Selected, peer reviewed papers from The 4th International Conference on Nanomaterials by Severe Plastic Deformation, Goslar, Germany, August 18-22, 2008
Buch, Englisch, 1200 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2400 g
ISBN: 978-0-87849-375-3
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface
I. Overview, Recent Advances and Commercialization Pathways
Factors Influencing the Development of Homogeneity in Disks Processed by High-Pressure Torsion
R&D of NanoSPD Materials in Ufa via International Cooperation
Advantages and Limitations of HPT: A Review
On Grain Boundary Engineering of UFG Metals and Alloys for Enhancing their Properties
Analysis of the Fundamental Mechanisms and Efficiency of the Deformation Methods of Nanostructuring
Features of Work Hardening of Polycrystals with Nanograins
Nanoglasses: A Way to Solid Materials with Tunable Atomic Structures and Properties
Nanostructured SPD Processed Titanium for Medical Implants
Outstanding Mechanical Properties in the Materials with a Nano / Meso Hybrid Microstructure
II. Processing
Evaluation of Reshaping Methods for Multi-Pass Equal Channel Angular Extrusion
UFG-Microstructures by Linear Flow Splitting
Angular Extrusion of Double-Metal Ingot
Long-Length Ultrafine-Grained Titanium Rods Produced by ECAP-Conform
Influence of Reversible Hydrogen Alloying on Nanostructure Formation in Titanium Alloys Subjected to Severe Plastic Deformation
High Strength Ti of Substantial Interstitial Contents Produced by Back Pressure Equal Channel Angular Consolidation of Dehydrided Particles
High Strength Bulk Nanostructured 2219 Al Alloy Produced by High Energy Ball Milling and Hot Pressing
Nanostructured Materials by Twist Extrusion and High Pressure Torsion
Incremental ECAP of Plates
Bulk Mg Produced by Back Pressure Equal Channel Angular Consolidation (BP- ECAC)
Bulk Ultrafine and Nanostructured Materials from Consolidation of Particles by Back Pressure Equal Channel Angular Pressing
Effect of Electroplastic Deformation on Martensitic Transformation in Coarse Grained and Ultrafine Grained Ni-Ti Shape Memory Alloy
Reversal Straining to Manage Structure in Pure Aluminum under SPD
Double-Billet Incremental ECAP
The Influence of ECAP Die Channel Geometry on Shear Strain and Deformation Uniformity
III. Enhanced Plasticity
Microstructure and Mechanical Properties of Nanostructured Intermetallic Alloy Based on Ti2AlNb
The Features of Deformation Behavior of Ultra-Fine Grained Titanium and Aluminum Alloys under Conditions of High Strain Rate Superplasticity
High Strain Rate Superplasticity in a Zr and Sc Modified 7075 Aluminum Alloy Produced by ECAP
Influence of Number of Passes in ECAP on Superplastic Behavior in a Magnesium Alloy
The New Approach to Produce Al Sheets with UFG Structure Using SPD Processing
Grain Refinement and Deformation Behavior of Ultrafine Grained Pd and Pd-Ag Alloys Produced by HPT
IV. Testing Techniques
Use of Ring Sample for High-Pressure Torsion and Microstructural Evolution with Equivalent Strain
Comparative Possibilities of Different X-Ray Methods by Study of SPD Metal Materials
Mechanical Behavior of Nanocrystalline Palladium at High Strains and High Strain Rates
Chemical Sensitive Positron-Annihilation Study of Amorphization and Nanocrystallization Processes by Repeated Roll Bonding
Microstructure and Indentation Size-Effect in Pure Niobium Subjected to SPD via ECAP and HPT
Strain Rate Sensitivity Studies of Cryomilled Al Alloy Performed by Nanoindentation
Severe Plastic Deformation of Amorphous Alloys
Temperature Field in Severe Plastic Deformation at Small Strain Rates
Optical Strain Measurement on Small Specimens Based on Laser Speckles
Bond Strength of Ultrafine Grained Zr Fabricated by Accumulative Roll Bonding
In Situ Tensile Testing of Ultra Fine Grained Pd and Pd-Ag Alloys
Applications of Differential Scanning Calorimetry on Materials Subjected by Severe Plastic Deformation
V. Characterization
Texture Evolution of Magnesium Single Crystals Deformed by High-Pressure Torsion
Structure of Triple Junctions of Grains, Nanoparticles in them and Bending - Torsion in Metal Nanopolycrystals
