Sonstiges, Englisch, 5180 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, 5180 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-908453-55-0
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Compelling Global Issues in Science and Technology and the Role of Materials ScienceStrong Ferritic-Steel WeldsEffects of Alloying on Deformation Behavior of Low Carbon Steels in the Intercritical Temperature RangeMaterials Engineering for Solid Oxide Fuel Cell TechnologyOptimization of Nb HSLA Microstructure Using Advanced Thermomechanical Processing in a CSP PlantDevelopment of New Actuators for Flapping Wing FlightMicrostructural Design for Advanced Structural SteelsNew Materials and Construction Methods for Multi-Material-Design, Lightweight Construction and Modularity in Future Vehicle ConceptsCarbon, Nitrogen and Hydrogen in Steel: Similarities and Differences in their Effect on Structure and PropertiesMulti-Scale Numerical-Experimental Analysis of Failure in Solder AlloysDevelopments of Fuel Cell and Hydrogen Technology at NRC's Institute for Fuel Cell InnovationMicrostructural Evolution in the Processing of Bulk Samples Using High-Pressure TorsionMicrostructure and Texture of Zirconium and Titanium Grain Refined by Equal Channel Angular PressingSyntheses and Applications of Fe-, Co-, Ni- and Cu-Based Bulk Glassy AlloysThe Strain Dependence of Post-Deformation Softening during the Hot Compression of 304H Stainless SteelDevelopment of a Magnesium Recycling Alloy Based on AM50Current Research Activities on High Nitrogen Steel in JapanMicrostructure and Mechanical Properties of Twin-Roll Strip Cast Mg AlloysStrength and Fracture of Aluminium AlloysManufacturing and Oxidation Behavior of Silicide-Based Nanocomposite Coatings on Refractory Metals by Displacement ReactionMechanical Properties of a Spray-Cast Aluminum Alloy Processed by Severe Plastic DeformationChanges in Lattice Constants and Orientation of and Grains in Nanocrystalline Ni and Ni-Fe Electrodeposits after AnnealingFormation of (Ferrite+Cementite) Microduplex Structure by Warm Deformation in High Carbon SteelsLaparoscopic Surgical Manipulations Affect the Mechanical Properties and the Microstructure of Polymeric SuturesDevelopment of Aluminium Alloys with Ultimate Recrystallisation ResistanceMultifunctional Ti-Si-B-C-N Tribological Nanocomposite Coatings for Aerospace ApplicationsComputational Welding Mechanics and Concept of Inherent Strain for Industrial ApplicationsFabrication of Lotus-Type Porous Metals by Continuous Zone Melting and Continuous Casting TechniquesRecent Research and Development in Metallic Materials for Biomedical, Dental and Healthcare Products ApplicationsOn the Size of Representative Volume Element in Elastic, Plastic, Thermoelastic and Permeable Random MicrostructuresUnderstanding Process and Property Relationships in Aluminum Alloy Friction Stir WeldsThe c/a Ratio in Quenched Fe-C and Fe-N Steels - A Heuristic StoryHigh Temperature Oxidation of Steel; New Description of Structure and Properties of OxideEffect of Dislocation Distribution on the Yielding of Highly Dislocated IronA Neutron Scattering Study on Microstructure and Deformation Behavior in Nitrogen Bearing Austenitic SteelsThermal Applications of Cellular Lattice StructuresCurrent Status and Next Generation Advances in Fuel Cell Research and DevelopmentCreep Data Rationalization for Power Plant SteelsResearch and Development of Inconel 718 Type SuperalloyDeformation Mechanisms of Nanocrystalline MaterialsSolute and Second Phase Evolution during Industrial Processing of AA3103Application of Local Tomography Technique to High-Resolution Synchrotron X-Ray ImagingChange of Young's Modulus of Cold-Deformed Aluminum AA 1050 and of AA 2024 (T65): A Comparative StudyThe Effect of Chemistry and Cooling Rate on the Latent Heat Released during the Solidification of the 3XX Series of Aluminum AlloysBehavior of Hydrogen in Al-4%Mg Alloys during Heat TreatmentPhase Transformation for Primary Particles in the Surface Regions of an AA1200 AlloyTailoring the Mechanical Properties of Al-Sn-Alloys for Tribological ApplicationsNew Application of Electromagnetic Vibration Process for Creation of High Potential Metallic MaterialsThe Effect of Electromagnetic Vibration on the Structure Control of A356 AlloyIncrease of Lankford Value of Al-Mg-Si Sheets for Automotive Panel Produced by Asymmetric Warm RollingMethodology for Automatic Control of Automotive Al-Si Cast ComponentsReversion Treatment to Improve Bake Hardening Response of a Twin-Roll Cast 6016 Automotive SheetNew Analyses of Pressure Filtration Curves of Al Alloys: A Case StudySuperplastic Properties of a Newly Developed Al-Mg-High Mn Aluminum Alloy SheetIn-Situ SEM/EBSP Analysis during Annealing in a Pure Aluminum Foil for CapacitorDamage Mechanisms of 5A06 Al Alloy Weld Joints under Constant Load and Thermal Cycling ConditionProjection of Extrusion Force of Spray-Formed Al-25wt%Si with High Temperature CompressionEffect of Fe Content on Hot Tearing of High-Strength Al-Mg-Si AlloyModelling Dispersoid Precipitation in Scandium Containing Aluminium AlloysAlloying with Silicon and Copper in Aluminum AlloysA Study of Bubble Entrainment as Related to Runner Velocity in Aluminum Sand Castings Using the Cosworth ProcessSurface Treatment of Aluminum Alloy with Laser Irradition to Increase Wear ResistanceEvaluation of Friction Spot Joining Weldability of Al Alloys for AutomotiveAtomic Bonding of Precipitate and Properties of Al-Cu-Mg AlloyRobust Trimming of Automotive PanelsUltrasonic Leak Test for Automotive Brake CaliperInfluence of Vacancy Formation and Mg Migration on Cracking in Spot Welding AA5754 AlloysAgeing Characteristics and Microstructural Evolution in Microalloyed Al AlloysMicrostructural Aspects by Electron Microscopy Observed in Al-Mg Based Alloys after Special P/M ProcessesMicrosegregation Effect of Copper in Solidification of A356 AlloyControl of the Alloying Element Distribution in Al-Alloys by High Magnetic FieldsThe Influence of 0.1% Sc Addition on the Microstructure and Texture Development in Al-Zn-Mg-Cu-Zr AlloysSubstructures and Fatigue Crack Growth in HIPing and Semi-Liquid Die Casting A356 AlloysBehavior Analysis of Environmental Hydrogen in High-Magnesium Al-Mg Alloys by Hydrogen Microprint TechniqueEffect of Mn Addition on the Mechanical Properties in Al-Cu-Li-Mg-Ag-Zr AlloysStructure and Properties of AlMg3 Alloy with Sc and ZrStructure Development during ECAP and Subsequent Creep of AluminiumThe Continuous Elimination of Inclusions in Molten Aluminum by Direct and Alternate Electromagnetic ForceNanostructured Shape Memory Alloys for Biomedical ApplicationsNanotechnology: Better Materials for All ImplantsCellular Activity and Biomaterial's Surface TopographyA Prototype Continuous Flow Polymerase Chain Reaction LTCC DevicePlasma and Electrospray Deposition to Improve the Biocompatibility of StentsAn Injectable Biomaterial for Bone RepairEvaluating the In Vitro and In Vivo Efficacy of Nano-Dimensional Polymeric Scaffolds for Bladder Tissue Replacement ApplicationsSoft Tissue Ingrowth in Metal Rods with Varying Surface Textures and its Clinical SignificanceBiofunctional Materials for Nerve RegenerationCalcium Phosphate Films Coated on Titanium by RF Magnetron Sputtering for Medical ApplicationsMechanical Properties and Microstructures of Beta-Type Titanium Alloy for Biomedical ApplicationsBiofunctional Hybrid of Titanium with PolymersGamma-Poly(glutamic acid)/Chitosan Composite Scaffolds for Tissue Engineering ApplicationsDegradation Studies of Some Polymeric Biomaterials: Polypropylene (PP) and Polyvinylidene Difluoride (PVDF)Chitosan Polyelectrolyte Complexes for Use in Tissue Engineering and Drug DeliveryMechanical Characterization of Hydroxyapatite-Based, Organic-Inorganic CompositesSpontaneous and Biomimetic Apatite Formation on Pure MagnesiumElectrostatic Nanomechanics of Cantilever BiosensorsThe Remineralizing Effect of Carbonate-Hydroxyapatite Nanocrystals on DentineTribological Characterization of Surface Treated Titanium for Orthopaedic JointsInvestigation of the Hydroxyapatite Crystallites in Bone at the Interface with Implant by Neutron DiffractionPreparation of Poly(Lactic Acid) Composites Containing Vaterite for Bone RepairAgeing Studies of Plasma Deposited Organic Films by Surface Chemical Analysis (ESCA, ToF-SIMS, XAS)Common Features on Damage Mechanisms Identified on Various Metal and Ceramic on Polyethylene Articulating Surfaces of Total Hip ProsthesesMechanical Properties and Biocompatibility of Porous Titanium Prepared by Powder SinteringReceptor-Mediated Gene Delivery Using Chitosan Derivatives In Vitro and In VivoMicrostructures and Mechanical Properties of Biologically-Inspired Ti-Nb Based Alloys with Ternary Element AdditionsCalcium Phosphate Precipitation by Galvanic Current between Titanium and Gold in Pseudo-Body FluidPreparation and Characterization of Octyl Methoxy Cinnamate (OMC; 