Selected, peer reviewed papers from the 5th International Conference on Manufacturing Science and Engineering (ICMSE 2014), April 19-20, 2014, Shanghai, China
Buch, Englisch, 2870 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 4600 g
ISBN: 978-3-03835-121-4
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Conference Organization
Chapter 1: Alloys and Non-Ferrous Materials
Influence of Overburning on Microstructure and Property of 2024 Aluminum Alloy
Effects of Nb Element on Mircostructure, Thermal Conductivity and Melting Point of Cu-Ni-Nb Alloy Prepared by Vacuum Arc-Melting
Dissolution of Alumina in Molten Aluminum Electrolyte Based on Perforated Anode
Surface Characterization and Machinability of Zirconium Alloys in View of Jewelry Application
Hot Deformation Behavior and Microstructural Evolution of Al-Zn-Mg-Cu Alloy with Different Starting Structures
Discussion on Technologies of Preparation of Foam Aluminum Metallic Material by Infiltration Casting Method
Effect of Indium on Precipitation Kinetics of an Al8Si0.4Mg Cast Alloy
Influence of MgO on Calcium Aluminate Slag System with Lower Calcium
Processing Map of Mg-13Al-3Ca-3Zn-1Nd-0.2Mn Magnesium Alloy
Structure and Dynamical Relaxation in Undercooled Liquid of Cu50Co50 with Miscible Gap
The Effect of Mixed RE Elements on Microstructure and Mechanical Properties of Die-Cast AZ91D Alloy
Use of Strain Energy Density W and Qo as Quality Indices to Study the Effect of Hipping on Cast Aluminium Alloy 354 under Different Aging Conditions
Strain Rate Sensitivity and Adiabatic Shear Deformation of an Advanced Al-Mg Alloy
Comparison of Mechanical Properties of 357-T6 Aluminum Alloy Aast under Gravity Permanent Casting and Low Pressure Die Casting
Diffusion Bonding of Commercially Pure Titanium to Q235B Using Copper as Interlayer
Mechanical Properties of A356 Aluminum Cast Alloy Shaped by Permanent Mold Casting
Superplasticity Mg Alloy Fabricated by Friction Stir Processing
The Technique Study on Silicon Brass Recrystallization Annealing Aided by Electric Pulse Treatment
Wettability, Surface Tension and Work of Adhesion of Cu-Ti Alloys on Yttria Partially-Stabilized Zirconia at 1273K
Combustion Synthesis Sintering of Ni-Al Powder Alloys
Influence of High Magnetic Field on ß-a Phase Transformation in TC4 Titanium Alloy
Low Temperature Superplasticity of 5083 Aluminum Alloy
Prediction of TCP Phases in Nickel-Base Superalloys
Chapter 2: Iron and Steel
Bake Hardening Properties of Ultra-Rapid Annealed Ultra-Low Carbon Bake Hardening Steel
Study on Internal Quality of Billets for 20CrMnTiH Steel
Study on Microstructure and Properties of X80 Pipeline Steel
Study on Microstructure and Property in Heat-Affected Zone of X80 Pipeline Steel
Thermal Simulation Study of CGHAZ Austenite Grain Growth Behavior of X80 Pipeline Steel
Research on Mechanics Performance of TP304H Austenitic Stainless Steel in the Process of Aging at High Temperature
Experimental Study on Hydrogen Selective-Reduction of Niobium Containing Iron Ore Powder
Research on the Corrosive Factors of Q235 Steel in Simulate Ammonium Sulfate Solution of Ammonia Desulphurization
Microstructure and Mechanical Property Analyses of Brazing Titanium and Low Carbon Steel Using Silver-Based Brazing Alloy
Research and Application of Basic Tundish Covering Flux
Research of Producing Reduction Steel Powder from GCr15 Steel Scrap
The Research Status of Titanium Clad Steel
Oxidation Behavior of T91 Steel in Water Vapor Atmosphere at 750°C
Research on the Size Distribution of Intragranular and Boundary Carbides of T91 Steel after Creep
Analysis on Alloying Elements of Selective Oxidation of TRIP Steel
High Temperature Oxidation Behavior of SUS310S Austenitic Stainless Steel
Preparation and Characterization of Iron-Oxide-Coated-Zeolite Adsorbent
Experimental Study on Refractory Weathering Steel Cold-Rolled Sheets Recrystallization Annealing
