Buch, Englisch, 3670 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 6800 g
ISBN: 978-3-03785-370-2
Verlag: Trans Tech Publications
Autoren/Hrsg.
Weitere Infos & Material
Preface, Sponsors and Organizing Committees
Chapter 1: Surface Engineering/Coatings
Anodic Behavior of Copper in 1-Hydroxyethylene-1, 1-Diphosphonic Acid (HEDPA) Baths
Real-Time Generation of Cutter Location Curves for Pen-Cutting of Sculptured Surface
Accelerated Fatigue Life Testing of Nicr-Cr3C2 Coating at Different Loads under Rolling Contact Condition
Investigation on Thermal Oxidative Stability of Coolant and Lubricant of Magnesium Alloy in Rolling Process Using TG–DSC Analyzer
Minimum Zone Evaluation of Flatness Error Using an Adaptive Iterative Strategy for Coordinate Measuring Machines Data
Plasma Nitriding of 20CrMo Steel with Nanostructured Surface Layer
An Artificial Immune System Approach to Business Process Mining
On Enterprise Operation Efficiency and Strategic Research Based on Super-efficient DEA
Influence of the Deposition Temperature on the Properties of Medium-Frequency Magnetron Sputtering WS2 Soft Coated Tools
Effect of Surface Pretreatment on Morphology and Microhardness on Carbon Coating Using PVD
Experiment on the Anti-Blocking Technology in No-Tillage Wheat Seeding
Predicition of GRT Fiber-Rubberized Haydite Concrete Compressive Strength Based on Multiple Regreeion Analysis and BP Neural Network
Modifing PET Fabric Surface with Peanut Protein
Characteristics of Electroless Nickel-Phosphorus-Potassium Titanate Whisker Composite Coating
Design, Generation and Bending Stress Analysis of Face-Gear with Curvilinear Shaped Teeth
Investigation of the Effect of Process Parameters on Surface Roughness in Wire EDM of Titanium Alloy
Application of Crab Shell Chitosan on Nonwoven Wool
Morpholog and Conductivity of High-Solid Content Waterborne Polyurethane Dispersions with Sulfonated Polyol and Carboxylic Polyol as Compound Hydrophilic Chain Extender
A Temperature Control System Design Using Integration Network
Deterministic Model and Genetic Algorithm of Joint Inventory Control for Virtual Logistics
Preparation of Carbon Fiber/MoS2 Core-Shell Structure by Surface Modification and Precipitation Process in Aqueous Solution
Minimum Norm Multidimensional Scaling Solution for Mobile Station Localization in Wireless Sensors Network
Effect of Carbon Black Pigment on the Surface Resistivity of the Black Silicone Thermal Control Coating
Optimized Tool Path Planning for Five-Axis Flank Milling of Ruled Surface Considering Tolerance
Electroless Sn Deposition on Magnesium Alloy and Wastewater Treatment
Conformal Geometry Solitons
Effect of Passivation on Pitting Corrosion of 316L Stainless Steel in Concentrated Seawater
Milling Parameter Optimization Based on Control of Aluminum Alloy 7475 Surface Roughness
A Novel Electrodeposited Ni-Cr-Al Nanocomposite with Improved Oxidation Resistance
Comparison of Hot Corrosion Resistance of YSZ and CYSZ Thermal Barrier Coatings in Presence of Sulfate-Vanadate Molten Salts
Multi-Level Recommendation for Sketch Based 3D Toy Modeling
Effects on Corrosion Resistance of Ce-Sealed Ni-P Coatings with Ni-Low P and Ni-Medium P
Preparation and Photocatalytic Activity of Ag-TiO2/CNT Photocatalyst
Correlation of Surface Alloyed Microstructure of Pure Magnesium With its Corrosion Behavior
Microstructure Characteristics of Fe-xCr-C Hardfacing Alloys
Fault Modeling for Electro-Hydraulic Servo System Based on Hybrid System
Remote Monitoring System of Textile Equipments Based on ZigBee Technology
Application of Low-Frequency Energy Increment Technology in Hydrocarbon Prediction
Finite Element Simulation for TGO Instability with Crack Propagation under Thermal Cycling Based on Modified COD Criterion
Dynamic Modeling of Continuum Flexible Leg System for Micro Robot
Effect of Magnetic Field on the Electropolymerization and Corrosion Properties of Polyaniline (PANI) Film
Emulation and Prediction of the Cold Roll Forming Force
Research and Development of the Porthole-Die Aluminium Alloy Extrusion Processes
Aviation Pipe Connection Fit’s Contact FMA and its Structure Modification
Analysis of Dynamic Responses of Pipe Vibration in Chemical Ship
Framework of Saving and Intensive Land Use System in Chongqing: A View of Urban-Rural Integration
Improvement on Microstructure and Cracking Susceptibility of Laser-Clad Ni-Based Layers by In Situ Generation of Tantalum Carbides and Borides
Investigation of Thermal Shock Behavior of Plasma-Sprayed NiCoCrAlY/YSZ Thermal Barrier Coatings
Copper Ultrasonic-Electrodeposition on Zn Alloy in Alkaline Bath Containing 1-Hydroxyethylene-1,1-Diphosphonic Acid
Gibbs Free Energy Calculation of Al-Cu Alloy Using Thermo-Calc Software for Microstructure Simulation
Lattice Boltzmann Simulation on Solid Oxide Fuel Cell Performance
Design and Implementation of High-Voltage Plasma Cleaning Technology for Auto Lamps
Influence Analysis of Coupled Neutronics and Thermo-Hydraulics on Steady-State Characteristics of Supercritical Water-Cooled Reactor
Research and Implementation of Project-Driven Teaching on C51 Programming
Properties of Electrospark Deposited Cr Coatings on AISI H13 Steel
Make WPC Products More Beautiful by Secondary Processing
Microstructure Analysis of TiC Reinforced Fe-Based Composite Coating by Plasma Cladding
Damage Study of 22Cr2Ni4MoVA Steel in Artificial Crystal Growing Environment
Process Study on Prepared Al2O3-TiB2 Composite Coating by Reactive Spray
Preparation of Ni-Base Alloy Coatings on Monel Alloy by Laser Cladding
Registration of 3-D Shape with Free-Form Surface Using Imageware and Genetic Algorithm
Fabrication of Semisolid Billets of Hypereutectic Al-Si Alloy by Severe Plastic Deformation and Remelting
Granite Step Gauge: A New Device for Error Measurement on CNC Machine Tools
Determination of Residual Stress and Strain-Hardening Exponent Using Artificial Neural Networks
Study Effect of Deflection on the Progress of Cracking in Aluminum with Different Heat Treatment
Control, Effection and Analysis of Voltage during Dielectric Barrier Discharges Plasma Surface Treated Carbon Fibers
Analytical Study on Mechanism of Electrolysis and Plasma Polishing
Elimination Technology of the Iron Dissolved in Flux Solution of Hot Dip Galvanizing Process
Design for Underwater Self-Propelled Model System
Research and Development of High Reflection Infrared Radiating Coating Adopted on Ceramic Kilns
Development of the Iron Elimination Technology of Acid Cleaning Solution of Hot Dip Galvanizing Process
Analysis of the Drive of 01N AT Based on the Lever Method
Design of FANUC System Human-Machine Interface and Machine Realization Based on C Language
An Application of New Approach for Dynamic Orders Selection to Maximize Restaurant Operational Profits
Evaluation of Water Cooling System of 1.5MW Rotor Based on CFD
Effect of Cavitation on Tribological Performances for Textured Surfaces
