Sonstiges, Englisch, 2420 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, 2420 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-908453-59-8
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
New Perspectives for Wrought Magnesium AlloysAutomotive Mg Research and Development in North AmericaState of the Art in the Refining and Recycling of MagnesiumResearch and Development of Processing Technologies for Wrought Magnesium AlloysOverview of CAST and Australian Magnesium ResearchDevelopment of Magnesium Alloys with High PerformanceEffects of Microstructure and Partial Melting on Tensile Properties of AZ91 Magnesium Cast AlloyEffect of Heat Treatment on the Microstructure and Creep Behavior of Mg-Sn-Ca AlloysCreep Behaviour and Microstructure of Magnesium Die Cast Alloys AZ91 and AE42Growth Rate of Small Fatigue Cracks of Cast Magnesium Alloy at Different ConditionsA Cyclic Stress-Strain Constitutive Model for Polycrystalline Magnesium Alloy and its ApplicationDynamic Stress-Strain Behavior of AZ91 Alloy at High-Strain RateMicrostructure Evaluate System of Semi-Solid FormingZr-Containing Precipitates in Mg-3wt%Nd-0.2wt%Zn-0.4wt%Zr Alloy during Solution Treatment at 540?CMicrostructure, Mechanical Properties, Creep and Corrosion Resistance of Mg-Gd-Y-Zr(-Ca) AlloysEffects of Er on Microstructure and Mechanical Properties of Mg-Zn-Er-Zr Magnesium AlloysMicrostructure Simulation of Die Casting AZ91D AlloyA Novel Squeeze Casting Process for Producing Magnesium WheelsEffective Protection of Magnesium Melt Surface from Oxidation Using HFC125-Containing Shielding GasDevelopment of a t-Type Mg-Zn-Al Alloy: An Investigation of the Microstructure and Solidification CharacteristicsUltrasonic Treatment of Magnesium Alloy Melts and its Effects on Solidification MicrostructuresMicrostructure Simulation of Magnesium AlloyEffect of Sc on Microstructures and Corrosion Properties of AZ91Microstructure of AZ91D in Different Treatment ConditionsLow-Cycle Fatigue Behavior of Three Die Cast Magnesium AlloysCompression Deformation Behavior of AZ91D Magnesium Alloy in Semi-Solid StateEffects of CaCO3 Modificator on Microstructure and Mechanical Properties of Cast AZ91 Magnesium AlloyMicrostructure and Mechanical Properties of Mg-Gd-Sm-Zr AlloyMechanical Properties and Creep Behavior of Mg-Gd-Y-Zr AlloysMicrostructure and Mechanical Properties of Low Pressure Die Cast AM50 Magnesium AlloyTensile and Compressive Creep Behavior of Coarse-Grained Mg-Al-Sr CastingsInfluence of Cooling Rates on the Dentrite Morphology and Hardness of the Surface-Chilled Mg-10Gd-3Y Magnesium AlloyEffect of Si, Sr Additions on Microstructure and Mechanical Properties of AZ91 AlloyEffects of Al-Sr Master Alloys on the As-Cast Microstructure of the AZ31 Magnesium AlloysThe Microstructure and Mechanical Properties of Mg-8Zn-8Al-4RE Magnesium AlloyEffects of Aluminum Content on the As-Cast Microstructure and Mechanical Properties of Mg-xAl-0.7Si Based AlloysChange of Inclusion and Mechanical Properties of Magnesium Alloy during Vacuum MeltingEffect of RE Content on the Fracture Behavior in Mg-Gd-Nd-Zr AlloysMicrostructure and Precipitates in Mg-Zn-Y AlloysStudy on Electromagnetic Vibration Casting (EVC) of Magnesium AlloysInfluence of RE on Microstructure and Mechanical Properties of Mg-Li-Al AlloysEffects of Non-Flux Purification on the Microstructure and Mechanical Properties of AZ31+xCa Mg AlloyA Constitutive Model for Casting Magnesium Alloy Based