Sonstiges, Englisch, Band Volumes 535-537, 2260 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
Sonstiges, Englisch, Band Volumes 535-537, 2260 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
ISBN: 978-3-03795-264-1
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Verbundwerkstoffe
- Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Technologie der Kunststoffe und Polymere
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Elektronik, Optik
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Metallische Werkstoffe
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Biomaterialien, Nanomaterialien, Kohlenstoff
- Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Metallurgie
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Polymerwerkstoffe
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Keramik, Glas, Sonstige Werkstoffe
Weitere Infos & Material
Mechanical Behaviors of Sic Particle Reinforced Al Matrix Composites: A Study Based on Finite Element MethodPreparation and Properties of Cf-TiB2-Cu-Graphite CompositesMicrostructure and Mechanical Properties of In Situ TiB2/6061 CompositesEffect of High-Energy Ball Milling to Powders on Microstructure and Physical Properties of Al-50Si AlloyThe Influence of Nonlinear Matrix on Mechanical Behavior of Polymer Particulate CompositeStudy on Biomimetic Composites by Imitating Shell StructurePreparation and Electrochemical Properties of Amorphous Tin-Copper Composite Oxide CuSnO3First Principles Study on the Electronic Properties of Cr, Fe, Mn and Ni Doped ?-Ga2O3Rapid In Situ Reactive Sintering and Properties of ZrO2-ZrW2O8 CompositesInfluence of LiCl Flux on the Process of In Situ Fabrication Aluminum Matrix CompositesEffects of Different Factors on Antibacterial Properties of Crosslinked Chitosan-Coated Ag-Loading Nano-SiO2 CompositesPiezoelectric, Dielectric and Pyroelectric Property in Morphotropic Phase Boundary MnO2 Doped Bi0.5(Na0.82K0.18)0.5TiO3/P(VDF-TrFE) 0-3 CompositesField Emission of Gallium-Doped Carbon NanotubesStudy on the Polyethyleneglycol-Based Silicon Wafer Wire Cutting Fluid for its Stability ImprovementExperiment Study on Effects of Critical Factors on Quality of Prototypes in Fused Deposition ModelingResearch on the Structure and Friction Properties of the SiC Particles Reinforced Copper-Based Self-Lubricating CompositesAbrasive Wear Characteristics of In Situ TiC-Reinforced Iron Matrix Surface Gradient CompositesUltrafine W-Cu Composite Powder Research ProgressReservoir Fracture Characteristics and its Influence on Oilfield Development in Chang 4+5 Formation in Southern Puziwan AreaThe Non-Isothermal Crystallization Kinetics of Dispersible Nano-SiO2/PA66 CompositesMechanical and Thermal Properties of Reactable Nano-SiO2/polyoxymethylene CompositesEffects of Particle Volume Fraction on Dynamic Deformation Behaviors of B4C Reinforced Aluminum Matrix CompositesSynthesis of Magnetic Fe3O4@TiO2 Nanocomposite and its Photocatalytic PropertyBallistic Impact Testing and Analysis of Triaxial Braided Composite Fan Case MaterialFabrication of Si3N4 Reinforced 316L Stainless Steel Composites by Powder Injection MouldingDensity, Microstructure and Mechanical Property of Large-Scale C/C Composites Prepared by Thermal Gradient CVIThe Tribological Properties of Several PTFE Based Self-Lubricating Composites in VacuumPreparation of Polyaniline/SiO2 Composites by Modified Silica Using Succinic AcidThe Effects of Oil Palm Fruit Bunch (OPFB) Fiber and Coupling Agent Loadings on the Performance of Hybrid CompositesThe Preparation and Properties of MgO-CaO-ZrO2 System Composite MaterialsPreparation and Properties of Ce-Zr-Mn Composite Oxide Oxygen-Storage MaterialsInfluence of Sintering Temperature and Atmosphere on Phase Makeup of SiAlON-Graphite CompositesThe Energy Absorption of Carbon Fiber Reinforced Polymer under Different Impact SpeedSynthesis of Carbon Nanofiber-Titania-Cordierite Monolith Composite and its Application as Catalyst Support on Citral HydrogenationSecuring Superior Properties of Composite (PP+WF) through Central Composite DesignPreparation and Research on Performance of Fluorine Rubber/Metal Composite Sealing BoardsCollision Ansysis of Sandwiched Polyurethane Composite Steel TubeMicrowave Absorbing Properties of MnO2/Ni-Zn Ferrite/Graphite Structural CompositeMicrostructure and Corrosion Resistance of In Situ Al0.983Cr0.017/Al CompositesDamping Properties of Cups-Stacked Carbon Nanotubes (CSCNTs)/RTM6 CompositesTheoretical Study of the Electronic Structures of Li-Doped ZnOPreparation and Photocatalytic Activity of TiO2/FeOOH NanocompositeTensile Properties on Single-Bar Modified Tricot Fabric Reinforced CompositesStudy on Microstructure Characterization of SiCp/Al CompositesThe Effect of Heat Treatment on the Microstructure and Mechanical Properties of Multilayered Composites Welded by ExplosionStudies on the Thermal Conductivity of Al2O3/Epoxy Resin Composite MaterialsProduction of Thermal Insulation Composite Material Based on PolymersIsothermal Crystallization Kinetics of Poly(phenylene Sulfide)/ZnO CompositesInvestigation on Rapid Prediction of Elastic Properties for Woven Fabric CompositesPreparation and Characterization of Regenerated Nanocomposite Made from Bacterial Cellulose/PMMAEffect of the Addition of Nano-?