Analysis of Boride Phase Composition in High Boron Alloyed Stainless Steel Containing Titanium
Chapter 3: Composites
Synthesis of Sulfur-Doped Graphene from Sulfonated Polystyrene
The Properties of the Sodium Silicate Binder Composition Based on Quartzite Deposits
Study on Microstructure of Continuous Cf/Al Composite Material Prepared by Hot Pressing Diffusion Method
Change Regulation of Hardness of Target around Crater Penetrated by Wf/Zr-Based Amorphous Matrix Composite Projectile
Adsorption of Cu(II) from Aqueous Solution onto Na-Bentonite/Poly AMPS/AA/AM Composite
Effects of Fillers on the Dynamic Properties of a High Performance Elastomer at Varying Strain Amplitude
Morphology, Thermal, Dynamic Mechanical and Mechanical Properties of Long Glass Fiber Reinforced Thermoplastic Polyurethane Elastomers and Polyvinyl Chloride Composites
Investigation of Surface Roughness after Turning of One Kind of the Bio-Material with Thermoplastic Matrix and Natural Fibers
Microstructure and Tribological Properties of Cu-Fe Based Braking Materials
Preparation and Wear Performance of Novel Graphite/Copper Alloy-Matrix Self-Lubricating Composite Materials
The Fabrication of High Silicon-Aluminum Composites and the Thermal Conductivity
Study on Properties of Modified Porous Starch/ Natural Rubber Composite
The Influence of SiO2 on Properties of Cellulose Aerogel
Design, Fabrication and Characterization of Fused Silica-Based Composites with an LTCC-Derived FSS
Effect of Cycle Index on the Microstructural Evolution of Alumina Particles Reinforced Aluminum Composites Treated by Cryogenic Treatment
Influence of Cooling Speed on the Microstructure of Particles Reinforced 7055Al Composites Subject to Regulatory Cryogenic Treatment
Preparation and Characterization of Resin-Derived Carbon Foams Containing Hollow Microspheres
A Study of Polyurethane Rubber Composite Modified Asphalt Mixture
Fluorescence Properties of Electrospun Bio-Based Polyamide/Eu(TTA)3phen Composite Fibers
Preparation of Poly(m-toluidine)/Montmorillonite Composites and its Thermal Stability
Effect of Diffusion Annealing on Defects Reduction of 6.5wt% High Silicon Steel Composite Plate after Hot Deformation
Investigation of Heat Treatment’s Influence on the Preparation of High Silicon Steel Composite Sheet
Iron Loss Measurement on 6.5wt%Si Composite Plate Prepared by Clad Casting and Conventional Rolling Processes
Production of 6.5wt%Si Composite Thin Sheet by Cold Rolling Process
Study on Heating Treatment of 45steel/60Si2CrA Multi-Layer Composite Armor Plate
Study on Mechanical Property of 1Cr17/9Cr18MoV Multilayer Composite Armor Plate
Study on Superabsorbent Material in Thermal Infrared Camouflage
Chapter 4: Micro/Nano Materials and Technologies
A Hydrogen Peroxide Electrochemical Sensor Based on Co-Doped Fe3O4 Nanoparticles
Effect of Collect Distance on the Fabrication of Aligned Nanofiber by Parallel Electrode
Research Profiling of Carbon Nanotubes from 2000 to 2013
The Raman Properties of Ag Doped ZnO Microrods Synthesized by Chemical Vapour Deposition
Large-Scale Synthesis of Water-Dissoluble Nanorods
Fabrication of PLA Nanoporous Fibers by DMF/CF Mixed Solvent via Electrospinning
Fabrication of PEG Hydrogel and PDMS Microstructures by a Simple UV Curing Process for Nanobio-Chip Applications
Performance of Electrospun Nanofibres on Adsorbing Gaseous Aromatic Compounds
Properties of Metallic Materials after Surface Self Nano-Crystallization
Simulation of Electric Field for Carbon Nanotube Assembly by Dielectrophoresis
The Influence of Zn/Zr Ratios on CuO-ZnO-ZrO2 Catalysts for Methanol Synthesis from CO2 Hydrogenation
Modification of the Fine - Aggregate Concrete by High Disperse Silica Fume and Carbon Nanoparticles Containing Modifiers
Preparation and Mechanics Properties of the EP/TiO2 Nanocomposites
Progress of Studies on Fabrication of TiO2 Nanotube Arrays on Ti or Ti Alloys by Anodization