on the Analysis of a Spherical Void ModelMicrostructures and Mechanical Properties of Mg-Li-Zn Alloys as Processed by ECAEMicrostructural Characterization and Mechanical Behavior of an Mg-9%Li-1%Zn AlloyEffect of Grain Size on Necklace Formation of Magnesium AlloysElevated Temperature Mechanical Behavior of Mg-Y-Zn AlloysMicrostructures, Tensile Properties and Forming Process of AZ31 Alloy SheetsEffect of Temperature on Microstructure and Texture during Compression of AZ31Effect of Second Phase on the Mechanical Properties of Mg-Al-Zn Alloy by Equal Channel Angular ExtrusionMicrostructure Evolution and Mechanical Properties of an AZ61 Mg Alloy through Cyclic Extrusion CompressionEffects of Extrusion on the Mechanical Properties and Damping Capacity of Mg-1.8Cu-0.5Mn AlloyFracture Mechanism Analysis of Mg-9Gd-4Y-0.6Zr AlloyAnnealing Behavior of the Compressed AZ31 Magnesium Alloy with Different StrainCompressive Deformation of Cast AM60B Mg Alloy at Elevated TemperaturesThe Experimental Research on the Formability of Stamping of Magnesium Alloy AZ31B SheetsThermo-Mechanical Coupled Simulation of Warm Stamping of AZ31 Magnesium Alloy SheetExperimental Research on Warm Deep Drawing of Magnesium Alloy Sheet by Variable Blank Holder Force ControlNumerical Simulation of Magnesium Alloy AZ31B Sheets with Thermal Deep-Drawing ProcessInfluence of Deformation on Precipitation and Recrystallization in an AZ80 Magnesium AlloyA Preliminary Analysis on Compression Twins in MagnesiumEffect of Nd on Microstructures and Properties of AZ31 Wrought Mg AlloyMechanical Properties of Mg-8Zn-4Al-xCa Extruded Magnesium Alloy Tube at Elevated TemperatureInfluence of Rolling Temperature on Microstructure and Tensile Properties of AZ31 SheetsEffect of Second-Phase Particles on Grain Refinement of Mg-Al-Zn Alloy during ECAEEffect of Cooling Rate on the Microstructure and Mechanical Properties of ZK60 AlloyMicrostructure and Mechanical Properties of Extruded Mg-Zn-Gd-Based Alloy Reinforced by Quasicrystals and Laves PhaseDevelopment and Validation of Extrusion Limit Diagram for AZ31 and AM30 Magnesium AlloysWarm Hydroforming of Magnesium Alloy AZ31 SheetsSuperplastic Behavior of an Extruded Mg-Zn-Y-Zr AlloyThe Fatigue Crack Propagation (FCP) Behavior of the Forged Mg-Zn-Y-Zr AlloyTexture Evolution in Rolled Mg-13wt%Li-X AlloyAnnealing Process Optimization of a ME Wrought Magnesium AlloyEffects of Homogenization on the Formability of ZM21 AlloyStatus and Development of Magnesium Alloy Thin Strip CastingRolling of AZ31 Magnesium Alloy Thin StripThe Influence of Zinc and Zirconium on the Microstructure of the As-Cast Magnesium Alloy ZK60Hot Compression Deformation Simulation of AZ61B Magnesium AlloyEffect of Rolling and Annealing on the Mechanical Properties and Microstructure of AZ31 Magnesium AlloyStudy on Solidification Microstructure of AZ31 Alloy Strips by Vertical Twin Roll CastingSuperplastic Forming Limit and Instability of AZ31B SheetEffects of Zn on Mechanical Properties of MZK60 Wrought AlloyPhase Analysis of Al-Mn Compounds in the AZ Magnesium AlloysMicrostructures and Mechanical Properties of AZ31B Extruded Sheets from Different Casting ProcessingEffect of Hot Extrusion, Hard Drawing and Heat Treatment on Properties and Structure of MB5B Wrought Mg AlloyEffect of Temperature and Relative Humidity on Fatigue Crack Propagation Behavior of AZ61 Magnesium AlloyEffect of Nd and Y Addition on Microstructure and Mechanical Properties