Hot Corrosion Behavior of NiCoCrAlYSiHf Coating Deposited by Arc Ion Plating
Chapter 2: Modeling, Analysis and Simulation of Manufacturing Processes
3D Numerical Simulation Research on the Effect of Gate Location on Fiber Orientation and Injection-Molded Parts Deformation
Effect of Rare Earth Metals on Inclusions and Impact Property of 2205 Duplex Stainless Steel
Fatigue Life Analysis and Structural Optimization of Drive Axle Housing Based on FE-SAFE
Formation of Mesophase Spheres in a QI-Free Coal Tar Pitch
Evaluation of Volatile Organic Compounds from Asphalt Using UV-Visible Spectrometer
Based on the CAM Error Prediction Research of BP Neural Network
Fine Particles of Rubber Cutting Machine Designed to Explore
Evaluation of Different Factors in Implementation of JIT Production System by Applying Simulation and Entropy Weighting Method
Applying Deformation Resistance Estimation Method to Predict Nine Stand Hot Strip Mill Rolling Force
Finite Element Analysis of Grinding Temperature Field with Water Vapor as Coolants
Asymmetry-Induced Supramolecular Helices of Pyrene-Perylene Bisimide Triads
Brief Analysis of Uyghur Folk Carpet
Building Energy-Saving Technology
Application in Avionics Anomaly Detection Using Multi-Variant Hotelling T2 Statistics
Geometrical Springback Compensation Algorithm Based on UV Curves for Automobile Structure Parts Die-Face
Experiment Study of AGV Navigation Based on Multi-Sensor
Dynamic Research of Knitting Element for Computerized Flat Knitting Machine Based on ANSYS/LS-DYNA
Finite Element Analysis on Directional Solidification of Al-Ni-Co Alloys
Effect Mechanism of Elliptic Vibration Assistance on the Cutting of Brittle Materials
Industrial Process Modeling Based on Online Learning Algorithm for Regression Least Squares Support Vector Machine
Johnson Cook Material Model and Simulation Experiment of Aluminum Alloy 6005A
Effect of Additive La2O3 on Synthesizing Diamonds Using Pure FeNi Powder Catalyst
Drying Model and Moisture Diffusion Coefficient
An Investigation into Sidings Allocation Strategy for Automated Container Terminal Based on A* Search Algorithm
A Selective Reduced Integration 8-Node Hexahedral Element by Assumed Strain for Coining Simulation
Characters of Lorenz Force Generated by a Single Linear Electromagnetic Stirrer
Calculation of the Mixing Entropy of Sn in a Tin-Iron Bilayer
Experiment and Meso-Damage Finite Element Analysis of Uniaxial Tension of Galvanized Steel Sheets
A Geometric Error Identification and Simulation Method Based on Laser Tracker for Large-Scale Multi-Axis NC Machine Tools
A TiO2/Fe3+ Coated on Fibre Glass Treatment for Phenol with UV Irradiation
Effect of Shrinkage Reducing Admixture on Properties of Pumping Concrete
Compressive Strength and SEM Observations of Geopolymers Reinforced by Carbon Fibers, Polyacrylonitrile Fibers and Cellulose Fibers
Finite Element Analysis and Optimum Design of Octagon Horizontal Type Vacuum Tank
Effect of Low Content Ca on the Microstructures and Mechanical Properties of AZ63 Alloys
An R&D Project Dealing with Mechanical Bits and Pieces in Real Option Analysis
Distribution of Carbon in Large Diameter Semi-Insulating Gallium Arsenide Grown by Liquid Encapsulated Czochralski Technique
Fatigue Life Prediction of Composite Laminate
Chapter 3: Materials Forming
Technique of Line-Carved Relief Editing Based on Mesh Feature Operations
Discuss of Bonding Mechanism of Al-Phosphate No-Bake Sand
Characteristic Part Family and Similarity Retrieval Mechanism for Product Variant Design
Study on Increasing Strength of Silkworm Silk
Tribological Properties and Wear Mechanism of Copper-Graphite Composite
Experimental Study on Adhesion of Oxide Scale on Hot-Rolled Steel Strip
Nonlinear Vibration Characteristics Analysis of CNC Machine Tool Feed System
A Multi-Resolution PID Controller Based on the Wavelet Transform
Anti-Blocking Technology for Urban Sewage Source Heat Pump System
Analysis on the Upholding Bracket for Bridge Fabricating System & the Building of its FEM Model
Research on Deep Drawing with Multi-Point Variable Blank-Holder Force Controlling by Computer
The Applications of Vacuum Drying Technology in the VIP Core Material’ Pre-Treatment
Left-Side of the Forming Limit Diagram (FLD) under Superimposed Double-Sided Pressure
A Rack-and-Pinion Pumping Unit Design
Friction Behavior under Different Forming Speed for Sheet Metal Forming
A Research of Vibration Signal Processing of Air Suspension System
FEM Simulation of Different Loading Pressures on T-Tube Hydroforming
Plastic Forming Technology of Precision Tube
The Application of SolidWorks in Bridge Erecting Machine’s Structure Design
Analysis of Edge Cracks in Hot Rolled Aluminium Alloy Sheets Contained of Magnesium for Can Usage
The Structure Improvement Design of Turbodrill Diversion Liner
Study on Precision Forging Schemes of Hypoid Driving Gear
Microstructure and Properties of Ti6Al4V Alloy Prepared by Hot Isostatic Pressing
Analysis on the Twinning of FCC Metals by EBSD
Effect of Warm Deforming and Heat Treating on Microstructure and Mechanical Properties of Mg-Zn-Zr Magnesium Alloy
Calculation of Chip Removal Air Volume of Blasthole Drill
Analysis of Radial Strain Distribution in the Metal Spinning Process by Taguchi Approach
Preparing Large Sized Billet of High Strength Aluminum Alloy with the Application of Low Frequency Electromagnetic Field
An Investigation of Several Nb-Ti-Al Based Alloys on Microstructure
Numerical and Experimental Approach for Incremental Thread Rolling Process of Micro-Sized Screws
The Influence of Compressive Pressure in the Thickness Direction on Spring-Back for Aluminum Alloy
Effects of Technical Parameters on Initial Silicon Melting in Round Cold Crucible Continuous Casting
Manufacture of Hollow Cross Sectional Regenerated Cellulose Fiber Using HWM Spinning Method
Research on Microstructure and Electrical Resistivity of Injection Molded Metallic Fiber-Filled Polymer Composites
Design of Steering Wheel Control System of Tracked Vehicle of Hydro-Mechanical Differential Turning
Nonlinear Analysis of I-Shaped Short Pier Shear Wall with Concealed Bracings
Prediction of Effective Material Property of Tailor Welded Blanks for Air Bending Process
Study of Solid/Liquid Interface of Ti46Al0.5W0.5Si Ingot Directionally Solidified by a Near-Rectangular Cold Crucible
Effects of Parameters on the Stability of Silicon Melt Pool in Cold Crucible Continuous Casting
Analysis on Processing Boundary of Stepped Shaft during Cross Wedge Rolling Process
Formability Predictions of Deep Drawing Process for Aluminum Alloy A1100-O Sheets by Using Combination FEM with ANN
Morphology and Tensile Behavior of 2024 Al Alloy Objects Fabricated by Uniform Droplet Spraying Deposition
Finite Element Simulation and Analysis on Folding Defects of Inner-Grooved Copper Tubes
Research of Automobile Engine Fault Diagnosis Based on Wavelet Packet