Study on Preparation and Property of Regenerated Liquid Reactive Dyes Regenerated Magenta
The Effect of Different Ratio in Carbon Aerogel on Pore Structure in Ambient Dry
Influence of Softener on Rheological Characteristics of the Nanostructured Modifier
Insertion versus Growth of Magnetic Nanoparticles in MgB2 Superconducting Composites
High Density Dislocation and Magnetoplasticity in Nano-Sized Alumina Reinforced 7055Al Composites Subject to High Magnetic Field
Effect of Carbon Nanotubes on Microstructure of Multiphase Composite Al2O3 Ceramics
Quasicontinuum Analysis of Dislocation Propagation during Nanocontact
Prepare and Formaldehyde Sensing Properties of Hollow Nanofibers In2O3
Polarization Dependent Nonlinear Absorption in Au Nanowire Array
Research on Surface Modification of Nano-TiO2
Enhanced Mechanical Performance of Electrospun Graphene/Polyacrylonitrile (PAN) Composite Microfibrous Yarns via Post-Processing
Influence of Complexing Agent on the Structure and Properties of Electrodeposited Fe–Co Alloy Nanowires
Chapter 5: Ceramics
Dispersion Stability of Hydroxyapatite-Calcium Phosphate Glass Ceramic-Tertiary Butyl Alcohol System
Microwave Dielectric Properties of Low-Fired Nd2Ti2SiO9 Ceramics with BaCu (B2O5) Addition
Effects of Cr2O3 Addition on Mechanical and Electrical Properties of Alumina Ceramic
Effect of Copper Micro-Scale Excess on the Dielectric Properties of CaCu3Ti4O12 Ceramics Prepared via Tape Casting
Effect of H3BO3 Additive and Forming Pressure on Microwave Dielectric Properties of 0.95MgTiO3-0.05CaTiO3
Sintering Behavior of Lead Oxide Ceramic Prepared by Microwave Sintering
Research and Transformation of Rotary Surface Discharge Machining Equipment of Engineering Ceramic
Effect of Tb4O7 Doping on Wear Resistance of High-Alumina Ceramic
Low-Temperature-Tunnel of High-Alumina Ceramics with Good Wear Resistance
Preparation of the System of MgO-CaO-SiO2-Al2O3-Y2O3Wear-Resistant Alumina Ceramics
Study of Nonlinear Current-Voltage Characteristic of Semiconductor Ceramic by the Method of Tilted Energy Band
The Ways to the Main Problems in the Application of Low Temperature Co-Fired Ceramics Technology (LTCC)
Study on the Crystal Bonding Mechanism of Al2O3–ZrO2 Ceramic Composite
Effect of Calcite Content on Firing Characteristics and its Sintering Properties of Nixing Pottery
Analysis of Pop-In Phenomenon in the Process of Ceramic Materials Instrumented Indentation
Chapter 6: Optical/Electronic/Magnetic Materials and Technologies
A Life Prediction Model for LEDs Lamps Based on the Thermal Life Theory
Characteristics Research of Gallium Arsenide Solar Cells under Femtosecond Laser Illumination
Research on the Mechanism and Model of Contact Resistance
Test Systems for Life of LED Light Based on Junction Temperature
The Modification of Anatase TiO2 (001) Surface by N or S Atom: A DFT Investigation
Effect of Temperature on LiMn2O4 Prepared by Molten-Salt Combustion Synthesis
Electrochemical Title Performance of LiMn2O4 Synthesized by Flameless Solution Combustion with Acetate System
Carrier Injection in High Gain GaAs Photoconductive Semiconductor Switches
Modeling of the Stress-Dependent Hysteretic Dynamics of Ferroelectric Materials
Synthesis, Characterization and Photophysical Properties of a New CuI Complexe Contain Bis[2-(diphenylphosphino)phenyl] ether and 7,10-Dimethyl Pyrazino [2,3-f][1,10]phenanthroline
Research on Bonded NdFeB Arc-Magnets
Electron Avalanche Domains in High Gain Semi-Insulating GaAs Photoconductive Semiconductor Switches
Manufacture Technology for Large Lightweight Optical Materials
A PbS/ITO/Glass Based Photoelectrochemical Cell with a Sponge-Like Surface Structure
Photoionization in GaAs Photoconductive Semiconductor Switches
Research and Implementation on Methods of Evaluating Lifetime of LED Light Source for LED Lighting System
Synthesis of a Novel Donor Unit for Organic Light-Emitting Materials: 10-octyl-3,7-Di(thiophen-2-yl)-10H-phenothiazine