of Extruded Mg-Zn-Zr AlloyDiffusion Bonding of Magnesium, Zirconium and Titanium as Implant MaterialInvestigation on the Potential of Magnesium Alloy AZ31 as a Bone ImplantAging Behavior of Mg-9Gd-4Y-0.6Mn AlloyPreparation of Amorphous Mg-Ni Alloy by Mechanical Alloying and Investigation on its Hydrogen Storage PropertiesStudy on the Microstructure and Mechanical Property of High Strength Mg-Nd-Zn-Zr AlloyOn the Infiltration of Fiber Reinforced AZ91D AlloyThe Cathodic Reduction Processes of SiO2 Impurity in Magnesium ElectrolysisExpulsion in Resistance Spot Welding of AZ31B Magnesium AlloyThe Thermodynamics Calculation of Mg-Zn AlloyA Database Prototype of Magnesium Alloy Based on InternetMicrostructure and Electrochemical Properties of Mg2Ni Substituted by Al, TiBiocompatibility Evaluation of Magnesium-Based MaterialsPreparation of Mg-Sr Alloys Using Vacuum Reduction: A Thermodynamics ApproachStudy on the Process and Mechanism of Rolling-Bonding between Magnesium and AluminumNickel Foam Reinforced AZ91 Magnesium AlloyEXAFS Study of Annealing Effects on Mg65Cu25Gd10 Metallic GlassInteraction between Carbon Nanotube and Mg Surface: Ab-Initio InvestigationMechanical Behavior of Gas Tungsten Arc Surface Modified Composite Layer on Mg Alloy AZ31 with SiCp and AluminumIntermediate Phase Growth of Mg-Al Diffusion Couple under a Strong Static Magnetic FieldApplication of G-L Dislocation Model in Low Frequency Damping Capacities of AZ91D and SiCw/AZ91D CompositesProcessing, Microstructure and Mechanical Properties of SiCp/AZ91 Mg Matrix Composites Fabricated by Squeeze CastingMicrostructure and Mechanical Properties of New Particle-Disperse-Reinforced Mg Composite Mg- 6Al- 3B2O3- 1NaCl- 1CaCl2Measurement of Press Creep Stress Exponent of ZM6 Alloy at Room Temperature Surface Modification of AZ91 Magnesium AlloyMagnesium Films Deposited on Different Substrates via Arc PVD MethodCorrosion Protection of Joining Areas in Magnesium Die-Cast and Sheet ProductsEffects of Post Heat Treatment on the Interfacial Characteristics of Aluminum Coated AZ91D Magnesium AlloyEffect of Aging on Electrochemical Behavior of T6-Treated WE54 Mg AlloyIn Situ Observation of Initial Corrosion of AZ91 Alloy with Residual Stress in Wet-Dry Conditions Using Environmental Scanning Electron MicroscopeGrowth and Microstructure of Microarc Oxidation Coating on Al18B4w/AZ91 Mg Matrix CompositeEffect of Pulsed High Energy Electron Beam on Surface Modification of AZ91 Magnesium AlloyIon Implanted AZ31 Magnesium AlloyRare Earth Conversion Coating of Magnesium Alloy AZ91DEffect of Heat Treatment on Corrosion and Electrochemical Behaviors of Mg-3Nd-0.2Zn (wt.%) Magnesium AlloyEffect of CeCl3-Containing Flux on Microstructure and Mechanical Properties of Mg Alloy Containing Rare EarthEffect of Strontium on Mechanical Properties and Corrosion Resistance of AZ91DApplication of Electrochemical Techniques to Characterization of the Corrosion Behaviors of GW63 AlloysA Comparison on Ceramic Coating Formed on AM50 Alloy by Micro-Arc Oxidation in Two ElectrolytesCharacteristics of Acoustic Emission during Fatigue of As-Rolled AZ31B Magnesium AlloyComparison of Coating Properties by Two Pulse Modes on Magnesium AlloyEstablishment of a Model of Growing Anodizing Film on AZ91D Mg AlloyZn Coatings on AZ91D Magnesium Alloy Prepared by Electroplating from the Electrolyte Containing SnO2 solStudy on Phosphating on the Magnesium AlloysSurface Modification of Magnesium