-TCP on the Microstructure of Mg-Zn-Zr AlloySynthesis, Characterization and Photocatalytic Properties of CdS NanorodsStudy of the Nano Material Using Diisopropylamine as Replacing SolventPreparation and Application of Core-Shell PMMA/Chitosan NanoparticleCatalytic Thermal Decomposition of Ammonium Perchlorate Using Cu/Cr Hydrotalcite Derived Nanocomposite OxidesA Simple Method for Controlling the Morphology of CuO Nanostructures by DropletMesoporous Nano Carbon Sorbents for Separating Different BiomoleculesSelenium Nanoparticles Synthesized via a Facile Hydrothermal MethodSynthesis and Characterization of Co-Ce Codoped TiO2/SiO2/NiFe2O4 Magnetic Mesoporous MicrospheresSynthesis of Spherical SrCO3 Powders by Ultrasonic WavesPreparation and Luminescence Property of Multi-Walled Carbon Nanotubes/Europium Doped Yttria Oxide HybridsInvestigation on the Large-Scale Synthesis of PbSe NanocrystalsRapid Solvent-Free Melting Synthesis of Tungsten Nitrides with Lamellar, Solid Spherical Nanostructures at a Low TemperatureThe Analysis of Noises of Flows across the Superhydrophobic Surfaces with Microscale StructuresStudy and Application of Nanomaterials in Drilling FluidsPreparation of CuS Hollow Microsphere by a Simple Hydrothermal Method and its Catalytic PropertyFabrication of Poly Phosphoric Acid into Polyacrilonitrile Composite NanofibersAdsorptive Removal of Rhodamine B from Aqueous Solutions by Carbonaceous MicrospheresEnergy Band Calculation of Spiral Single-Walled Carbon NanotubesSynthesis of MoO3 Nanostructures and their Photocatalytic PropertiesSynthesis and Optimum of Silver Selenide Nanopowder via Room Temperature Conversion MethodThe Effect of Strain Rate on the Tensile Behavior of Electrodeposited Nanocrystalline Ni-Co AlloySynthesis of Magnesium Oxychloride Nanowhisker by Microemulsion MethodFormation of Cylindrical Nanoholes in Heavily Doped P-Type Si(100) Substrate via Pt Nanoparticles-Assisted Chemical EtchingSynthesis of Highly Ordered Silver Nanowire Arrays with SERS ActivitySolvent Mediated Structure Control of Hierarchical CoS NanostructuresFormation and Structural Characterization of Novel K2Ti6O13 NanobeltsPreparation of ZnO Nanostructures and their Self-AssemblyThe Preparation of Silver Nanowires and the Study of SERS Activity of Single NanowireStudy of Degradation Function by the Composition of Nano Bi2WO6 and GraphineMorphology Modulated Preparation of PbWO4 Nano- and MacrostructuresResearch on Preparation of Nanocomposite Antibacterial AgentStudy on Precursor Preparation of Co3O4 Nanometer Particle and its Thermal DecompositionPreparation and Properties of Nanocomposites Containing FGF-2, other Related Dressings and the Primary Animal TestsHydrothermal Synthesis of 3-Dimensional Flower-Like Y2O3:Eu3+ Microstructures and the Luminescence PropertiesSynthesis of Fluorinated Silica Nanoparticles and the Wetting Prevention AbilityPreparation and Application of Microencapsulated Flame Retardant Containing Phosphorus-SiliconThe Study on Tribological Properties of the Nanoparticles Additives in LubricantElectrooxidation for Methanol on Pd Nanoparticles Modified Electrodes in Alkaline MediumEffect of Zinc Substitution on Microstructure and Antibacterial Properties of Cobalt Ferrite Nanopowders Synthesized by Sol-Gel MethodsFragrance and Flavor Microencapsulation TechnologyPreparation of Au@Ag Core-Shell Nanorods and Investigation of its Surface PlasmonSurface Morphology and Texture of Nickel Crystal Micro-Casting by Electroforming under Magnetic FieldDNA/AuNP Fluorescent Detecting Nano-DeviceReaction Mechanism Study on Combustion of Micro Nanometer Iron PowderField Emission Properties of the Single-Wall Carbon Nanotubes Synthesized by Arc-Discharge MethodSynthesis of BaMoO4 Nanocrystallites Using Sol-Gel ProcessStudy on Stabilized of Poly(Vinyl Alcohol) Nanofibers Based Sandwich Structure Purification MaterialPhotoluminescence Properties of ?-SiC Nanoparticles by Electric-Pulses Discharge in Liquid-Phase CompoundHeteroe-Pitaxial Growth and Optical Properties of SnO2 Nanowires on ZnS NanobeltsFunctions of Cotton Yield Response to Soil Salinity in Akesu River Irrigation DistrictA New Type Battery Equalization Circuit of Electric VehicleSynthesis and Electrochemical Properties of KMn8O16 NanorodsPortrait of China?s R&D Activities in Nano-Science and Nanotechnology in Bibliometric StudyStudy of Adhesion in Steels Surface HardenedStudy on the Flow Stress Curve of the Warm Deformation of Medium Carbon SteelPreparation of Paclitaxel-Loaded Microspheres with Fe3O4 Nanoparticles and Study of their Target-Orientation and Sustained-Release PropertyEffect of Cooling Rate on Microstructures and Mechanical Properties of X80 Pipeline SteelState Analysis on Reactor Furnace Pipe Used over a Design CycleProduction of as-Cast High Strength Toughness Ductile IronInfluence of Tin on Properties and Corrosion Behavior of Q125 Grade Tube Used in Deep WellEffect of Ferrite Grain Size on the Yield-Strength Ratio of Low-Carbon Alloy SteelThe Effect of Nb on the Microstructures and Hardness of Quenching-Partitioning-Tempering Medium Carbon SteelsIron Ore Sintering Process Based on Alternative Gaseous Fuels from SteelworksFracture of High Carbon Microalloyed Steel Bars Used for Fracture Splitting Con-RodsStudy on Bimetal Compound Casting Technology of HammersEffect of Nitrogen on the Mechanical Properties of Heat-Resisting SteelThe Impact on Pellets Quality by Semi-Self-Fluxing Iron PowderStability of Reversed Austenite in 9Ni SteelModeling and Optimizing Rolling and Cooling Processing-Parameters for C-Mn-Si Economical Dual Phase Steel Produced on CSPEffect of Annealing Time on the Microstructure and Texture of Interstitial Free SteelThe Microstructure and Characteristic of 410L Stainless Honeycombs Fabricated by Extruding and SinteringEffect of Tempering Temperature on the Microstructure and Mechanical Properties of a 0.1C Steel with High Strength and Low Yield RatioInfluence of Austenite Grain Size on the Crystallography of Allotriomorphic Ferrite in a Low Carbon SteelCleanliness Evaluation for 55SiMnMo Steels Produced by EAF?LF?VD?Billet Casting ProcessEffects of Normalizing Annealing on the Recrystallization Texture of 4.2wt.