2-Ethylhexyl-p-Methoxy Cinnamate)-Trapped Mesoporous Silica Using LecithinDifferent Processing Methods to Obtain Porous Structure in Shape Memory PolymersCarbon Nanotubes Grown by Catalytic CVD on Silicon Based Substrates for Electronics ApplicationsVariation in Bone Quality during Regenerative ProcessFretting Fatigue Studies of Surface Modified Biomedical Titanium AlloysFormation and In Vitro and In Vivo Evaluation of Surface Modified Implants by HAp, Carbonated-HAp and Titanium OxideU.S. FDA Perspective on the Regulation of Cyanoacrylate Polymer Tissue Adhesives in Clinical ApplicationsTrivalent and Hexavalent Chromium Issues in Medical ImplantsCell Interactions with PDMS Surfaces Modified with Cell Adhesion Peptides Using a Generic MethodIn Vivo and In Vitro Evaluation of Coated HAp Films with Different Surface MorphologyAlignment of HAp Crystal Using a Sample Rotation in a Static Magnetic FieldPorous Titanium with Porosity Gradients for Biomedical ApplicationsEffects of TiN Film Coating on the Electrochemical Behaviors of Dental Implant Screw SurfaceEffect of Calcium Phosphate Glass on Proliferation and Differentiation of MG-63 Cells in HA ScaffoldsInfluence of Applied Tensile and Bending Strains on Local and Overall Critical Current of Multifilamentary Bi2223-Composite SuperconductorHigh Temperature Deformation Behavior and Microstructure Change in Nano Grain CompositesCorrosive-Erosive Wear Studies of Al6061/Albite CompositesMechanical Properties of Composite Materials Consisting of M3/2 High Speed Steel Reinforced with Niobium CarbidesDevelopment of New Low Cost Discontinuously Reinforced Titanium Composites for Commercial ApplicationsLow Pressure Infiltration of Molten Aluminum Alloy to Metal Fiber PreformImportance of Composite Design for the Microstructure of Bundle Drawned Multifilamentary Nb3Sn WiresSLEEM Study of MgAl2O4 at Interface betweeen Al2O3 and Matrix in Al2O3/Al Alloy Composite MaterialsReducing Threshold Pressure for Infiltration of Al-12Si Alloys into Carbon Particle Compacts by Placing a Thin Layer of Sn at the Infiltration FrontProcessing Ti-Al-Nb Composite Sheet Materials Using Cold Roll Bonding and Reaction AnnealingEvaluation of Wear Behavior of Feldspar Particles Reinforced Copper Alloy Composite MaterialsDevelopment of High Strength Mo2NiB2 Ternary Boride Base Cermets Produced by Reaction Boronizing SinteringCombustion Synthesis of TiB2 Particle Dispersed Metal Matrix CompositesPlasticity Mechanisms in Multi-Scale Copper-Based Nanocomposite WiresPhase Transformation and its Effect on Dry Sliding Wear of Electro-Pressure Sintered Cobalt and Cobalt-Base CompositesEffect of Milling Condition on Properties and Microstructure of Copper Reinforced with 1% vol. NbCLaser Zone-Remelted Alumina-Based Eutectic In Situ CompositeCrystal Structure of the ?'-Phase in Al-Mg-Si-Ag AlloyPolymer Nanocomposites as Candidates for Tribological ApplicationsAnalysis of Fine Stress Fields in Metal Matrix Composites Using HOLZ PatternsMechanically Alloyed P/M Composites of Al-Mg-Silicide and Al-Mg-Oxide SystemsSynthesis of Carbon Nanotube-Reinforced Al Matrix CompositesFabrication and Corrosion Properties of Iron Aluminum Alloy/Steel Laminated Composite Prepared by Clad RollingFabrication and High Temperature Creep Behavior of In Situ Synthesized (TiB+TiC)/Ti CompositesWettability of Basal and Prismatic Plane of Graphite by Molten Aluminum-Magnesium AlloyFabrication of Nano-Laminar Glass/Metal Composites by Sintering Glass FlakesEstimation of Critical Composition for the Transition from Brittle to Ductile in W-Cu CompositesStructure and Properties of PM Composite Materials Based on EN AW-AlCu4Mg1(A) Aluminium Alloy Reinforced with the Ti(C,N) ParticlesBend and Shear Tests: Suitable Methods for Mechanical Characterization of Laminated Composite MaterialsBinder-Free Tungsten Carbide Fabricated by Pulsed Current SinteringStudy of Environmental Corrosion Behavior and Mechanism of the Carbon/Epoxy CompositeEffects of Spatial Distribution of Defects on Bending Deformation and Critical Current in Bi2223/Ag Superconducting Composite TapesMechanical Properties of the MG-Based Amorphous/Nano Zirconia Composite AlloyProduction of MMCs on the Basis of Fibres Coated with the Metal Alloy by Magnetron SputteringStacking Faults and Growth Mechanism of In Situ TiB Whiskers and Interface Structures in SPSed TiB/Ti(FeMo) CompositesHigh Performance Soft Magnetic Composite (SMC) Produced by Improved ProcessSynthesis and Characterization of Exfoliated Natural Mica/Polymer NanocompositesA Novel Forming Process of Copper Cladding Aluminum Composite Materials with Core-Filling Continuous CastingThe Effect of Boron on the Hardness and Fracture Toughness of WC-FeAl-B and WC-Ni3Al-B CompositesEmbossing on Epoxy Thermoset Polymer Using SiO2 Coated Nickel TemplateAn Analysis on the Tensile Strength of Hybridized Reinforcement Filament Yarns by Commingling ProcessAn Assessment of Mechanical Properties of Geo-Grid Reinforced Material and its ApplicabilityCreep Properties of Alborex Reinforced AZ31 Matrix Mg Composites Containing AgA Study on the Chemical Resistance of GT CompositesMicroscopic Evaluation of Commingling-Hybrid YarnsInternal Friction and Young's Modulus of 9Al2O3 2B2O3 Whisker Reinforced Aluminum Matrix CompositeNovel Processing of Porous Titanium Composite for Producing Open Cell StructureTitanium Carbide Particulate Reinforced Titanium Based Composite by In Situ ProcessEffect of Vacuum Infiltration Boehmite Gel on Tribological Behavior of Friction MaterialsParticle Size Effects on Complex Permeability and Electromagnetic Wave Absorption Properties of Amorphous Alloy-Epoxy CompositesNovel Separation Technique of Particle Reinforced Metal Matrix Composites by Fused Deposition MethodMechanical Properties of Porous Titanium Compacts Reinforced by UHMWPEEffects of Fillers on Electrical Properties of PTFE Composites for Circuit BreakerAn Experimental Study on the Frictional Property and Long-Term Performance of GT/HDPE CompositesPreparation of SiC/MoSi2 Composites by Mechanical Alloying and its Fracture PropertiesEffect of Al Content on Corrosion Resistance of (Ti1-xAlx)N Coatings under NaCl Deposit in Wet Oxygen at 600?CEnhancement of TBC (Thermal Barrier Coatings) Characteristics by Gas Tunnel Type Plasma SprayingLocal Approach to Thermally-Sprayed Coating/Substrate Adhesion through LASAT (Laser Shock Adhesion Test)Self-Lubrication and Wear Behavior of TiC/a-C:H Nanocomposite CoatingsGrain Refinement of Metal Surface Using Hot Shot PeeningAdhesion Study of Cold-Sprayed CoNiCrAlY-Mo Coating of Inconel 625 Using the Laser Shock Adhesion Test (LASAT)Recrystallization in NiCoCrAlY Coated DS Nickel Base Superalloys during Thermal AgingFabrication Routes of Microsized Electrochemical Biosensors Based on Single-Walled Carbon NanotubesInterface Microstructure and Adhesion of Zinc Coatings on TRIP SteelsEvaluation with Surface Analysis Equipment, of Casting Defects in Cast Iron Articles (review)Laser Shock Processing as a Method for the Improvement of Metallic Materials Surface Properties: A Discussion on the Influence of Combined Mechanical and Thermal EffectsElecrochemical Performance of LiNi1/3Co1/3Mn1/3O2 with Al2O3 Nano-Particle CoatingPlasma Spray Deposition of Hydroxyapatite Coatings from Sol PrecursorsIn Situ and Ex Situ Investigation of the Spallation of Thermally Grown OxidesSurface Modification of Steel Using Liquid Jet Peening (Fatigue Performance)High Temperature Oxidation Resistance of Two Ni(Co)CrAlYSi(Hf) Overlay CoatingsEffect of Laser Surface Treatment on Microstructure and Properties of MRI 230D Mg AlloyCutting Properties of PVD and CVD Coated A2lO 3 + TiC Tool CeramicCorrelation of Microstructure with Hardness and Corrosion Resistance of Surface Alloyed Materials Fabricated with Fe-Based Metamorphic Powders by Accelerated Electron Beam Irradiation MethodNumerical Simulation of Thermal History in a Novel Spray Forming ProcessModelling of Nitrogen Deposition Pressure Effect on Grain Size Development and Mechanical Properties of Nanocrystalline Ternary Nitride CoatingsProspective Applications of Gas-Eutectic Porous Materials (Gasars) in USANovel High Temperature-Oxidation-Resistant Nanocomposites Developed by Nanocomposite ElectrodepositionDeposition of Multi-Functional Coatings by Physical Vapour DepositionHigh-Temperature Tribological Properties of Barite-Type-Sulfate-Coated Substrates with Different Isoelectric PointsMicrostructural Evolution of Durable Thermal Barrier Coatings with Hf and/or Y Modified CMSX-4TM Superalloy SubstratesThe Effects of Process Parameters on Mechanical Property and Visual Aspect of Plasma Sprayed Y2O3 CoatingMicrostructure Characterization and Modeling of Splat Formation during Air Plasma Spraying for Inconel 625 SuperalloyMechanical and Electrochemical Properties of Plasma Electrolytic Oxide Coatings on Magnesium AlloysCharacteristics of Gallium Oxide Nanowires Synthesized by the