Advanced Research in Materials and Engineering Applications
Erscheinungsjahr 2015
ISBN: 978-3-03835-339-3
Verlag: Trans Tech Publications
Selected, peer reviewed papers from the World Virtual Conference on Advanced Research in Materials and Engineering Applications, September 22-26, 2014, Kuala Lumpur, Malaysia
Buch, Englisch, 890 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1640 g
ISBN: 978-3-03835-339-3
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Organizing Committee
Chapter 1: Material Science
Brief Review: Electrochemical Performance of LSCF Composite Cathodes - Influence of Ceria-Electrolyte and Metals Element
Use of Imaging Techniques for Viewing the Internal Structure of Rubberised Asphalt Mixtures
The Characteristics of Oil Palm Shell Biochar and Activated Carbon Produced via Microwave Heating
Surface Characteristics of Porous Coconut Shell Carbon Impregnated with Bimetallic Catalysts
Parameter Optimization of AA6061-AA7075 Dissimilar Friction Stir Welding Using the Taguchi Method
Impacts of Implementation of IBS Score Regulations of CIDB on the Concrete Volumes Required for Building Projects in Malaysia
Sustainable Removal of Heavy Metal Using Extracted Pandanusamaryllifolius Roxb.
Sustainable Analysis in the Product Development of Al-Metal Matrix Composites Automotive Component
Study on Fibre Length and Composition of Kenaf-Polypropylene (K-PP) Composite for Automobile Interior Parts
Effect of Benzyl Urea on Properties of Recycled High Density Polyethylene/Ethylene Vinyl Acetate/Egg Shell Powder Composites
Synthesis and Characterization of Biochars from Textile Sludge Precursors
The Effects of Fibre Contents on the Tensile Strength and Surface Morphology of High Density Polyethylene/Palm Pressed Fibre Biocomposite Film
The Natural Frequency of the Shape Memory Alloy Anti-Symmetric Angle-Ply Composite Plates Using Finite Element Method
Recycled High Density Polyethylene/Ethylene Vinyl Acetate (RHDPE/EVA)/Taro (Colocasia esculenta) Composites: The Effect of Caprolactam-Maleic Anhydride on Tensile Properties and Swelling Behaviour
Effect of Filler Loading and Isophthalic Acid-Maleic Anhydride (IAMA) on Properties of Ethylene Vinyl Acetate/Natural Rubber/Potash Feldspar (EVA/NR/PF) Composites
High Pressure Cold Spray (HPCS) Process as Coating Treatment for Magnesium Chassis: An Overview
Stirring Enhances Removal of Oil by Kapok Fiber
Mechanical Properties of Hybrid Thermosets from Vinyl Ester Resin and Acrylated Epoxidized Palm Oil (AEPO)
The Effects of Evaporation Time on Morphological Structure of Polysulfone/Cellulose Acetate Phthalate/Polyvinylpyrrolidone (PSf/CAP/PVP) Blend Membranes
Mix Proportion of Concrete Containing Oil Palm Wastes as Replacement for Conventional Constituents
Effect of Fibre Loading on the Flexural Properties of Natural Fibre Reinforced Polymer Composites
Anticorrosion Epoxy Coating Enriched with Nanozinc and Montmorillonite (MMT)
Stabilization of Marine Clay by Biomass Silica (Non-Traditional) Stabilizers
Electrochemical Behaviour of High Stress Steel (AISI 4340) in CO2 Environments with the Presence of H2 Gas
Development of UV LED Hydrogel Formulation Based on Polyacrylamide Hydrogel
Hydroxyapatite/ Chitosan Biocomposite for Remazol Blue Dyes Removal
Anticorrosion Performance of Zinc Ferrite Pigmented Lignin/Phenol Epoxy Novolac Resin Based Coating
Corrosion Inhibition Study of Upgraded Bio-Oil Derived Empty Fruit Bunch Using Alumina
Atmospheric Pressure Helium Plasma Treatment on 3C-SiC/Si Surface
High Production of Carbon Nanotube Bundles with Fe2O3/Al2O3 Catalyst
Synthesis of Hydroxyl Terminated Epoxidized Natural Rubber as a Binder for Solid Rocket Propellant
