Selected, peer reviewed papers from the 4th International Conference on Civil Engineering, Architecture and Building Materials (CEABM 2014), May 24-25, 2014, Haikou, China
Buch, Englisch, 1726 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 3160 g
ISBN: 978-3-03835-164-1
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Conference Organization
Chapter 1: Structural Engineering
Analysis of Structural Design and Construction Technology of Short-Leg Shear Wall in High-Rise Buildings
Analysis of the Member Buckling Influence to the Stability of Single-Layer Lattice Dome
Analysis on Axial Compression Ratio to Strong Column Weak Beam Effect in Framework Node
Analysis on Switch Node Finite Element of a High-Rise Building
Application of RPC Constitutive Model in FEA
Calculation on Plastic Internal Force of Reinforced Concrete Member under Axial Force
Discussion on Limit Values of Axial Compression Ratio of Steel Reinforced Concrete Columns
Experimental Study on the Ductility of Beams with SIFCON Blocks
Failure Mechanism Analysis of Tubular X-Joint under Lateral Impact Force
Finite Element Analysis of Anti-Seismic Performance of Flange Connection in Circular-Pipe Tower Structures
Finite Element Analysis of the Experiment of PC Pipe Pile with Holes Carrying Capacity
Finite Element Analysis of Unbonded Prestressed Concrete Silos
Frame - Shear Design of Shear Wall Structure
Longitudinal Stress Analysis of Local Compression on the Center of Plain Concrete Column
Multi-Objective Optimization of Composite Elliptical Submersible Pressure Hull for Minimize the Buoyancy Factor and Maximize Buckling Load Capacity
Multiple Cross-Laminated Container Floor Temperature Field Based on ANSYS
Optimal Design Analysis of Composite Submersible Pressure Hull
Optimization of Steel Lattice Trusses Considering Members Stability
Performance-Based Design and Table Test Study on Hybrid Structure Combined with outside Steel Grid and Inner Reinforced Concrete Tube
Pre-Test on the Behaviors of Vertical Prestressed Spacing to Composite Masonry Walls with Holes from the Aspect of Eccentrical Compression
Research on Jack Top-Bracing Platform in the Subway Close-Attached Undercrossing Engineering
Research on Mechanical Behavior of RC Beams Strengthened with CFRP by Anti-Arch Method
Rigid Joints Transferring Forces outside Box Columns with Imperfect Beams – Finite Element Method Simulation
Seismic Performance Analysis of a High-Rise Structure with Multi-Short Columns
Stability Analysis for a Latticed Shell Based on ABAQUS
Stress Analysis of the Rectangular Retaining Wall under Water Pressure Based on Elasticity Mechanics
Studies on Mechanical Behavior of "Box Structure" Residence
Experimental Investigation on Steel H-Beam Prestressed with Externally High Strength Steel Bars
Experimental Study on Flexural Behavior of Typical Mortise-Tenon Joints
Experimental Study on Shear of Reinforced Concrete Beams with High Strength Rebars as Stirrups under Different Shear Span Ratios
Research on the Equivalence and the Mechanical Performance of the Model of Steel-Concrete Joint
Static Finite Element Analysis of Large Liquefied Natural Gas Prestressed Storage Tank
Study on Wind Load about Rotary Reticulated Shell by the Wind Tunnel Experiment
Temperature Distributions of Protected Cellular Beams Heated Three Sides
Temperature Distributions of Protected Cellular Composite Beams Heated Three Sides
Test Study on Size Effect Characteristics of Mechanical Performanceof Pure Bending Plastic Hinge in RC Members
Testing Research is about the Influence of the Diameter of the Bearing Push-Extend Reamed to the Bearing Capability of the Pile of Push-Extend Multi-Under-Reamed Pile
Tests on Shear Studs Using Profiled Steel Sheeting Subjected to Cyclic Loading
The Calculation Method for Moment-Rotation Curve of T-Beam Joints in Semi-Rigid Connections
The Development and Research of Special-Shape Pile
The Elastic-Plastic Time History Analysis on High-Rise Steel Structure about Main Power House of Thermal Power Plant