%Si Non-Oriented Electrical Steel Thin SheetsStudy of the Ti-Mn-Al-Si-O-S Complex Inclusions Inducing Intragranular Acicular FerriteInfluence of Vanadium on Microstructures and Mechanical Properties of High Strength Normalized SteelEffect of Strain Rate on Nb(C,N) Precipitation in Micro Alloy Steel SlabHigh-Strain-Rate Superplasticity of Big Grains in Spray Forming Ultrahigh Carbon Steel Contain 1.6wt.%Al(UHCS-1.6Al)Research of the DWTT Fracture of X70 Pipeline SteelEffect of Boron Mud on Melting Temperature of CaO-Based Steelmaking SlagShield Performance of High Boron Alloyed Stainless Steel Composite PlateThe Tempering on Microstructure and the Yield-to-Tensile Ratio of High Performance SteelsComparisons of Laser Cut and Water Cut for Silicon Steel PlateEffect of Rare Earth on Inclusions and Impact Property of Ferrite Stainless SteelThe Morphology and Content of d Ferrite in Non-Equilibrium Solidified 0Cr18Ni9 Austenitic Stainless SteelMicrostructures, Mechanical Properties and Textures of Deep Drawing Dual-Phase SteelCreep-Fatigue Interaction Life Prediction for P91 Steel Based on Improved Elman Neural Network ModelThe Recrystallization Behavior Study of 3%Si Nonoriented Electrical SteelFormation of the {111} and {111} Recrystallization Texture in Deep Drawing Low Carbon SteelEffect of Stabilizing Heat Treatment on Intergranular Corrosion Resistance of Welded Stainless Steel AISI 321Study on Roll Wear Model for Hot Strip MillCorrosion Behavior Analysis of Various Ions in the Soil to the X80 Buried PipelineResearch on Micro Inclusions of SS400 Steel in Slag Washing ProcessDevelopment on a New Interstitial-Free Steel with ?r =0.3Effect of Alloying Elements Ti and Nb on Microstructure and Performance of 3.5Ni SteelExperimental Research on Sintering Amorphous Based Material with Iron-TailingsEffects of Composite Nickel-Base Boracic Brazing Filler on the Boride near the Brazing Seam of 316L Stainless SteelMicrostructure Transformation of Continuous Cooling of Nb-Ti Micro-Alloyed Low Alloy SteelEffect of Titanium on Microstructure and Phase Composition of High Boron Alloyed Stainless SteelExperimental Research on Mineral Processing Technique of a Brazilian SpeculariteExperimental Research on the Iron Separation from an Ultra Poor Iron OrePreparation, Decomposition and Characterizations of Bangka - Indonesia Ilmenite (FeTiO3) Derived by Hydrothermal Method Using Concentrated NaOH SolutionThe Effect of Cold Asynchronous Rolling Technique on High Manganese Steel Mn13Effects of RE on Critical Cooling Rate of Bearing-B SteelThe Effects of the Sputter-Etching Parameters on the Formation of Conical Protrusions on the Surface of SUS304 Stainless SteelStudy on Microstructures and Properties of 22Mn2SiVBS Steel on Different Cooling RatePrimary Recrystallization Texture in Rolled (Fe81Ga19)99B1 SheetThe Application of SunyPCC800 in CFB BoilersEffect of Ta, Nb and V Additions on the Microstructure and Mechanical Properties of (W,Ti)C-CoThe Properties of YSZ-Ni-Cr Cermet Fabricated by Sol-Gel MethodStudy of Nb-Zn-Mn Co-Doped Ba(Ti,Zr)O3 CeramicsA Rational Way to Prepare BaTiO3 CeramicsFabrication and Effects of Different Average Grain Sizes on Thermal Conductivity of Nd:YAG CeramicsEffect of Glass Additions on Ca[(Li1/3Nb2/3)0.92Zr0.08]O3-d Microwave CeramicsEffect of Roasting Process on the Properties of Alumina-Based Ceramic CoreMicrostructure and Toughening Mechanism of ZrO2 CeramicEffect of Different Nucleating Agents on the Microstructure and Properties of LMAS Glass-CeramicsThe Influence of Al2O3-AlN Compound Additive on the Crystallization Characteristics and Properties of Fused Quartz Ceramic MaterialsStudy on Preparation and Property of WoodceramicsMicrowave Dielectric Properties of Low-Temperature Sintered Ca[(Li1/3Nb2/3)0.95Zr0.05]O3-d-0.04TiO2 CeramicsEffect of MgO on the Microstructure of Polycrystalline Nd:YAG Ceramics and its Action MechanismInfluence of CeO2 and Sintering Parameters on the Performance of Vitrified Bond Diamond AbrasiveMethod of Improving Dielectric Properties of AlN CeramicPreparation and Application of Magnesium (II) 2,2,2-Trifluoroacetate as an Efficient Catalyst for the Catalytic Preparation of 1-Amidoalkyl-2-Naphthol DerivativesPreparation and Characterization of SrO-Fe2O3-FeO-SiO2-B2O3 System Hexaferrites Glass-CeramicsSynthesis of CaO-Na2O-Fe2O3-FeO-B2O3-SiO2 Glass-Ceramics for Hyperthermia Application by Aqueous Solution-Melt MethodAnalysis of Copper and Copper Alloys Electric Components Short Circuited Melted Mark Metallographic StructureStudy on the AZ31B Magnesium Alloy in the Application on High-Speed TrainsEffect of Cr and Ni Contents on Microstructure and Properties of High Boron Stainless Steel Composite PlateMicrostructural Evolution of the [001] Oriented Single Crystal Superalloy DD6 Creep at 760?C and 785 MPaSupercapacitor Fabrication by Titanium AlloyStudy on the Quenching Microstructure of Fe-0.36C-1.4B AlloyAgeing Precipitation and Strengthening Behavior of the Spray Formed Al-Zn-Mg-Cu AlloyThe Microstructure and Mechanical Properties of Super-High Strength Al Alloys by Spray FormingResearch on a New Type Grain Refiner Refining a-Al by Adding Molten State and Diluted Al-Ti-B-RE Master AlloyEffects of Ni/Ti Ratio and Heat-Treatment on Transformation Temperature, Mechanical Properties and Shape Recovery Strain of Ni-Ti-Nb AlloyEffect of Rolling Deformation to Microstructure and Properties of Mg-8.5Li-1Al-1Ce AlloyFatigue Behavior of GH4169 Alloy up to Very High CyclesEffect of Ti Content on Microstructure and Hardness of A356 AlloyFractal Characteristics of Primary Phase Morphology in Semisolid A356 AlloyThe Effect of Cold-Drawing on Recovery Stress of Ni-Ti-Nb Shape Memory AlloyStudy on the Mechanical Property and Microstructure of Surgical Implanted Ti-6Al-7Nb Titanium AlloyInfluence of Gd Addition on the Structure and Capability of Ni-Mn-In Metamagnetic Shape Memory AlloysEffects on the as-Cast Structure of 7075 Aluminum Alloy by Treating with Electrical Pulse InoculationAdjusting