Metalorganic Chemical Vapor DepositionFormation and Characteristic of Room Temperature Electrolytic Sulfidized Coating on Hard Steel SubstratePrediction of Softening of High Speed Steel with Surface Nitriding for Hot ForgingSurface Modification Technique Using Interfacial Reaction between Ti-Al Alloy and SteelElectrodeposition of Metallic Nanowires in Nanoporous Polycarbonate FilmsAnalysis on the Microstructure of Ceramic Coating Layer Fabricated by Plasma Electrolytic OxidationImprovement in Wear Resistance of Nano WC-Co Coatings Fabricated by Detonation Gun SprayingCorrosion Characteristics of TiN and ZrN Coated Ti-Nb Alloy by RF-SputteringZn-Al-Mg Coatings: Thermodynamic Analysis and Microstructure Related PropertiesMicrostructural Features of Plasma Nitrided Molybdenum Alloy SteelComparison with Physics and Chemical Property of SBS/AA Copolymer Using Thermal Polymerization and UV Graft-Polymerization MethodsThe Influence of Powder Types and Plasma Spray Conditions on Abrasive Wear of Nanostructured and Conventional Al2O3/TiO2 CoatingsLifetime of PEMFCsSolid Oxide Fuel Cell (SOFC) Development in DenmarkManufacturing of Solid Oxide Fuel Cells - Bridging the Gap from Laboratory to IndustryFuell Cell and Hydrogen Vehicles - State of the Art and Challenges for Improved MaterialsProton Exchange Membrane Development and Processing for Fuel Cell ApplicationSuspension Plasma Spraying of Intermediate Temperature SOFC Components Using an Axial Injection DC TorchShort Stack Performance of Intermediate Temperature - Operating Solid Oxide Fuel Cells with Hydrocarbon Fuel ProcessorPulsed Laser Deposition of Sm0.2Ce0.8O1.9/Zr0.9Sc0.1O2 Bilayer Films for Fuel Cell ApplicationNi-Fe Bimetallic Anode for Intermediate Temperature Solid Oxide Fuel Cells Using LaGaO3 Based Oxide ElectrolyteSolid - Phase Synthesis of Carbon Nanoparticles and their Application to Direct Methanol Fuel CellPreparation of High Surface Area La0.1Ca0.9MnO3 and its Electrochemical ActivitiesProcessing and Properties of Advanced Solid Oxide Fuel CellsSynthesis and Sintering Behavior of Nano Crystalline Gd-Doped CeriaDevelopment of Zirconium Based Non-Platinum Cathode for Polymer Electrolyte Fuel CellPlasma Spray Processing of Solid Oxide Fuel CellsA Study on Co and Cu Oxides as Sintering Aids for Sm0.2Ce0.8O1.9 ElectrolyteA Mathematical Model of Ultra-Thin Catalyst Layer in PEFCDevelopment and Demonstration of Membrane Reformer System for Highly-Efficient Hydrogen Production from Natural GasFirst-Principle Molecular-Dynamics Study of Hydrogen and Aluminium Nanowires in Carbon NanotubesSintering of Mixed-Conducting Composites for Hydrogen Membranes from Nanoscale Co-Synthesized PowdersMechanical Strength and Interface Adhesion of a Solid Oxide Fuel Cell with Doped Ceria ElectrolyteStudies on Suppression of Hydrogen Evolution Reaction for Zinc/Air Fuel CellThe Development of the Composite Materials for the Bipolar Plate of the Fuel CellDesign of Micro-Structure at Atom Level in Dy Doped CeO2 Solid Electrolytes for Fuel Cell ApplicationsNeutron Incoherent Scattering Measurements on Hydrogen-Charged Zircaloy-4Beneficial Effects of Boron Addition into ?-TiAl AlloysIdentification of the Chirality and Polarity of Intermetallic Compounds with the Point Groups of 23, 432, 422, and 321 by Electron DiffractionVacuum Induction Melting and Investment Casting Technologies Tailored to Near-Gamma TiAl AlloysProcessing and Mechanical Properties of RuAl-Based AlloysAnalysis of the Solidification Microstructure of Multi- Component ?-TiAl AlloysA Numerical Model for the Description of Massive and Lamellar Microstructure Formation in Gamma-TiAlCold-Working and Annealing of L10-Ordering Iron-Palladium Base IntermetallicsMicrostructures and Mechanical Properties of Directionally Solidified Intermetallic CompositesEffects of Hf on the Microstructure and Mechanical Properties of TiAl Base AlloysMicrostructural Control of Nb-Si Alloy with Invariant ReactionsTexture Memory Effect in Heavily Cold-Rolled Ni3Al Single CrystalsA Study of Recrystallization and Phase Transitions in Intermetallic Titanium Aluminides by In Situ High-Energy X-Ray DiffractionInfluence of Step Aging on Creep Behavior and Microstructural Evolution of Fine-Grained Fully Lamellar XD TiAl AlloysHigh Temperature Deformation Behavior of Beta-Gamma TiAl AlloyProcessing of Gamma-Based TiAl Alloys by Torsional DeformationMicrostructure and Creep of ?-TiAl Containing ?-StabilizerTensile Properties and Creep Behavior of Compositional Modified Orthorhombic Ti2AlNb AlloysInfluence of Mechanical Surface Treatments on the Fatigue Performance of the Gamma TiAl Alloy Ti-45Al-9Nb-0.2CThermo-Mechanical Fatigue Behaviour of the Gamma-Titanium Aluminide TNB-V5 with Near-Gamma MicrostructureMicrostructure and Hardness of Scandium Trialuminide with Ternary Rare-Earth AdditionsDeformation and Fracture Analysis of a Duplex ?-TiAl Alloy during Low Cycle FatigueEffects of Minor Yttrium Addition on Microstructure, Mechanical Properties and Hot Workability of Nb or V Containing TiAl AlloysIntergranular and Pitting Corrosion Behavior of Fe-25Al-6Cr Intermetallic Compounds Containing Mo, Nb and BHigh Temperature Strength of Ni-Al-Cr Based Alloys Containing Refractory Elements for Advanced Die MaterialsGrain Boundary Precipitation and Tensile Ductility of Fe-Mn-Ni AlloysBrazing of AZ31B Magnesium Alloy SheetObservations on the Thermal Response and Mold Filling Behavior of an AZ91E Magnesium Alloy Cast by the Lost Foam Casting ProcessEnhancement of Press Formability of Rolled Mg Alloy Sheet by Using Cross Rolling ProcessesNew Phases in the Mg-Al-Sr SystemCyclic Deformation Behaviour and Potential Automobile Application of Magnesium Die Casting Alloys AZ91 and AM50Effect of Initial Grain Size and Strain Path on Grain Refinement in Magnesium Alloy AZ31Mechanical Joining of Magnesium Components by Means of Inductive Heating - Realization and CapabilitySelected Aspects of Semisolid Forming Magnesium AlloysProperties of AZ31 and AZ91 Sheets Made by Twin Roll CastingSuperior Corrosion Resistance and Mechanical Properties of a Mg Alloy Recycled by Solid-State ProcessEffect of RE Elements and Ni Contents on the Microstructure and Mechanical Properties of Rapidly Solidified Mg RibbonsMechanism of Crack Nucleation Analysed by In Situ Observation on Mg-Al-Zn AlloyThe Influence of Rolling Parameters on Microstructure and Mechanical Properties of the As-Rolled AZ31 Magnesium Alloy SheetCorrosion Properties of Supersaturated Magnesium Alloy SystemsMechanical Properties and Damping Behavior of Magnesium Alloys Processed by Equal Channel Angular PressingDevelopment of Conductive Anodic Oxidation Coatings on AZ91D Magnesium AlloyEffects of Tool Radius on Formability during Forging of AZ80 Magnesium Alloy WheelDevelopment of a High Strength Mg-Zn-Y-Zr Wrought AlloyInfluence of Misch Metal Addition and Deformation Processes on Microstructure and Mechanical Properties in AZ61 AlloyTexture Evolution during Uniaxial Compression of Hot-Rolled AZ31 Mg AlloyInvestigation and Application of Excellent Performance Mg Rare Earth Alloys as a Structural MaterialThe Effect of Twinning on Strain Rate Sensitivity during the Compression of Extruded Magnesium Alloy AZ31Effect of Solidification Grain Refinement on the Development of Wrought Mg AlloysEvolution of Microstructures during Laser Surface Cladding of Magnesium Alloy Castings Using Welding WireLinking Meso- and Macroscale Simulations: Crystal Plasticity of hcp Metals and Plastic PotentialsMicrostructure and Mechanical Properties of Mg Alloy Sheets Produced by Twin Roll CasterPress Forging of Magnesium Alloy AZ31 SheetsEffects of Differential Speed Rolling on Microstructure and Mechanical Properties of AZ31 Magnesium AlloyInfluence of Microstructural Change on Damping Capacity of Mg-X%Li AlloysHRTEM Observation of the Precipitates in Heat-Resistant Mg-Gd-Y-Zr AlloyEffects of Zn and Sn Additions on the Mechanical Properties of Mg-3%Al AlloyMicrostructure and Texture Evolution during Large Strain Hot Rolling of AZ31 Mg AlloyMicrostructural Characteristics and Creep Properties of Mg-5Al-2Si Alloys Modified with Sn and SrEffect of Aluminum on the Microstructural Characteristics and High Temperature Properties of Mg-xAl-Zn AlloysMethod for Horizontal Continuous Casting of AZ31B SlabHydrogenation and Degradation Behaviors of Mg-Ni AlloysEvolution of Microstructure of Magnesium Alloy AZ91D Solidified with Low-Voltage Electric Current PulsesMicrostructure Evolution of AZ31 Magnesium Alloy during Warm Compression FormingThe Microstructure of AZ 31 Magnesium Alloy by Forward Extrusion with Various Extrusion ParametersIntegral Foam Molding - A New Process for Foamed Magnesium CastingsPreparation and Characterisation of Open-Cell Microporous NickelProcessing of Closed-Cell Magnesium FoamsMetal Foam Production Process Using Hydro-Gel and its ImprovementDevelopment of Metal Foam for Application of Automotive PartMicromechanical Models of