Buch, Englisch, Format (B × H): 170 mm x 240 mm, Gewicht: 3410 g
Buch, Englisch, Format (B × H): 170 mm x 240 mm, Gewicht: 3410 g
ISBN: 978-3-03835-008-8
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Foreword and Congress Committees
I. Biomaterials
Molecular Dynamics Investigation on Shearing between Osteopontin and Hydroxyapatite in Biological Materials
Nanostructure and Fatigue Behavior of ß-Type Titanium Alloy Subjected to High-Pressure Torsion after Aging Treatment
II. Case Studies and Industrial Applications
Analysis and Design of Offshore Pile Foundation
Offshore Pile Foundation Subjected to Lateral Cyclic Load in Layered Soil
Fatigue Strength of Machined and Shot Peened Grey Cast Iron
On Thermo-Hydro-Mechanical (THM) Fatigue Damage of Historical Stone Buildings
Effect of Thermal Cycling on the Mechanical Properties of a Continuous Fibre Composite Used for Car Clutch Facings
The Role of Surface Topography on Fatigue Behaviour of Nickel Based Superalloys
Failure Analysis to Blades of Steam Turbines at Normal Conditions of Operations and Resonance
Failure Analysis of Repeat Tooth Breakage of a 40MW Steam Turbine Load Gearbox
III. Case Studies, Materials and Processes
Fatigue of Cold Expanded Open Hole Coupons with Pre-Existing Cracks
A Fractographic Investigation of a Failed Precombustion Chamber Nozzle from a Large Marine Diesel Engine
Case Studies of Fatigue Failures in Defence Aircraft Components
The Influence of Corrosion Pits and Cold Expanded Fastener Holes on the Fatigue Life Aluminium 7075-T651
An Investigation of the Extent of Crack Closure for Crack Growth in an Aluminium Alloy
Effect of Load Spectra and Stress Magnitude on Crack Growth Behavior Variability from Typical Manufacturing Defects
A Brief History of Structural Fatigue Testing at Fishermans Bend Australia
Fatigue Life Improvement of Laser Clad 7075 Aluminium Alloy by Deep Surface Rolling Technique
IV. Civil and Mining Structures
Fatigue Assessment of Large Thin-Walled Structures with Initial Distortions
Retrofitting for Fatigue Cracks at Connection between the Main Girder Web and Lateral Girder Flange Using the Bolting-Stop-Hole Method with Attached Plates
A Self-Heating Approach to Characterize Anisotropy Effects in Fatigue Behaviour: Application to a Nineteenth Century Puddled Iron from a French Railway Bridge
Evaluation of Bonding between High Modulus CFRP Sheet and Steel after Environmental Exposure and Fatigue Loading
Improved Fatigue Life Assessment of Lighting Poles
V. Composites
A Brief Review of Fatigue Strengthening of Metallic Structures in Civil Engineering Using Fibre Reinforced Polymers
Stiffness Based Fatigue Characterisation of CFRP
Fatigue Crack Growth Rate in Mode I of a Carbon Fiber 5HS Weave Composite Laminate Processed via RTM
The Influence of Orthotropy and Taper Angle on the Compressive Strength of Composite Laminates with Scarfed Holes
Notched Fatigue Behavior under Multiaxial Stress States
Effect of Disbonds on the Fatigue Endurance of Composite Scarf Joints
Delamination Fatigue Properties of Z-Pinned Composites
VI. Corrosion and Fatigue
Standardized Test Method for Corrosion Pit-to-Fatigue Crack Transition for AA7075-T651 Aluminum Alloy
Effects of Waveform and Cycle Period on Corrosion-Fatigue Crack Growth in Cathodically Protected High-Strength Steels
Influence of Load Signal Form and Variable Amplitude Loading on the Corrosion Fatigue Behaviour of Aluminium Alloys
The Effect of Ralstonia pickettii on Environmental Fatigue Crack Growth of 7xxx Series Aluminum Alloys
