/SBA-15 and Ru/Co/SBA-15Influence of Clay Content and Surfactant on the Rheology of Non Aqueous Drilling FluidsSynthesis of Nanostructured PZT Ceramics with Powder Obtained from Coprecipitate MethodSBA-15 Molecular Sieve Using Clay as Silicon SourcesStudy of Organic Surfactant Sorption in Organophilic ClaysEvaluation of a Sodic Organoclay as Adsorbent for Removing Oil/Water in a Synthetic WastewaterInfluence of the Citric Acid and Metal Cation Ratio on the Structural and Morphological Characteristics of Aluminum Oxide Synthesized by Pechini MethodEffect of Calcination Temperature in the Aluminum Oxide Synthesized by Pechini Method in the Citric Acid: Metal Cation Ratio of 2:1Polycrystalline Tetragonal Zirconia of the Form ZrO2: 3 mol% Re2O3(Re-TZP) for Use in Oxygen Sensors: Synthesis, Characterization and Ionic ConductivitySintering Sr2MgWO6 Ceramic and their Reactivity to PetroleumMicrostructural and Colour Analysis of CuCrO2 Delafossite Obtained by Gelatin MethodSynthesis, Characterization and Ionic Conductivity of Fully Stabilized Zirconia Obtained from Core-Shell Type StructuresSynthesis and Characterization of Zirconium Oxide Systems with Yttrium Rich Rare Earth Concentrate AdditivesSynthesis of Gadolinium Doped Ceria Ceramic Powder by Polymeric Precursor Method (Pechini)Preparation of Mullite Whiskers from Powder of Topaz Pure and Doped with Rare EarthsEffect of LiF and CaO Additions on MgAl2O4 Dynamic BehaviorEffects of the Addition of Ions Barium on the Structural and Electrical Properties of PZT CeramicNanostructured Co3O4 Oxide for Low Temperature Ethanol OxidationEffect of the Iron Doping on the Thermal Decomposition of the Polymeric Precursor for the Titanium Dioxide Powder SynthesisMicrostructural Analysis of Clay Ceramic Added with Argillite and GrogStudy on the Viability of Using Drill Cuttings from the Potiguar Basin in the Production of Ceramic Products: Influence of Concentration and Firing TemperatureEffect of Banana Fiber in the Properties of Clayey CeramicAddition of Grog-Clay Ceramic Waste in Multiple Use MortarThe Incorporation of the Ceramic Industry Firewood Ash into Clayey CeramicBanana Aqueous Extract as a Potential Addition to Clay CeramicsMicrostuctural Evaluation of a Clay Ceramic Incorporated with Granite Rejects from Stone Sawing Using Diamond WireDegradation of Red Ceramic with Incorporated of Petroleum WasteRed Ceramic with Addition of Petroleum CokeResistance to Synthetic Seawater Aggression of Clay Ceramics Incorporated with an Ornamental Stone ResidueStudy of Ceramic Block Manufacture with the Addition of Waste from Iron Ore ExtractionThe Influence of Sintering Temperature on Ceramic Material with Addition of Mill ScaleTotal and Partial Replacement of Quartz in Aluminum Hydroxides Porcelain FormulationsStudy of the Effect of Feldspar Replacement from a Mixture of Glass / Syenite in Technological Properties of Ceramic CoatingsCharacterization of Ceramic Composite Waste of Granite, Marble and Caulim for Production of Coating PlatesAnalysis of Color of the Ceramic Coatings Submitted to Different Processing ConditionsCeramic Tiles with Photovoltaic PropertiesReuse of Waste from Polish in the Production of PorcelainPhases Obtained from Heat Treatment of Mn-Co-Based Coatings Deposited by Dip CoatingFormation of Spinel from Fe-Ni Coating Electrodeposited on AISI 430 Ferritic Stainless SteelMorphology and Fluidity of Spray-Dried Powder Transported by Compressed AirProcessing and Properties of Soil-Cement Blocks Incorporated with Natural GritTechnical Feasibility of Using Lightweight Concrete with Expanded Polystyrene in Civil ConstructionCharacterization and Granulometric Correction Soil for the Production of Soil-Cement Blocks for Two Method, Particle Size and X-Ray Florescence to be Inserted in Phase Change Materials (PCMS)Evaluation of Pozzolanic Activity of Siliceous Materials Using the Method of Variation of Conductivity in Lime SolutionProperties of Glass-Ceramics Obtained from Crystallization of the SiO2-Al2O3-MgO-Li2O System with Addition of ZrO2Study of Bubbles Elimination in Silica Glass Produced by Flame Fusion from Brazilian Natural Quartz PowderDevelopment and Characterization of the Al2O3-YAG Ceramic CompositesPreparation of Porous Zirconia-Yttria Ceramics by Thermal Removal of Potassium IodideSynthesis by Combustion Reaction of the System Zn0,6Fe0,4O for Application as DMS: Avaliation of the Type of ContainerMagnetic Study of Nanoferritas CoFe2O4 Obtained by Reaction of CombustionCharacterization of Yttrium-Doped Barium Zirconate Nanocrystalline Powder Prepared by Spray PyrolysisMicrostructure and Electrical Conductivity of Yttria-Stabilized Zirconia with Lithium AdditionCalcination Temperature