The Meticulous Analysis of Skew Beam Based on the Space Skew Beam Element Method
The Research for Moment-Rotation Curve of T-Beam Joints in Semi-Rigid Connections
The Research on the Ultimate Bearing Capacity of Soil around the Push-Extend Multi-under-Reamed Pile at Sliding Failure State
Theoretical Analysis on Flexural Behavior of Concrete Members Reinforced by Steel-Basalt FRP Composite Bars
Analysis and Reinforcement on the Up-Floating Accident of the Basement of a Large Commercial Complex
Analysis of Seismic Performance of the Joint of Cellular Steel Column and Steel Beam in Different Axial Compression Ratio
Discussion about the Application of Pre-Stressed Concrete Pipe Pile
Effects of Beam Material Strength on the Seismic Performance of Composite CFST Column and Steel Beam Connection
Finite Element Analysis of Deep Elliptical Submersible Pressure Hull Subjected to a Side-On Non-Contact Underwater Explosion
Finite Element Analysis of Recycled Concrete Filled Circular Steel Tubular Stub Columns under Compressive Loading
Finite Element Analysis of Recycled Concrete Filled Steel Tube in Bending State
Finite Element Analysis of Steel Frame Beam-Column Irregular Joints with a Strengthened External Diaphragm
Finite Element Analysis on Different Axial Compression Ratio of Composite CFST Column and Steel Beam Connection
Influence on Seismic Performance of Joints of Cellular Steel Column and Steel Beam due to the Opening Rate
Mechnical Characteristic Analysis of Separate Lock Chambers
Nonlinear Finite Element Analysis of the Stability of Gravity Platform
Research on Structural Damage Identification of Reticulated Shell Based on Change Rate of Modal Strain Energy and Wavelet Analysis
Seismic Behavior of the Joints of Rectangular Steel Tubular Columns Filled with Steel-Reinforced Concrete and H-Shaped Steel Beam in Different Beam Strengths
Seismic Performance Study on the Joint of Crisscross Concrete-Filled Steel Tube Column-Steel Beam in Different Axial Compression Ratios
Accident Treatment on Plinth Settlement of Monolayer Steel Factory
Analysis of Wind-Induced Vibration Response for a Long-Span Double-Arch-Support Steel Structure
Experiment on Seismic Behavior of Frame with Specially Shaped Columns Used Wide Flange in the First Floor and General on the above
Experiment Study on Deformation Properties of Composite Shear Wall Combined with Cement Formwork and Concrete under Static Load
Experimental Study on Anchorage Performance of Chemical Adhesive Steel Bar in Concrete
Finite Element Analysis on Concrete-Filled Square Steel Tube Short Columns with Inner CFRP Profiles under Axial Compression
Finite Element Simulation on Behavior of the High-Strength Concrete Filled High-Strength Square Steel Tube Middle-Long Columns under Axial Compressive Load
Optimum Design of CFG Pile Compound Foundation Based on Numerical Simulation Method
Research on Safety of High Formwork Supporting System of Fastener-Style Steel Pipe in Concrete Structures
Seismic Performance Evaluation of Steel Frame-Steel Plate Shear Wall Using Pushover and IDA
Study on Fractal Characteristics of Acoustic Emission in Circular Double-Layer Stirrup Confined Concrete
Effects of Braces on Progressive Collapse Resistance of Steel Frame
Experimental Research of Corner Joints in Steel-Framed Structures under Fire Conditions
Experimental Research on the Latticed Intersected Cylindrical Shell Structure
Mechanical Behavior Experimental Study on Lattice Wind Turbine Tower KT-Type Joints of Concrete-Filled Steel Tubular
Non-Linear Analysis of Rheological Effects in Slender Composite Columns
Preliminary Study on the Effect of Loading Rate on Bond Property between Corroded Concrete and Steel Bar
Study on Dynamic Calculation Method of Anti-Slide Pile
Finite Element Method of Corner Joints in Steel-Framed Structures under Fire Conditions
Influence of High Mode Effects on Ductility Reduction Factors for MDOF Shear-Type Structures
Numerical Simulation of Prefabricated Frame-Shear Wall Structure with Keyway Connection of the Column to Wall under Unidirectional Horizontal Load