The Effect of Corrosion Inhibitors on Environmental Fatigue Crack Growth in Al-Zn-Mg-Cu
Experimental and Modeling Study of the Effect of Corrosion Pitting on Fatigue Failure Locations in Aircraft Components
A Model for Predicting the Stress Concentration of Intergranular Corrosion around a Fastener Hole
Corrosion-Fatigue Crack Growth in Age-Hardened Al Alloys: Examples of Failures and Explanations for Fractographic Observations
An Extended Finite Element Model Coupled with Level Set Method for Stable Pitting Corrosion
Managing Fatigue from Corrosion Pits in Aircraft Structures
Corrosion Fatigue Behaviour of a Common AZ91D Magnesium Alloy in Modified Simulated Body Fluid
Three Ways of Sampling and Fatigue Test Results of Steel P92
Effect of Environmental Corrosion on Fatigue Crack Growth Morphology: A Detailed Investigation of the Boundary between Fatigue and Corrosion Control Regimes
VII. Crack Closure and Shielding
The Explanation of Stress Ratio Effect and Crack Opening Corrections for Fatigue Crack Growth in Metallic Materials
3D Numerical Study on how the Local Effective Stress Intensity Factor Range Can Explain the Fatigue Crack Front Shape
Influence of Martensitic Phase on Microcrack Propagation in a Ferritic-Martensitic Steel
Experimental and Numerical Simulation Study of Plasticity-Induced and Roughness-Induced Fatigue Crack Closure
Micro Fatigue Crack Propagation Behavior in a Duplex Stainless Steel Studied Using In Situ SEM/EBSD Method
Fatigue Crack Closure due to Surface Roughness and Plastic Deformation
VIII. Crack Growth Thresholds
Fatigue Crack Growth Behavior in the Threshold Region
Crack Growth Threshold Criterion Based on Calculation of Dynamic Stress Intensity Factors in the Mixed Mode (Complex Functions Theory Approach)
Influence of the Inclusion Type on the Threshold Value of Failure in the VHCF-Regime of High-Strength Steels
Comparison of SGBEM-FEM Alternating Method and XFEM Method for Determining Stress Intensity Factor for 2D Crack Problems
Influence of Crack Retardation on Fatigue Crack Propagation in Steels for Railway Axles
Investigations on the Fatigue Crack Propagation Threshold in Very High Cycle Fatigue
IX. Creep-Fatigue
J-Integral Approach to Creep-Fatigue Crack Propagation in Lead-Free Solder under Various Loading Waveforms
Determination of Creep Crack Growth Threshold by Experiments under Elevated Temperature with Pre-Stressed Specimens
Low Cycle Fatigue Behavior and Mechanism of Newly Developed Advanced Heat Resistant Austenitic Stainless Steels at High Temperature
Low Cycle Fatigue and Creep-Fatigue Interaction Behaviour of Reduced Activation Ferritic Martensitic (RAFM) Steels with Varying W and Ta Contents
X. Cyclic Deformation and Crack Initiation
Cyclic Deformation of Rare-Earth Containing Magnesium Alloys
Fatigue Behaviour of AZ91 Magnesium Alloy in as-Cast and Severe Plastic Deformed Conditions
Fatigue of Austenitic High Interstitial Steels - The Role of N and C
Damage Evaluation of Ferrite and Ferrite-Pearlite Steel during Fatigue Crack Initiation by EBSD
Low-Cycle Fatigue Behaviour of a Ni-Based Single-Crystal Superalloy
Low-Cycle Fatigue Crack Growth in Ti-6242 at Elevated Temperature
Fatigue Behavior of Ultrafine Grained Medium Carbon Steel with Different Carbide Morphologies Processed by High Pressure Torsion
Period of Fine Granular Area Formation of Bearing Steel in Very High Cycle Fatigue Regime
Effect of Geometry and Distribution of Inclusions on the VHCF Properties of a Metastable Austenitic Stainless Steel