with Rare Earth Conversion Films for Biomedical ProtectionFluidity Evolution of an Al-10%B4C Metal Matrix CompositeEffect of Mg Content in Matrix on Infiltration Height in Producing MgO/Al Composite by Vacuum Infiltration MethodModification of A3003 Alloy for Development of High Toughness Al Alloy TubeEffect of Si on As-Cast Microstructure in Quasicrystalline Al-Cu -Fe AlloyStudy on the Erbium Strengthened Aluminum AlloyMicrostructural Evolution in Al-Sc and Al-Sc-Zr AlloysDamping Properties of 6063Al/Al2O3 SiO2 Particle Reinforced CompositesMicrostructures and Dynamic Compression Properties of a High Reinforcement Content TiB2/Al CompositeInterfacial Reaction in Al Matrix Composites Reinforced by Mg Borate WhiskerEffect of Silicon Addition and Thermal History on the Thermal Expansion Behavior of SiC/Al CompositesThe Influence of Interfacial and Structural Parameters on the Elastic Modulus of SiCp/6066Al CompositesMicrostructural Characterization of Sprayed Aluminum Matrix Composites Reinforced by SiC ParticlesEffect of Current Density on Morphology and Corrosion Resistance of Anodized Coating on SiCp/2024 Al CompositeEffects of Temperature on the Weldability of Powder Metal Parts Joined by Diffusion WeldingMicrostructure and Performance in Diffusion Welded Joints of Al +5-10-15% WCp CompositesApplication of Microstructure Sensitive Design to FCC PolycrystalsCoating Effect on Increasing Mechanical Property of 6061-T651 Alloy by Laser Shock ProcessingNumerical Analysis of Nano- or Micro-Crystalline Materials during ECAP by Dislocation Evolution Method Low-Frequency Electromagnetic Field Influencing Horizontal Direct Chill Casting of Aluminum Alloy RodsNew Method and Experimental Study for Fast Evaluating Filling Mould Ability of Al-Si Alloy by Surface TensionPrediction of Fracture in Square-Cup Forming of Aluminium AlloyNumerical Modeling of Low Frequency Electromagnetic Casting of 7XXX Aluminum AlloysMicromechanism of Plastic Deformation on Elastic ModulusHomogenization Treatment of an Al-Li-Cu-Mg-Mn-Zr AlloyInfluence of Pulse Electric Current on Solidification Structures of Al-Si AlloysRheological Behavior and Thermo-Mechanical Coupling Analysis of Aluminum Continuous Roll Casting ProcessNumerical Simulation on Conform Process of Aluminum Alloy Rectangular Hollow Conductor3-D Coupled Fluid-Thermal Finite Element Analysis of 3C-Style Nozzle?s Fluid Field of Al Roll-CastingFriction and Wear Properties of Friction Stir Welds of 5052 Al AlloyHot Deformation Behavior of 2519 Al Alloy during Isothermal CompressionMicrostructure and Grain Refining Performance of a Rapidly Solidified Al-5Ti-1B Master AlloyEffect of Calcium Addition and Heat Treatment on the Al-Zn-In Alloys as Sacrificial AnodeAccumulative Roll-Bonding (ARB) of Sheets of Aluminium and its Commercial Alloys AA8006 and AA5754 at Ambient and Elevated TemperaturesOverview of Recent Work on Precipitation in Al-Cu-Mg AlloysCorrelation of Mechanical Properties with Defect Structure in Commercial Pure Al and Al-Mn Alloys Studied by Positron Annihilation SpectroscopyMorphological Changes and Plume Deflection Effect during Pulsed Laser Ablation Deposition of AlMicrotexture Development and Flow Stress Saturation during Triaxial Forging of an Al-3Mg-Sc(Zr) AlloyRemoval of Na and Ca from Aluminum Scrap through FiltrationEvolution of Micro-Textures within Individual Grains in Rolled Polycrystal AluminumInvestigation of Inhomogeneous Deformation on Meso-Scale with