Research on Connection Method and Mechanical Performance of Column-Wall Subassembly without Keyway under the One-way Horizontal Load in Precast Frame-Shearwall Structure
Wind Tunnel Test on Wind-Induced Aerodynamic Force of Transmission Tower
Wind-Induced Dynamic Analysis of Rung-Shape Long-Span Tensile Cable Membrane Structure
An Experimental Evaluation of Development Length of Reinforcements Embedded in Geopolymer Concrete
Analysis of Structural and Non-Structural Problems by Coupling of Finite and Infinite Elements
Buckling Analysis of Single-Layer Reticulated Shells
Calculation and Analysis of Composite Wall Frame by Finite Element
Compressive Strength of Artificial Sand Recycled Concrete with Different Content of Stone Powder
Computing Method Based on Compound Boundary Conditions for Short Cable Force
Design of Concrete Voided Slab of Highway Bridge Pretensioned with CFRP Tendons
Dynamic Characteristic Analysis of Prefabricated Houses of Light-Weight Steel Structure
Experimental Study on the Mechanical Behavior of Truncated Hip Structure
Finite Element Analysis on Temperature Field of Inorganic Polymer Concrete Pouring Process
Finite Element Modelling for Lateral Behaviour of Infilled RC Frames with Openings
Improvement of Impact Resistance of Synthetic Macro-Fiber Reinfored Concrete
Numerical Analysis of the Influence of the Padding-Plate on the Extended End-Plate Connection
Numerical Simulation Analysis of Mechanical Properties of Square Steel Tubular High-Strength Concrete Inner Set CFRP Round Pipe Flexural Members under Reciprocating Loads
Optimization Design and Elastic Analysis on Shell Type Foundation for Wind Turbo-Generator
Progress in Study on Elastic-Plastic Time History Analysis of Tall Building
Research and Engineering in the Design of Building Walls
A Shape Optimization Based on Strain Energy for Framed Structures
Analysis on Structural Problems in Building Decoration
Comparative Analysis of Different Modeling Methods for Sandwich Plates Based on LS-DYNA
Effects of Shape Parameters on Deformation Characteristics of Carrier Pile
Experimental and Theoretical Studies On High-Rise Building Structure With New Special-Shaped Shear Walls
Experimental Research on Integral Structures of Mobile Steel Buildings
Interaction Analysis of Infilled Frame Structures under Lateral Loads
Methods for Determination of Residual Mortar Content Adhered to Recycled Aggregate
Resist the Wind Load of Jacking System in High Buildings
Restriction Effect of Structural Steel to Ultra High Strength Concrete in the Joint Core Area
Strength Degeneration of SRUHSC Column to RC Beam Joint Subjected to Reversal Cycle Load
Study on the Analysis and Pre-Control Technology of Vertical Deformation in Construction Process of the Super High-Rise Steel-Concrete Composite Structure
Study on the Wind-Induced Control of Tensile Membrane Structure
The Study on the Temperature Effect on Steel Reinforced Concrete Girder of Transfer Story in the Construction Process
Thermal Buckling Analysis of Cyclic Symmetry Mounting Structure
Ultimate Bearing Capacity Analysis of Oblique Beam System Supported by Knee Brace
Wind Load Analysis of Large Temporary Stand with Variable Upwind Structure
A Joint of Ceramic Granite Mount by Threaded Anchor Studs in a Suspended Ventilated Facade
Analysis of Influencing Factors on Mechanical Behavior of Laminated Slab with Shear Connectors with Four-Terminal Fixed Constraints
Analysis of Influencing Factors on Outer Annular-Stiffener Type Steel Castellated Beam-Concrete Filled Steel Tuber
Analysis of Static Strength for Tubular Joint Reinforced with Collar Casing Pipe
Analysis on Creep Characteristics of PC and RC Cylinders with Different Loading Ages
Application Research of In Situ Axial Compression Method on Brick Masonry
Calculation of Cross Beam in Continuous Box Girder Bridge Based on Modified Shear Method
Characteristic Analysis of Prestressed Concrete Frame Joints with Spread-Ended Beams