Metallic Sponges with Hollow StrutsMechanical Response of Porous Copper Manufactured by Lost Carbonate Sintering ProcessNew Composite Metal Foams under Compressive Cyclic LoadingsUniaxial Elasto-Plastic Behaviour of Adhesively Bonded Hollow Sphere Structures (HHS): Numerical Simulations and ExperimentsCellular Structures under Impact LoadingOn the Finite Element Simulation of Secondary Operations on Metallic Foamsinno.zellmet - A Concerted Approach towards the Application of Non-Foam Type Cellular MetalsFabrication of Lotus-Type Porous Copper-Aluminum Alloy by Unidirectional Solidification in Hydrogen AtmosphereDensity-Graded Aluminum Foams by the Corrosion MethodComputational Relationship of Deformation Behavior and Materials Strength of Amorphous Alloys to Short-Ranged Local StructuresCrystallization Behavior of Al87Ni5La7Zr1 Metallic GlassSoft Magnetic Bulk Glassy Alloy Synthesized by Flux Melting and Water QuenchingThermal and Mechanical Properties of Mg-Cu(Ni)-Y(Gd) Amorphous AlloysElastic Properties of Cu-Based Bulk Metallic Glass around Glass Transition TemperatureMetastable Transition-Metal System Bulk Alloys Prepared by MA and Shock CompressionPlastic Deformation Behavior of Bulk Metallic Glass Composite Containing Spherical Ductile Crystalline PrecipitatesFemtosecond Laser Ablation of Zr55Al10Ni5Cu30 Bulk Metallic GlassEXAFS Study on Atomic Distribution Change during Tensile Deformation of Metallic GlassLocal Structures around Zr, Ni and Cu for the Zr67Cu33 and Zr67Ni33 Metallic GlassesThermal Stability and Nanocrystallization of Amorphous Ti-Ni Alloys Prepared by Cold Rolling and Post-Deformation AnnealingGlass Structure Control of Zr-TM-Al (TM: Cu, Ni and Co) BGAs with Small Additive ElementsMetastable Solids from Undercooled MeltsX-Ray Study of Pd40Cu30Ni10P20 Bulk Metallic Glass Brazing Filler for Ti-6Al-7Nb AlloyAnalysis of Optimal Compositions of Ternary Bulk Metallic Glasses with Thermodynamic QuantitiesAtomistic Analysis of Unstable Deformation in Amorphous MetalEffects of Additional Elements on Microstructures of Zr-Based Metallic Glass RibbonsAnomalous SWAXS Analysis of Zr-Cu-Ni-Al Quaternary Metallic Glass JointsStructure of Glass and Liquid Studied with a Conical Nozzle Levitation and Diffraction TechniqueGlass Formation Range of Mg-Based Bulk Metallic AlloysPlasticity in Bulk Metallic Glass Composites Containing Dual Amorphous PhasesIcosahedral Order in Supercooled Liquids and Glassy AlloysMechanical Properties of an Amorphous or Partially Crystallized Zirconium Based Metallic GlassGrowth and Atomistic Structure Study of Disordered SiGe Mixed SemiconductorsElectronic Structure and Phase Stability of Glassy AlloysRoom Temperature Plasticity of Zr65Al7.5Ni10Cu17.5-xPdx Bulk Metallic GlassesRelaxation Kinetics of Bulk Metallic Glasses below Glass Transition TemperatureAnalysis on the Phase Transition Behavior of Bulk Metallic Glass by Electrical Resistivity MeasurementViscosity Measurements of Zr55Cu30Al10Ni5 Supercooled Liquid Alloy under High-Speed Heating ConditionsChange of Nanostructure in (Fe0.5Co0.5)72B20Si4Nb4 Metallic Glass on AnnealingFormation, Mechanical and Magnetic Properties of (Fe,Co)-B-Si-Nb Bulk Glassy AlloysSuperplastic Nanoforging of Pt-Based Metallic Glass with Dies of Zr-BMG and Glassy Carbon Fabricated by Focused Ion BeamLocalized Shear Deformation and Fracture in a Zr-Based Bulk Metallic GlassStructure Instability of Metallic Glass Zr50Cu40Al10 in Low TemperatureGlass Forming and Thermal Properties of the Mg65Cu25GD10-xNdx (x=0~10) Amorphous AlloysHigh Temperature Deformation Characteristics of Zr76.11Ti4.20Cu4.51Ni3.16Be1.49Nb10.53 Bulk Metallic Glass CompositeOxidation Behavior of the Y56Al24Co20 Bulk Amorphous Alloy Containing Crystalline Composites at 325-450?CDevelopment of a Method for Making Interatomic Potential: An Application to Metallic SystemsEstimation of Micro-Formability and FEM Simulation of Micro-Forming Process of a Zr-Based Bulk Metallic GlassIntergranular Fatigue Cracking Enhanced by Impurity SegregationNumerical Analysis of Test Methods for Evaluating Shear Strength of Ceramic Composite Joints Using Interface ElementEffect of Dispersion of Coherent and Incoherent Precipitates on High-Temperature Deformation of CopperApplication of Local Approach to Hydrogen Embrittlement Fracture Evaluation of High Strength SteelsStress Corrosion Cracking Failure of Jackbolts for Die Casting PressSimulation of Ductile Damage in Two-Phase Structural Steel with Meso-Scale ModelFracture Assessment of Wide Plate Component Subjected to Biaxial LoadingDuctile Crack Propagation Characteristics in Steel Thin Single Edge Notched Tension SpecimensPrediction of Ductile Crack Growth from Ductility of SteelDynamic Evaluation of Strength-Structure Properties by the Determination of Activation Volume and Mean Slip DistanceMicrostructure and Mechanical Properties of Commercial Purity Copper Resulting from Repeated Groove Pressing Followed by Cold RollingEffect of Strength Matching on Ductile Fracture Behavior of X80 Linepipe Girth Welds Subjected to Tensile LoadingEvaluation of Mechanical and Fracture Characteristics Using Instrumented Indentation TechniqueInvestigations on Structure and High Temperature Properties of IridiumMicrostructure Analysis of Cold Worked HolesStrain Scanning in Australia: Instrumentation and Recent ExperimentsTemperature Distribution, Phase Transformations and Residual Stresses in Heat Treatment of Grinding BallsEffects of Applied Bias and Dopants on the Photocatalytic Degradation of Aqueous Dye Solution by TiO2/Ti ElectrodePhysical Simulation of Thermo Mechanical Phenomena to Obtain an Optimal Micro Structure for a Soft Magnetic Fe-Co-AlloyThe Developments of Plasticity Processing: 3M StrategyEffect of Dispersoids on Softening Behavior in Cu-Fe-P Alloys for Lead FramesDetection of Crack Propagation in Alumina Using SrAl2O4:(Eu,Dy) Luminescent PaintDynamic Deformation and High Velocity Impact Behaviors of Ti-6Al-4V AlloysEstimation of Contact Interface between Tool and Workpiece in Cold Forming Using FEM AnalysisNeutron Diffraction Profile Analysis to Determine Dislocation Density and Grain Size for Drawn Steel WiresWeb-Site Survey of Recent Ecomaterials in JapanStudy on a Reactor Design and Catalyst for Hydrogen Generation from Alkaline Solution of Sodium BorohydrideComparison between Eco-Profiles of Innovative Nanoclay and Traditional TBBPA Flame RetardantsImprovement of Materials Efficiency for a Sustainable Resource ManagementEcomaterials-Foam Plastics Synthesized from Plant Oil-Based ResinsMulti-Valent Metal Salt Hydrates as Catalysts for the Esterification of Fatty Acids and AlcoholsBeta Zeolites Modified with Lanthanum and Cerium Oxides for the Isomerization of HexaneA New Challenge of Polymer Thermoelectric Materials as EcomaterialsApplication of 3-Dimensional Powder Laminating Fabrication to Metallic ComponentsLife-Cycle Evaluation of Ecobalance Performance of Ecomaterial-Type Building Materials by Multiple Eco-Indicator MethodControlling of the Solidification Structure for Recycling by Ultrasonic Vibration3-Dimensional Characterization of Polycrystalline Bulk Materials Using High-Energy Synchrotron RadiationThree-Dimensional Simulation of Coarsening and Grain Growth in SinteringModelling of Precipitation Hardening in Alloys: Effective Analytical Submodels for Impingement and CoarseningDetermination of Percolation Threshold for Random Boundary Network on the Basis of EBSD/OIM Observations3-D High-Density Strain Mapping Procedure Based on High-Resolution CTPhase-Field Modeling of the Microstructure Evolutions in Fe-Cu Base AlloysA Thermodynamic Description of the Al-Ir SystemFree Energy Calculations of Precipitate NucleationAbnormal Grain Growth Topology and KineticsThermodynamic Assessment of the Al-Cr System by Combining the First Principles and CALPHAD MethodsThermodynamic Analysis of Steels by Incorporating First-Principles Calculations into the CALPHAD ApproachModeling of HCP/D019, D019/L10, BCC/B2 Phase Equilibria in a Ti-Al System by the CVM-CALPHAD MethodTheoretical Study of Glass Transition Based on Cluster Variation MethodComputer Simulation of the Precipitate Evolution during Industrial Heat Treatment of Complex AlloysComputer Simulation of Grain Growth in Three Dimensions by the Phase Field Model with Anisotropic Grain-Boundary MobilitiesPhase Transformation Modeling of Medium-Carbon Forging SteelEvolutionary Computing for Metals Properties ModellingModelling of Dynamic Recrystallisation of 316L Stainless Steel Using a Systems ApproachModelling of Oxide Scale Evolution in Hot Rolling and DescalingAnalytical and Computational Models for Investigations of Local Buckling in Honeycomb SandwichesKinetic Features of Solid-State Reactive Diffusion between Au and Sn-Base SolderCharacterization of the Heat Transfer Boundary Conditions during Cooling of a Horizontal Disk with a Water ColumnThe Influence of Injection-Molding Parameters on the