Crystal Plasticity Finite ElementAtomic Bonding and Properties of Al-Li Alloy in Earlier Ageing StageStudy of Cu Addition on Precipitation Behaviors and Mechanical Properties in AA6082 Al-Mg-Si AlloyEffect of a Si Additive on an Al Grain Boundary: A First-Principles InvestigationNumerical Simulation on Influence of Clearance and Friction on Wrinkling in Bending of Aluminum Alloy Rectangular TubesSmall Angle X-Ray Scattering Study in Equal-Channel Angular Pressed 7055 Al AlloysEffect of Cryogenic Treatment on Mechanical Properties and Microstructures of 3102 Al-AlloyInfluence of Ageing Treatment on Microstructure and Properties of 7150 AlloyEffect of Second Phases on Tensile Property in Artificial Ageing and RRA Process of Super-High Strength Aluminum AlloyEffect of Minor Sc and Zr on the Fatigue Properties of Al-Mg-Mn AlloyAging Characteristics of 7A52 Al-Zn-Mg AlloyStructure and Property of Nickel-Modified Ultrahigh Strength Al-Zn-Mg-Cu Alloy by Spray FormingOptimizing Solution Heat Treatment to Improve Mechanical Properties of Al Alloy 7055Prediction of Hardness of Aluminum Alloy 7055 by Quench Factor AnalysisShear Pressing for Grain Refinement of Al-Mg-Li SheetParticle-Stimulated Nucleation of Recrystallization for Grain-Size Control in 01420 Al-Li Alloy3D FEM Simulation of Void Growth in Aluminum Single CrystalsEffect of Trace Element Er on Al-Mg and Al-Mg-Mn AlloysInvestigation on Wear Resistance of Al-Si-Ti Piston Alloys Produced by ElectrolysisCracking Susceptibility and Joint Property Study of the 6061 AluminumGrain Refinement of an Al-Cu-Mg Alloy by Microalloying and Common Thermo-Mechanical TreatmentEffects of Electromagnetic Pump Casting on Microstructure and Mechanical Properties of ZLSi9Mg Casting Aluminum AlloyMicrostructure and Thermal Stability of Al-Mg-Mn Alloys by Equal Channel Angular Pressing at Elevated TemperatureMorphology and Distribution of in Al-Fe Alloy under an Alternating Magnetic FieldEffects of Titanium Refining Methods on the Microstructure and Mechanical Properties of A356-0.1%Ti AlloysAlloying Behavior of Rare-Earth Er in Al-Cu-Mg-Ag AlloyModifying Effect of Al-Ti-C-P Master Alloy on Hypereutectic Al-Si AlloyEffect of Low Frequency Electromagnetic Field on Microstructures and Macro-Segregation of Direct Chill Casting Al-19.2%Si AlloysThrough-Thickness Microstructure, Texture and Strength Gradients in AA 7055 Rolled PlateInfluence of Scandium on Microstructures and Mechanical Properties of Al-Zn-Mg-Cu-Zr AlloysEvolution of Flow Stress and Microstructure in an Al-Zn-MgSeries Alloy during Hot DeformationEffect of Extrusion Temperature and Rate on Formability and Microstructure of 7075 Aluminum AlloyCharacterization of Precipitation in Al-Zn-Mg-Cuand Li Containing Al-Zn-Mg-Cu Alloys after Isothermal AgingObservation of As-Cast Microstructure Feature of Al Sheet Used for Can Manufacturing with High Forming PropertiesMetallographic Characterization of Porosity in A Cast Aluminum Alloy A356-T6Microstructures and Mechanical Properties of an Al-Cu-Li-Mg-Zr Alloy Containing Zn and MnEffects of High Gradient Magnetic Fields on Solidified Structures of Non-Magnetic Metals with Different SusceptibilitiesCorrection of Ghost in Reduced ODF with Particle Swarm Optimization AlgorithmHRTEM Analysis of Aging Electrolytic Low-Ti Al AlloyEffect of Yb Additions on Microstructures and Properties of High Strength Al-Zn-Mg-Cu-Zr AlloysThe Effects of Thermo-Mechanical Treatment on the Properties of 2519 