Preparation and Characterization of High-Density Polyethylene Blends and Recycled Poly(ethylene terephthalate)
The Deflection of the Shape Memory Alloy Composite Beams Using Finite Element Method
Pineapple Leaf Fibers Coated with Polyacrylamide Hydrogel
Flow Assisted Erosion-Corrosion of High Speed Steel (HSS) in Nanofluid Coolant
Substrate Effect on Growth Behaviour of Well-Aligned ZnO Nanorods Using an Aqueous Solution Method
The Synthesis of In Situ Cu-NbC-VC Nanocomposites by Mechanical Alloying
Tensile Properties of Hybrid Sugar Palm/Kenaf Fibre Reinforced Polypropylene Composites
Tensile Properties of Pineapple Leaf Fibre Reinforced Unsaturated Polyester Composites
Finite Element Model of Trimming CFRP Aerospace Composites
Pervaporation of Ethyl Acetate-Water Mixture through Sago/PVA Blend Membranes Cross-Linked with Glutaraldehyde
Study on Dissolution of Low Density Polyethylene (LDPE)
Hydroxyl Terminated Natural Rubber (HTNR) as a Binder in Solid Rocket Propellant
Investigations on Composite Flexural Behaviour with Inclusion of CNT Enhanced Silica Aerogel in Epoxy Nanocomposites
Synthesis and Application of Carbon Cryogel Beads Using Coconut Husk for Dye Removal
Effects of the Processing Methods on the Gas Permeability of PLA/Sepiolite Thin Films: Solution Casting versus Thermo Compression
Fabrication of Poly Caprolactone (PCL) Based Microspheres for Drug Delivery and Tissue Engineering Application
Fabrication and Characterization of PCL/GE-Based Electrospun Nanofibers for Tissue Engineering and Drug Delivery Application
Fabrication of BSA Loaded Poly(Caprolactone) (PCL) Microsphere Incorporated Chitosan Scaffolds for Tissues Engineering Application
Polycaprolactone(PCL)/Chitosan(Cs)-Based Scaffold by Freeze Drying Technique for Tissue Engineering and Drug Delivery Application
Synthesis of Nano-Polyaniline Using Different Ultrasonic Wave
Identification of Chemical Compound of Dammar Resin Using Various Solvents with Gas Chromatographic–Mass Spectrometric Method
Thermal Properties Determination of Polypropylene/Rice Straw Biocomposite Foam via DSC
Effects of Different Carbon Sources for High Level Lactic Acid Production by Lactobacillus casei
Modification of Montmorillonite with Diamine Surfactants
Pyrolysis of Empty Fruit Bunch (EFB) in a Vertical Fixed Bed Reactor
Thermogravimetric Analysis of Different Calcination Temperature of Lemon Grass Ash
Green Synthesis and Characterization of Hydroxyapatite from Fish Scale Biowaste
Pyrolysis of Palm Pressed Fibre (PPF) towards Maximizing Bio-Oil Yield in a Fixed-Bed Reactor
Thermal and Flammability Properties of Polypropylene Filled Rice Bran/Sepiolite Composite
Syngas Production from Microwave Gasification of Oil Palm Biochars
Adsorption of Humic Substances by Using Coconut Copra
Magnetorheological Elastomers: A Review
Investigation of Plastic Injecting Moulding Process Optimization in Complex Shape Product
Evaluation of Palm Biodiesel - Diesel Blending Properties, Storage Stability and Corrosion Behavior
Removal of Reactive Black 5 Dye Using a New Polyacrylamide Grafted Cellulose Flocculant Derived from Pandan Leaves: Optimization Study
Effect of Carbon Nanotube on the Mechanical Properties of Compatibilized Polylactic Acid/Natural Rubber Blend
Thermal Properties Determination of Polypropylene/Rice Straw Biocomposite Foam via TGA
Study of Thermal Energy Storage Using Oleic Acid
The Thermal Instability Analysis of Functionally Graded Carbon Nanotube Composite Plates Using Finite Element Method
Optimization of Biodiesel Production from Transesterification of Waste Cooking Oils Using Alkaline Catalysts
Influence of Nanoclay on Mechanical Properties of Vinyl Ester/Acrylated Epoxidized Palm Oil Blends