Microstructure and Magnetic Properties of Ni-Mn-In Metamagnetic Shape Memory Alloys by Addition of GdSome Studies on Preparation of Large Spray Deposited Aluminium Alloy Tube PreformStudy on Cyclic Load Creep Test of the Nickel-Based Super Alloy K403Study on Present Situation and New Trends of the Electrodeposition of Nickel-Cobalt AlloyThermal Flow Deformation Behavior and Mechanism of As-Cast and As-Extruded Burn Resistant Titanium AlloyExperimental Study on the Mineral Processing of a Certain Low Grade Copper-Molybdenum Ore in XinjiangThe Influence of Composition on the Material Structure and Performance of 3104 Aluminum-Alloy Canbody MaterialInfluence of Titanium Alloying Element Substrata on Bacterial AdhesionEffect of KBF4 Addition on the Microstructure of Mg-6Zn-1Si AlloySite Preference and Elastic Properties of 3d Transition Metals Alloying Addition in Ductility YAg AlloysBending Properties of AA7055 Aluminum Alloy Reinforced with In Situ TiB2 ParticlesThe Influence of Ni on the Microstructure of Co-Base ODS AlloysAtomistic Simulation for the Site Preference of Tb3(Fe28-XCoX)V1.0 CompoundsFormation Mechanism of Low Angle Boundary of DD6 Single Crystal Superalloy BladesInvestigation on Dislocation Network in Al-5.8Cu Aluminum Alloy Impacted PlateA Study on Influence of Annealing and Aging on High Temperature Internal Friction in Al-Zr AlloyStudy of Crystal Structural about La2/3(Ca(1-X)ZnX)1/3MnO3Precise Re-Os Dating of Molybdenite from the Northern Dabie Molybdenum Belt in Central China and its Geodynamic ImplicationsSynthesis and Structure Determination of Carbonized Nano Mesoporous Materials Based on Vegetable Raw MaterialsComparative Analysis of Bacterial Diversity for Cutlassfish (Trichiurus haumela) during Cold Storage by the Culture-Dependent and Culture-Independent MethodsEffect of Modified Atmosphere with Varying O2 Concentrations on the Quality of Packed Pacific White Shrimp (Penaeus vannamei) during Cold StoragePreparation of High Water Absorption and Retention Material by Graft Copolymerization of Calcium Lignin Sulphonate with Acrylic Acid and AcrylamideResearch on Viscoelasticity and its Influence Factors of Polymer SolutionStructure of Patinopecten Yessoensis Shell is a Biomimetic Example of CompositeHow to Strengthen the Sense of Solid Wood of Frame-Board Type FurnitureUsing RAFT Polymerization to Synthesize Potential Drug/Gene Delivery SystemRheological Property and Miscibility of Lignin-Based LDPE/EVA Blends with CompatibilizerSynthesis of Graft Copolymer by Using Acrylamide and Methacryloyl Chloride Guar Gum and its Adsorption Behavior to Metal IonsSynthesis and Characterization of Poly Phenoxyl Bisphenol-S PhosphateFabrication and Characterization of Poly L-Lactic Acid/Modified Nano-Hydroxyapatite Composite Fibrous ScaffoldDissolution of Cellulose in [Amim]Cl/Lithium Salts Solvents SystemResearch Progress on Tissue Engineering of Neural Stem CellsEffects of Calcination upon Properties of Needle-CokesAnalysis for Stress-Strain Curve during Stretching Coarse Yak Hair with Different Pretreating ConditionStudy on the Variety Identification Method of Bast FibersMechanical and Thermodynamic Properties of Chlorophyll-a Surfactants at Air-Water InterfaceStudy on Multi-Elements in Traditional Chinese Medicines Ophiopogon japonicus and Lotus Seeds by the ICP-AES with Microwave DigestionStudy and Application on Layered Polymer Injection with Concentric StringEffect of Hyperbranched Polymer on Crystallization Kinetics of Isotactic PolypropyleneEffect of Process Parameters on Jet Length in Electrospraying of Thermoplastic PolymerPreparation of Rigid Flame Retardancy Polyurethane Foam Material with Difficult Combusted DegreeProperties of High Solid Content UV Curable Waterborne Polyurethane Dispersions with Different C=C ContentThe Reaserch of Displacement Oil of the Polymer System with the Low Interfacial Tension ConditionsEvaluation of the Thermal Stabilization Effect of Maleic Anhydride Derivatives on Polyvinyl ChlorideSynthesis of Hydrophobic Modified Polyacrylamide Functional Materials in Supercritical CO2Discussion upon the Draft Ratio Affecting PEN-PPS FilamentsResearch on Corrosion and Scale Inhibition Performance of HEDPSynthesis and Phase Behavior of Polysiloxane Nematic Liquid Crystal ElastomersShear Studies on Polymer Flooding Systems with High ConcentrationsPreparation and Characterization of Elastomers Based on Polydimethylsiloxane/Poly(methyl methacrylate) BlendsAnalysis and Prediction of Damping Properties of Multi-Layered Organic Hybrid Materials Consisting of Polarized Polymers and Small MoleculesCharacterization and Modification of Nitrile Rubber in the Transformer OilCapacitance Fading Induced by Degradation of Polyaniline: Cyclic Voltammetry and SEM StudyThe Research of EVA to PLA/E-AA-GMA Blend Materials TougheningEffect of CMCS on Vulcanization Kinetics of Natural RubberInfluence of Chiral Maltose on the Mesomorphic Properties of Main-Chain Liquid-Crystalline PolymersManufacturing of Porous Biomaterials for Dental Implant Applications through Selective Laser MeltingMagnetism Study of Spin Correlations in Bi0.5Ca0.5MnO3Synthesis and Fluorescence Property of Novel Zn2+ Schiff Base ComplexOxygen Content Change Characters and the Influence Superconductivity in the Doped YBCO SystemsResearch on Two-Stage Three-Phase Photovoltaic Grid-Connected SystemRecent Progress in Developing Magnetic Properties of Mn-Doped ZnO Diluted Magnetic SemiconductorsStudy on the Crystal Size of PCBM in Organic Photovoltaic CellsElectrogenerated Chemiluminescence and Sensory Property of Rubrene Microparticles Immobilized on ITO ElectrodeThe Two-Photon Excited Fluorescence of Pyrazine DerivativesThe Optical and Structural Properties of InxGa1-XN/GaN Multiple Quantum Wells by Metal Organic Chemical Vapor DepositionStudy on Ultrasonic