Chapter 6: Optical/Electronic/Magnetic Materials and Technologies
The Luminescence Properties of Ca3(BO3)2 Doped with Ce3+, Tb3+
Technological Development of 6.5wt%Si Electrical Steel Production
Influence of Nd-Doping on Electronic Structure and Optical Properties of ZnO
Optical Properties of 5,5'-(9,9-dioctyl-9H-fluorene-2,7-diyl)Bis(thiophene-2-carbal dehyde): A Novel Organic Light Emitting Material
Fabrication and Lead Ion Removal Property of Magnetic Hydroxyapatite Composite with Hierarchically Urchin-like Microstructure
Study on Microwave Absorbing of Tourmaline and Dravite/ZnO Complex Powders
Modelisation of Permeability as a Function of Induction and Temperature by the Brillouin’s Function for the Formalization of the Magnetothermal Problem
Chapter 7: Building and Construction Research
Comparison Study on Road Performance of Modified Asphalt Mixture for Intermediate Course
Establishment and Research on the Rebound Curve to Detect Pump Concrete Compression Strength with Resiliometer
Finite Element Analysis of Dynamic Splitting Tensile Mechanical Properties of Reinforced Concrete
Flush Rule and Initial Flush Analysis of Cement Concrete Pavement
Mechanism Analysis on Concrete Column’s Recovery Strengthening
Study of Bond Behavior between Concrete and Steel Bars Based on New Beam Specimens
Study of Model Tests on Large-Span Tunnel’s Damage Caused by Overload with Arch Cover Method
Study on Moment-Curvature Hysteretic Model of Steel-Concrete Composite Box Beam
Resistance of Polymer Dispersion Additive Modified Concrete to Light Liquids Action
Analysis on Bearing Capacity of Retaining Wall with Anchor
Experimental Study on the Mechanical Properties of the Crumb Rubber Concrete Modified by Latex
The Introduction of Micro-Pile in Building Heightening and Transformation
A Study on the Snowdrift Patterns of Gable and Flat Roofs Using a Wind Tunnel
Effect of Co-Doped Steelmaking Slag and Fly Ash on Performance of Permeable Concrete
Experimental Research on Shear of Interface between New and Old Concrete with Bond-In Reinforcement and Practical Calculation
Experimental Study on Ratio of Bending-Compressive Strength of the Crumb Rubber Concrete Modified by Latex
Nonlinear Analysis of Concrete-Filled Steel Tubular Columns under Blast Loading
Study on the Ultimate Bearing Capacity of Concrete Filled Steel Square Tubular Short Column with PBL
A Study on Influence of Shape of Aggregate on Strength and Quality of Concrete for Buildings and Pavements
Influence of Superplasticizer S-3 on the Technological Properties of Concrete Mixtures
Tests Results Strength and Thermophysical Properties of Aerated Concrete Block Wall Samples with the Use of Polyurethane Adhesive
Applicability Study of Peck Formula Applied to Shield Tunneling in the Loess Area
Bearing Performance Test Research of Shallow Arch Circular Concrete Filled Steel Tube Support
Current Status and Development Trend of Assembled Structure in Cold Regions
The Energy Efficiency of Residential Buildings with Light Walling
Highly Filled Building Materials Reduced Flammability
Modern Building Materials and the Concept of "Sustainability Project"
Research on the Influence of Fiber Web to the Axial Compression Performance of EPS Composite Insulation Wallboard
Restrained Shrinkage Behavior of Concrete under Different Environmental Conditions
Risk Evaluation of the Subway Foundation Pit Based on Variable-Weight and Matter-Element Theory
The Implementation of Waste Sawdust in Concrete
Electrochemical Behaviors of Q420 Hot Galvanized Plate in Simulated Concrete Pore Solution
Modernization of Residential Buildings of the 1960s
Shear Strengthening Effects of RC Beams Using Aramid Plate Strip
The Quickly Erected Buildings in Modern Construction
Compound and Engineering Application of Fiber Reinforced Concrete with Low Shrinkage
The Research of Concrete Short Columns Strengthed with Angle Steel