The Effect of Polyvinyl Alcohol (PVA) on the Mix Proportion of Oil Palm Shell (OPS) Concrete
Effect of the Formation of CuO Flowers and SnO2 on the Growth of Tin Whiskers on Immersion Tin Surface Finish
Renewable Coconut Shell Activated Carbon Based for Ethyl Orange Dye Removal
Tensile Properties of Durian Seed Starch Filled Low Density Polyethylene Composites: Effects of Chemical Surface Modification by Acetic Acid
Fe(II) Biosorption Using Pleurotus Spent Mushroom Compost as Biosorbent under Batch Experiment
Effect of TiO2 Mixed CaO Catalyst in Palm Oil Transesterification
Effect of Rubber Seed Oil and Palm Oil Biodiesel Diesel Blends on Diesel Engine Emission and Combustion Characteristics
Mechanical Properties of the ‘Stretchable’ Polyacrylamide-Gelatin Double Network Hydrogel
Evaluation of PCL/GE-Based Electrospun Nanofibers for Tissue Engineering and Drug Delivery Application
Small Scale Pilot Plant Thermal Dryer for Sewage Sludge Dewatering System – A Preliminary Study
Effects of Alkaline Treatments on the Tensile Strength of Napier Grass Fibres
Characterization of In Situ Cu-NbC-VC Nanocomposite by Mechanical Alloying and Microwave Sintering
Effect of Carbon Black Loading on Electrical Conductivity and Thermal Degradation of Poly (vinyl chloride)/Poly (ethylene oxide) Conductive Films
Effect of Cooling and Isothermal Aging on Microstructure Using Electroless Nickel (Boron) Plating
Performance of Home-Scale Incinerator in Releasing NOx and Hydrocarbon Gaseous
Chapter 2: Thermo, Fluid and Flow Research
Numerical Simulation of Forced Heat Convection Turbulent Magnetic Nanofluid Flow in a Square Channel
The Use of Lattice Boltzmann Numerical Method for Prediction of Nanofluid Flow in a Square Enclosure
The Use of Compound Cooling Holes for Film Cooling at the End Wall of Combustor Simulator
Analyzes of Film Cooling from Cylindrical and Row Trenched Holes with Alignment Angle of 90 Degrees at Low Blowing Ratio
Effect of Combination Factors of Operating Pressure, Nozzle Diameter and Riser Height on Sprinkler Irrigation Uniformity
Numerical Prediction of Contaminant Removal from Cavity in Horizontal Channel by Constrained Interpolated Profile Method
Analyzes of Film Cooling Effectiveness from Cylindrical and Staggered Compound Cooling Holes with Alignment Angle of 30 Degree at the End of Combustor
Prediction of Fluid Flow in Artificial Cancellous Bone
Numerical Analysis on Natural Convection Heat Transfer of a Heat Sink with Cylindrical Pin Fin
Numerical Simulation of Nanofluids for Improved Cooling Efficiency in Microchannel Heat Sink
Development of Pico-Hydro Turbine for Domestic Use
The Use of Lattice Boltzmann Method for Particulate Flow Analysis
Computational Analysis of Nanofluids in Heat Exchanger
Computational Investigation of Heat Transfer of Nanofluids in Domestic Water Heat Exchanger
Removal of Contaminant Effectiveness in Cavity Channel Flow with Different Heated Wall Position
Thermogravimetric Kinetic Behavior of Malaysian Poultry Processing Dewatered Sludge (PPDS) during Combustion
Ignition and Burnout Temperature Study of Poultry Processing Dewatered Sludge (PPDS)
Effect of Coolant Temperature on Desalination Process via Progressive Freeze Concentration
Progressive Freeze Concentration of Coconut Water: Effect of Coolant Temperature on Process Efficiency and Heat Transfer
Behaviour of Ice Crystal Growth in a Vertical Finned Cylindrical Freeze Concentrator
Effect of Circulation Flowrate on the Performance of a Spiral Finned Freeze Concentrator
Effect of Viscosity and Heating Temperature on an Intermittent Spray Jet of Starch Dispersion
Use of CFD to Study the Resistance of Sprint Master Canoe
Investigation of Auto-Ignition of Heptane-CNG Mixture in HCCI Engine