Workability Limits of Commercial Purity Titanium Subjected to Equal Channel Angular Pressing
Specific Features of Static, Impact, and Fatigue Fracture of the 0.09%C-0.08%Mo-0.03%Nb-0.06%V Steel with Ultrafine-Grained Structure
Compressive Behavior of Ultrafine-Grained Mg-Zn-Y-Zr Alloy Containing Quasicrystalline Phase
Shear Induced Low- and High-Angle Boundary Characterization Using Kikuchi Bands in Transmission Electron Microscopy
Microstructure Evolution during High Pressure Torsion of AZ80 Magnesium Alloy
Microstructure of a Metal-Polymer Composite Processed by Severe Plastic Deformation
Influence of SPD by ECAP on Cu Properties
Enhanced Strength and Ductility in Hypo-Eutectoid Cu-Al Alloys through ECAP and Annealing
Characterizing the Shear Deformation during Asymmetric Rolling
Microstructural Characterizations of Cu Processed by ECAP from 4 to 24 Passes
Features of the Structure Development and the Deformation Process in Zr-Based Alloys under Radial Forging
Study of Texture Evolution of Pure Magnesium during ECAE Using EBSD
UFG Microstructure Processing by ECAP from Double Electron-Beam Melted Rare Metal
Lattice Defects in Hydrogenated and HPT Processed Pd
Metals Microstructure Improving under Hard Cyclic Viscoplastic Deformation
Observations of Texture in Large Scale HPT-Processed Cu
Effect of Texture and Microstructure on Ductility of a Mg-Al-Ca Alloy Processed by Equal Channel Angular Pressing
Grain Boundary Radiotracer Diffusion of Ni in Ultra-Fine Grained Cu and Cu - 1wt.% Pb Alloy Produced by Equal Channel Angular Pressing
Influence of a Slip Plane Orientation with Respect to the Shear Plane of ECAP on Microstructure of Copper Single Crystal Subject to One Pressing at Room Temperature
Grain Refinement of Pure Copper by ECAP
Activation Volume in Fine Grained Metals from Stress Relaxation and Nano-Indentation
Ultimate Strength of a Tungsten Heavy Alloy after Severe Plastic Deformation at Quasi-Static and Dynamic Loading
TEM Studies on the Effect of Nature of Precipitates in Al-Li Alloy on Microstructural Evolution during Severe Plastic Deformation
Strengthening of Nickel Deformed by High Pressure Torsion
TEM Study of Local Disordering: A Structural Phase Change Induced by High-Pressure Torsion
Bulk Al Materials from Back Pressure Equal Channel Angular Consolidation of Mechanically Milled Particles
3D Tomographic EBSD Measurements of Heavily Deformed Ultra Fine Grained Cu-0.17wt%Zr Obtained from ECAP
Mechanical Properties and Microstructure Development of Ultrafine-Grained Cu Processed by ECAP
The Evolution of Homogeneity during Processing of Commercial Purity Aluminium by ECAP
Strength and Plasticity of Ultra-Fine Grained Zirconium at Low Temperatures
Influence of Severe Thermomechanical Treatment on Formation of Nanocrystalline Structure in Ni 718 and Ni 718Plus Alloys and their Mechanical Properties
In Situ TEM Observations of Deformation Processes in Nanocrystalline Pd
Mechanical Behavior and Stress-Induced Martensitic Transformation in Nanocrystalline Ti49.4Ni50.6 Alloy
Effect of Nanocrystalline Structure and Polygonized Dislocation Substructure on Ti-Ni Martensite Lattice Parameters and Transformation Lattice Strain
Effect of Processing Temperature on Microstructure Development during ECAP of Al-Mg-Sc Alloy
Effects of Equal-Channel Angular Pressing on the Anisotropy of Ultrafine Copper and Titanium
Strain Gradient Hardening and Pressure Induced Phase Transformation of Metals by HPT
Effect of Pre-Aging on the Microstructure and Strength of Supersaturated AlZnMg Alloys Processed by ECAP
Nanostructured Shape Memory TiNi Alloy Processed by Severe Electroplastic Deformation
Texture Gradient in a Single Pass ECAPed Pure Mg by Neutron Radiation
Life Time Predictions through X-Ray Defect Analysis of MEMS Devices
Effect of the Second Phase on the Microstructure of Magnesium Alloys during Cyclic Extrusion Compression
Grain Boundary Structure and Deformation Defects in Nanostructured Al–Mg Alloys Processed by High Pressure Torsion
Microstructure and Properties of Aluminium Processed by Constrained Groove Pressing