Research on Power Properties of Vibration Ball-Medium Reactor in Transesterification for Polycarbonate (PC)
Study of Large Castings Lost Foam Online Non-Contact Detection
An Accurate Calculation of the Elongation of Strip in Tension Leveling Process
Finite Element Analysis of Formability of Aluminum Alloy Double-Curved Panel by VPF
Lightweight Structure Design of Refuge Chamber
Design and Dynamics Simulation of a Micromachined Inertial Switch with Polymer-Metal Composite Fixed Electrode for Flexible Contact
Geometrical Description of Two-Dimensional Optimization Design Model
Stresses Unified Solution for Wire Forming Based on Unified Strength Theory
New Hybrid Desalination Design and Modeling
Research on Carbon Fiber Reinforced C/Cu Composites
Chapter 4: Materials Machining
Vibration Characteristics Analysis of a High-Speed Horizontal Machining Center
Analysis on Grinding Force of SiCp/Al Composites Based on MATLAB
Design of Electrocircuits for Ultra-Precision Positioning Platform
Analysis on the Individual Stiffness of the Aerostatic Guide Way and Error Sources of its Vibration
Statistical Analysis of the Roundness Error Data
Electrochemical Machining Technology and its Latest Applications
The Study on Spectral Imaging Technique in Detection of Dermatosis
Design of New Small Hydroelectric Device
Research on Process Parameter Effects on Surface Roughness and Subsurface Damage in CMP of Single Crystalline Silicon
Variance Distribution and Energy Featured Non-Subsampled Contourlet Texture Retrieval
Influence of Friction Stir Processing on Coarsening Dynamics of Fe-Rich Phase in Semi-Solid Al-Si-Fe Alloy
Investigation of the Microgeometry after Hard Turning and Diamond Burnishing
Magnetic Assisted Roller Burnishing and Deburring of Flat Metal Surfaces
Development and Application of Multi-Modular Roll Magnetic Separator
Antislip Design of Cleaning Robot for Municipal Drainpipes with Medium/Small Diameter
Velocity Characteristics of the Wheel in Grinding Axisymmetric Aspheric with AEGM
Finite Element Simulation of Axial Creep-Feed Grinding Engineering Ceramics Based on ANSYS/LS-DYNA
The Simulation on Flow Field of Pesticide Nozzle with Vehicle Sprayer
A Methodology of Multi-Objective Dynamic Liquid Level Measurement Based on Wireless Transmission Technology
Study on the Electric Processing Characteristics of Difficult-to-Cut Materials
Experimental Study of Drilling Carbon Fiber-Reinforced Plastic (CFRP) with Candlestick Drill Using the Taguchi Method
Effect of Cutting Oil on Grinding Cemented Carbide
An Online Surface Defects Detection System for Step-Axis
Drilling of Glass Fibre Reinforced Plastic
Research on Power Ultrasonic Vibration Honing of Sintered Nd-Fe-B
A Novel Camera Calibration Method Based on Circle Array Target
Analysis of Microstructure of Grinding Strengthening Layer in Point Grinding under Small Depth of Cut Conditions
Influence of Original Structure on Microstructure and Properties of 35CrMo Steel after Zero Time Holding Quenching
Fuzzy Control Design and Simulation for Drain Pipe Cleaning Robot
Study of Tool Materials Rapid Selection in Cutting 300M Steel
Study on the Machining of Iron-Based Thermal Spray Coating for Sleeveless Engine Cylinder
Research on the Die Fittingness and Springback of Large Diameter Thin-Walled CT20 Titanium Alloy Tube NC Bending
Sensitivity Analysis of Material Parameters on Spring-Back of NC Bending of High-Strength TA18 Tube
The Research of Graphite Electrode to Processing Technology and NC Programming
Intelligent Monitoring System for Parking Lots Based on 1394 Camera
Indoor Ultrasonic Positioning System Based on CDMA-TDOA and its Ultrasonic Signal Analysis
Research on Calculation Method of the Cutter Setting Angle in Screw Surface Form Milling
An Experiment Study on Milling Forces in the Ultrasonic Milling of CFRP
Experiment Investigation into Surface Strain and Roughness of SUS304 Strip Ground by Fixed Abrasives
Design of Missile Autopilot with Aerodynamic Lift and Reaction Jets Based on Auto Disturbance Rejection Controller
New Technology and Applications on Passive Millimeter-Wave Sensors
Adaptive Repetitive Control of Nonlinearly Parameterized Systems Based on Fuzzy Basis Function Networks
Experimental Investigation on Cutting Forces and Temperature in High Speed Turning of Ti-5Al-2Sn-2Zr-4Mo-4Cr (Ti-17) Alloys
Microstructure Effect of Injection Molded Nanoparticle/Polymer Composites on their Resistivity
Fabrication and Performance of Symmetrical Gradient Ceramic Nozzles
Effect of Machining Parameters on Nano-Cutting of SiC Ceramics
Research on the Method to Decompose Propagation Sound Wave in Annular Duct
The Optimization of Precision Milling Parameters for Titanium Based on Genetic Algorithm
Reducing the Shrinkage Defects in the ZA27 Casting Alloy by Using Electric Pulse Current
Research on the Machining Behaviors in High Speed Milling Cellular Aluminium Alloy
The Structure Optimization of Double Feeder System Core Components
Study on Catalysis Mechanism of Electrochemical-Particles Jet Compound Machining
Study of Optical Gas Chamber Based on Infrared Gas Sensor
The Ambulatory UV Light Soure Dry Curing Machine Designing
Infrared Continuous Temperature Measurement System for Molten Steel in Tundish
A Research of a Remote Control System Based on Timed Petri Net for PDA
Mechanical Properties of High Strength Concrete Filled Steel Tubular Columns
Research on the Precession Angle (PA) Adopted in Polishing Large Aspheric Mirror
Physical and Mechanical Properties of Five Heat-Treated Hardwood Species
Design of Wireless Network Intelligent Gas Meter
Chapter 5: Welding & Joining
Numerical Simulation on the Temperature Distribution in Resistance Microwelding of Insulated Cu Wire
Mechanism of Welding Test Pieces in Tensile Property Anomaly
The Effect of Element Ag and P in Dissolving Action and Mechanical Performance of the Welds during Weld Brazing of Copper
Research on the Distributings of Vibration Sensors for Fault Diagnosis in Axial Piston Pump
The Audio Signal De-Noising Based on the ARIMA Model and Kalman Filter
A Strategic Research on Technological Innovation of Tangshan Bay
Fast, Two-Steps Syntheses and Characterization of Octa(Aminopropylsilsesquioxane)
SH-CCT of High-Strain Pipeline Steel X80
Phase Transformation Behavior and Microstructure Characterization of 9Ni Cryogenic Steel
Investigation to Self-Piercing Riveting of Wrought Magnesium AZ31 Sheets
Numerical Analysis for the Characteristics of Stress Distribution on Lap Laser Welding Joint of Stainless Sheet Steel
The Numerical Simulation of Residual Stress in the Diffusion Bonding Joints by Different Coefficients of Linear Expansion
A Novel Measurement and Qualification Method of GMAW Welding Fault Based on Digital Signals
Experimental Study on Limiting Temperatures of Circular Hollow Sections
Dynamic Analysis of Human Ear during Sound Transmission
Optimization of Process Parameters using DOE, RSM, and GA in Plastic Injection Molding