Aluminum AlloyCharacters of Coarse Grains Subdivisions in Rolled Polycrystalline AlMicrostructural Evolvement of Al-1.5Si-1.1Mg-0.5Cu Alloy Ingot during Homogenization TreatmentPerformance of Electromagnetic Purification System in Continuous Twin Roll Casting of Aluminum SheetMicrostructure Inhomogeneities in 2519A Aluminum Plate Penetrated by an Incendiary ProjectileMagnetically Aligned Al3Ni Phase in Al-Ni Alloys Solidified with a High Magnetic FieldDynamic Recrystallization of 3104 Aluminum Alloy during Isothermal Compression Deformation at Elevated TemperaturesInvestigation of Flow Stress Behavior and Microstructural Evolution of 7050 Al AlloyInfluence of Zr on the Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu AlloyTensile Properties of Large Extrusion and Forgings of RS P/M Al-9Fe-1.9Mo-1.7Si Aluminum AlloyStudy on Microstructural Evolution and Age Hardening in High-Purity Al-Cu-Mg-Ag AlloyFlow Field and Gas-Bubble Size Analysis in Water Model for the Process of Aluminum Melt Degassing by Particle Image VelocimetryCorrosion Behavior of Metallic Materials in Ethanol-Gasoline Alternative FuelsStructural Characterization and Corrosion Properties of BTESPT Silane Films on Surface of 2024-T6 Aluminium AlloyEffect of Pre-Rolling Reduction on Intergranular Corrosion of Aluminum Alloy 2519AInfluence of the Nickel on the Corrosion Behavior of Al-Mg-Sc-Zr AlloyThermal Stability of Nanocrystallized Surface Layer in Al-Zn-Mg Alloy by Surface Mechanical Attrition TreatmentSurface Morphology and Discharge Channel Temperature Estimation of PEO Ceramic Coatings on AluminumEffects of HTCA on Microstructure and Surface Morphology of Porous Anodic Alumina MembraneStructure and Properties of Microarc Oxidation Films on Zinc-Containing Aluminum AlloyAnti-Oxidation and Anti-Corrosion Properties of Al-Si Metal AnodesCorrosion Behavior Improvements of High Active Aluminum Alloy Anode in Alkaline Solution by Adding InhibitorsExfoliation Corrosion Behavior of 2524 Aluminum AlloyLiquation Cracking in Heat Affected Zone in Ni Superalloy WeldsThe Future of Commercial Air Transport and Aeroengines: Challenges and OpportunitiesFrench Research and Development Activities on High-Performance Superalloys for Gas Turbine ComponentsAtomic Partitioning of Platinum and Ruthenium in Advanced Single Crystal Ni-Based SuperalloysEffect of Ru on Microstructure of a Single Crystal Nickel-Base SuperalloyEffects of Ru Additions on the Microstructures and Stress Rupture Life of a Directionally Solidified Ni-Based Cast SuperalloyInfluence of Ru and Cr on the Heat-Treated Microstructure of Ni-Based SuperalloysDislocation Deformation Mechanisms during Fatigue of the Nickel-Based Superalloy CMSX-4Temperature Dependence of High-Cycle Fatigue Behavior of a Ni-Base Single Crystal SuperalloyMicrostructure Evolution and Strain Features of a Single Crystal Nickel Base Superalloy during Tensile/Compression CreepSurface Recrystallization and its Effect on Rupture Life of SRR99 Single Crystal SuperalloyPrecipitate Free Zones along Recrystallization Grain Boundaries during Creep in a Directionally Solidified SuperalloyInfluence of Aging Temperature on the Microstructure and Stress Rupture Property of DZ951 AlloyEffect of Temperature on Formation of Borides in TLP Joint of a Kind of Nickel-Base Single Crystal SuperalloyStress Rupture Properties of the Second Generation Single Crystal Superalloy DD6 after High Temperature ExposureIsothermal Oxidation Behavior