Particle Redistribution and Grain Refinement during Processing by Hydrostatic Extrusion
Microstructure and Mechanical Properties of Al-0.5 at.% X (=Si, Ag, Mg) Alloys Highly Deformed by ARB Process
High Pressure Torsion of Intermetallic Zr3Al
Structure and Properties of Mg-Al-Ca Alloy after Severe Plastic Deformation
Microstructure and Texture of Mg-Based AZ Alloys after Heavy Deformation under Cyclic Strain Path Change Conditions
Twinning, Dislocations and Grain Size in NanoSPD Materials Determined by X-Ray Diffraction
Microstructure and Mechanical Properties of Commercial Purity HIPed and Crushed Aluminum
Texture and Grain Boundary Character Distribution during Equal Channel Angular Extrusion of some Two-Phase Copper Alloys
Microstructure Development and Precipitation Effects in Ultra Fine Grained Mg-3Tb-2Nd Alloy Prepared by High Pressure Torsion
Tensile Property of Submicrocrystalline Pure Fe Produced by HPT-Straining
VI. Steels and Light Alloys
Effect of Grain Refinement on the Mechanical Behaviour of Ferritic Steels: Evolution of Isotropic Hardening and Kinematic Hardening
Evolution of Texture in Ultra-Fine Grained Ferrite through Warm-Rolling and Intercritical Annealing
Study of the Plastic Deformation in Nanocrystalline and Ultrafine Iron and Carbon Steels
Ultrafine Grained Low Carbon Steels Processed by Severe Plastic Deformation
Microstructure Evolution during Continuous Frictional Angular Extrusion of Interstitial-Free Steel
Fracture Toughness Enhanced by Severe Plastic Deformation in Low Carbon Steel
Regularities of Deformation and Fracture of Steels Subjected to Equal Channel Angular Pressing and Thermal Processing
Microstructural Characterization of Low-Carbon Steel Processed by High Pressure Torsion and Annealing
Severe Plastic Deformation of a Bainitic Rail Steel
Properties of UFG HSLA Steel Profiles Produced by Linear Flow Splitting
Severe Deformation of a Carbon Steel within the Ferritic Region
Strain Rate Sensitivity of 31Mn-3Al-3Si TWIP Steel with Partially Recrystallized Fine Grained Structure
Shear Deformation and Texture Evolution in Al Alloys Processed for One Pass by ECAP
Combining Equal-Channel Angular Extrusion (ECAE) and Heat Treatment for Achieving High Strength and Moderate Ductility in an Al-Cu Alloy
The Effect of Strain on the Development of Ultra-Fine Grain Structure in 7055 Aluminium Alloy Processed by Equal Channel Angular Extrusion
Investigations on Deformation Behavior and Microstructure of Ultrafine Grained Two Phase Al-Mn Alloy Fabricated by Confined Channel Die Pressing
Deformation Behaviour of an Ultra-Fine Grained Al6082 Alloy
Precipitation Studies of Undeformed and ECAP-Deformed Al-4%Cu Alloys: Effects on Microstructure and Tensile Properties
Grain Boundary Structures of ARB Processed Aluminum
Grain Refinement in a Commercial Al-Mg-Sc-Zr Alloy during Hot ECAP
Microstructure and Aging Behavior of Al-0.2wt%Zr Alloy Heavily Deformed by ARB Process
A Comparative Study on Mechanical Properties of Al 7075 Alloy Processed by Rolling at Cryogenic Temperature and Room Temperature
Strain Rate Sensitivity of Ultrafine Grained Aluminium Alloy AA6061
Development of Extrusion and Rolling Textures during ECAP of Mg-Alloys
Study of a Fine-Grained AZ31 Magnesium Alloy Prepared by Equal Channel Angular Pressing
Production of Nanostructure in Titanium by Cold Rolling
Crystallographic Texture Development in CP Ti Subjected to ECAP
Mechanical Behaviour and Microstructure Evolution of Severely Deformed Two-Phase Titanium Alloys
Nanocrystalline Titanium Rods Processed by Hydrostatic Extrusion
Mechanical Properties of Ti–6Al–4V Titanium Alloy with Submicrocrystalline Structure Produced by Multiaxial Forging
VII. Creep, Fatigue and Damage Mechanisms
Structure and Mechanical Properties of Severely Deformed Cu-Cr-Zr Alloys Produced by Accumulative Roll-Bonding Process
On the Effect of Deformation Mode on Fatigue: Simple Shear vs. Pure Shear
Structure and Fatigue Properties of the Mg Alloy AM60 Processed by ECAP
Effect of Trace Impurities on High-Cycle Fatigue Damage of Ultrafine Grained Copper Processed by Equal Channel Angular Pressing