The Sustainable Development Research about Microfinance - Take the Rural Credit Cooperative of Hebei Province as an Example
Study on Composites for Furniture with Waste Paper and Wood Particle
Research on the Interface Bonding Conditions of Bimetallic Rolls Manufactured by Liquid-Solid Bonding Method
Research SMT Technology Parameter Optimize Based on NiPdAu PCB
A Novel Composition Forecasting Model Based on Choquet Integral with Respect to L-Measure and O-Density
Study on the Dephosphorization in Basic Electrode Welding
The Stability and Management of “Sandwich” Type Slopes in Extrusive Rock Area
Application of Fracture Mechanics in Ocean Engineering Structures Quality Control
Optimal Design of an IPM Motor for Machine Tool Applications
Effect of Strength Matching Performance on J-Integral of Inhomogeneous Welded Joints
Analysis of Crack on Rail Web after Flash Welding
The Study of Stadium Industrial Development Status and Countermeasures of Physical Education Institute
Effect of Arc Length on Weld Appearance and Metal Transfer in Twin-Wire GMAW Process
Numerical Study of Effect of Polymer Additives on Heat Transport in Turbulent Rayleigh- Bénard Convection
Fault Diagnosis System Based on UN-150ZB Mobile Rail Flash Butt Welding
Fabrication and Characterisation of Nanofibres by Meltblowing and Melt Electrospinning
Improve the Fatigue Performance of Welded Joints with Undercuts by TIG Dressing Treatment
Study on Welding Parameters Optimization of Duplex Stainless Steel 2205 Based on Orthogonal
Wear Behavior of Diamond+SiCp-Reinforced Metal Matrix Composite by Taguchi Method
Uncertainty Evaluation of SEM-Based Nanoroughness Measurement
Preparation of TS-1 Monolithic Catalysts and Activity Evaluation for Cyclohexanone Ammonization Reaction
Polytomous Item Relational Structure Theory Based on Empirical Distribution Critical Value
The Application of Fuzzy ANP in the Development of New Product Decision-Making - A Case Study of the Solar Module Industry
Effects of Temperature and Strain Rate on Numerical Sigmoid Curve for AZ41 Magnesium Alloy
Analysis of Temperature Distribution in Rotating Arc Welding
A Seam Image Processing Method Based on Wavelet Compress
Animation Tree in the Wind
Study on Applied Load and Irradiation of Ultraviolet (UV) Aging of Polycarbonate Characteristics: Consequences on Mechanical Properties
Research on Metallurgical Structure and Hardness of LY12 Aluminum Alloy Weld Zone under TIG and A-TIG
An Experimental Study on the Fire Resistance Performance and Spalling of 100MPa HSC Column Mixed with Fiber-Cocktail
Chapter 6: Material Design of Computer Aided
Tracking Error Estimate for Theodolite Based on General Regression Neural Network
Stress and Strain Concentrations in an Elasto-Plastic Bar of Circular Cross-Section with Semicircular Groove
Properties of Electrospark Deposited YG8 Coatings on AISI H13 Steel
Site Preference and Elastic Properties of 5d Transition Metals in Ductility YAg Alloys
An Empirical Study on Consumer Purchasing Intention in Online Group-Buying
The Mechanical Properties Research of Stress Frame Casting under Different Solidification Conditions
X-FEM Applied to Three-Dimensional Curvilinear Crack Front
Development of an Adaptive Mobil Front-Lighting System Using Multi-Functional Sensors
Numerical Simulation of the Flow Field in Safety Valve
Market Risk Analysis to Hydropower Project Based on Monte Carlo Method - Case Study of Xiluodu Hydropower Station in Sichuan Province
Revised Injection Mold Design and Flow Analysis Based on Pro/E
A Smart Wiper System Based on Feedforward-Feedback Composite Controller
The Microstructure and Electrical Property of Porous Cu Film on Soft PVDF Substrate
Analysis of Seismic Response of Heterogeneous Media: A Physical Modeling Study
The Dynamic Response and Sensitivity Analysis of the SFD-Sliding Bearing Flexible Rotor System
Calculating Hydrogen Absorption on Single Wall Carbon Nanotubes with Different Radius Using the First Principle
Assessment of Road Safety Barriers and their Effects on the Fatal Injuries Reduction in Iran
Analysis of Leveling Control System via Iterative Linear Matrix Inequalities with Full Order Observer
Study on Construction of Strategic Alliances of Procuring Agricultural Means of Production
A Novel USB Key Design with Online Emulation Debugging Functions
Impedance Matching between Signal Generator and Piezoelectric Transducer
Automatic Flight Control of Unmanned Helicopter Based on Nonlinear Model
Numerical Simulation of Peak Overpressure and Positive Pressure Time of Explosion Shock Wave in the Air
Optimal Design of LQR Controller for Single Inverted Pendulum
Research on the Customer Characteristic-Driven Innovative Design Method for Glasses
Nonlinear Heat Conduction in Materials with Temperature-Dependent Thermal Conductivity Using Hybrid Finite Element Model
Research of Grain Moisture Measurement Method Based on Pressure Sensor
Finite Element Analysis of Mandible Reconstruction Plate in the Case of Symphysis Fracture
Numerical Investigation of Effect Pilot Injection on Combustion Noise and Exhaust Emission of Diesel Engine
Outline Extraction from Triangular Meshes Based on STL Files, VC++ and OpenGL
First Principles Calculation on Adsorption of S on Impurity Fe (100)
An Automatic Information Extraction Method Based on the Characteristics of Patent
Facade Furnishings- Preliminary Study on the Art and Culture of the Chinese Doorknocker Decoration
On the Design and Analysis of Acoustic Horns for Ultrasonic Welding
Vibration of Lifting Rope when Cage Is Locking
A New Numerical Algorithm for Transmission Error Measurement at Gears Meshing
Design of the System for Online Monitoring Dielectric Loss
Properties of ZnS Thin Films Prepared by CBD under Different Concentration of Complexing Agent
Fatigue Life Evaluation on the Seam Welds in the Main Rotation Platform of YTQH800
Finite Element Design and Manufacturing Process of Flexible Roller
Study of Tool Trajectory in Incremental Forming
Electronic Anti-Cut for Automatic High Speed Horizontal Flow Wrapper with ECAM
Study on Pulverized Combustion Boiler Co-Generation Belite Q-Phase Cement Clinker from Coal
CFD Simulation of the Gas-Liquid Flow on the Ripple Tray
Chapter 7: Microwave Processing of Materials
Design and Analysis of a Grinding Machine for Back Gouging of Outer Circumferential Weld
Theory Simulations of Coaxial Bragg Reflectors with Gradual Change Ripples
Study of Numerical Problem Based on the Extended Finite Element Method
Study on the Utilization of Digital Elevation Model for Calculation Method of Reservoir Capacity
Machining Sequencing Optimization Based on Simulated Annealing Algorithm
Chapter 8: Thermal Engineering Theory and Applications
Steel Ball Temperature Uniform Distribution Time Calculation Method in Annealing Process
Research on Constant-Temperature Drying Test of Cotton Straw and Regression Analysis of Drying Rate