Experimental Investigations and Damage Calculations of a Load Time History in the Very High Cycle Fatigue
Cyclic Slip Localization and Crack Initiation in Crystalline Materials
Identifying the Effect of 475°C Embrittlement on the Cyclic Stress-Strain Response of Duplex Stainless Steel by Means of the Change in the Yield Stress Distribution
Influence of Surface Morphology on the Fatigue Behavior of Metastable Austenitic Steel
Cyclic Deformation Response of Polycrystalline OFHC Copper under Pure Compression Fatigue
Fatigue Behavior of Precipitation Hardening Alloys in the LCF and VHCF Regime
Investigation of the Three-Dimensional Shape of Slip Bands in Fatigued Dual Phase Steel
Mutual Interaction between Fatigue Crack Initiation/Propagation and Microstructural Features in Cast Aluminum Alloys
Experimental and Theoretical Study of the Performance of Reinforced Concrete Specimen Subjected to Cyclic Loading and Aggressive Environment
Unifying Monotonic and Hysteresis Material Properties for Notch Plasticity Analysis under Variable Amplitude Loads
Low Cycle Fatigue Behaviour of a Turbine Blade Made of Nickel Base Wrought Alloy
Fatigue Life Analysis of Specimens Subjected to Infrequent Severe Loading Using a Nonlinear Kinematic Hardening Cyclic Plasticity Model
An Overview of the Fatigue of Polychloroprene Rubber
AFM and FIB Study of Cyclic Strain Localization and Surface Relief Evolution in Fatigued f.c.c. Polycrystals
In Situ Study of the Mechanisms of High Temperature Damage in Elastic-Plastic Cyclic Loading of Nickel Superalloy
Very High Cycle Fatigue in Pulsed High Power Spallation Neutron Source
Simulation of Surface Crack Initiation Induced by Slip Localization and Point Defect Kinetics
XI. Damage Evaluation and Fatigue Design
Fatigue Monitoring of Double Surface Defects Using PZT Based Electromechanical Impedance and Digital Image Correlation Methods
Effect of Stress Ratio and Loading Mode on High Cycle Fatigue Properties of Extruded Magnesium Alloys
Fatigue Crack Propagation Limit Curves for High Strength Steels and their Application for Engineering Critical Assessment Calculations
Titanium Alloy Developments For Future Fan Disc Applications – The Fatigue Response of “Alloy 104”
High-Cycle Fatigue Properties of Carbon Steel and Work-Hardened Oxygen Free Copper in High Pressure Hydrogen
Investigation of Fatigue Crack Acceleration under Variable Amplitude Loading for a Structural Steel and Aluminium Alloy
Fatigue Analysis and Design of Composite-Metal Joints in Primary Aircraft Structures
Nondestructive Evaluation of Mechanically Loaded Advanced Marine Composite Structures
Evaluation of Fatigue Damage by Diffraction Contrast Tomography Using Synchrotron Radiation
Experimental Study of Relationship between Energy Dissipation and Fatigue Damage from Observation of Slip Band by Atomic Force Microscope
XII. Damage Tolerance/Aging Aircraft
Optimization of Numerical Analyses for Maintenance of Fuselage Skins with Rectangular Repairs
Residual Fatigue Properties of a 2024-T351 Aluminium Alloy from the Teardown of AIRBUS A320 Wing Panels after Service
Effects of Bonded Crack Retarders on Fatigue Parameters of FSWed Integral Panel
Comparison of Tensile and Compressive Creep-Fatigue Damage Behavior of Cellular Composites
XIII. Experimental Techniques
Thermal Cycling Fatigue of Thermal Barrier Coatings - Rig and Experiment Design
XIV. Fatigue Life Enhancement
Effect of Ultrasonic Shot Peening on the Fatigue Strength of Stainless Cast Steel ASTM CA6NM for Hydraulic Turbine Runner