Microstructure and Mechanical Properties Affecting Crack Growth Behaviour in AA6060 Produced by Equal-Channel Angular Extrusion
Fatigue-Crack-Growth Behavior of Ultrafine-Grained Al-Mg-Sc Alloy Produced by ECAP
Cycling of Ultrafine-Grained Ti-6Al-4V ELI Alloy: Microstructural Changes and Enhanced Fatigue Limit
Deformation Behaviour of Accumulative Roll Bonded and Friction Stir Welded Aluminium Alloys
Cyclic Deformation Behaviour and Fatigue Lives of Ultrafine-Grained Aluminium-Magnesium Alloys
Microstructural Evolution and Creep of an Al-0.2wt.%Sc Alloy after Equal-Channel Angular Pressing
Martensitic Transformations and Functional Stability in Ultra-Fine Grained NiTi Shape Memory Alloys
Influence of Post-ECAP TMT on Mechanical Properties of the Wrought Magnesium Alloy AZ80
The Effect of Texture on the Fatigue Properties of Ultrafine-Grained Interstitial-Free Steel
Study of Deformation and Fracture of Submicrocrystalline Aluminum Alloys by Acoustic Emission Method
Microstructural Stability and Creep in Nanocrystals
VIII. Thermal Stability and Other Physical Properties
Susceptibility to Stress Corrosion Cracking in Ammonia of Nanostructured Cu-10wt%Zn Alloy Produced by Severe Plastic Deformation
Thermal Stability of Severe Plastically Deformed VT-6 (Ti-6Al-4V)
Annealing Response of Al-0.22Sc-0.13Zr Alloy Processed by Accumulative Roll Bonding
Thermal Stability of Ultrafine Grains in Al-Fe-Mn-Si Foils Prepared by ARB and Subsequent Rolling
Effect of Cryorolling Strain on Precipitation Kinetics of Al 7075 Alloy
Characteristic Features and Thermal Stability of Molybdenum Processed by Different Ways of Severe Plastic Deformation
Tailoring the Magnetic Properties of Ferritic Alloys by HPT
Continuous Recrystallization Phenomenon in High Purity Copper during Equal Channel Angular Pressing up to High Strain at Room Temperature
Athermal and Thermal Limits of the Grain Refinement by SPD
Annealing Behavior of ECAP Deformed Aluminum Alloy 3103
Magnetic Parameters of R2Fe14B Compounds with Nanograin Structure
Martensitic Transformation in Fe-Ni Alloys Nanostructured by Ball Milling
Thermal Stability of Mechanical Properties of Copper after Equal-Channel Angular Pressing
Recrystallization in Nanostructured Austenitic Stainless Steel
Effects of Processing Routes on Wear Property of Al-Al3Ti Alloys Severely Deformed by ECAP
How Fe60Co40 and Fe72Al28 Nano-Alloys Produced by Mechanical Alloying Behave when Exposed to Microwaves
Structure and Functional Properties of Ti-Ni-Based Shape Memory Alloy after Electroplastic Deformation
Corrosion Characteristics of an Ultrafine-Grained Al-Mg-Si Alloy (AA6082)
Microstructure and Corrosion Properties of Fine-Grained Mg-Based Alloys
Influence of HPT Deformation Temperature on Microstructures and Thermal Stability of Ultrafine-Grained Tungsten
Control of Crystallographic Orientation and Grain Refinement in Bi2Te3-Based Thermoelectric Semiconductors by Applying High Pressure Torsion
Diffusion in Ultrafine Grained Materials
IX. Modelling
Finite Element Investigation of the Effect of Hardening Behavior of Alloys on Equal Channel Angular Pressing Performance
A Triple-Scale Crystal Plasticity Simulation on Yield Behavior of Annealed FCC Fine-Grained Metals
Formation of Multiply-Twinned Particles during Two-Nanoparticles Agglomeration: The Results of MD Simulation
Long-Term Microhardness Evolution in Ti-Ni Shape Memory Alloys Processed by Severe Cold Rolling
A Phase-Field Simulation of Nucleation from Subgrain and Grain Growth in Static Recrystallization
Application of Strain Gradient Plasticity Modelling to High Pressure Torsion
Multiscale Crystal Plasticity Simulation with Pseudo-Three-Dimensional Model on Ultrafine-Graining Based on Evolution of Dislocation Structures
Numerical Modeling of Dislocation-Grain Boundary Interaction and Continuum Mechanics Analyses for Mechanical Properties of Fine Grained Metals
Multiscale Modeling of SPD Processes for Grain Refinement
Computer Simulation of Kinematics of Plastic Flow and the Deformed Condition of Metal at Processes Equal-Channel Angular Pressing