Equilibrium Analysis of Hydrogen Adsorption on Activated Carbon
Application Research on Lignite Quality-Improving of Pulverized Coal Direct-Fired Stove
Optimization of HAVC System with the Utilization of Geothermal Water System by Using High-Temperature Heat Pump and Fan-Coil
Method and Application of RBF Network Structure Optimization
Influencing Factors on Heat Transfer Performance for Flow Boiling of R410A in Horizontal Micro-Fin Tubes
Performance Studying of Cotton Fibers before and after Cationic Modification
Design and Study of a Phase Change Micro-Channel Heat Sink
Investigation of Conducting Pins in Sphere Filled with Phase Change Material for Enhancing Heat Transfer in Thermal Energy Storage
Research on the Influence of Ocean Atmosphere to Infrared Detection
Development Trends of Research on Monitoring Wear of Sliding Main Bearing for Diesel Engine
A Study of Paddy Heating for Insect Elimination and Improving Milled Rice Quality
Chapter 9: CAM/CAE
Solving Seepage Problems in Soils using Element Free Galerkin Method
Microstructure and Electrochemical Properties of La0.35Ce0.65Ni3.8-XCo0.8MnxAl0.4 Hydrogen Storage Alloys
Analysis on Evaluation Method of Macroeconomic Situation
Knowledge Base System of Spiral Bevel Gear Based on Design Tree
Research of Three-Dimensional Parametric Design System Based on Case-Hardened Machinery Product
Theoretical Analysis and Finite Element Simulation of Autofrettage for Extrusion Die
Coin Identification Based on Fusion Multiple Algorithms
The Research of 2 Degrees of Freedom Vertical Vibration System Modeling for 4-High Hot Strip Mill Stands
Study on Preventive Low Temperature Corrosion for Plate Heat Exchanger with Dual-Plate Structure
Measurement Data Restoring Method of Shoe Last Based on Numerical Cutting Technology
The Research of Scrap Tire Rubber Powder Effect on the Performance of Cracking Mortar
Study on the Scanning Entity Reconstruction Method of RP Reverse Engineering
Simulation for Hydrogen Absorption on Single Wall Carbon Nanotubes Using the First Principle
COE Based on Redundancy Material Defect
Modeling of Compound Errors for CNC Machine Tools
Structure and Electrochemical Properties of Spherical 0.3Li2MnO3•0.7Li(Ni1/3Co1/3Mn1/3)O2 Cathode Materials
The Analysis and Research about a Mask Design of AES
Machining Parameters Optimization for Form Milling the Gear Using Improved Harmony Search Algorithm
Mechanical Properties of Hydrogen Functionalized Graphyne - A Molecular Dynamics Investigation
Parameters Optimization about Precision Milling Titanium Alloy TC4 Used for Aviation
3.5m Head Sheave Finite Element Analysis
Phase Transitions in Systems with Finite Number of Atoms
Study on the Reaction and Thermo-Physical Properties of PC and PBT Blend
Catalytic Effect of Triethylamine on the Urethane Reaction of Asymmetry Diol
The Research of Inking Installation Based on Virtual Prototyping Technology
The Effect of Al-BSF on Seff and Rb in Industrialized Mono-Silicon Solar Cells
The Design Principle and Application of Thermally Protected Metal Oxide Varistor TMOV
Laboratory Studies on Bearing Capacity of Strip Interfering Shallow Foundations Supported by Geogrid-Reinforced Sand
Research on the Influence of Conical Anvil on Upsetting Process of Forging by Finite Element Simulation
The Application of CLS Algorithm in the Quantitative Analysis of Lime in Wheat Flour by NIR Spectroscopy
Study on Biodegradable Behavior of Polyesters in the Soil of FuJian Local
Dynamics Behaviors Analysis on the Column of Gear Grinding Machine
Study on Behavior of Carbonitride in Nb Micro-Alloyed Steel in CC-HR Region
Numerical Simulation for Geotechnical Material of Mine Stope by Mechanics and Deformation Performance
CNC Machining Simulation of Discharge Electrodes to Fabricate Models of DVD Boxes
Optimal Design of Dynamic Secondary Cooling of Continuous Casting
In Situ FT-IR Studies on the Urethane Reaction Kinetics of 1,3-Butanediol in Nitrogen-Contained Solvent
Fatigue Test and Analysis on Subframe in Fuel Cell Car
Numerical Simulation of Semi-Solid Die Casting of Housing Cap Earing
Application of Radial Basis Function Neural Network to Support Concept Evaluation
The Multi-Objective Optimization Design of Vehicle Suspension System Based on ADAMS
Influence Factors Study on the Properties of Epoxy Resin Modified by Polyurethane
Power Consumption Analysis of Polymer Solids Discharging Process in Vane Plasticization Extruder
Numerical Simulation of Temperature Field for TIG Welding of Aluminum Alloy Sheet Based on the SYSWELD
Sintering of High-Density AlN Ceramics at High Pressure
The Strategies of Energy Control of Parallel Hybrid Electric Vehicle and the Simulation Analysis of Energy Saving Efficiency
Fabrication and Construction of Large Scale Aluminum Target Chamber for SGIII
Studies on the Anatomical Structure of Fast-Growing Toona ciliate
W/O Microemulsion Preparation of ZnSe Nanometer Materials Characterization
Double Closed-Loop Motor Modeling and Analysis for Lunar Rover Simulation
The Influences of Strain Rate on the Mechanical Behavior of Paper Honeycomb
Study on the Relationships between the Optical Density and Ink Film Thickness Based on the Offset Overprint Trapping
Computer-Assisted to Personalized Excision of Bone Tumor and Precise Bone Reconstruction
The Fluid Power Control Performance Comparison Study of Two-Type ER Valve Based on FLUENT
Numerical Simulation for Heat Transfer Process of Clinching with Magnesium Alloys
Numerical Simulation on the Parallel Combined Nozzles of Mini/Micro Gas Flow Standard Device
Numerical Simulation of the Effect of Feedstock Shape on Continuous Extrusion Process
Design and Optimization of Runner and Gating System for Magnesium Piston Casting through Numerical Simulation
Study on Modeling and Simulation of Wire Vibration in WEDM
Simulation on Steel Solidification and its Shrinkage in Mould of FTSC Slab
Finite Element Optimization Design on the Back Frame of the Jaw Crusher PC5282
Numerical Simulation of Upsetting Process of External Upset Tubing
Numerical Simulation of Rock Fragmentation Process for TBM Cutters Based on Three-Dimensional Dynamic Fracturing Method
Numerical Simulation and Experimental Study of Jet Distance in Abrasive Waterjet Polishing
Weaving Process Scheduling Method Based on Ant Colony Algorithm
A Study on Preparation Mechanism and Technology Law of Quartz Nano-Powder
Static and Dynamic Characteristics Analysis of a High Speed CNC Lathe Feeding System
Molecular Simulations of Hydrogen Storage on Several Nanoporous Zeolites
The Structure Optimization Design of Cutting Disc of Defibrator Based on Monte Carlo Method
Application Research on PDM in Heterogeneous Data Source of Ship Collaborative Design
CNC Transformation of X502 Milling Machine
Study On Simulation Of The Main Shaft Production Line
The Use of Solid Edge in the Classifiers Design
Quantitative Analysis of Gas Flow in a Planar SOFC