Electroforming Ni-P Coatings on NdFeB Permanent MagnetUpconversion Luminescence Property of Nanocrystalline Y2O3:Pr3+,Yb 3+The Effect of Environment on Photovoltaic Module EfficiencyTheoretical Study on Electronic Structures and Spectroscopic Properties of Indene-C60 Monoadduct (ICMA)An Investigation of Half-Metallic Ferromagnets Behavior in Hg2CuTi-Type Heusler Alloy Ti2FeAl by Using GGAEffect of Nb Doping on Electronic and Magnetic Properties of Heusler Alloy Ti2NiAl with Hg2CuTi-Type StructureTemperature Dependent Characteristics of 1D Photonic Crystal with DefectsA New Design of Photonic Crystal Fiber with Fattened Dispersion and Low Effective Mode AreaResearch on the Relationship between the Spray Overlap Width and the Photoresist Film Thickness and UniformityResearch on Composite Powder and Magnet Properties of Bonded NdFeB MagnetsGiant Magnetoresistance in (Ni60Co30Fe10/Cu) Trilayer Growth by Opposed Target Magnetron SputteringSynthesis and Characters of Fe3O4/AMPS Magnetic Composite MaterialSynthesis and Luminescence Property of Poly(phenylenevinylene) with Alkoxyl Substituents under the Ultrasonic IrradiationOptimization of the Two Parameters of Classical Blaze Grating in Littrow MountA Study on Gadolinium Sensitized Chemiluminescence SystemInfluence of Gd3+ Doping Quantity on Magnetic Performance of Co2Z HexaferriteAscertainment of the Figure of Merit for the State-of-the-Art Thermoelectric Materials via TemperatureCurrent-Voltage Characterization on Au-DNA-Au Junctions under the Influence of Magnetic FieldThe Application of Symmetrical Equation of Diffracted Wavevectors in Integral Theory of GratingsTwo-Photon Luminescence in Yb:YAGThe Research Progress of Embedded Solid Lubricant MaterialsNew Luminescent Mesoporous Material Covalent Bonded with Europium (III) Organic/Inorganic/Polymeric HybridThe Research on Wear Resistant Polyurethane Hose Capable of Being FlatFunctionally Graded Plates under Thermal and Moisture EffectsSynthesis and Properties of Acrylate Modified Waterborne Polyurethane EmulsionStudy on Release of Anion Concentration about Negative Oxygen Ions FabricUsing Paper as Reinforcement in Silty SandEffect of Multi-Material Substitutions on Static and Dynamic Properties of Electric VehiclesInfluence of Construction of Textile Material on Performance of Warp SizingNon-Isothermal Crystallization Behavior of Poly(trimethylene Terephthalate-Co-Isophthalate) CopolyestersFacile Synthesis of near-Infrared-Emitting Water-Dispersed CdHgTe/CdS/ZnS Core/Shell/Shell Quantum DotsStudy on the Fiber Bending Deformation during Knitting ProcessComparative Research of the Sizing Performance of the Compact Spun-Yarn and Ring Spun-YarnSound Insulation Property of Warp Knitted FabricsTensile Property Test Analysis of Double Protein Modified FiberCreation Based on Superhydrophobic Soot Waterproofing Materials Obtained in FlamesSynthesis of Novel Separation Materials Based on Molecular Imprinting TechnologyCharacterization of Indium-Doped CdZnTe Crystal Grown under Te-Rich ConditionsPhysical Chemistry of Fermentative Hydrogen Production MechanismA Geometric Analysis of the Loop Form of a Tricot Stitch Knitted FabricAnalysis of the Influence of Static Flow Resistance on the Sound Absorption Properties of Aluminum FoamApplication of the KH560 on Improving the Interface Fastness of Composites of Starch and Cotton FiberReduced Graphene Oxide Nanosheets Functionalized with Bile Salts as Support for Electrochemical CatalystsStudy on the Supercritical CO2 Art of DyeingThe Dynamics and Governance of Tongxiang Sweater Cluster Based on GVCThe Study on Properties of Kapok Nonwoven MaterialPhotocatalytic Degradation of Nanometer TiO2 Sol Composed Fabric to DyeSynthesis and Photophysical Characterization of Dendritic 8-Hydroxyquinoline ComplexesPreparation and Characterization of the Hydrophilic CopolyesterStudy on the Wool-Solospun Spinning TechnologyThe Influence of Electrode Materials on the Electrical Degradation Process of Lead Zirconate Titanate under Harsh Operating EnvironmentBiomimetic Synthesis of Prismatic Calcite Mesocrystals in the Presence of Nonionic CopolymerSynthesis and Characterization of Polyacrylates Side-Chain Liquid Crystalline Polymer via Atom Transfer Radical PolymerizationSynthesis and Spectral Properties of Polymeric Dye from Waste PlasticA High-Throughput Screening of N-Carbobenzoxy-L-Tryptophan Imprinted Polymers and their Application for Monolithic Chiral Stationary PhaseThe Study on Nano-Silica Modified Phenolic Resin Used as the Magnesite-Carbon Brick BinderWound Dressing Utilising Nonwoven Wool MatrixNumerical Simulation for the Optimization of the Angle of the Velocity of the Hydrogen in the High Performance Hydrogen Bell-Type AnnealersResearches on the Fixation Performance of Chitosan and its DerivativeDFT Study on Structures, Stabilities and Electronic Properties of Tert-Butyl Silsesquioxanes Si2nO3n(CMe3)2n (n=1-6)Elastic Modulus of Rhombus Dodecahedron Closed-Cell Cellular Materials4.9tex ? 