Comparison Analysis of Evaluation Criterions for Vibration Serviceability Induced by Wind Load
Computational Method on Axial Tension of Secondary Loaded RC Members Strengthened with Carbon Fiber Reinforced Plastic Sheets
Contrast Analysis about the Result of Static Load Test and High Strain Testing for the Bearing Capacity of Screw Pile Foundation
Contrastive Research on the Influence of Eccentricity for Autoclaved Fly Ash Solid and Perforated Brick Masonry
Design of a Suspended Ventilated Facade with Composite Facing
Design of Fastening Tube High-Formwork Supporting System
Dynamic Stability Analysis of Functionally Graded Plates Subjected to Complex Loads
Experimental Study of Bending Properties of CFRP Bars Concrete Beam and Crack Analysis
Failure Modes-Based Searching and Optimizing of Steel Reinforced Concrete Frame Structures
Finite Element Analysis of Concrete-Filled Rectangular Tubular Frame
Finite Element Analysis of Friction Coefficient on Recycled Concrete Wall-Beam Interface
Finite Element Analysis on Steel Frame Structure of Mobile Buildings
Force Behavior of Parallel Double Coupling Beams with Different Width
Influencing Factors Analysis on Comfort of New-Type Precast Assembly Diaphragm
In-Plane Stability Bearing Capacity of Variable Section Column
Management Practice for Steel Structure Work of the Wide Span Aerial Corridor in Tobacco Construction Project
Mechanical Behavior Research on the Double Angle Bolts Tube-Plate Joints of Concrete-Filled Steel Tubular Lattice Wind Turbine Tower
Node Additional Bending Moment's Influence on Plane K Shape Steel Tube Tubular Joint Ultimate Bearing Capacity
A Kind of Swinging Bumper in the Rear of a Truck and its Performance Research
A New Kind of Modular Assembly Steel Structure System
Design and Application of Rock Bolt Foundation in Mountain Cable Crane
Numerical Simulation on the Mechanical Performance of the Wind Generator Latticed Concrete-Filled Steel Tubular Tower
Numerical Study of Damage Model for Reinforced Concrete Beam under Complex Boundary Condition Subjected to Air Blast Load
Numerical Study of Damage Model for Reinforced Concrete Slab under Complex Boundary Condition Subjected to Air Blast Load
Pile Foundation Antifreezing Measures Research in Seasonal Frozen Soil Region
Preliminary Analysis of Concrete Filled Steel Tube Reinforced Concrete Columns under Axial Compression after Exposure to Fire
Prestressed I-Beams Made of Ultra-High Performance Concrete for Construction of Railway Bridges
Progressive Collapse Analysis of CFST Frame with Semi-Rigid Connection
Research and Application on the Movable Protective Frame Scaffolding in the Overpass Demolition Work
Research Progress on Wind-Resistant and Seismic Performance of Glass Curtain Wall Supported by Plane Cable Net
Chapter 1: Structural Engineering
Simulation Research for Bar-Type Composite Wall under Certain Bias Loads
Single Beam Load Test of Continuous Beam
Study on Seismic Behavior of Joint with Exterior Diaphragms between Concrete-Filled Square Steel Tubular Column and H-Type Steel Beam
Study on Wind Load Characteristics of a Super Tall Building Based on Numerical Simulation
The Best Position to Determine the Hinge in the Cantilever Bridge
The Connection Form of the Beam and Column in Prefabricated Concrete Structure
A Refined Theory of Moderately Thick Plates According to Exposition of the Classical Technical Theories, Theoretical Aspects
Analysis on Bearing Wall with Opening Transfer Beams Subjected to Vertical Loads
Analysis on the Seismic Performance of RC Frame Beam-Column Joints Strengthened by Sprayed FRP
ANSYS-Based Study in the New Composite Beam for Effective Flange Width
Research of the Influence of Snow Load Distribution Factor on Mechanical Performance of Portal Frame
Study on the Structural Dynamic Characteristics of Sand Washing Tower Based on ANSYS
Study the Structure of the Vibration Characteristics of Sand Washing Water Tower Based on ANSYS
The Finite Elements for Design of Frame of Thin-Walled Beams
The Influence of Slab on Yield Mechanism of RC Frame Structure