Dimensional AccuracyIdentification of Thermal Properties of the System Casting-MouldAn Analytic Model for Predicting Roll Force in Billet Rolling Process with Vertical Stands and Horizontal Stands MountedFinite-Element Modeling of Multi-Pass Forging of Nickel-Base Alloys Using a Multi-Mesh MethodModels and Equations for Atomic Transport Coefficients of Liquid Metals: Viscosity and Self-DiffusivityA Study on Development of Forming Roller for Miniature Metal Balls Manufacturing ProcessApplication of the Shape Sensitivity Analysis in Numerical Modelling of Solidification ProcessMeasuring and Modeling Grain, Grain Boundary and Grain Edge Average Curvature and their Application to Grain GrowthUsing of FEM to Analyse of the Reinforcement Bar Rolling ProcessModeling of Generalized Continua on Macroscopic Scales: Towards Computational Mechanics of Microstretch ContinuaA Multiscale Approach for Composite Materials as Multifield ContinuaPhase Field Model Simulation of Abnormal Grain Growth by Solid-State WettingMacro and Macro/Micro Models of Solidification - Numerical Aspects of Process SimulationKinetics of the Austenite-to-Ferrite Phase Transformation - From the Intrinsic to an Effective Interface MobilityModelling the Dependence of Uniform Elongation on Grain SizeA Coupled-Volume Approach to the Multi-Scale Modelling of Quasi-Brittle MaterialsA Multi-Scale Model of Martensitic Transformation Induced Plasticity at Finite StrainsMultiscale Modelling of Stick-Slip Transition of Rough (Fractal) SurfacesOut of Plane Models for Composite Brickwork-Like MaterialsMultiscale Modelling of the Mechanical Behaviour of Oriented Semicrystalline PolymersNonlocal Interface Mechanical ModelStructural Models of Progressive Interface Failure under Shear StressesMultifield Potentials and Derivation of Extremum Principles in Rate PlasticityConsolidation and Mechanical Properties of Gas Atomized Al-Si PowderPowder Injection Molding of Ti6Al4V AlloyEffects of Alloying Elements on the Sintering and Heat Treatment of Elementally Mixed Aluminum Powder Alloys3D Coupled Thermomechanical Finite Element Analysis of Ultrasonic ConsolidationInvestigation of Sintering of Spherical Copper Powder by Micro Focus Computed Tomography (?CT) and Synchrotron TomographyDifficulties with Ti-Ni Powder Metallurgy Process and Multi-Stage Sintering Technique for TiNi SMAPrealloyed Cu-Fe Powder MaterialsDevelopment of Pre-Alloyed Powders for Diamond Tools and their CharacteristicsDirect Metal Laser Sintering Some Improvements of the Materials and ProcessInfluence of Additives and Hot-Press Sintering on Lipophilic Properties of Silicon Nitride CeramicsGas Atomization of High Melting Reactive Metals by a Crucible- and Ceramic-Free TechniqueInvestigation on the Densification Mechanism of Warm CompactionFe3Al Based Alloys Fabricated by Spark Plasma Sintering from Mechanically Activated PowdersX-Ray Diffraction Study of Stress in a Magnesium-Hydrogen System Produced by High-Energy Milling of PowdersFracture Behaviors of Niobium Alloys by Hydrogenation and its Application for Fine Powder FabricationEvolution of Microstructure during Hot Deformation of the PM Molybdenum Alloy TZMNanotubes Obtained from Mono and Bimetallic Carbides Produced by Mechanical AlloyingPreparation of Ti3SiC2 Particulate Reinforced Cu Matrix Composite by Warm Compaction Powder MetallurgyProduction of Titanium Nitride by Carbothermic Reduction of the Anatase and Rutile Forms of Titanium DioxideEffect of Manufacturing Methods on Structure and Properties of the Gradient Tool Materials with the Non-Alloy Steel Matrix Reinforced with the HS6-5-2 Type High-Speed SteelThe Phase Evolution of the TiC Cermet Fabricated by Spark Plasma SinteringA Study on the Development of Environment-Friendly Ag-SnO2 Electric Contact Materials through a Powder MetallurgyFormation of Ni57Zr20Ti22Pb1 Amorphous Powders by Mechanical AlloyingMicrostructure and Thermoelectric Properties of Rapidly Solidified and Hot Pressed N-Type 95% Bi2Te3-5%Bi2Se3 AlloysFabrication of Micro Porous Aluminum by Powder SinteringSynthesis of Mono-Dispersed Fine Spherical Silver Powders by Chemical Reduction MethodRole of Strain Gradient and Dynamic Transformation on the Formation of Nanocrystalline Structure Produced by Severe Plastic DeformationAn Effect of High Magnetic Field on Grain Growth in Nanocrystalline IronProgress and Current Status in Research on Nanostructured Cu-Ag Microcomposites for Conductor WiresMultiscale Molecular Dynamics Simulations of Nanostructured MaterialsNon-Equilibrium Solute Partitioning and Microstructure Formation in Rapidly Solidified Al-Sm AlloysDeformation Mechanism Map of Nanocrystalline Metallic MaterialsEffect of Zr-Doped Ceria Catalyst on Carbon Deposition on Ni/YSZ CermetsEnhanced Strength and Ductility at a Cryogenic Temperature in a Nanostructured Ni-Fe AlloyGrain Size Saturation during Severe Plastic DeformationNanostructuring a Zr-Hf Alloy via Large Strain RollingMicrostructural Characteristics of Cu-Fe-P Alloys Severely Deformed by Accumulative Roll Bonding ProcessApplication of Equal-Channel Angular Pressing to Aluminum and Copper Single CrystalsCoarse Second Phase Particle Size Distribution of UFG Al Alloys Processed by Severe Plastic Deformation: Effect on Cavitation during Superplastic DeformationAn Alternative Constitutive Equation for SuperplasticityControlling the Thickness Uniformity in Equal Channel Angular Rolling (ECAR)Nanostructured Titanium Based MaterialsDevelopment and Properties of High Strengthened Carbon Steels Produced by Repetitive Side Extrusion and Heat Treatment ProcessCorrosion Behavior of Al-7wt% Si-1.5wt% Cu Severely Deformed by Equal-Channel Angular PressingGrain Refinement in High-Purity a-Iron Base Alloys during Thermomechanical ProcessingEffect of Equal-Channel Angular Pressing (ECAP) on Creep in Aluminium AlloysStudy of Ultrafine Grain Structure of a Pipeline SteelMechanical Properties of Al-5.7wt% Ni Eutectic Alloy Severely Deformed by Equal-Channel Angular PressingMicrostructural Changes in As-Cast 7475 Al Alloy during Warm Sever ForgingStructure of Low Cobalt Alloy for Permanent Magnets of Basis System Fe-Cr-Co at Complex Two-Level Loading in Isothermal ConditionsSuperplasticity of Fine-Grained 20VOL%SiC Whiskers Reinforced 2024 Aluminum Alloy Produced by ECAP with a Rotary DieSuperplastic Deformation of a Mg-8% Li Alloy Processed at Room Temperature by ECAPInvestigation, Application and Assessment of T122 Heat Resistant SteelDevelopment and Improvement of 9-12%Cr Steels by a Holistic R&D ConceptEffect of Non-Metallic Inclusions on Notched Low Cycle Fatigue in P/M IN100 Nickel-Base SuperalloyHot Working of High-Purity Nickel-Niobium AlloysEffect Factors of Internal Stress and Deformation Mechanism for Single Crystal Nickel-Base Superalloys during CreepEffect of Ausageing on the Precipitation Behavior of MX Carbonitride in Modified 9Cr-1Mo SteelEffect of Boron on Microstructure and Creep Deformation Behavior of Tempered Martensitic 9Cr SteelInteraction of Recrystallization and Precipitation during Hot Forming of Alloy 80AImprovement in Creep Strength of Heat-Resistant Ferritic Steel Precipitation-Strengthened by Intermetallic CompoundContribution of Z-Phase Precipitation to Recovery of Martensitic Structure in High Chromium Creep Resistant SteelTwo-Phase Microstructures of Gamma+Gamma-Prime Formed by Phase-Separations due to Heat-Treatments of Elastically Constrained Ni-Al-Ti AlloysNovel Concept of Austenitic Heat Resistant Steels Strengthened by IntermetallicsOn Bainite Transformation Kinetics and MechanismChange in Morphology of ?' of Prior-Crept Single Crystal Nickel-Based Superalloy, CMSX-4, with Simple AgingRole of Transient Creep in ?-Single Phase Ni-20Mass%Cr AlloyPrecipitation of Gamma-Prime and Gamma-Double Prime Coherent Phases in Three-Phase Ni-V-Si AlloysInfluence of Prolonged Exposure on the Microstructure and Stress-Rupture Property of a Single Crystal Ni-Base SuperalloyTemperature Dependence of Lattice Distortion in Strongly Creep-Deformed Single Crystal Superalloy SC16Some Behaviors of Phosphorus in Several Typical SuperalloysTime Dependence of ?