Optimization of Cutting/Tool Parameters for Dry High-Speed Spiral Bevel and Hypoid Gear Cutting with Cutting Simulation Experiment
Study on the Parallel Modeling of Spatial Parallel Manipulator
Research on the Programming Method Based Process Planning and Kinematics for Mill-Turn Machine
Preparation of BCB Powder and its Effects on the Sintering Behaviour and Microwave Dielectric Properties of MCT Ceramics
Design of Housing Security Model Based on Family Lifecycle
Numerical Investigation of the Influence of Friction, Module and Number of Teeth in Forging Process of a Spur Gear
Electrothermal-Chemical Gun Chamber Pressure Measurement System Based on Digital Optical Fiber Transmission
Evaluation of Cutting Error in Five-Axis Free-Form Surface Milling for Table-Tilting Type Machine
Numerical Simulation and Experimental Studies for High Gas Velocity Electrostatic Precipitator
Modeling and Analysis of Manufacturing Variables in the Transesterification Process for Refined Biodiesel Fuels
Modelling and Control of Harmonic Drive Applied in Control Moment Gyros
Investigation on the Strength Analysis of Vacuum Tank
Double Scale Coupling Model of Plastic Injection Molding
Model Establishment and Simulation of Vehicle Handling Stability Using Adams/Car
Research of Modeling and Simulation for Warp-Knitted Fabric
The Study of the Relation between Clearance and Fine-Blanking Quality
Study of the Fault Diagnosis Method Based on Wavelet Time and Frequency Analysis
Studies on the Growing Characteristics of Synthesized Diamond in the System of FeNi-Ti
The Error Estimation for 5-Axis Spindle-Rotating CNC Machine Tool
Research on 3D Modeling and Virtual Assembly of Quayside Container Crane
Study on Performance Evaluation of Multi-Station Assembly System Based on Stream of Variation
The Preparation of Nitrogen-Doped Nano-TiO2 for Self-Cleaning Fabric
Numerical Simulation and Impeller Optimization of a Centrifugal Pump
Effect of Mechanical Stresses on the Coercive Force of the Heterophase Non-Interacting Nanoparticles
Mechanical Behavior of Fracture Filled with Variable Medium
Nanoindentation Test and Stress Fields Simulation of Hot-Pressed Silicon Nitride Ceramic
Molecular Dynamics Simulation for Crack Propagation in Magnesium Alloy
Simulation of Indoor Environment Monitor Calibration Gas Mantle Based on FLUENT
In Situ FT-IR Studies on the Amine-Catalyzed Urethane Reaction Kinetics of 1,3-Butanediol
Optimum Design of Drive Project in Lathe Speed-Change System
Simple Algorithm of Wavelet Decomposition Depth and Program Realization
Application of Genetic Algorithm in the Study of Semantic Modeling Design of CNC Machine Tools
The Mathematical Model of Welding Process Comparative Study of Identification Method
Kinematics Analysis of Heavy Dump Truck Lifting Mechanism
Simulation and Experimental Research of Disc Brake
Numerical Study on the Delamination Onset in Drilling Composite Materials
Compact Reflection Bragg Grating Based on Metal-Insulator-Semiconductor Structure
Improving Design of Cricoid Plastic Gating System Based on Moldflow
Research of 3D Parametric Design System of Gear Based on SolidWorks
Internal Contour Extraction Algorithm Based on Quadratic B-spline for Images of Hot Long Shaft Forgings
Tardiness Scheduling with Fuzzy Processing Time Using Tabu Search
Temperature Dependence of the Morphology and Fluorescence of Eu 3+-Doped in LaPO4 Nanowires
Erosion Mechanism of Platen Heating Surfaces in CFB
Structure Learning of Bayesian Network Using a Chaos-Based PSO
Numerical Simulation Life Prediction of Alu- Alloy Die -Casting Dies
Chapter 10: High-Speed/Precision Machining and Inspection Technology
Fault Detection of a High-Speed Electric Spindle
Study on the Magnetic Flux Leakage (MFL) for Fillet Weld
Design of Dual-Channel High-Speed Data Acquisition Card Based on USB 3.0 and FPGA
A Yard Allocation Strategy for Export Containers Based Knowledge
AOI Multi-Core Parallel System for TFT-LCD Defect Detection
Profile Study of Formed Milling Cutter for Screw Based on Non-Instantaneous Envelope Method
Research on the Roughness Model of Aspheric Surface with Parallel Grinding Method
The Research of CNC Processing Analysis and Feed Rate Determination of Scroll Compressor‘s Type Line
Development of an Economical Lapping Process
Design and Fabrication of the Superabrasive Grinding Wheel with Phyllotactic Pattern
Development of a Three-Degree-of-Freedom Parallel Workpiece Table for Ceramic Grinding
Application of Offline Programming in CMM Automatic Measurement
Method of Volumetric Error Compensation for 3-Axis NC Machine Tool
Design and Analysis of the Multi-Microchannel Aerostatic Restrictor
Preliminary Analysis of Sustainable Design Management for LSPB
Chapter 11: Micro-Machining Technology
Receptance Coupling for Micro-End-Milling
The Fabrication and Inspection of a Microball Made of Optical Fibre for Micro-Nano Coordinating Measuring Machine
Research on Micro EDM Machine Tool for Machining Micro Array Holes
Novel Additive for Alkaline Texturing of Mono-Crystalline Silicon
Kinetic Study of PZT Inertial Micro Rotary Actuator
Influence of the Key Factors on the Wall Slip Phenomenon in Micro Flow
The Mechanism of Surface Trajectories and Milling Forces in Micro-Milling Processing
A Simulation Study on Rod Electrode Wear in Micro-EDM
Investigation on Laser Etch-Machining Underwater Based on Thermal-Mechanical Effect
Multi-Resolution Analysis of Critical Dimension Line Edge Roughness
Model Building and Interface Friction Research of Micro Cutting
The Deposition and Removal Process for Micro Machining Based on Electrical Discharge
Synthesis of CdMoO4 Microcrystals by a Molten Salt Method
Study on Application of VSI Q Control Chart in Small-Batch Detection
An Improved Genetic Algorithm For Just-In-Time Job-Shop Scheduling Problem
Chapter 12: Laser Processing Technology
Embedded System for PCB Soldering Platform Controller Design
Contrast Test of KOH Solutions Jet-Assisted Laser Etching on Al2O3 Ceramics
Theoretical Analysis of Laser Shock Bulging Forming
Grouping Parallel Filling Scan Path Generating Algorithm of Metal Laser Deposition Shaping
An Integrated Technology for 3D Laser Marking
Improving Manufacturing Management with Activity Based Costing
Improving Thermal Shock Resistance of Plasma-Sprayed Yttria-Stabilized Zirconia Thermal Barrier Coatings by Laser Remelting
High Power Diode Laser for Processing
Experimental Study on Laser Plasticizing Polyamide 12
Optimization on Selective Fiber Laser Sintering of Metallic Powder
The Surface Absorption Coefficient of S304L Stainless Steel by Nd:YAG Micro-Pulse Laser
Chapter 13: Bionic Mechanisms and Bio-Manufacturing
Fabrication of Minitype Cutting Tool Based on the Electrode Dressing Technique
An Assessment of Cutting Force for Dental Implant Drilling
Hydraulic Pressure Control System Simulation and Performance Test of Lower Extremity Exoskeleton