Sauter Mean Diameter Profiles of Droplets in a Continuous Spray Stream
Parametric Study on a Thermal Energy Storage Containing Single PCM Sphere
Performance and Emissions of a Micro-Gas Turbine Fueled with LPG/Producer Gas in a Dual Fuel Mode
Numerical Analysis on the Effects of Mixed Convection of Particles Removal Flow over Heated Cavity Using Multi-Relaxation Time Thermal Lattice Boltzmann Method
Effects of Numerical Simulation Geometry on Fluid Solid Particles Interaction Using Multi Relaxation Time Lattice Boltzmann Method
An Equilibrium Model of Dewatered Sludge Combustion Using ASPEN PLUS
Carbonated Water Injection for Recovery of Oil and Wettability Analysis
Jet Impingement Cooling System on the Pressure Side of Turbine Blade
Chapter 3: Applied Mechanics, Mathematical Modelling, Algorithms, Numerical Methods and Simulation
Strong Shielding Interaction Analysis Using J-Integral
Stochastic Homogenized Properties for Honeycomb Microstructure Based on First Order Perturbation
Mathematical Models for Productivity Rate of Automated Lines with Reliability Attributes of Mechanisms
Analysis of Soil Nailing under Earthquake Loading in Malaysia Using Finite Element Method
Modelling of Flow Structure and Pollutant Dispersion in Symmetric Street Canyon
Finite Element Analysis on Brake Disc of an Educational All-Terrain-Vehicle
Computational Analysis of Nanofluids in Vehicle Radiator
The Deformation of Human Eyeball when Undergoing Scleral Buckling
New Phrase Chunking Algorithm for Myanmar Natural Language Processing
Mathematical Modeling on Thermal Energy Storage Systems
Implementation of Ant Colony Optimization Algorithm to Minimize Cost of Turning Process
Model Sensitivity Test of Large Eddy Simulation for Wind Flow and Pollutant Dispersion in a Street Canyon
A Narrative Review of Morphology of Cancellous Bone at Different Human Anatomy - Methods and Parameters
Effect of Surface Roughness Parameters and Surface Texture for Reduced Friction
Calculation of Axial Loads on Columns by Tributary Area Method and Finite Element Method
Variation of Stress Intensity Factor and Crack Distance Length for Double Edge Crack in Human Femur Bone
Numerical Simulation of Stress Shielding Induced by Crack Interaction in Human Phalanx Bone
The Effect of Trabecular Bone on the Mechanical Response of Human Mandible with Implant
rHDPE/Wood Fiber Composites: Effect of Maleic Anhydride on Tensile Properties and Morphology Analysis
Enhancing Rollover Prevention and Vehicle Stability of Heavy Vehicle under Disturbance Effect
Design Studies and Analysis of Single Phase 8S-12P Field Excitation Flux Switching Motor
Dynamic System Modeling of Flexible Beam System Using Multi-Objective Optimization Differential Evolution Algorithm
Experimental Investigation and FE Stress Analysis of Adhesive T-Joint with and without Crack in Fluidization Bed
Analysis of Raft Foundation with EPS Geofoam for Earthquake Resistant
Strength Classification of Aras as Fast-Growing Indigenous Species Timber in Sarawak
Air Flow Analysis in Square Duct Bend
An Initial Study of the Effect of Minimum Quantity Lubricant of SiO2 Nanoparticle with PEG on Surface Roughness during Milling of Mild Steel
Application of Flexural Timber Reinforcement in Light Concrete Beam Structure
FE Modeling and Analysis of Structural Adhesive T-Joint at Elevated Temperature
The Effects of Winding Angles and Elevated Temperatures on the Crushing Behaviour of Glass Fibre/Epoxy Composite Pipes
Physical and Mechanical Properties of Industrial Waste Modified Mortar
Influence of Mortar Incorporating Silica Based Waste Material on the Formation of C-S-H and Mechanical Strength Properties
Determine Aerodynamic Characteristics for FX63-137 Aerofoil by Using Subsonic Wind Tunnel