Microstructure and Mechanical Properties of Laminated Mg-Based Composites
The Engineering Application of Carbon Fiber Reinforced Concrete Beam
Modeling of Reliability for Anti-Condensation Wall System in Underground Engineering Based on Markov Process
The "Comfort in all Respects" Principle Implementation by the Example of an Elementary School
Character and Development Analysis of Foam Concrete Cooperating Rice Husk Ash
The Energy-Efficient Heat Insulation Thickness for Systems of Hinged Ventilated Facades
Shield Tunneling Parameters Optimization Based on Dynamic Bayesian Networks
The Historical Characteristics and New Developments of Settling Spaces on Bridges
Chapter 8: Environment-Friendly Materials
Effect of Formamide on the Mechanical Properties of Thermoplastic Protein Films
Mechanistic Study on Adsorption and Oxidation of NO over Activated Carbon
Study on Metal Chelation Adsorption of NO Using Fe(II)EDTA Solution in Power Plant
Impact of Biochar on Water Holding Capacity of Two Chinese Agricultural Soil
Application Research of Slow-Release Fertilizer in Plant Camouflage
Study on CO2 Adsorption of Sepiolite Modified by Silane Coupling
The Full Immersion Test Research of Refractory Weathering Steel
Hydraulic Performance of Olive Stone Filtration Systems
Organobentonites for Controlled Release of Diazinon
Study on the Storage Stability of High Neutralization Degree Phosphate-Bonded No-Bake Sand
Chapter 9: Biomaterials and Bioresearch
A Comparison Study of the Effects of Ultrasonication on the Gelation Behavior between the Silk Fibroin of Domestic and Wild Silkworms
Determination of Luteolin by Fluorescence Spectrometry
Dynamic Models of Cell Growth and its ß-Carotene Synthesis from the Red Yeast Mutant
Extraction Technology and Determination of Total Flavonoid in Magnolia Liliiflora Petals
Fractal Modeling Research in Permeability of Camellia and Bancoul Nut Cakes under Cold-Press
Improving the Yields of Carotene from Red Yeast by Using Ultra High Pressure and its Mutagenic Mechanism
Synthesis of Tung Oil Monoglyceride
Analysis of Key Odor Compounds in Steamed Chinese Mitten Crab (Eriocheir sinensis)
Chemical Constituents Study of Weixian Turnip (Raphanus sativus L.)
Comparison of Volatile Compounds in Raw and Cooked Chinese Mitten Crab Hepatopancreas and Gonads
Effect of Cold-Induced on Quality of Black Carp Fillet Stored at Controlled Freezing-Point
Microstructure Analysis of Xanthoceras Sorbifolia Shell Activated Carbon
Optimization of Microwave Pretreatment without a Reagent of Pineapple Peel
Optimizing Clarification of Pineapple Peel
Preparation and Evaluation of Calcium Alginate/Glycyrrhizic Acid Hydrogel
Preparation of Antioxidant Hydrolysates from Round Scad (Decapterus maruadsi) Protein by Composite Enzymatic Hydrolysis
Purification of Enzymatically Produced Trehalose by Saccharomyces cerevisiae Strains Carrying Compound UV- and NTG-Induced Mutations
The Establish of Four Kinds of Chinese Primary Economic Crab Species Fatty Acid Fingerprints
Effects of Water Temperature on Biochemical Characteristics of Mandarin Fish during Live Transportation
The Effect of Modified Atmosphere Packaging on the Quality of Sturgeon Caviar at 0°C
Characteristic Changes of Protein Occurring in Brine Salting Sturgeon at Different Levels of NaCl
Comparative Analysis of Amino Acid Composition in Antarctic Krill and White Shrimp
Component Analysis, Quality Measurement and Antioxidant Activity of Sambucus williamsii Seed Oil
Dicamba Degradation Using O3/UV Process in Aqueous Solution
Physicochemical and Rheological Properties of Gelatin Extracted from Tilapia (Oreochromis niloticus) Skin and Concentration Effect
Physicochemical Properties of Biodegradable Tilapia Skin Gelatin Film and Gelatin-Polysaccharide Based Composite Films
Plant MicroRNAs Responsive to Fungal Infection
Shortening Fermentation Period of Fermented Sausage by Adding Exogenous Enzymes
Study on Defluorination Effect of Antarctic Krill by Chemical Treatments