/?' Lattice Mismatch in Creep-Deformed Single Crystal Superalloy SC16 at 1173 KThe Validation of Microstructural Prediction in Nickel SuperalloysThe Combination of Modeling Techniques to Predict the Service Behaviour of Heat Resistant AlloysDevelopment of New Alloys with Excellent High Temperature Creep Characteristics of 700?C or MoreOptimization of Weld Conditions and Alloy Composition for Welding of Single-Crystal Nickel-Based SuperalloysDrawbacks to the Application of Long-Term Degradation Tests, with Reference to Metal Dusting of Nickel-Base Alloys at High TemperaturesRecrystallization and Grain Growth during Alloy 718 ProcessingStress Exponent of Minimum Creep Rate of Single Crystal Nickel-Based Superalloy, CMSX-4, AT 1273KRecent Activities on Directional Solidification at the State Key Laboratory of Solidification ProcessingCreep Strength Assessment of High Chromium Ferritic Creep Resistant SteelsCreep Behavior of Single Crystal Superalloy DD6 at 760?C and 980?CManufacturing and Analysis of Mechanical Properties of Superalloy 718 in Hydraulic ForgingComputer Simulation on Formation of Precision Forgings of Titanium Alloy and SuperalloyProperties of Boron Fiber Reinforced Aluminum Matrix Composites Fabricated by Pulsed Current Hot Pressing (PCHP)Self-Healing of Creep Cavities by Boron Segregation and Boron Nitride Precipitation Autonomously Developed during High Temperature UseTiNi Shape Memory Alloys for MEMS: Thin Film Deposition, Thermophysical Properties and Laser Micromachining CharacteristicsPhase Transformation and Microstructures in Ni and Cu Base Ferromagnetic Shape Memory AlloysEffect of Aging on Microstructure and Martensitic Transformation in Ti-Zr-Ni Shape Memory AlloysFunctionally Graded Ti-Ni Shape Memory AlloysMechanical Properties of Fe-Pd Ferromagnetic Shape Memory Alloy Thin Films Prepared by Dual Source DC SputteringThe Effect of Crucible Configuration on Joule and Pinch Effects in EMCC Process of SiliconFabrication Method for Metallic Closed Cellular Materials Containing Different Materials from that of Cell Walls by SPS MethodCharacteristics of Ti50-Pd(50-x)-W(x) High Temperature Shape Memory AlloyEqual Channel Angular Extrusion (ECAE) of Ni-Ti Based Shape Memory Alloy SystemsBiodegradable Fiber Reinforced Ti Composite Fabricated by Spark Plasma Sintering MethodOn Cyclical Phase Transformations in Driven Alloy Systems: A Mass-Action Kinetics ApproachTi-Ni Shape Memory Alloy Film Cantilever Actuator for Micro-ProbingIntelligent Materials Synthesis Based on Millimeter-Wave Heating and SPS MethodsElectrochemical Properties of Type 304 Stainless Steels Produced by Several MethodsEffect of Strain Rates on the Transformation Behavior of Ni-Ti AlloyPiezoelectric Composite and its Multilayer ActuatorEffect of Magnetic Field on Martensitic Transformation Temperature in Ni2MnGa with Single Variant and Multi-Variant StatesRecent Advances in Microwave and Millimeter-Wave Processing of MaterialsPitting Corrosion Behavior of Sintered SUS444 Stainless Steel in MgCl2 SolutionEnlarging the Temperature Range for Maximum Wear Resistance of TiNi Alloy Using a NTE PhaseMagnetic Field-Induced Martensitic Transformation of Heusler-Type Ni2MnGa SystemHigh-Temperature Shape Memory Effect of Ti-(Pt,Ir)Effects of Fiber-Resin Interface Property on Shape Recovery and Mechanical Properties of Denture-Base-Resin Matrix Smart CompositePreparation of Fe2VAl Thermoelectric Module by RF SputteringMolecular and Nanometer-Scale Self-Organized System Generated by Protein Motor FunctionsNitrogen Ion Beam Irradiation on Amorphous CarbonStudy on the Magnetic Properties and Domain Structure of NdFeNbZrB Nanocomposite Permanent MagnetsThermoelectric Properties of Arc-Melted Ba8Al16Si30 ClathrateShape Memory Characteristics of Ti-Ni Alloy Using Mechanically-Alloyed PowderThe Effects of Geometrical Factors on the Step-Up Ratio in Piezoelectric TransformerEffect of Aging and Microstructure on Mechanical Rolling CuAlNi Shape Memory AlloyStored Energy and Recrystallization ProcessOn the Effect of Texture in Experimental Grades of High-Silicon Electrical SteelTexture and Orientation Relationships in Phosphorus Added TRIP SteelsEffect of Texture on Anisotropic Creep of Pressurized Zr-2.5Nb TubesTexture of AZ31 Magnesium Alloy Sheet Heavily Rolled by High Speed Warm RollingA Comparison of Grain Boundary Engineering Mechanisms in Copper and BrassNew Grain Interaction Models for Deformation Texture SimulationsTexture and Creep Anisotropy in Zirconium AlloysModeling Compression and Tension Reloads in Copper Prestrained by RollingGrain Boundary Engineering: Progress and ChallengesTexture and Grain Boundary Character Modification of Metallic Materials by Electromagnetic ProcessingDeformation Conditions and Stability of the Basal Texture in MagnesiumTwinning and Detwinning during Cyclic Deformation of Mg Alloy AZ31BWebsite Publication of Calculation Computer Program and Visualized Pieces both of Bcc and Fcc Pencil Glide Theory for Deformation TextureImprovement in Specific Electric Resistance of Bi1.5Pb0.5Sr1.7Y0.5Co2O9-d by Texture DevelopmentApplication of Asymmetric Rolling to Texture Control of Silicon SteelMicrostructure and Texture Evolution during Annealing after Temper Rolling of a 2 wt.-% Silicon Electric SteelTexture and Microstructure of Cold Rolled and Recrystallized Pure NiobiumTexture Evolution during Diffusional Heat Treatment from Roll-Bonded Ti/Ni Laminates to TiNi Shape Memory Alloy SheetsExperimental and Numerical Investigation of Texture Development during Hot Rolling of Magnesium Alloy AZ31Multiscale Modelling of Plastic Deformation of Polycrystals: Implementation of Texture-Based Anisotropy in Engineering Applications (FE Codes for Forming, Prediction of Forming Limit Curves)Texture Development in Polycrystalline Fe-Ga Magnetostrictive MaterialsStudy of Deformation Texture of Equal-Channel Angular Pressed CP-TitaniumEvolution of Texture in a Ti-IF Steel during Warm Rolling and Cold RollingEffects of Electric Field Annealing on Recrystallization Texture and Plastic Strain Ratio (r-Value) of IF Steel SheetBond-Orientational Ordering in Cyclohexyl-Biphenyl Type Liquid CrystalsSynthesis of Carbon Nanotubes and its Applications in Composites and Field Emission LightSputtered Cu Films Containing Various Insoluble Substances for Advanced Barrierless MetallizationBehavior of Oxide Film in Transient-Liquid-Phase Bonding of Tin with Filler of Bismuth FilmMicrostructure and Gas Sensing Property of Porous SnO2 Sputtered FilmsLuminance Characterization of La3Ga5SiO14 Thin Films by Sputtering DepositionEffect of Film Thickness and Annealing Temperature in Stress-Induced Damage in Metal FilmsSelf-Assembly of Nano-Sized Arrays on Highly Oriented Thin Films of Poly(tetrafluoroethylene)Atomic Assembly of Thin Film MaterialsMeasuremet of Mechanical Properties of Thin Films and Nanostructured Materials at High Spatial ResolutionThe Role of Segregation in InGaAs HeteroepitaxyMolecular Dynamics Simulation on Formation of Icosahedron and Coalescence of Pt NanoclustersHydrogen Measurements in SiNx: H/Si Thin Films by ERDAEffect of DC Bias Voltage on the Optical Properties of TiO2 Thin Film Deposited by Plasma Assisted Electron Beam EvaporationFabrication of Sputtered TiO2-XNX Photocatalyst Using Spark Plasma Sintered TargetsIn Situ Scanning Electron Microscopy Observation of the Pattern Formation on the Surface of Al/Ge Bilayer FilmsSubstrate Effect on the Diamond-Like Carbon Films Synthesized by RF Plasma Enhanced Chemical Vapor DepositionEmbossing on Epoxy Thermoset Polymer Using SiO2 Coated Nickel TemplateMicrostructure and Texture in an Alpha/Beta Titanium Alloy and their Impact on Mechanical ResponseAgeing of C-Containing and C-Free Ti-15Cr and Ti-15-3Melting and Casting of Titanium AlloysConstitutive Analysis of the High-Temperature Deformation Behavior of Single Phase a-Ti and a+? Ti-6Al-4V AlloyThe Effect of Oxygen on Heat Treatment Behavior of Titanium-50mass%Tantalum-5mass%Zirconium AlloyTemperature and Strain Rate Effects on Plastic Deformation of Titanium AlloysBeta Phase Decomposition in a TiAl Alloy during Continuous CoolingProduction of Functionally-Graded Samples Using Simultaneous Powder and Wire-FeedAn Experimental and Modelling Study of Laser Fabricated SamplesNew Process-Microstructure Method for Affordable 2024 Series Aerospace Aluminum AlloysEffect of Surface Oxide Films on Degradation of TitaniumOptimization of the Equal Channel Angular Pressing (ECAP) Process for Strain HomogeneityA Physically Based Flow Rule for the Simulation of Ti-6Al-4V Forging in the a - ? RangeMicro Metal Injection Molding Process for High Performance Titanium AlloyColloidal Photonic Crystals Using Space -An Academic-Industrial Collaboration-Oxidation Effects during High Temperature Deformation of CP Ti AlloyOn the Nature of the Growth of Bainitic a plates in Metastable ? Ti AlloysMicrostructure and Mechanical Properties of an Advanced Niobium Based Ultrahigh Temperature AlloyPrediction of Flow Stress in Ti-6Al-4V Alloy with Hydrogen at High Temperature Using Artificial Neural NetworkStudy on a Damage Tolerant Titanium AlloyMicrostructures and Cohesiveness of Alkali- and Heat-Treated Films on a Ti-15Zr-4Nb-4Ta AlloyCharacterisation of the Phase Transformations in a Metastable ? Titanium AlloyFriction Stir Processing of Cast NiAl BronzeMetallurgical and Mechanical Properties of Friction Stir Welded Ultra Fine Grained SteelLocal Manufacture of MMC Using FSWMicrostructural Evolution of Cast Mg-Al-Ca Alloy during Friction Stir ProcessingMicrostructure Evolution and Microstructure-Property Relationships in Friction Stir Processing of NiAl BronzeTensile and Fatigue Properties of Friction Stir Processed NiAl BronzeMicrostructure of Friction-Stir-Welded High-Nitrogen