The Research of Box Beam Warping Displacement Function
The Research of Gantry Crane Girder Damage Problem by Modal Analysis Method
Research on Dynamic Characteristics and Response of Double-Tower Connected Structures
Numerical Study on the Static Response of Grouting-Sleeve Reinforcement-Connection Component with Different Sleeve-Rib Space
Seismic Response of Ductile Cast Iron Buried Pipeline with Socket Joint
Free Vibration of Shallow-Spherical Shell
The Temperature Stress Analysis and Design of Changge Stadium Body Structure
Thermal Responses of a Thin Plate under Periodic Heat Flux Oscillation
Parametric Modeling and Stability Analysis of Temporary Grandstand
Study on the Static Performance of Sand Washing Tower Based on ANSYS
Numerical Modeling Research of Rectangle Pipe-Jacking Construction
Mechanical Plate-Shell Structure Vibration Analysis Based on ANSYS
Numerical Analysis and Calculation of Internal Forces of Steel Box Continuous Girder Bridge Construction Process
Nonlinear Numerical Analysis of Transfer Column in SRC-RC Hybrid Structure
An Improved Method of Bridge Finite Element Model Update by Stepwise Regression
Cracking Simulative Analysis of Reinforced Concrete Columns with ANSYS Software
Limit Analyisis of Frame Structure Based on the Elastic Modulus Reduction Method
Space Stability Analysis of Inclined Thin-Walled Steel Box Ribs
Elasto-Plastic Mechanical Behavior of Steel Box Stub Column under Cyclic Uniaxial Tensile and Compressive Load
Reasonable Strength Criterion Research of High Arch Dam Based on Brittle Failure Constitutive Relation
Analysis and Experimental Study on Mechanical Performance of the Extruded Forming Channel Type Embedded Part
Semi Empirical Equation for Peak Shears Strength of Rectangular Reinforced Concrete Walls with Aspect Ratio Less or Equal to One
Chapter 2: Monitoring and Control of Structures
About Test Methods of Corrosion State of Reinforced Concrete Structures
Analysis on the Nondestructive Testing Method of Concrete Strength
Analysis to Causes of Concrete Transfer Crossbeam Cracks in the Basement
Autoexcitation-Based Accelerometer Array for Interface Separation Detection of Concrete-Filled Steel Tubular Arch Bridge
Coupled Vibration Control of Tuned Mass Damper in Both Horizontal and Torsional Direction
Cracking Analysis and Reinforcement Method for a Thin-Wall Plain-Concrete Pier
Design and Experiment of the Frictional Sensor for Underground Structure Monitoring
Impact on Ultrasonic Level Test Method of Concrete Crack Depth
Research for Structural Damage Identification Method Based on Stable Time Series and Principal Component Analysis
Research on Recognition Methods of Crack Damage from Beam Based on the Vibration Modal
Structural Damage Detection Based on Ridge Estimation Method
Study on Damage Identification of Simple Beam Bridge Based on the First-Order Curvature Mode Ratio
Study on Strain Transfer of Substrate Encapsulation FBG Strain Sensor
The Defect Diagnose Method of Piles with Lateral Excitation Based Wavelet Transform
The Defect Diagnosing Method of Existing Bridges Based on Acceleration Responses
Accuracy Enhancement of Videogrammetrey for Structural Dynamic Displacement Measurement with Adaptive Filtering
Optimal Wavelet Basis Selection for Wavelet Denoising of Structural Vibration Signal
Health Monitoring System Design of Coastal High-Piled Wharf
Optimal Sensor Placement Based on Tabu Search Algorithms
Structural Damage Identification Based on Dynamic Analysis of the Scale Model
Application Study on GPS Positioning Technology for Gravity Wharf Deformation Monitoring
Grid Structure Damage Location Base on Cross-Correlation Function
Ultrasonic Cleaning Device with Adjustable Power for Submerged Structure
A Two Step Damage Prognosis Method for Beam-Like Truss Structures
Damage Identification of the Arch Bridge Based on the Difference of Deflection with Moving Load
Optimization Study of Stepwise Regression and Partial Least Squares Regression Models for Dam Security Monitoring