2 Cotton / Pearl 65/35 High Count Blended Yarn Spinning Process DesignOptimization of Separation Process of Waste Polyester-Cotton Fiber by Using Response Surface AnalysisThe Antistatic Research of Polyester/Nylon Fabrics Finished by Triblock Copolymer Containing Organic SiliconResearch on Open-Cell Rigid Polyurethane Foam as Vacuum Insulated Panel CoreEffect of Laundering Temperature on the Color of Brown Naturally Colored CottonInfluence of Fractal Structure on Light Absorption of down Fiber AssemblyStudy of the Hydrophobic Modification of Chromium Sesquioxide with Lauric AcidPreparation and Characterization of Ternary Composite Composed by Chitosan, Porphyrin Derivative and Single-Walled Carbon Nanotubes (SWCNTs)Fuel Cell Electric Vehicle Energy Management Strategy Simulation StudyAdsorption of Cu (II) from Aqueous Single Metal Solutions by Bagasse Pith Chemically Modified with EDTA Dianhydride (EDTAD)The Investigation of Dyeing Properties of Anion Modified Linen FibersInfluence of Heat Insulation Material on Thermal Stress of Long NozzleSynthesis and Luminescence Characteristics of Mg (II) Complexes with 5-Bromosalicyladehyde-NicotinoylhydrazoneEffects of BaF2 Addition on Properties of Strontium Barium Niobate Based Glass-Ceramics for Energy Storage CapacitorsDifferent Natural Season Weathering of B.mori Silk FabricStudy on Crystallization Kinetics of Li2O-Al2O3-TiO2-P2O5 Glass by Non-Isothermal TechniqueBiological Performances of Titanium Scaffolds: A ReviewStudy on Coal Roadway Supporting Parameters of Broken Thick Top-Coal Large SectionSimulation on NOx Generation of RSP Calciner for Cement ProductionResearch on Perfomance of Vulcanized Eucommia Ulmoides Gum Blending with AsphaltExperimental Research on Strengthen Mechanism of NaOH on Light Wall Materials Prepared from Crushed Brick PowderThe Performance Study of the Open Channel Concrete in Cold AreaResearch Progress of Energy Conservation Architectural CoatingsInfluence of Nano-Clay on the Performance of phosphoaluminate cementThe Study on the Application of Material Media in the Modern Decorative ArtProperties Research on Chiral Liquid Crystalline Polysiloxanes Containing Chiral and Electron Withdrawing GroupStudy on Full-Slag Concrete FeasibilityThe Effect of Asphalt Binder Aging on Fatigue Performance of Evotherm WMAExperimental Research on Durability of Fair-Faced ConcreteExperimental Study of the Characteristics of Damp and Efflorescence Mechanism for Building BrickFlexural Behavior of near Surface Mounted CFRP Bars Strengthened Reinforced Concrete BeamsStudy on Water-Rock Interaction in Sea and Freshwater Transitional ZoneResearch on Aging Properties of Tourmaline Modified AsphaltEffect of Gradation and Cement on the Properties of Soil-Cement MixturesProperties Improvement of Fired Clay Bricks Incorporating with Cigarette ButtsInvestigation of Road Performance and Colloidal Structure of Tourmaline Modified AsphaltDry Shrinkage and Compressive Strength of Blended Cement Pastes with Fly Ash and Silica FumeThe Application of the Deep Carbonized Woods to Building SkinsMechanical Analysis and Numerical Simulation of Steel-Ring and Rigid-Frame Restrained ConcreteExperimental Study on Rock Breaking with Impacting Water Jet by Modulation of ChaosExperiment Study of Influence Factors on High-Temperature Stability of Closely Gap-Graded Bituminous MixtureResearch on the Adobe Wall of Traditional Civil Structure Dwelling in Tianshui & GuanzhongExperiment Study of Reclaimed Asphalt Pavement Gradation Fluctuation on Influence of Central Plant Hot Recycled Mixture PerformancePreliminary Study about the Sediment Carrying Capacity FormulaThree-Dimensional Sediment Numerical Simulation of Wenzhou Oufei Tidal Flat Sea AreaExperimental Research on Dynamics Characteristics and Damage of ALC WallboardService Life Prediction of Reactive Powder Concrete due to Seawater InfiltrationInfluence of Air Content on the Compressive Strength of ConcreteAnalysis and Evaluation for Longxihe Dangerous Rock StabilityA Method Based on Neural Network for Risk Prediction of the Typical Moraine-Dammed Lake Outburst in the Himalayan RegionLaboratory Fast Corrosion Test of Plain Steel Bars in Concrete BeamsStudy on Compaction Characteristics of Solidified Mud with Different Proportion of Curing AgentA Homogenisation Procedure for the Steady State Periodic Forced Response of Laminated Composite Beams at Large Vibration AmplitudesProduction of Bitumens from Coal Sources Modified by Elementary SulfurResearch on the Influences of the Molding Processes of TOR Asphalt Rubber Mixtures upon the Pavement PerformanceReview of Researches on Carbonization of Concrete: Influencing Factors and Forecast ModelsStudy on the Rule of Temperature Descent for Large Stone Asphalt MixturesKyanite Ore Beneficiation Experimental Research in HebeiPerformance and Mechanism Study on C50 Micro-Expansion Polypropylene Fiber Reinforced Anti-Cracking Pumping ConcreteStudy on the Factors Affecting the Anti-Seismic Performance of Steel Reinforced High-Strengh Concrete ColumnsThe Discussion of Iron Wire Fire HazardStudy on Influencing Factors and Control Measures of Diaphram Wall Panel TrenchResearch on Accelerated Corrosion of Steel Bar in Reinforced Concrete ComponentsProblems and Solutions of High-Rise Buildings in Coupling Beam DesignUsing New-Type Composite Silicate Heat-Insulation Material to Improve Residential Energy Efficiency in Regions of Cold Winter and Hot SummerEvaluation of the Strain-Softening Law of Concrete from the Fracture TestStudy of the Effect of Boron Carbide Content in Concrete as Radiation Shielding ApplicationMechanical Properties of Rocks Used for the Construction of Vehicular Bridges Supported by Pier MasonryThe Study of Using Fly Ash to Produce Ultra High Performance Fibre Reinforced ConcreteObservation about Architecture Skin Using New MaterialContrastive Study on Mineralogy of Brazil Kaolinite and Beihai KaoliniteFly-Ash Usage in New Cement-Based Material for Concrete WaterproofingAn Experimental Study on Ductility of Fiber-Strengthening ConcreteOn Performance & Application Prospect of Inorganic Materials Used for Exterior Walls Insulation in Hot Summer and Cold Winter ZoneExperimental Study on Flexural Behaviors of All-Lightweight Aggregate Concrete SlabsEffect of Anisotropy on Shear Wave Velocity in WoodTest on Corrosion Resistance of GFRP Anchor BoltExperimental Study on Mix Design of Plastic Concret with Lower Elastic Modulus and Higher Impervious CoefficientExperimental Investigating of Latex Cement as Similar Material Simulating Soft Rock CreepApplication of FLAC to Study on Anchorage for Mountain SlopeThermal Conductivity and Strength Properties