Stainless SteelFriction Stir Welding of Precipitation Hardened Ni Based AlloysControl of Grain Size and Texture in Al Alloys Utilizing Friction Stir ProcessingEnhancement of Formability in Magnesium Alloy AZ31B via Friction Stir ProcessingEvaluation of Post-Weld Heat Treatments to Restore the Corrosion Resistance of Friction Stir Welded Aluminum Alloy 7075-T73 vs. 7075-T6Relation between Strength and Microstructure in Friction Stir Welded Joints of A383 and A5052 Aluminum AlloysResidual Strain Measurements in a Friction-Stir Processed AZ31B Magnesium Alloy Using Neutron DiffractionExperimental Thermal Analysis of Friction Stir ProcessingControlled Plasticity Burnishing to Improve the Performance of Friction Stir Processed Ni-Al BronzeMicrostructural Evolution and Performance of Friction Stir Welded Aluminum Matrix Composites Reinforced by SiC ParticlesIn Situ Observation of Weld Solidification and Phase Transformation Process Using Synchrotron RadiationTransient Local Melting in Al 7075-T6 Friction Stir Spot WeldsA Thermo-Fluid Analysis of the Friction Stir Welding ProcessFriction Stir Welding of Mg-14mass%Li AlloyFriction and Wear of Laser Irradiated Amorphous MetalsInfluence of Contineous Transversal Inclination of Tool on FSW JointsSolid State Welding between CPTi and AZ31B Magnesium Alloy by Friction StirringFormation of Intermetallic Compounds in Friction Bonding of Al Alloys to SteelUse of Synergistic Effects in High Power Laser-GMA Hybrid Welding for Manufacturing of Thick Walled Structural PipesThe Oscillation Behaviour of Liquid Metal in Arc WeldingMicrostructure of SiC/Cu Interface by Pulsed Electric-Current BondingInfluence of Alloying Elements on Interfacial Reaction and Strength of Aluminum/Steel Dissimilar Joints for Light Weight Car BodyCrystallographic Texture of Dissimilar Laser Welded Al5083-Al6013 SheetsPrecise Resistance Welding with Wire InsertEffects of Nitrogen on Weld Metal Microstructure and Toughness in Submerged Arc WeldingRepair Welding of Irradiated Reactor Vessel Steel by Low Heat Input GTAW and LBWUltrasonic Friction Power in Microelectronic Wire BondingA CO2 Gas Shielded Gas Tungsten Arc and its Application to Welding of Steel SheetsAnodic Bonding of Ag-Impregnated Glass and Reaction of Derived Joints to Reverse VoltageMicrostructure and Properties of High Strength Weld MetalsAdvancement in Prediction and Control of Welding Residual Stress and DistortionJoining by Forming with a Flat Counter Tool - A New Way of Joining Magnesium ComponentsBraze Pressure Welding (BPW) - A New Method for Joining Steel Pipes -A Study on Fatigue Strength Improvement of Aluminum Alloy Resistant Spot Welds by Cold WorkingCharacteristics of Nd:YAG Laser Welded 600MPa Grade TRIP and DP SteelsModeling of Molten Drop Oscillation in Gas Shielded Metal Arc WeldingMicro Flash Welding of Super Duplex Stainless SteelsElectron Beam Welding of Crack Sensitive Nickel Super Alloy MAR-M-002Laser Hybrid Welding in Stainless Steels and in High Strength SteelsVisual Information Acquirement and Real-Time Control Methodologies for Weld Pool Dynamics during Pulsed GTAWModeling of Steel Weld Microstructure Using Monte Carlo and Finite Difference Hybrid MethodSelection and Design of Brazing Fillers for Metal-Ceramic JointsSteel-to-Aluminum Joining by Control of Interface Microstructures - Laser-Roll Bonding and Magnetic Pulse Welding -Abnormal Tin Whisker Growth in Rare Earth Element-Doped Sn3Ag0.5CuXCe Solder JointsFE Modelling of Mechanical Tensioning for Controlling Residual Stresses in Friction Stir WeldsBrazing of CP-Titanium / CP-Titanium and Titanium Alloy / Stainless Steel with Laminated Ti-Based Filler MetalLiquation Cracking in Aluminum WeldsThe Investigation of Diffusion Welding Process and Interfacial Microstructure and Properties on TiCN/NiMicrostructure of Brazing Joint of Silicon Nitride / 40CrMo SteelLaser Brazing Phenomena of Heat-Resistant Alloys with Precious Brazing Filler MetalsLaser Grooving and Welding of Cracks Occuring at Dies for Die CastingMinimization of Heat-Affected Zone Size in Welded Ultra-Fine Grained Steel under Cooling by Liquid Nitrogen during Laser WeldingInsulated Rail Joints for Signalling ApplicationsDevelopment of Al/Cu Dissimilar Brazing Joint Controlled Form of Intermetallic CompoundMicro-Resistance Spot Welding of Nickel Free Austenitic Stainless SteelGrain Growth Behavior and Mechanical Properties of the Friction Stir Welded Zone of 7055 Al Alloy Followed by Post Weld Heat TreatmentWelding Phenomena in Hybrid Laser-Rotating Arc Welding ProcessAnalysis of the Welding Materials by OPA TechniqueEffects of Chemical Compositions of Welding Rods on J-R Fracture Resistances and Tensile Properties of Type 347 WeldsSurface Hot-Shortness of Steels Induced by a Small Amount of Copper and Tin from Scrap Steels and its Suppression MethodsEvaluation of Physical Parameters in Modelling Softening-Precipitation Interaction in Hot Worked Nb Microalloyed AusteniteMicrostructure Characteristic and Strengthening Mechanism of Ti-Microalloyed Automobile Beam Steel Produced by Compact Strip ProductionTailored Solutions in Microalloyed Engineering Steels for the Power Transmission IndustryStudy of Laboratorial Simulation of V-N Microalloyed CSP SteelModeling of Microstructural Gradients in TMCP Bars to Produce Value Added ProductsPhysical Simulation of Thin Slab Continuous CastingExperimental Studies into Strip Casting of SteelEffect of Dislocations on Precipitation of Nb-C in a-FeThe Effects of Nb Carbo-Nitride Precipitation Conditions on Abnormal Grain Growth in Nb Added SteelsDeformation Banding and the Role of Transition Bands between a-Fibre Components on Recrystallization in Low Carbon Steels Studied by EBSDNitriding Behavior and Strengthening Mechanism of Ti Added SteelsEffect of Heat Treatment on the Structure and Morphology of Amorphous Steel Produced Using Spray Metal FormingNbC Precipitation Kinetics during and after ?/a Transformation of a Nb Microalloyed SteelPrecipitation of Niobium Carbonitrides: Chemical Composition Measurements and ModelingConstitutive Modeling of Stress-Strain Curves of IF AusteniteEffect of the Annealing Conditions on the Microstructure and Mechanical Properties of a 0.04% C Al Killed SteelEffect of Cr on Strain Ageing Behaviour of Low Carbon SteelStudy of the Development of Heterogeneous Grain Size in the Through-Thickness Direction of Hot Rolled ELC SteelsMetal Dusting and Oxidation at 593 and 704?CA Physically Based Model for Bake-Hardening Steels and Dent ResistanceDevelopment of Low Carbon Boron Steel for Wire DrawingHigh-Temperature Phase Transitions and Mechanical Properties in Steel of Peritectic CompositionMechanism of Hydrogen Embrittlement of Austenitic SteelsMicrostructural Development in Bearing Steel during Rolling Contact FatigueNiobium in Microalloyed Structural and Engineering SteelsStudy on the Formation of Ferrite-Cementite Microstructure by Strain Induced Dynamic Transformation in Medium Carbon SteelsDetermination of Inclusions of Boron and Titanium in Steel by Original Position Statistic Distribution Analysis TechniqueInfluence of Continuous Annealing Parameters on the Mechanical Properties of Cold Rolled Ultra High Strength Steels Characterization of Metallurgical Transformations in Multi-Phase High Strength Steels by Barkhausen Noise MeasurementMethods of Tinplate Imperfection AnalysesThixoforming of Steels - A Status ReportRole of Manganese and Chromium on the Segregation Kinetics of Carbon and Nitrogen to the Dislocations in Ferritic SteelsMicrostructure and Mechanical Properties of Ausformed Ultra High-Strength TRIP-Aided SteelsEffect of Initial Processing on the Microstructure-Property Relationships in Bake-Hardened C-Mn-Si TRIP SteelsSize Distribution of Retained Austenite in Phosphorus-Containing TRIP SteelsLow-Carbon Manganese TRIP SteelsOn the Phase Transformations in Hot Rolled TRIP-Assisted Multiphase SteelsModelling the Transformations Kinetics from Work-Hardened Austenite in a TRIP SteelDevelopment of Seamless Pipes with Improved Strength-Toughness Combination for Hydraulic CylindersCrystallography and Mechanical Properties of Ultrafine TRIP-Aided Multi-Phase SteelsEffects of Thermomechanical Processing on Microstructure and Mechanical Properties Multiphase Steels Exhibiting a TRIP EffectFormation of Microstructure and Texture in Intercritically Rolled C-Mn SteelState-of-Art High Strength Steel Sheets for the Automotive ApplicationEffect of Processing Route on Mechanical Behavior of C-Mn Multiphase High Strength Cold Rolled SteelSteel Sheets Mechanical Properties ImprovementAdvanced High Strength Steels for Automobile Body StructuresMicrostructure Model for a Dual-Phase SteelHistorical Aspects of Thermomechanical Processing for SteelsInnovative Annealing Techniques for the Production of Advanced High Strength SteelsEffect of Niobium on Zn-Coated Dual Phase Steel SheetMechanical Properties in Ultrahigh Strength Secondary Hardening