Experimental Research of Rebound Detection in Steel Fiber Concrete
Study on Probabilistic Identification Method of Structural Physical Parameter Based on Bayesian Estimation
Study on Self Judgment of Location Lave Speed of Acoustic Emission on Concrete Members
Study on Structural Damage Detection Using RBF Network
The Establishment of Ultrasonic-Rebound Curve in Steel Fiber Concrete
The Monitoring Method for Crack Damage of Concrete Structures Based on Piezoceramics Transducers
A Bridge Health Monitoring System Based on Wireless Smart Aggregates
A Study on Steel Fiber Influence to Rebar Corrosion in Concrete
Acoustic Emission in Protected and Non-Protected Concrete During the First 24 Hours
Application of Frequency Ratio in Structural Damage Detection
Construction Monitoring Method of Gui Dan Intercity Bridge in Guang Zhou
Integration, Application and Analysis of the SHM System for Continuous Rigid Frame Bridge
Application of Health Monitoring Technology in Steel Structure Engineering of Jinan Olympic Sports Center
Estimation of Overall Reliability for Zero-Failure Batch Production Monitoring Instrument Based on E-Bayes Method
Health Monitoring Technology in Steel Structure Engineering of Jinan Grand Theatre Concert Hall
Non-Structural Cracking Analysis of Early Age of Basement Structure Based on Field Monitoring
Parameter Identification for Underground Powerhouse of Pumped-Storage Power Station Based on ARMA Time-Series Model
Safety Control and Site Monitoring on High Formwork Support System of Fastener-Style Steel Pipe
Study on Damage Identification of Simply Supported-Beam Based on Modal Strain Energy Method
Wind Tunnel Test of Tall Buildings with Irregularities of Elevation
Research on the Application of Information Technology in the Dynamic Monitoring of Masonry Structure
Vertical Deformation Prediction Method for Bridges Based on Grey System-BP Neural Network Model
Crack Identification of Plane Frames Based on Wavelet Transform of Rotation Modes
Damage Detection Method Based on Fractal Correlation Dimension for Steel Truss Structure
Damage of Basement and Foundation under Low-Temperature Environment and its Analysis
Crack Control Technology for Concrete of Super-Large Section Precast Immersed Tube
Vibration Test of Hangzhou East Railway Station under Pedestrian Load
Experimental Study on Behavior of the Channel-Masonry-Concrete Composite Structures
Identification and Treatment Suggestion of a Building Safety
Reinforced Grouting Material Member Force Performance Research
Experimental Study on Reinforcement of Failure Reinforced Concrete Beams
Experimental Study of CFRP Reinforced Concrete Beams
Finite Element Analysis of the Influence of Weld Size on the Combined Connection with Bolts and Welds
Investigation Study of Damaged Factors of Brick Structure Buildings in ZhengZhou
Research Progress and Overview of Pile Foundation Model Test
Application of Digital Speckle Correlation Method in Observation of Conrete Micro-Crack Damage
Study on Influence of Freeze-Thaw for Chlorion Penetration
To Explore the Causes and Prevention of Cracks in Brick Masonry
Cable Corrosion Analysis and Damage Monitoring
Strain Measuring Techniques of the Geogrid
Dynamic Characteristics Test and Analysis of Long-Span Cantilevered Floor Systems in Shenyang Culture & Art Center
Chapter 3: Structural Rehabilitation, Retrofitting and Strengthening
Experimental Study on Fatigue Stiffness of RC Beams Strengthened with CFL under Variable Amplitude Overloading
Several Common Methods of the Old Bridge Reinforcement
Simulation Analysis on Shear Behavior of RC Beams with Near-Surface Mounted GFRP Bars
Strengthening Design of an Existing Old Masonry Building
Study on Flexural Performance of RC Beams Strengthened with Bonded Prestressed CFL
Study on Cracking Load of Normal Section for Concrete Beams Strengthened with BFRP Sheet
Study on Punching Resistance of Slab-Column Nodes Strengthened with CFRP Sheets by Nonlinear Finite Element Methods
Finite Element Analysis on FRP Retrofitted RC Frame Structure Progressive Collapse Performance
