Binders, Materials and Technologies in Modern Construction IV

16th International Conference Silicate Binders (16th ICBM 2017)
Erscheinungsjahr 2018
ISBN: 978-3-0357-2348-9
Verlag: Trans Tech Publications

Sonstiges, Englisch, Band Volume 276, 304 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Reihe: Solid State Phenomena

The 16th International Conference Silicate Binders 2017 (ICBM 2017) was organized with the support from Brno University of Technology. The most important topics on the conference were chemistry and technology of cement and other hydraulic and silicate binders, chemistry and technology of lime production and gypsum based binders. Special attention was paid to the use and behaviour of these mentioned binders in the various kind of building materials, like concrete, inorganic insulations and in solidified sludges.

Autoren/Hrsg.

Dvor?k, Karel

Gazdic, Dominik

Hajkova, Iveta

Fachgebiete

• Technische Wissenschaften Bauingenieurwesen Baukonstruktion, Baufachmaterialien

Inhaltsverzeichnis

Hydraulic Binder from Hazardous WasteAlkali-Sulfate Activated Blended Portland CementsDifferences in Electrical Properties of Portland Cement and Alkali-Activated Slag MortarsThe Combined Effect of the Plasticizer and Multi-Walled Carbon Nanotubes on the Cement Hydration ProductsThe Influence of Concentrations of Cement Particles on Rheological Behavior and Thixotropy of Portland Cement PastePossibilities of Experimental Determinations of the Modulus of Elasticity in the early Stage of Ageing of Cement CompositesThe Estimated Effect of Carbon Nanomaterials Implementation on the Formation of Hydration ProductsEffect of the Milling Agents on Pozzolanic Activity of GlassEffect of Humidity on the Properties of Cement Mortars with a Crystalline AdditiveStudy of the Hydration Process of Synthetic Preparation of Ettringite by Direct Addition of Aluminum Sulfate and Calcium HydroxideInfluence of Cellulose Ethers on Fresh State Properties of Lime MortarsProperties of Aerial Lime-Based Mortars with Chitosan EthersThe Relation of Limestone Origin and its Reactivity to the Preparation of Desulphurization AgentsEffect of the Firing Process to the Lime CrystallinityThe Influence of Fine Particle Content (Cement Together with Sand Particles up to 0.25 mm) on Rheological Properties of Concrete Mixture?omplex Industrial Wastes Based Admixture for Improved Properties of Fine-Grained ConcreteThe Suitability of Fly Ash for Use in Concrete According to EN 450 Based on their Particle SizeEffect of Hardening Accelerators and other Chemical Admixtures on the Properties of a Quick-Setting MixtureDecorative Coating Based on Composite Cement-Silicate MatrixNonlinear Acoustic Spectroscopy Method for Nondestructive Testing of Thermally Damaged ConcreteInfluence of the Maximum Aggregate Grain Size on the Modulus of Elasticity and on the Parameters of the Acoustic Emission of Concrete Exposed to High TemperaturesHigh Strain Rate Compressive Behavior of Micro-Fibre Reinforced Fine Grained Cementitious CompositeEffect of Ammonium Ion Content in Fly Ash after Selective Non-Catalytic Reduction (SNCR) on Physical and Mechanical Properties of Autoclaved Aerated Concrete (AAC)Physical Properties of Selected Silicates for a Long-Term Heat ContainerSpecial Grout for Anchoring Steel Elements with High Proportion of Fly Ash Contaminated by Denitrification ProcessInfluence of Ammonia Content in SNCR Fly Ash on Phase Composition and Morphology of Autoclaved Aerated Concrete (AAC)Epoxy Resin Coatings Crystallization and Influence of Crystallinity on Shore Hardness and Tensile PropertiesPorous Systems Based on Alkali-Activated Fly AshRheological Properties of Alkali-Activated Brick Powder Based Pastes: Effect of Alkali Activator and Silicate ModulusNano-Structured Alkaline Aluminosilicate Binder by Carbonate Mineral AdditionModifying Stucco Mortars with Additions of Sulphoaluminate Cement and Aluminate CementThe Impact of Addition of Fibers on Reducing the Shrinkage Cracks in Multilayer Renovation PlastersShaping Mortar Parameters in Terms of their Tendency to Form Shrinkage CracksInfluence of Polymer Admixtures on the Rheological Properties and Heat of Hydration of Alkali Activated Slag PastesNanomodified Organic-Inorganic Polymeric Binders for Polymer Building MaterialsComparison of Automated Concrete Shrinkage Measurement MethodsModification of Technological Properties of Laboratory PremixesUse of Undersize Fractions of Refractory Claystone for Grog Manufacturing in Shaft KilnsDevelopment of New Advanced Plasters with Waste Fibers ContentTesting and Optimization of Production of Technical Foam for the Production of Cement FoamBehavior of High Strength Concrete at High TemperaturesThe Evaluation of the Effect of Crystallization Additives on Long Term Durability of Cement CompositesFibre Cement Board Characteristics in Relation to Bulk Density and the Way of TreatmentDevelopment of Light-Weight Concrete with Utilization of Foam Glass Based AggregateDurability Assessment of Cement Matrices for Neutralization Sludge Disposing

Über Autor(innen)

Eds. Karel Dvorák, Dominik Gazdic and Iveta Hajkova