Clam Shell Compression Characteristics and Bond Strength
Finite Element Analysis of Deep Transverse Metatarsal Ligaments Mechanical Response during Landing
Design and Analysis on the Increasing Friction Mechanism of the Convex-Hull-Typed Bionic Driving Drum
Design and Fabrication on the Electroplating Polishing Pad with Phyllotactic Pattern
The Research of the Athletic Relationship between Knee and Ankle Based on Back-Propagation Network
Chapter 14: Virtual Manufacturing and Network Manufacturing
Influence of Ladle Purging Plug Airway on Flow Properties of Liquid Steel
Research of the Flow Sampling Algorithm
Research on the Knowledge-Based Multi-Dimensional Information Model of Manufacturing Capability in CMfg
Virtual Shaping Design of Single Snowmobile
Marketing Policy Based Service Composition Model for Supplier Selection in Network Manufacturing
Implementation and Development of a Collaborative Design Platform for Heavy Trucks
Efficient Collision Detection Based on Hybrid Bounding Volumes
Study on Product Family Architecture Dynamic Evolution Based on Product Instances
Research on the Group Collaborative Mode of CSCW
Key Issues for Cloud Manufacturing Platform
Directed-Weighted Modeling of Resource Node in Manufacturing Grid and Its Application Analysis
Chapter 15: Remanufacturing Engineering
Protection & Coordination of Pharmaceutical Safety Responsibility Based on TPL
Research on Remanufacturability Index System and Evaluation Method of Electromechanical Products
Study on the Casting Defects of Vermicular Cast Iron Brake Disc and the Countermeasures
Design of Autonomic Logistics Information System Based on System Integration Model
Study on the Microstructure and the Mechanical Properties of TA2
Parameters Performance to the Vibration Isolation in Three-Dimensional Elastic Floating Raft Isolation System
Analysis on the Influence of the Re-Circulation Mechanism’s Position on the Friction Torque Fluctuation in Ball Screw
Economic Evaluation of Remanufacturing End-of-Life Electromechanical Products
Research and Application of Combinational Demulsifier
Chapter 16: Sustainable Manufacturing Technologies
Synthesis of Double Alkyl EO/PO Random Copolyethers with KOH Catalyst
The Preparation and the Research on Self-Cleaning Coating
Reliability Analysis Based on Long Flatcars
Visual Monitoring System of Steel-Cord Conveyor Belt
Study on Electrophoretic Deposition Characteristics of Ultra-Fine Diamond Powder
Study Affection of Nano-Al2O3 Additive on the Corrosion Resistance of Micro-Arc Oxidation Film of Titanium Alloy TC4
The Simulation Analysis of Ball Screw Pair Contact Characteristics Based on ADAMS
Vibration Analysis of Radial Drilling Machine Structure Using Finite Element Method
Strength and Modal Analysis of Thin-Shell-Structured Vessel with Rib Reinforcement
CFD Study of Wake Interaction of Two Wind Turbines
Study on the Microstructure and Mechanical Properties of 15CrMoR
Methodology for Calculating Energy Consumption of a Machining Process
The Linear Sweep Voltammetric Study and Two-Step Electrodeposition of CuIn 0.95 Se2.1Thin Film in a Citric Acid Electrolyte
The UWB Signals of Power Spectral Density
Tribological Characteristics of Nanostructrued Ceramic Coatings Deposited by Plasma Spraying
The Effect of Surface Finish on Zinc Whisker Growth
Stiffness Performance Simulation and Testing of a New Type Integrated Suspension Strut
Mechanical Design for Enhancing Anti-Impact Capability of Dispersing Information Detecting Robot
Study on Method of Planning the Plane Maintainability Test Based on the Development Test
Researches on Aluminum Coating by Flame Spraying on Q235 Steel Surface
Study on Microstructure and Wear Properties of (Ti,W)C/Fe Surface Composite Coating
Study on Properties of High Strength Steel during Warm Roll Forming
Research on Workflow Model with Component Based on XPDL
The Research about EDTA Plating Solutions of Non-Cyanide Copper Plating
The Traditional Dyes and Design Types of Uyghur Traditional Decorative Felt
Novel Packaging Material for Mango Transportation
Transverse Vibration Analysis of Buried Pipeline under Fluid-Solid Coupling Interaction
Ultranarrow Gap Welding with Constrained Arc by Flux Strips
The Development of Novel Electrolyte Membrane with High Proton Conductivity at Medium Temperatures
A Linear Piezoelectric Linear Motor Driven by the in-Plane Longitudinal and Bending Vibrations of an H-Shaped Vibrator
Preparation and Characterization of Liquefaction Polyol of Wheat-Straw Lignocellulose
The Influence of Zirconia Substrate Temperature on the Microstructure and Adhesion of Deposited Mg Films
Thermal Analysis on Machine Tools and Research on Time Parameters of Machine Thermal Equilibrium
The Formation of Adiabatic Shear Band and Analysis of its Characteristics in the Process of Penetration
The Study of Wireless Measurement System for Neuro-Motor Reaction Time
Tribological Performances of Active Screen Ion Sulphurized Layer under Epinoc Grease Lubricating
Research on Three Dimensional Design of Cavity of Injection Molds of Involute Plastic Gears
The Structure Design and Dynamic Characteristic Simulation Analysis of Electric Spindle Using the PC Grinder of Ceramic Ferrule
Synthesis on Modified Chloroprene Rubber Adhesive Dedicated to Bonding UHMWPE and 45# Steel
Research on Dynamic Characteristics Analysis of the Whole Grinding Machine Tool Based on FEM
Wealth Distribution in a Local-World Network
The Pressure Transmission Properties and its Application of Composite Powder between the Silica Powder and Hexagonal Boron Nitride
Research on the Carbides of Its Alloying Layer Conducted by W-Mo-Y Surface Alloying and Carburizing Process
Study on Reconstruction for Turbine Blade Surface Using NURBS
The Improvement of Anticorrosive Technology for Pipeline in Panjin Oilfield
Structure and Properties of Variant Aramid Fibers
Research on Green Supply Chain’s Coordination Based on Knowledge Spillover Effect
Study on Grinding Mechanism of BCB Grinding Wheel
Study on the Thermal Errors of CNC Machine Tools
The Organization and Microhardness of the Coating of Aluminum Alloy after FSP
Study on Ni-P-Nanometer Diamond Composite Electroless Plating for 2A12 Aluminum Alloy
Research on Error Sources Caused by Servo Feed in Cam Grinding
Study on Non-Cyanide Silver Electroplating with Copper Substrate
Stability Analysis in a Delayed Predator-Prey Model
Study on New Technology of Removing Abandoned Tobacco Zinc Plate Coating by Using Mechanical Method
Research on Renitrocarburizing of Mechanical Element
The Fatigue Life of Plan Coil Spring Forecasts Based on Potential Boundary Element
Surface Modification of Poly(ethylene Terephthalate) (PET) with UV/Nano-TiO2
Study on Dynamic Strain Aging Phenomenon of AZ91D Magnesium Alloy
Chapter 17: Digital Manufacture and Management
Research on Algorithm of Springback in Sheet Metal Forming
The Integrated Digital Manufacture of Airplane Duct Based on through Process and Three Dimensional Modeling