Development of Low Temperature Nitriding Process and its Effects on the 4-Points Bending Fatigue Properties of Commercially Pure Titanium
Improvement of Fatigue Properties in a Cast Aluminum Alloy by Roller Burnishing and Friction Stir Processing
Influence of Shot Peening on the Fatigue Strength of Custom 465 Stainless Steel for Aeronautic Application
Nitriding Effect on Corrosion Fatigue Strength of Low Alloy Steel in 1% HCl Aqueous Solution
Hole Cold Expansion the Fatigue Mitigation Game Changer of the Past 50 Years
XV. Fatigue Life Prediction and Test
Fractographic Study on the Use of Rainflow Counting for Small and Long Cracks in AA7050
F-35 Full Scale Durability Modeling and Test
Development of CGAP for Fatigue Damage and Crack Growth Analysis: Verification, Validation and Examples of Application
Analysis of Black Hawk Main Transmission Support Beam In-Service Fatigue Crack
Helicopter Airframe Fatigue Spectra Truncation and Verification
Helicopter Airframe Fatigue Spectra Generation
Probabilistic Vibration Analysis of a Mistuned Integrally Bladed Disk
A Modified Compliance Method for Automatically Measuring Fatigue Crack Growth In Situ during Spectrum Fatigue Testing
Life Extension of F/A-18 LAU-7 Missile Launcher Housings Using Rework Shape Optimisation
XVI. Fatigue Modelling and Simulation
Development of New Fatigue Model for New Zealand Dense Graded Hot Mix Asphalts
Experimental Study on the Multistage Strength Degradation and the Associated Strain Energy Variation of S25C
Modelling of Fatigue Crack Growth in Inconel 718 under Hold Time Conditions - Application to a Flight Spectrum
A Cohesive Zone Model to Simulate Fatigue Crack Propagation under High Pressure Gaseous Hydrogen
Rainflow-on-the-Fly Methodology: Fatigue-Crack Growth under Aircraft Spectrum Loading
Numerical Simulation of Fatigue Crack Growth Rate and Crack Retardation due to an Overload Using a Cohesive Zone Model
Stress Intensity Factor Solutions for Narrow Plates
A Probabilistic Two-Scale Approach to Predict the High Cycle Fatigue Behaviour of Ti-Al6-V4 Parts Machined by High Pressure Water Jet Assisted Turning
A Deviatoric Stress-Strain Function for Fatigue Life Analysis
Fatigue Assessment of Existing Shiploaders
Constitutive Modeling for Cyclic Behavior of AZ31B Magnesium Alloy and its Application
The Effect of the Microstructure and Defects on Crack Initiation in 316L Stainless Steel under Multiaxial High Cycle Fatigue
The Energy Based Approach to Fatigue
Assessing Structural Safety of Bolted Joints Subject to Cyclic Loading Using Advanced Nonlinear FEA
Physically-Based Simulations of the Cyclic Behavior of FCC Polycrystals
XVII. Fatigue of Coatings
Influence of HVOF Coating on the Fatigue Strength of 15-5 PH Stainless Steel
Effect of Thermal Barrier Coating on Low Cycle Fatigue Behavior of Cast Inconel 713LC at 900 °C
Fatigue Crack Development in Epoxy Coatings on Steel Substrate: The Role of Coating and Substrate Properties in Determination of the Onset of Fatigue Cracks
XVIII. Fracture Processes and Fatigue in Rocks
Dependence of Static Fatigue Tests on Experimental Configuration for a Crystalline Rock
Large-Scale Deformation Patterning in Geomaterials Associated with Grain Rotation
The Cyclic Loading as a Result of the Stick-Slip Motion
The Fracture Characteristic of Mode III Rock Crack under Different Temperature
XIX. Fretting and Contact Fatigue
Reduction in Fretting Fatigue Strength of Austenitic Stainless Steels due to Internal Hydrogen
Fretting Fatigue Behavior of Titanium Alloy Coated with Functionally Graded Ti/TiN Film