Steels Bearing Co and NiWorkability and Straining Behaviour of High Silicon Steels (3.0-6.3%Si) by Hot Torsion and RT Compression TestsEffect of Aluminum and Titanium Content on Grain Growth, Texture and Magnetic Properties in 3%Si Non-Oriented Electrical SteelCreep Property Evaluation of Heat-Resistant Steels by Small Punch Creep TestSaw Welded Joints of Two API Steels Subject to SCC Laboratory TestingOriginal Position Statistic Distribution Analysis (OPA)-Novel Statistic Characterization Method of Different Chemical Compositions and its States of the MaterialsEffects of Heat Treatment and Composition Modification on SAE 8620 SteelsStatic Recrystallization of Tool SteelsRetained Austenite - Residual Stress - Distortion Relationships in Carburized SAE 6820 SteelAdvanced Material and Processing for the High Temperature Carburising of Microalloyed Case Hardening SteelsQuenching and Partitioning of Ni-Added High Strength SteelsThe Characterisation of Oxide Scales Grown on Nickel Containing Steel Substrates Using Electron Backscatter DiffractionComparison between Charpy Transition Temperature TCVN and Reference Temperature T? for 10Ni3CrMoV SteelThe Development of New-Typed Air-Cooled Mn-Series Bainitic SteelsThe Development of Ultra-Fine High Performance Low Carbon Bainitic Structural SteelStudy on Corrosion Fatigue Behavior of a High Strength Steel with Carbide Free Bainite/Martensite Duplex-Phase StructureMartensitic Structural Steels for Increased Strength and Wear ResistanceIntermediate Transformation Structure and Control Cooling Process in Low Carbon Bainitic SteelOptimized Thermomechanical Treatment for Strong and Ductile Martensitic SteelsStudy of Ultra-Long Life Fatigue of High Strength Steel with Duplex-Phase of Carbide-Free Bainite and MartensiteEffect of Manufacturing Conditions on Toughness in the Middle Carbon Martensitic Steels Produced by the Reheat - Quenching ProcessOn the Formation of a Non-Traditional Pearlite MorphologyGraphitization Behavior of a Spray Formed Ultra High Carbon Steel during Hot RollingRecrystallization and Spheroidization Behavior of High Carbon Pearlitic Steels Investigated by Means of Orientation Imaging MicroscopyRefinement of Sub-Grain and Enhancement of Impact Energy Absorption for Ultra-High Strength Bainitic SteelThe Ultra-Fine Bainitic Steels and Refinement TechnologyThe Effect of Plastic Deformation on the Formation of Different Morphologies of Ferrite upon CoolingThree-Dimensional Observation and Growth Kinetics of Proeutectoid Ferrite Formed at Austenite Grain Boundary in a Low Carbon Microalloyed SteelModeling the Effect of Austenite Grain Size Distribution on Austenite Decomposition KineticsModeling Austenite-to-Ferrite Transformation Kinetics in Low-Carbon Manganese Steels during Continous CoolingEffect of Micro-Segregation on Phase Transformation and Residual StressSimulation of the Process of Hot Rolling of Seamless TubesA Phase Transformation Model for the Austenitisation of Martensite in Dual-Phase SteelAn EBSD Study of Orientation Relationships during Phase Transformations in Ultra High Performance SteelsEffect of Hot Deformation and Cooling Rate on Phase Transformations in Low Carbon HN5MVNb Bainitic SteelTransformation Behavior of Supercooled Austenite during Hot Deformation of Plain Medium Carbon Steel within (?+a) 2-Phase Field at a Low Strain RateEffect of Annealing Time on Microstructural Evolution and Corresponding Mechanical Properties of Cold Drawn Pearlitic Steel WiresAustenite Formation in C35 and C45 AlloysCold Workability and Magnetic Properties of 6% Si SteelInteractions between Recrystallisation and Phase Transformations during Annealing of Cold Rolled Nb-Added TRIP-Aided SteelsInfluence of Magnetic Field on the Mechanical Properties of Austempered Ductile Iron (ADI)Gas Quenching with Controllable Heat ExtractionMorphological Evolutions in Steels during Continuous Rapid HeatingWeldability of Ultra-Fine Grained Atmospheric Corrosion Resistant SteelStress- and Strain Induced Phase Transformations in Pearlitic SteelsNanocrystallization of Bulk Steels through ?/a TransformationEqual Channel Angular Pressing in a Pearlitic Structured SteelUltrafine Grained Steels due to Super Short Interval Multi-Pass Rolling in Stable Austenite RegionInfluence of Deformation Parameters on Deformation Induced Ferrite Transformation (DIFT) in Plain Low Carbon SteelEffect of Ultra-Fast Cooling after Rolling in Stable Austenite Region on Grain Refinement of C-Mn SteelWork Hardening in a Fine Grained Austenitic Stainless SteelRefinement of Cementite in High Strength Steel Plates by Rapid Heating and TemperingProspects and State of the Art of TMCP Steel Plates for Structural and Linepipe ApplicationsTransformation and Precipitation Behavior in the New Conceptual TMCP Process Utilizing Heat Treatment On-Line ProcessInner Crack Heat-Healing in Low Carbon Steel with LanthanumSteels with Ferrite-Bainite Microstructure with Improved Weldability and Cold Resistance for Main PipelinesMicrostructure and Properties of Pipeline Steel with Acicular FerriteDevelopment of Modern Heavy Plate Steels for PipelinesGrain Scale Assessment of Variant Selection in a Thermomechanically Processed TRIP SteelDiffusion-Controlled Phase Transformation under High Magnetic Field in Medium and High Carbon SteelsRust Layer Structure and Corrosion Resistance of High Strength Microalloyed SteelsEffect of Carbon on Work Hardening Behavior of 18%Ni Martensitic SteelNano-Carbides and the Strength of Steels as Assessed by Electrical Resistivity StudiesModeling of Microstructure Evolution of Athermal Transformation of Lath MartensiteThe Ultrahigh Ductility of an Ultrahigh Carbon Steel Containing 3%SiUltra Rapid Softening of High Strength Structural Steels by Thermomechanical TreatmentCoarsening Behavior of Nanometer-Sized Carbides in Hot-Rolled High Strength Sheet SteelMicrostructural Features of 'Quenching and Partitioning': A New Martensitic Steel Heat TreatmentThermomechanical Treatments of Ultrahigh Carbon Steels and Optimal Microstructures to Improve ToughnessSubstructure and Crystallography of Degenerate Pearlite in an Fe-C Binary AlloyEffect of Niobium on HAZ Microstructure and Toughness of HSLA SteelsMechanical and Thermal Properties of Ultra-High Carbon Steel Containing AluminumAdvanced Technology of Automotive Connecting RodDevelopment of Anti-Coarsening Steel for CarburizingEvaluation of Damping Property of Aluminum-Alloyed Cast Iron by Several MethodsAnalysis of Spherical Carbides Formed in Chromium Added Hypereutectoid Bearing SteelsProcessing of Submicron Grained Microstructures and Enhanced Mechanical Properties by Cold-Rolling and Reversion Annealing of Metastable Austenitic Stainless SteelsIntragranularly Nucleated Austenite in a 2205 Duplex Stainless SteelRetardation of 20%Cr Steel Oxidation with Laves Phase PrecipitationStatic Strain Aging in Cold Rolled Metastable Austenitic Stainless SteelsEffects of Si on Oxidation Behaviors in Cr-Mn-Ni Austenitic Stainless SteelsTRIP Effect and Deformation Damaging of Metastable Austenitic SteelsEffects of Drawing Strain and Annealing on the Mechanical Properties for Heavily Cold Drawn Hyper-Eutectoid Steel WiresEffect of Precipitation on Cryogenic Toughness in N-Containing Austenitic Stainless SteelsPrediction of Properties in Type 347 Austenitic Stainless Steel after Long-Term Service at High TemperaturesTexture Evolution of Ferritic (AlSl 430) Stainless Steel Strips during Cold Rolling, Annealing and DrawingThe Strain-Independence of Interpass Softening during the Hot Compression of 304 H Stainless SteelElectron Beam Freeform Fabrication on Stainless SteelThermal Fatigue Characteristics of Heat-Resisting Stainless Steel for Automotive ExhaustDecomposition of Austenite in Fe-25Cr-1N Alloy Produced by Solution NitridingStainless Austenitic CrMnCN Steels of Superior Strength Part I: Alloy Design and PropertiesGrain Boundary Engineering of High-Nitrogen Austenitic Stainless SteelThe Individual and Cumulative Effect of C and N on the Hardening and Structure of High-Nitrogen Hot Plastic Worked SteelsProperties of Low Carbon High Nitrogen Martensitic Stainless SteelsInfluence of the Shot Peening Process on the Fatigue Behaviour of Duplex Stainless Steel Reinforcing BarsN--H Interaction in Nitrided Fe--Nb AlloysAtomic Interactions in Stainless Austenitic CrMn Steels Alloyed with C, N or (C+N)Processing and Property of Net-Shaped Fe-Based Nanoparticulate MaterialNanoscale Behaviour of Certain Materials/SurfacesStructural Change during Cold Rolling of Electrodeposited CopperDiffusion Properties of Internal Interfaces in Bulk Nanocrystalline Materials: Radiotracer InvestigationHydrogen Sensing Characteristics of High Electron Mobility Transistor with a Catalytic Pd MetalEffect of Crystalline Phase on Dynamic Deformation Properties of Zr-Based BMG AlloysThermal Flow Simulation and Concave Type Slot Nozzle Design for Twin Roll Casting of Magnesium Alloy AZ31