Assistant Decision Modal of Rapid Product Quoting for Mass Customization
A Time-Series Trend Forecast Method Based on Principal Component Analysis
Discussion on the Utilization of Forestry Resource Data to Update Basic Geographic Information Data
Automatic Processing System of Welding Spots in Auto-Body Welding Lines
Design of EFL Control System for 950 Motorcycle Based on MCU
Internet Technologies and Construction Management
Enterprise Collaborative Management System Design for Dynamic Alliance
The Product Structure Evolution Model for Maintenance Based on Finite Automaton
Process Modeling of Virtual Enterprises Partner Selection Based on Petri Net
Chapter 18: Quality Monitoring and Control of the Manufacturing Process
Research Review of Relationship between TQM and Organization Innovation
Positioning Error Compensation for Machining Center Based on Spline Interpolation
Forecast Research of Diamond Grinding Parameters Based on Multi-Variable Grey Model
Automatic Defect Detection of Yarn-Dyed Fabrics Based on Energy Fusion and Local Binary Patterns
Computer Control System Development for the New Type Pilot Cold Rolling Mill
Online Estimation System of Grinding Wheel Status Based on D-S Evidence Theory
Research of Grinding Wheel Wear Modeling Based on Hypothesis Test Principle
Control and Optimizing of Unstable State in Continuous Casting Process with Automatic System
Research on Self-Tuning Fuzzy PID Control Strategy of Metallurgy Furnace Temperature
Innovation on Quality Control: Case from Chinese Biggest E-Commerce Platform Operator
Fuzzy Control of Printing Color Quality Based on Genetic Algorithm
Research about Warm-Hot Forming Process Control of LTWB Auto B-Pillar
Differential Roll-Scanning Technology for Accuracy Measurement of Fine-Pitch Gears
A Method for the Automatic Registration of Hull Blocks Point Clouds
Optimization of Enzymatic Skinning of Catfish Nuggets Using Response Surface Methodology
Chapter 19: System Analysis and Industrial Engineering
The Application of Modern Industrial Engineering in Small and Medium-Sized Enterprise Management
Overview of Computer Simulation Modeling Platforms Based on Multi-Agent
Study of Table Tennis Training System
A New Type of Semiconductor Laser Power Supply
Efficiency Evaluation of Resources Value Flow Based on Circular Economy for Coal-Fired Power Plant
The Layout Optimization of the same Size Operating Unit in the Facility Based on Quantity Maximization
Habit Formation, Equity Premium and the Evidence of Chinese Market
Research on Element Model of Enterprise Network
Influence Analysis of Linear Data Distribution on Different Clustering Results
Design & Measure RUP Development Case Using the Zachman Framework as an Aid
The Ordering System of Technical Objects Based on Meta Object Facility
Fuzzy Group Multi-Criteria Decision-Making on Selecting & Evaluating of AMT
Space Properties of Effects of Slope Stability by Underground Mining
A Numerical Method for Solving Bilevel Optimization Based on Moving Space Response Surface
The Study of Assessment on the Environmental Adaptability of Weapons and Equipment
The Assessment of SoS’s Structure Based on the MCSP
Ergonomic Evaluation of Adjustable Care Beds in Passive Motion Procedure
Research on the Blind Area in the Display Zone of the Automobile Dashboard
Study on Evacuation Strategy in High-Rise Buildings Fire
Quality Cost Analysis Based on PVA and EVA
Chapter 20: Production and Operation Management
Yard Allocation for Coal Terminal Based on Rules
Research on Manual Scheduling Technology Using the Pattern of Human-Computer Cooperation
Difficulties of E-Commerce Application in Small and Medium Enterprises
Researches on Joint Distribution in Urban Logistics
Internal Capabilities, External Competition and Firm Performance: A Case Study for an Accelerated Internationalization Firm in Manufacturing
Simulation of Stock Strategies in Dynamic Supply Chains
Research on Professionalized Operation and Management Model for Large and Medium Biogas Projects
Design and Implementation of Heavy Container Handling Equipment Maintenance System
The Influence Factors Analysis on Response Speed of Agile Supply Chain
Enterprise Inventory Control Based on Supply Chain Management
PMIS Service Providing through SaaS Structure
Mass Customization Based on Energy-Saving Concept - In the New Economic Era as the Background
The Effectiveness of Environmental Regulation on Manufacturing Productivity in Jiangsu Province
Research on Planning of Hybrid Hot Charge Rolling Base on Specific Reheating Furnaces
Maintaining Manufacturing Viability in Difficult Times with the Balanced Scorecard
Integrated Production-Inventory Model in a Multi-Echelon Closed-Loop Supply Chain with Product Returns
Supply Chain Coordination Mechanism Based on Lead-Time Compression under Elastic Demand
Productivity Growth in Chinese Construction Industry Considering Solid Wastes Generation
Design the Real Estate Industry Value Chain Based on Multidimensional Reconstruction
A Study on the Configuration of Handling Equipments for Container Terminal
Optimizing Pull Production Systems with Cost Objectives by Modified Memetic Algorithm
Solving Lot-Sizing and Sequencing Integrated Optimization Problems in Mixed-Model Production Systems
Research of Stochastic Control on Aviation Supplies Inventory
The Conservation Methods of Ancient Lu Embroidery Fabric
Chapter 21: Green Supply Chain
The Impact of Manufacturing Firms’ Green Supply Chain Management on Competitive Advantage
Greening the Housing Supply Chain in China
Sustainable Supply Chain Management: A Case Study From Indian Automotive Industry
Based on Fuzzy Math Method to Evaluate of Reverse Logistics of Waste Automobiles
Study on Green Supply Chain of Chinese TV Industry under Circular Economy
Designing Reverse Logistics Networks
New Approach for Researching Forest Ecosystem
Bi-level Program on Competitive Location of Logistics Distribution Center
Research on Selection of Third-Party Reverse Logistics Supplier Based on Fuzzy Analytic Hierarchy Process Method
A Dynamic Game Model of Reverse Logistics for End-of-Life Electronic Products Based on Complete Information
Chapter 22: Manufacturing E-Commerce System
The Application of Smart Vehicle Deployment System in Asphalt Concrete Factory
Voronoi Diagram Based Retrieval Method for the Internet of Things
The Design and Realization of ERP System for Staff Training
Study on Service Architecture and Information Platform of Supply Chain Logistics Based on Service Chain
Research of Tobacco Sorting System and Equipment Based on the Internet of Things
The Preparation and Visible Light Photocatalytic Activity of ZnO-TiO2 Nanofibers
A Study on Family Medical Sensor Networks and ECG and Temperature Monitoring Node Based on 6LoWPAN
Efficient Mining of Skyrank Items in Recommender Systems
Tmall Incident - A Legal Problem or Business Operation Dispute