Influence on Ionic Conductivity of Solid ElectrolytesMorphological Characterization by SEM, TEM and AFM of Nanoparticles and Functional Nanocomposites Based on Natural Rubber Filled with Oxide NanopowdersApplication of Design of Experiments to the Alkaline Treatment in Mordenite Zeolite: Influence on Si/Al RatioSynthesis and Characterization of Hydrated Calcium Phosphate: Precursors for Obtaining BiocementsSynthesis and Characterization of Calcium Phosphate from Fossilized Calcareous Shells for Biomedical ApplicationsMechanical Characterization of Tricalcium Phosphate Ceramics Doped with MagnesiumPreparation and Characterization of Hybrid Fe3O4/APTES for Immobilization of GOXEffect of the Mg2+ Substitution on the Sintering Behavior and Compressive Strength of Doped ?-TCP/CPP CeramicsTitanium Substrate Surfaces Coated with Hydroxyapatite by Magnetron SputteringA Study on Public Opinion of Structural Concrete Blocks Incorporated with Ornamental Stone ResidueIncorporation of Global Blast Furnace Sludge into Clayey CeramicCoarse Aggregates Obtained from Red Mud via Pelletizing ProcessIncorporation of Fired Ceramic Waste into Binary and Ternary Earth-Binder (S) Mixtures for Compressed BlocksEvaluation of Industrial Rejects of Mineral and Metallurgical Processing as Ceramic Synthetic ProppantsProperties of Clay Ceramic Incorporated with Red MudCharacterization of a Red Mud and a Clay Body for Ceramic FabricationModification of Sodium Bentonitic Clay Used in Zinc Ion AdsorptionInfluence of Firing Temperature on the Behavior of Clay Ceramics Incorporated with Elephant Grass AshEvaluation of Co and CO2 Emitted in the Firing of Clay Ceramics Incorporated with Elephant Grass AshUse of Ceramic Membrane for Indigo Separation in Effluent from Textile IndustryStudy of the Influence of Granite Residue in Different Compositions to Prepare Ceramic MembranesEnvironmental Durability of Soil-Cement Block Incorporated with Ornamental Stone WasteStudy of Mechanical Properties and Development of Concrete Using Sludge from Textile IndustryCharacterization of Spectrogel Organoclay Used to Adsorption of Petroleum DerivativesEvaluation of Agents Abrasives Polishing Porcelain Employing Image ProcessingEvaluation of the Reuse of Waste from the Polish Porcelain in the Development of Ceramic Products with Better Thermal ComfortInfluence of Waste Glass on the Physical Properties of Portland Cement ConcreteStudy and Characterization of Chocolate B Clay on Adsorption of Heavy Metals (Lead and Zinc) in Bath Finite SystemRecycling of Automotive Laminated Waste Glass in CeramicEvaluation of the Addition of Electric Arc Furnace Dust in Hot Metal Changind the Type of the CrucibleBottom Ash from Mineral Coal as Aggregatein Mixtures for Ceramic ProductsCharacterization of Converter Refractories for RecyclingCharacterization of BOF Dust for Pellets Production Used in Blast FurnaceProduction of Zeolite from Rice Husk AshPotential Evaluation of Gray Clay as Adsorbent of Heavy Metals Zinc (II) and Lead (II)Use of Glass Particles from Recovered LCD Screen Components as Fillers for Polyamide-6Reuse of ZrO2(Y2O3) Arising from Making Dental Implant - Characterization of MaterialsRelevance of Ornamental Stone Residues in the Manufacture of Concrete Blocks for Structural MasonryEvaluation of the Thermic Behavior of the Coal as a Byproduct through the Low Temperature Conversion Process ? LTC of the Sewage SludgeOrganic Binder Burnout in Alumina ProcessingStudy of the Interaction between Particles of Bentonite: Use of Dispersant AdditivesProcessing and Properties of Niobia-Doped Alumina Sintered at 1400oCPorosity and Delamination Defect Detection in Ceramic Materials by Active Infrared Thermography and Optical Digital MicroscopyEffect of Milling Medium on Alumina Additivated with NiobiaHybrid Membranes Development Made by Chitosan and Calcium PhosphateYttria Nettings by Replica ProcessingComparative Study of Solid-Phase and Liquid-Phase Assisted Sintering of Nb2O5-Doped AluminaInfluence of Addition of Polysiloxane on Sintering of Al2O3Synthesis of Strontium Titanate Nanoparticles by Ultrasonic IrradiationAnalysis of the Mechanical Behavior of Ceramic Filters of the Systems Al2O3-LZSA and Al2O3-SiCThe Influence of Microstructures of Ceramics on the Monitoring of Environmental HumidityCompaction of ZrO2(Y2O3) Powders with Different Particle Sizes and Effects on the SinteringRice Husk Ash Impregnated with Silver Nanoparticles for Water PurificationNanoparticles Prepared by Sol-Gel Method Used in Pseudoboehmite-Reinforced Nylon 6.12 NanocompositesEvaluation of the Influence of a Smectite Clay in PP CompositesEffect of the Addition of a Brazilian Sodium Smectite Clay in Toughened Nylon-6