Experimental Study on Cracking Load and Ultimate Load of Masonry Walls with Window Openings Strengthened with Sprayed GFRP
Seismic Isolation Retrofit of an Office Building Using Friction Pendulum System
Study on the Calculation Method for Flexural Capacity of Pre-Stressed Concrete Hollow-Core Slabs Strengthened with CFRP
Application of Carbon Fiber Reinforcement Technology in Humidity Environment for Weave and Power Plant
Chloride Penetration and Aging Behaviors of Surface Protected Concrete with Silicone Material
Contrastive Analysis on Hinge Joint Reinforcement Measures of Hollow Plate and Deduction Design Parameter
Experimental Tests on Strengthened Masonry Vaults
Nonlinear Finite Element Analysis on Shear Bearing Capacity of Masonry Wall Strengthened by SGFRP
Seismic Evaluation and Strengthening Design for a Historic Structure
Experimental Study and Recommendation on Concrete Cover Thinkness of GFRP
Research for Project on Adding Layer of Building
The Application and Research of Performance-Based Fire Protection Design on Reconstruction Project
Experimental Method of Corrosion Fatigue Behaviors for Steel Strand under Corrosive Environment and Cycle Loading
Cement-Free Mortar Using Ground Granulated Blast-Furnace Slag with Different Alkali-Activators
Propagating and Reconstructing Cracks in 3D in Cement-Based Materials
Chapter 4: Reliability and Durability of Structures
Comparison of Monte Carlo Simulation and Response Surface Method by Using ANSYS PDS
Effectiveness of Amino Alcohol-Based Corrosion Inhibitor and its Influence on Concrete Properties
Reliability Analysis of Offshore Structures with Consideration of Seasonal and Directional Effects
Research for Computing the Structure Reliability Index
The Research on Computation of Researchers Certainty Factor of Bridge's Durability Evaluation Based on the Indeterminate AHP
Simulation on Composition and Mechanical Properties of Concrete
Analysis of Concrete Corrosion and Damage Mechanism under the Actions of Multiple Salts and Dry-Wet Cycles
Application of SAP2000 API and.NET Framework for Reliability Assessment of RC Structures
Revision for Concrete Members Crack Control Criteria Based on Durability Demand
Analysis about Isolation Effect for Mega Frame with Rubber Bearing
Effect of Different Environments on Durability of PPF Concrete
Influence of Splitting Load and Polypropylene Fiber on Permeability of Chloride Ion in Concrete
Analysis of the Implied Reliability Index and Load and Resistance Coefficients for China’s Current Highway Bridge Load-Carrying Capacity Evaluation Code
Experimental Study and Analysis of the Structural Behavior of Steel-Concrete Composite Beam after Shear Connector Corrosion
Modelling Pore Structure of Cement Based Material According to Continuous Network System
Non-Probabilistic Reliability and Slope Stability Analysis
Reliability Assessment for the Balanced Cantilever Construction Phases of Super Long-Span Cable-Stayed Bridges with Steel Box Girder
Seismic Fragility Analysis of Hill Buildings Sited on Slopes
Study on Mechanical Properties of Corroded Reinforced Concrete Using Support Vector Machines
The Method Research for Appraisal of Reliability of Existing Lightweight Steel Structures
Device for Time-Varying Mechanical Performance of Columns under Coupling Effects of Load and Environment
Ultimate Strength Analysis of Open Box Girders under Bending Moment and Lateral Pressure
Out-of-Plane Stability Analysis of Plane Tubular Trusses
Bending Strength Calculation without Axial Force in Case of Annular Section
Variational Criteria for Critical Levels of Internal Energy of a Deformable Solids
Analysis on Safety Assessment of Reinforced Concrete Members
Study on the Structure Safety Appraisal of Sluice Frame Structure on the Yellow River
Deformation Behavior of Corroded Steel Bar Based on Viscoelastic Theory
The Research on the Stability of the Steel Tube Filled with Steel-Reinforce Concrete Subjected to Axial Compression after High Temperature