Mechanical Properties of Epoxidized Palm Oil/Epoxy Resin Blend
Design Parameter to Develop Secondary Flow in Twin Screw Extruder
Study on Influence of Moisture Absorption Strength of Adhesive T-Joint
Stability Condition for Single-Relaxation Time Isothermal Lattice Boltzmann Formulation
Numerical Validation for Wind Flow Field in a Street Canyon under Unstable Atmospheric Condition
Effect of Pressure and Nozzle Angle of Minimal Quantity Lubrication on Cutting Temperature and Tool Wear in Turning
Recent Development on Fracture Analysis of Solder Joints
Review on Pipelines in Offshore Platform Processing System
Numerical Simulation of Stress Change during Wellbore Injection
Specific Properties of Novel Two-Dimensional Square Honeycomb Composite Structures
Evaluation of Palm Stearin as Shaft Lubricant
Aerodynamic Analysis on Proton Inspira by Simulation
The Effect of Binder on Mechanical Properties of Kenaf Fibre/Polypropylene Composites Using Full Factorial Method
New Approach for Fabrication of Auxetic Foam and Determination of Poisson's Ratio
Ageing Effects on Burst Pressure Test of Impacted Glass Fibre Reinforcement Epoxy (GRE) Pipes
Vibration Response Behaviour of Glass Fibre/Epoxy Laminates at Various Volume Fractions
Performance Simulation of Glass Fibre/Epoxy Composite Pipes under Multiaxial Stress Loading
Analysis of Lightweight Concrete “Cakar Ayam” Foundation for Road Construction using Plaxis 3D Foundation Software
Plasticity Behaviour of Sand Matrix Soils
A Study of Soil Stabilization by Hydrated Lime at Kampung Kedaik Asal, Rompin, Pahang, Malaysia
Design of Chassis Frame for All-Terrain Vehicle for Educational Purposes
Wall Thickness Optimization of High Powered Portable Multifunction Air Compressor Tank Using Finite Element Method
Chapter 4: Power and Energy Applications, Electrical Research
Review of Photovoltaic/Thermal System Design and Heat Transfer Enhancement Methods
Modeling of Piezoelectric Acoustic Energy Harvester
Design Optimization of Single-Phase Outer-Rotor 8S-8P Hybrid Excitation Flux Switching Motor for Electric Vehicle
Parameter Sensitivity Study for Optimization of 12Slot-8Pole Three-Phase Wound Field Switched-Flux Machine
Optimization of 6S-14P E-Core Hybrid Excitation Flux Switching Motor for Hybrid Electric Vehicle
Magnetic Flux Analysis of E-Core Hybrid Excited FSM with Various Rotor-Pole Topologies
Performance Comparison and Analysis of (HEFSM) and (FEFSM) Using Segmental Rotor Structure
New Topology of Single-Phase Segmented Rotor Field Excitation Flux Switching Machine for High Density Air-Condition
Analysis of a New Dual Excitation Flux Switching Machine with Outer-Rotor Configuration for Direct Drive EV
An Overview of Waste-to-Energy in Malaysia
Simulation of a Double-Effect Solar Absorption System for Traditional House in Yemen
Review of Analysis on Vertical and Horizontal Axis Wind Turbines
Potential Surplus of Rice Straw as a Source of Energy for Rural Communities in Indonesia
Solar Pumping System for Rural Areas Water Supply in Nigeria
Combustion Characteristics Modeling of Rice Husk as Fuel for Power Plant in Indonesia
Chapter 5: Detection, Measurement, Instrumentation, Assessment
Assessment of Subsurface Profile at SILC, Nusajaya by 2D Resistivity Method
Vehicle Brake Light Detection Using Hybrid Color Model
Feature Extraction of Knee Joint Vibroarthrographic (VAG) Signal Using Statistical Means
Investigation of Lightning Distribution Using LIS Data from TRMM Satellite
Fault Interpretation Using Image Logs
Design and Implementation of Shift Frequency Measurement System for Metal Detector
Estimating the Lengthy Missing Log Interval Using Group Method of Data Handling (GMDH) Technique