Fatigue Stress Ratio Effect on Fretting-Fatigue Crack Nucleation: Comparison between Multi-Axial and Uni-Axial Predictions
XX. Growth of Short and Long Cracks
Description of Small Fatigue Crack Propagation in ODS Steel
Fatigue Crack Propagation Behavior of AZ61 Magnesium Alloy under Controlled Cathodic Potential
Investigation of Fatigue Crack Propagation in Nickel Superalloy Using Diffraction Contrast Tomography and Phase Contrast Tomography
Calculating the Resistance of a Grain Boundary against Fatigue Crack Growth
Thermographic Investigation of Fatigue Crack Propagation in a High-Alloyed Steel
Effect of Hydrogen Gas on the Growth of Small Fatigue Crack in JIS-SCM435
The Effect of Crack Growth Retardation when Comparing Constant Amplitude to Variable Amplitude Loading in an Aluminium Alloy
Fatigue Lifetime and Crack Growth Behavior of WC-Co Cemented Carbide
Fatigue Crack Growth in a Precipitation-Hardened Martensitic Stainless Steel: Influence of Ageing, Temperature and Loading History
XXI. Laser Shock Peening
Improvement in Fatigue Strength of Friction Stir Welded Aluminum Alloy Plates by Laser Peening
Laser Shock Peening on a 6056-T4 Aluminium Alloy for Airframe Applications
Fatigue Life Recovery via Laser Shock Peening in Mechanically Damaged Aluminium Sheet; Experiments and Prediction Models
Fatigue Crack Retardation in LSP and Sp Treated Aluminium Specimens
Laser Shock Peening to Repair, Design and Manufacture Current and Future Aircraft Structures by Residual Stress Engineering
XXII. Life Prediction Methodology and Software Development
Fatigue Crack Growth and Coalescence Algorithm Starting from Multiple Surface Cracks
Integrating Fatigue Crack Growth into Reliability Analysis and Computational Materials Design
A New Progressive Curvilinear Strain Energy-Based Crack Growth Modeling Algorithm Using Multicomplex Variable Finite Elements
Numerical Fatigue Analysis for Twin Roll Cast Magnesium Sheet Metal Structures
High Temperature Multiaxial Creep-Fatigue Life Prediction for YH61 Nickel-Base Single Crystal Superalloy
Anisotropic Life Prediction for Single Crystal Nickel-Base Flat Plate with a Hole
XXIII. Management of Fatigue and Reliability
Localized Fatigue Failure Analysis of Aluminium Crewboats due to Propeller Pulse Loads: A Case Study
Bayesian Updating of Aircraft Risk Assessments Using Results of Inspection
Structural Integrity – Yesterday – Today – Tomorrow
Pseudo Fatigue Testing for Rapid Certification to Service
Practical Application of Structural Repair Fatigue Life Determination on the AP-3C Orion Platform
C-130H Centre Wing Lower Surface Tang Blend Repair Management
QinetiQ Aircraft Structural Integrity Experience and Lessons Learnt
Cost Effective Safety from Full System Teardowns
XXIV. Microstructural Aspects
Development of a Probabilistic Model for the Prediction of Fatigue Life in the Very High Cycle Fatigue (VHCF) Range Based on Inclusion Population
Fatigue Crack Growth in Ultrafine-Grained Copper Obtained by ECAP
Fatigue Behavior and Life Prediction of an Equiaxed Crystal Nickel-Base Superalloy under Different Dwell Times and Strain Ratios
Study of the Effects of Two-Step Ageing Heat Treatment on Fatigue Crack Growth on an AA7050 Aluminum Alloy
XXV. New Materials (MMCs, CMCs, Intermetallics, Hybrid Materials)
Numerical Modeling of Graphene/Polymer Interfacial Behaviour Using Peel Test
Fatigue of Ultra-Fine Grained a-Brass
Cyclic Deformation of a Modern TiAl Alloy at High Temperatures
XXVI. Rail Transport