The Expression Analysis of WUSCHEL Gene under High and Low Temperature in Tomato Seedling
The Expression Analysis of the YABBY Transcript Factor-SlYABBY2a in the Tomato Seedling under Low Light
Towards Enhanced Bioactivity: Calcium Ion-Doped Polypyrrole
Vacuum Assisted Extraction of Indirubin from Radix isatidis through Orthogonal Test Method
A Bioaerosol Detection IRLidar
Effects of Different Purification Methods on Chicken Feather Keratin
Effect of Different Temperatures on Storage Quality of Fresh-Cut Apples
Finite Element Analysis of Femoral Fracture System
Influence of Operating Parameters on Physicochemical Properties of Fruit Juice Powders Produced by Spray Drying
Chapter 10: Polymer Materials
A Novel Cement Fluid Loss Additive P1402
A Self-Oscillating Polymer Chain with High LCST
Activation Energy of Autonomous Polymer Chains with High LCST
Preparation and Drug Release Behavior of IPN Hydrogel of Polyethylene Glycol and Octane Succinyl Chitosan
The Optimization Plastic Coefficient in AWC Research and Application
Effect of Relative Humidity on the Morphology of Electrospun Gelatin Aqueous Solutions
Melting, Crystallization Behaviors and Mechanical Properties of iPP Nucleated by ß Nucleation Masterbatches
Rheological Properties of all Para-Position Polysulfonamide Spinning Solutions
Simulation of the Flow-Induced Crystallization of Polypropylene Based on Molecular Kinetic Model
Study on Resin Infusion Behavior of the CFRP Integrated Manufacturing Process Based on RFI Process
A Novel Synthesis Process of PPTA by Nitrogen Cooling for Reaction Heat Removal
Crystallization Behavior and Crystal Morphology of PP/POEg Blends
The Kinematic Research in the Manufacture of Rigid Polyurethane Rubber Micro-V Grooves
Influence of Solvent Content on Properties of UHMWPA6 Fibers Prepared by Gel-Spinning Method
Chapter 11: Film Materials
Fabrication of Self-Organized Porous Anodic Alumina Film in Malonic Acid
Effects of Thickness on Resistance Switching Properties of ZnMn2O4 Films Deposited by Magnetron Sputtering
Investigation of Phase Transformation and Optical Properties of TiO2 Thin Films Deposited by Electron Beam Evaporation
Reaction Mechanism of Atomic Layer Deposition of Al on the Si (100) Surface: A Density Functional Theory Study
Effect of Al-Induced Crystallization on Structure of CdZnTe Thin Films Deposited by Radio Frequency Magnetron Sputtering
Influence of Sputtering Power on the Properties of CdS Thin Films Deposited by Magnetron Sputtering
Recent Progress in Gasochromics of Nano-Structured WO3 Film and its Applications
Structural and Optical Properties of (Al, Co) Codoped-ZnO Thin Film
Study of the Capacitive Properties of Strontium Barium Niobate Deposited by Radio Frequency Magnetron Sputtering
Chapter 12: Textile Materials and Technologies
Eco-Friendly Dyeing of Silk Fabric with Sodium Copper Chlorophyll
Fabrication of Twisted Continuous Nanofiber/Cotton Hybrid Yarns
The Exploration of Nickel Iron Fiber Absorbing Fabric
Chapter 12: Textile Materials and Technologies
Analysis on down Coat Fabric
Design Principle and Method of Digital Multicolored Warp Jacquard Fabric
Parameters of High-Density Soft Breathable and Anti-Velvet Fabric Technology
Research on the Ballistic Performance of UD Cloth/3D Fabric Composite Target
Testing of the Dynamic Permeability and Deformation of Airbag Fabrics
Comparative Study between DSC and Two Complementary Performance Evaluation Methods for PCM-Treated Textiles
Chapter 13: Corrosion and Surface Treatment Technology
The Effect of Wear and Corrosion Resistance of Austenitic Stainless Steel on Plasma Carburizing
Study of EMISE Ionic Liquids Inhibitor on the Corrosion Behavior of Steel Rebar by Statistical Methods in Alkaline Chloride Solution
Multiple Regression Corrosion Models and Corrosion Mechanism of High Chromium Cast Iron under Phosphoric Acid Medium Condition
Application of Visual Basi