of Soil-Based Lime Adobe Stabilized with Pottery Burnt Hull AshStudy and Application of a Modified Agent GHPC-1 for Green High-Performance ConcreteThermal Stress Numerical Simulation on Concrete Hydration Heat of Giant Floor in Deep Foundation PitEffect of Polypropylene Fibers on the Toughness of Concrete MaterialsStructural Performance of Chinese Larch PlywoodDevelopment of a Fire Resistant Low Alloy Steel for ConstructionDivision of Frost Damage Grades and its Prevention Measures in TunnelThe Engineering Technology Index Analysis of the Low-Carbon BuildingA Novel Hydrophobic-Induced Method for Water Soluble Silk FibroinFinite-Element Analysis on Carbon Fiber Reinforced Polymer (CFRP) Plates Reinforcement for the Rigid Joints of Steel StructuresThe Matching of Flow Control and Structure Parameters for the Bitumen Foaming TechnologyAnalysis of Structural Properties and Seismic Performance of a TempleStudy on the Structural and Aseismatical Performance of Multi-Storey Ancient Chinese Timber Structure Shangyou Tower of Palace StyleOverall Dynamic Analysis of K-Reticulated Shell Structure with BRB in Severe EarthquakesResearch and Analysis to Find the Optimal Parameters to Reducingharmful Vibrations of the Inverted Pendulum SystemSeismic Analysis of Soil Nailed Wall Using Finite Element MethodPractice and Theoretical Thought on the Supporting for Soft RockStudy of Micro-Inclusion of Beam BlanksGroove Resistance Simulation Analysis and Fault Detection of Aluminum Reduction CellResearch on Evaluation System of China?s Energy Security Considering Energy TransportationA Single Ion Conducting Gel Polymer Electrolyte Based on Poly(lithium 2-Acrylamido-2-Methylpropanesulfonic Acid-Co-Vinyl Triethoxysilane) and its Electrochemical PropertiesSuperconducting Magnetic Energy Storage SummarizeStudy on the Application of N,N'-1-Ethyl-4-Butyl, Triethylene and Diamine Hexafluorophosphate in SupercapacitorsAn Investigation of the Electrochemical Hydrogen Storage Performances of the RE-Mg-Ni-Based A2B7-Type Electrode Alloys Prepared by Melt SpinningThe Influence of Interface Silicon Oxide Layer on Photovoltaic Effect of Iron-Doped Amorphous Carbon Film/SiO2/Si Based HeterostructureCdTe Solar Cells on Flexible Metallic SubstratesUsing Natural Dyes to Prepare Nanoporous TiO2 Dye-Sensitized Solar CellPhysical and Electrochemical Properties of a Mixed Lithium Phosphate as Cathode Material for Lithium Ion BatteryPreparation of Zirconia-Yttrium Fibres from Steady Precursor by Sol-Gel TechniqueSummary of Lithium-Ion Battery Polymer ElectrolytesThermoelectric Power Generation System with Loop Thermosyphon and TiO2-NanofluidsEffect of Heat-Treatment on the Activity of Nickel Phthalocyanine Catalysts for Oxygen Reduction Reaction in Acid and Alkaline ElectrolytesCatalytic Processing of Coal into Liquid Fuels: Mechanochemical Activation of CoalThe Preparation and Characterization of a Novel Biodiesel Named Curcas Oil Diethylene Glycol Ether EsterA Survey of Nuclear and Solar EnergyPreparation of Domestic Honeycomb Briquette from Corn Stover and CoalThe Influence of Mechanochemical Treatment on the Acid and Catalytic Properties of Modified Natural ZeolitePolymermetallic Catalysts with Nano-Sized Particles on the Basis of the Palladium and the Potassium HumateThe Analysis of Tianjin Subway Environmental Control SystemEffect of CeO2 Promoter on Catalytic Performance of CuO-ZnO-ZrO2/HZSM-5 Catalyst for Carbon Dioxide Hydrogenation into Dimethyl EtherExperimental Study on Synthesis of Adsorption Material of Porous Zeolite with Fly AshWaste Paper Application in Geotechnical ProjectExperimental Study on Treatment Phenolic Wastewater by Polymerized Silicate Containing Aluminium Sulfate and Magnesium SulfateA Free-Lead and Cadmium of Antimony Ruby Glass Composition and its Preparation MethodAssessment of the Effects of Land Use Change in Upper Catchments of Lake Kivu on its Water QualityOptimization of Preparation Process of La-Ce-Palygorskite Catalysts for NO Decomposition by Response Surface MethodologyResearch on Corrugated Cardboard and its ApplicationPolycarbonate from the Copolymerization of Carbon Dioxide with EpoxideSol-Gel Preparation and Characterization of SiO2/TiO2 Composite Mesoporous Materials with Bacterial Cellulose for Photocatalysis of Methyl OrangeResearch Nanostructurized Carbon-Containing Catalysts on the ?onkeris Clay Base by Physico-Chemical MethodsPreliminary Research on the Uptake Behavior of Ammonium Molybdophosphate for Cesium and the Corresponding Structural TransformationStudy on the Defluorinated Materials of High FluorideStudy on Mechanism of Removing the Organic Matter in Heavy Oil Sewage by the Electric Flocculation MethodInfluence Factors and Kinetic Study on Photocatalytic Degradation of Rhodamine B by Fe-Doped TiO2/Diatomite CompositeEstimating the Energy Carbon Footprint of Huangshan National ParkStudy on the Photocatalytic Degradation of Bisphenol a by La3+ Doping TiO2 under Sunshine IrradiationPreparation of Poly(vinyl Alcohol)(PVA)/peat/clay Composite Beads as Adsorbents for the Removal of Pb (II) and Zn(II) Ions from Aqueous SolutionsStudy on Preparation of Compound Activated Carbon Adsorbent and Effect of Thiophene AdsorptionNew Closed UV Sterilizer Application of Wastewater TreatmentProgress in Modified MBR with TiO2 for Wastewater ReusePreparation of Nanosized TiO2 Synthesized by Sol-Gel Pathway Using Ionic Liquid as Assistant and its Photocatalytic ActivitiesThe Purifying Capacity and Influential Factors of Wetland Soil to PhenolFouling Removal Technology with Intermittent Rotation Spiral-InsertCatalytic Dechlorination of Para-Nitrochlorobenzne in Wastewater through a Nanoscale Nickel-Iron Bimetallic CatalystR&D on Wollastonite of Advanced Materials and Low Carbon ProductsStudy on Treatment of Waste Emulsion with Pulse-ElectrolysisCorrelation