Influence of Short Thermal Cracks on the Material Behaviour of a Railway Wheel Subjected to Repeated Rolling
On Constitutive Models for Ratcheting of a High Strength Rail Steel
Fretting Fatigue Testing of Carburized Alloy Steel in Very High Cycle Regime Using an Ultrasonic Torsional Fatigue Testing Machine
On the Evaluation of the Stress State in Rail Head for Assessing Fatigue Resistance
Fatigue in Railway Components - Understanding vs. Resolution
Rail Bogie Structural Assurance
Calculation of Critical Crack Size of Repair Welded Rail
Fatigue Analysis of the Rail Underhead Radius under High Axle Load Conditions
XXVII. Reliability Analysis
Probabilistic Damage Tolerance Analysis for General Aviation
Material Scatter in Crack Growth Rates of 7075-T7351 under Spectrum Loading
XXVIII. Residual Stresses and Fatigue
A Detailed Evaluation of the Effects of Bulk Residual Stress on Fatigue in Aluminum
Fatigue Crack Growth Rate in Laser-Welded Web Core Sandwich Panels - Fatigue Crack Propagation in Welded Base Metal
Repairing and Preserving Bridge and Steel Structure Using an Innovative Crack Arrest Repair System
XXIX. Structural Health Monitoring and Prognostics
Proposal of an Eigen-Strain Estimation for Determination of Residual Stresses Considering the Influence of Machining
Influence of Cyclic Deformation Induced Phase Transformation on the Fatigue Behavior of the Austenitic Steel X6CrNiNb1810
Scattering of the Fundamental Symmetric Wave Mode Incident at a Defect on the Blind Side of a Weep Hole in an Isotropic Plate
Preliminary Study on the Acoustic Emission Wave Velocity on Filament Wound Glass Fiber Reinforced Polymer Pipes and its Correspondence with the Winding Angle
Scattering Phenomena of Edge Guided Waves at and around Notches
Durability of Embedded PZTs in Structural Health Monitoring Systems under Cyclic Loading
Endurance Testing of a Vibration Energy Harvester for Structural Health Monitoring
Detection and Monitoring of Fatigue Cracks in Metallic Structures Using Acoustic Emission: Routes to Quantification of Probability of Detection
XXX. Thermomechanical Fatigue
Material Modelling and Lifetime Prediction of Ni-Base Gas Turbine Blades under TMF Conditions
Modelling of TMF Crack Initiation in Smooth Single-Crystal Superalloy Specimens
Investigation on Fatigue Crack Interaction with Grain Orientation during TMF Tests in Nickel-Base Superalloy
Fatigue Crack Thresholds Significantly Affected by Thermo-Mechanical Loading Histories in an Austenitic and a Ferritic Low Alloy Steel
Crack Growth of a Polycrystalline Nickel Alloy under TMF Loading
Evaluation of Conventional Al 2024 Fatigue Limit in Fatigue Test Using Thermographic Measurement: Effect of Frequency
Influence of Extremum Temperatures on TMF of a Ni-Base Superalloy
Influence of the Strain Rate on the Low Cycle Fatigue Life of an Austenitic Stainless Steel with a Ground Surface Finish in Different Environments
XXXI. Variable Amplitude Loads, Multiaxial and Mixed Mode Fatigue
Specificity of Crack Initiation under Equibiaxial Fatigue: Development of a New Experimental Device
Low Cycle and Multiaxial Fatigue Behavior of Three Al-Mg-Si Alloys
High-Cycle Fatigue Behaviour of Pure Tantalum under Multiaxial and Variable Amplitude Loadings
Accurate Prediction of Fatigue Life under Random Loading
Experiments and Interpretations of some Load Interaction Phenomena in Fatigue Crack Growth Related to Compressive Loading
A New Criterion for Evaluating Multiaxial Fatigue Damage under Multiaxial Random Loading Conditions