Analysis between Single Nucleotide Polymorphism of Fatty Acid Synthase and Fatness Traits in ChickensStudy on Scale Inhibition Performance of Polyaspartic Acid DerivativeStudy the Biodegradation of a Injection Human-Like Collagen HydrogelSynthesis and Characterization of Carboxymethyl Chitosan/Human-Like Collagen HydrogelStudy on the Bio-Composite from Sisal Fiber Reinforced Cellulose AcetatePreparation of Transglutaminase Cross-Linked Tilapia Scale Collagen Microspheres Containing L-Ascorbic AcidThe High-Cell-Density Fermentation of Recombinant Escherichia coli Based on the Control SystemThe Advantage of Automatic Control in Human-Like Collagen Production by Recombinant Escherichia coli BL21Structure of Antheraea pernyi/Bombyx mori Silk Fibroin ScaffoldsSodium Alginate Extraction by Enzyme-Ultrasonic Combined MethodOptimization of the Extraction of Coconut Protein and the Evaluation of Antioxidant and ACE Inhibitory Activities of its Enzymatic HydrolysatesChemical Analysis and Antioxidant Activities In Vitro of Polysaccharide Extracted from Corn SilkPreparation and Electrospinning of Acidified-Oxidized Potato StarchFormation of Silkworm-Like Vaterite via Orientated Attachment ProcessIonic Liquid-Regenerated Cellulose Beads as Solid Support Matrices for Papain ImmobilizationProducing Cellulase on Phanerochaete chrysosporium by Fermentation and Breeding by Induced Mutation of Cellulose-Degrading Phanerochaete chrysosporiumStudy on Biocompatibility of Post-Irradiated Silk Fibroin In VitroEffect of Gamma Irradiation on the Biocompatibility and Biodegradation of Silk Fibroin In VivoCellulose/Collagen Beads Prepared Using Ionic Liquid for Cu(II) Adsorption from Aqueous SolutionsThe Surface Micro-Morphology Transition of Pearls Induced by CeriumIncreased Dissolution of Lignocellulosic Biomass in Ionic Liquid 1-Butyl-3-Methylimidazolium Chloride at High TemperatureNanospheres Conjugated with Hab18 as Targeting Carriers for Antitumor DrugDBD Plasma Induced Mutation in Phosphate-Solubilizing Bacteria Acinetobacter CalcoaceticusYC-5aEffect of PEO on the Hydrophilicity of PLLA Ultrafine FibersBuild and Apply of Granular Sludge Enriched by Phosphorus Accumulating OrganismsA Novel Method for Preparing the Surface Molecularly Imprinted Polymers to Target Isolate Ginsenoside Rg1 and its AnaloguesAntimicrobial Peptides from Musca Domestica Expressed in Escherichia coliFlexural Properties of Bio-Composite Made from Hydrothermally Treated Kenaf (Hibiscus cannabinus) FibresCorrelation Analysis between Single Nucleotide Polymorphism of the Lipoprotein Lipase and Fatness Traits in ChickensA Method for the Introduction of Acetylthiol Groups into Recombinant Human-Like CollagenApoptosis of Human Leukemia Cell Line K562 Cells Induced by HydroxycamptothecineEfficient Syntheses of 2-Chloro-2?-Deoxyadenosine (Cladribine) from 2-ChloroadenosineStudy on the Photosynthetic Efficiency of the Michelia alba Leaves by Using Photo-Acoustic Tomography Spectroscopy TechnologyEffect of ADM on Proliferation and Apoptosis of Human Gastric Cancer Cell SGC-7901Hydrolysis Kinetics of Cornstalk in Formic Acid SolutionHydrolysis of Bamboo Fiber for Production of Fermentable Sugars in Saturated Formic AcidBiosorption of Uranium by Deinococcus radiodurans Cells under Culture ConditionsElectrodeposition of ZnO Nanosheet Structures and their Application for Glucose BiosensorUtilization of Scoria as PRB Reactive Media for the Removal of Petroleum Hydrocarbon from GroundwaterDilute Sulfuric Acid Pretreatment and Enzymatic Hydrolysis of Corn Stover into Fermentable SugarsSynthesis and Electroluminescent Property of Bis{2-(naphtha [3,4]imidazol-2-Yl) Pyridinato} MagnesiumHydrothermal Oxidation of Phenol with H2O2The Stannous Complex of Succinimide as Multifuctional Additive for Lubricating OilsPreparation and Mechanism Analysis of High-Efficiency early Strength AgentA Novel Approach to Get Bisphenol-a Bis(Diphenyl phosphate)Synthesis and Properties of Silicone Modified Acrylate EmulsionIntegrating Grey Relational Analysis with Combination Weighting for Selecting Bearing MaterialApplied Research of the Flexible Epoxy Resin Curing AgentCalculation Model of Activity for Slag System of CaO-SiO2-Fe2O3Impaction of Graphite Type on Performance of Polycrystalline Diamond PowderA New Type of Compatilizer and its Application in Polystyrene Ether/Nylon 66 AlloyResearch on the Rheological Properties of Domestic and International PPS ResinEffect of Applied Voltage on Polymer Aggregation in Electrospraying of Thermoplastic PolymerStudy on the Characterization and Application of Poly-Silicate Magnesium Ferric Sulfate Borate (PFMSSB)First-Principles Investigation of ThO2Study of Fibrous AlPO4-5 via Hydrothermal Conditions: Morphology Evolution and Growth MechanismSynthesis, Characterized and Biological Activities of Chalcone DerivativesDielectric Characteristics of Hydrated ParaffinPredicting Impact Sensitivity of Heterocyclic Nitroarenes from Molecular Structures Selected by Genetic AlgorithmEffect of BPR on the Preparation of Nb-Base Powder via Ball MillingThe Influence of the Viscosity of Edible Ink to Ink-Jet Printing Drop StateStudy on Preparation and Hydrophobicity of MTES Derived Silica Sol and GelSynthesis of Ba2B5O9Cl Whiskers via Flux MethodFlame-Fusion Growth of Rutile Single CrystalEffects of Supercritical Carbon Dioxide on Interfacial Properties of Carbon FiberSynergistic Effects of Colour Protective Agent and Modified Atmosphere Packaging on the Preservation of Litchi (Litchi chinensis Sonn.) FruitDetermination of Mineral Elements in Fermented Liquid with Temperature-Controlled Wet Digestion and Flame Atomic Absorption SpectrometryOD-Characterization of the Symmetric Group S49Morphology and Mechanical Properties of PA6/ABS BlendsPreparation of Semisolid Feedstock by Reversed Cone Channel Pouring