AZ31 Magnesium Alloy Multiaxial LCF Behavior: Theory, Simulation and Experiments
A Flexible HCF Modeling Framework Leading to a Probabilistic Multiaxial Kitagawa-Takahashi Diagram
Fundamental Concepts for Formulating Fatigue Strength Diagrams of Notched Metals
Fatigue Failure Life of SS400 Steel under Non-Proportional Loading in High Cycle Region
Visualization of Multiaxial Stress/Strain State and Evaluation of Failure Life by Developed Analyzing Program under Non-Proportional Loading
Fatigue Behaviour of Laser Beam Welded Circular Weld Seams under Multi-Axial Loading
Notch Effects on Fatigue Behavior of Thermoplastics
XXXII. Very-High-Cycle Fatigue
High-Temperature Ultrasonic Fatigue Testing at 1000°C
Initiation from Low Cycle Fatigue to Gigacycle Fatigue
Partition of Cyclic Plasticity in an Austenitic-Ferritic Duplex Stainless Steel and its Significance for Fatigue Crack Initiation under High and Very High Cycle Fatigue Loading Conditions
Influence of Frequency and Testing Technique on the Fatigue Behaviour of Quenched and Tempered Steel in the VHCF-Regime
Formation Mechanism of Specific Fracture Surface Region in the Sub-Surface Fracture of Titanium Alloy
XXXIII. Welding, Casting and Other Manufaturing Technologies
Influence of Weld Imperfections on the Fatigue Behaviour of Resistance Spot Welded Advanced High Strength Steels
On the Effect of Electrodischarge Drilling on the Fatigue Life of Inconel 718
Fatigue and Fatigue Crack Propagation of Laser Beam-Welded AA2198 Joints and Integral Structures
Behaviour of Friction Stir Welded Joints Made out of Two Aluminium Alloys under Cyclic Loading Conditions
Reduction in Fatigue Strength of Arc Welded Aluminium 5083-H111 on Immersion in NaCl
Influence of Process-Related Defects on the Fatigue Behaviour of Welded Aluminium Joints at Very High Cycles
Effect of Fine-Grained Microstructure Induced by Induction-Heating Fine Particle Peening Treatment on Fatigue Properties of Structural Steel (0.45%C)
Fatigue Behaviour of Friction Stir Welded Steel Joints
Role of Friction Stir Channel Geometry on the Fatigue Behaviour of AA5083-H111 at 120°C and 200°C
Microstructure and Strain-Based Fatigue Life Approach for High-Performance Welds
Comparison of High Cycle Fatigue in 4340 and 300M Steel Welded with Fiber Laser
The Effectiveness of Design Procedures for Fatigue Design of Welds
The Effect of Manufacturing Defects on the Fatigue Behaviour of Ti-6Al-4V Specimens Fabricated Using Selective Laser Melting
Weld Toe SCF and Stress Distribution Parametric Equations for Tension (Membrane) Loading
XXXIV. Poster
Effects of Carbon Fibre Geogrid Reinforcement on Propagation of Cracking in Pavement and Augmentation of Flexible Pavement Life
Influence of Heat Treatment on Fatigue Resistance of Electron Beam Welded Dissimilar Titanium Alloy Joints
Rolling Contact Fatigue and Wear Behavior of Rail Steel under Dry Rolling-Sliding Contact Condition
Groove Angles Influence on Mechanical and Microstructural Properties of P460N Steel in SMAW
Three-Dimensional Porous Carbonate Apatite with Sufficient Mechanical Strength as a Bone Substitute Material
Modeling Reliability of Critical Infrastructures with Application to Port Oil Transportation System
Optimizing Reliability of Critical Infrastructures with Application to Port Oil Piping Transportation System
Postponing Crack Nucleation in 2024 Aluminium Alloy by Dynamic Precipitation from the Supersaturated State
Specimens for Simultaneous Mode II, III and II+III Fatigue Crack Propagation: Elasto-Plastic Solution of Crack Tip Stress-Strain Field
Review on the Fatigue of Composite Hybrid Joints Used in Aircraft Structures
A Review of Damage Tolerant Design, Certification and Repair in Metals Compared to Composite Materials
Low-Cycle Fatigue Behavior of TWIP Steel - Effect of Grain Size
Crystal Plasticity Finite Element Simulations of Polycrystalline Aluminium Alloy under Cyclic Loading
Modelling the Effect of Particle Size Distribution in Multiphase Flows with Computational Fluid Dynamics and Physical Erosion Experiments
Cyclic Deformation Behavior of a New N+C Alloying Austenitic Manganese Steel
Lifetime Improvement of AlSi6Cu4 Cylinder Head Alloy
Biaxial Specimen Design for Structures Subjected to Multi-Axial Loads
A Study on Estimation of S-N Curves for Structural Steels Based on their Static Mechanical Properties
Crack Growth Study of Dissimilar Steels (Stainless - Structural) Butt and Overlap Welded Unions under Cyclic Load
On the Development of a Prediction Methodology for Crack Growth in Fibre Metal Laminates with MSD Scenario
Effects of Long-Time Aging on Fatigue Crack Propagation Behaviors of a Hardworking Ni-Based Superalloy
Non-Classical Solutions of Critical Rock Behavior
Fatigue and Damage Tolerance of Aging Airplane Structures
Finite Element Simulation of Stable Fatigue Crack Growth Using Critical CTOD Determined by Preliminary Finite Element Analysis
Mechanics of Fatigue Crack Propagation in Submicron-Thick Freestanding Copper Films
Fatigue and Damage Tolerance Substantiation Approach for a Regional Jet
Analysis of the Fatigue Stress on Welded Joints of the U-Rib in an Orthotropic Steel Deck
Evaluation of the Serviceability of the Transverse Joint of a Modular Bridge under a Cyclic Load
Effect of Microscopic Structure on High-Cycle Fatigue Behavior in Nano-Components
Plastic Slip and Early Stage of Fatigue Damage in Polycrystals: Comparison between Experiments and Crystal Plasticity Finite Elements Simulations
Wavelet-Based Feature Extraction Algorithm for Fatigue Strain Data Associated with the k-Means Clustering Technique
Fatigue Behavior and Surface Sensitivity of Board-Shaped Sample of Powder Metallurgy FGH 96
Prediction of Fatigue Crack Growth of Aged Hardening Al-Alloys under Variable Amplitude Loading
Fatigue Behavior of Weld Repaired AISI 4130 Aeronautic Steel Used in Critical Flight Safety Structures
Screw Dislocations Emitted from a Blunt Crack in a Piezoelectric Material
Measurement and Simulation of Random Vibro-Impact Responses at Brake Guide Pins
Fatigue Life Prediction for Caliper Guide Pin under Random Vibrational Loading
Influence of Milling and Abrasive Waterjet Cutting on the Fatigue Behaviour of DP600 Steel Sheet
High Cycle Fatigue Behavior and Microstructural Characterization of 6013-T4 Aluminum Alloy Laser Welded Joints
Low Cycle Fatigue Estimation Based on the Critical Distance Stress Theory
Peculiarities of Elastic Waves Generated by Fatigue Tensile Fractures
Study of Fatigue Crack Growth in Al-Mg-Si Alloys Using a Predictive Model under Positive and Negative Load Ratios
Numerical Analysis of the Effect of Slip Ratio on the Fatigue Crack Initiation Life in Rolling Contact
Enhancement of Rolling Contact Wear and Fatigue Resistance of Wheel Steel by Laser Dispersed Treatment
Modelling Fatigue Crack Growth Rates in Aluminium Plates Reinforced by Bonded Fibre-Metal Laminates for Fatigue Life Extension
Effect of Incipient Heat Damage on the Fatigue Properties of Aircraft Composites
Influence of Secondary Ageing on Fatigue Crack Propagation of the AA7050 Aluminum Alloy