of Ni Base Superalloy DM02 for High Temperature DiesEffect of Alloying Elements on Microstructure and Mechanical Properties of High Temperature Die Material DM02 AlloyDevelopment and Characterization of Overspeed and Cyclic Behavior of Dual Grain Structure Turbine DisksINCONEL Alloy 783: An Oxidation Resistant, Low Expansion Superalloy for Gas and Steam Turbine ApplicationsDevelopment of New Generation Turbine Disk Superalloys in the HTM21 ProjectHigh Temperature Structure Stability Study on Nb-Containing Nickel-Base SuperalloysThe Studies of Non-Equilibrium Grain Boundary Segregation in Ni-Base SuperalloyInvestigation on Dynamic Recrystallization Behavior in Hot Deformed Superalloy Inconel 718Degeneration of Primary MC Carbide in a Cast Ni-Base SuperalloyOptimization of Nd:YAG-Laser Welding Process for Inconel 718 AlloyFemtosecond Laser Ablation of a Single Crystal Superalloy CMSX-4 in Different EnvironmentsResearch on Sheet Metal of a New Ni-Based Superalloy Prepared by EB-PVDQuantification of High Temperature Strength of Nickel-Based SuperalloysOptimisation of Spray Forming Ni Superalloys via Process Modelling and On-Line MonitoringInterface Energy Calculation of ?-?' in Ni-Al System Using the Cluster Variation MethodDensity of Ni-Co-Al Ternary Alloys in Liquid States Measured by a Modified Pycnometric MethodTensile Creep Behaviors of a P-Type Structure Single Crystal Nickel-Base SuperalloyPhase Transformation in Binary Titanium-Base Alloys with Metals of the I, IV-VIII GroupsHigh Fugacity Hydrogen Effects in Beta-21S Titanium AlloyFinite Element Analysis on Superplastic Blow Forming of Ti-6Al-4V Multi-SheetsHydrogen's Absorption/Desorption Behavior in Gaseous-Phase Charged Duplex-Annealed Ti-6Al-4V AlloyResearch on Semi-Solid Deformation and Forging Behavior of Ti14 AlloyMechanical Properties and High Temperature Deformation of Beta Titanium AlloysHot Deformation Behavior and Microstructure Evolution of Ti-6.5Al-1.5Zr-3.5Mo-0.3Si with an Equiaxed a+? Starting StructureIn Situ AFM Observation of Mechanical Behavior of Beta Titanium Alloy in Nano-Indentation TestMicrostructural and Mechanical Characterization of TiAl/Ti6242 Diffusion BondsStudy on Combustion Synthesis and Densification Process for Titanium Diboride and Iron Layered MaterialsPredeformation Effects on Shear Response and Microstructure in Pure Titanium-TA2Hydrogen Behavior in GTA Welded Ti-6Al-4V and Beta-21S Aerospace Applicative Titanium AlloysA Novel Canning Technology for Forging of Gamma-TiAl AlloysMechanical Property and Elastic Modulus of Metastable Ti-Nb Based Alloys with Si AdditionInfluence of Rapid Solidification on the Microstructure and Mechanical Properties of NiAl-Based Near Eutectic AlloysStudy on Fracture Behavior of ?-TiAl Based AlloysEffect of Heat Treatment on Microstructure and Mechanical Properties for a Ni3Al Base Single Crystal Alloy DDIC6Microstructure Evolution of Ti-Al Peritectic System during the Initiated Stage of Directional SolidificationTheoretical Prediction of Ternary Site Occupancies in ZrCr2 and NbCr2 Laves PhasesFirst-Principles Study on Initial Oxidation of NiAl(110)Study of Hot Deformation Characteristics of an As-Cast Ti-22Al-25Nb AlloyNiCr-CrAl Coating for Ni3Al Base Alloy IC6AEA First Principle Study of the Effect of Nb on the Oxidation Behavior of NiTi AlloyEffects of Nb on the High Temperature Mechanical Properties of TiNiAl AlloysEffect of Mo on the Oxidation Behavior of NiTiAl AlloyEffects of Cr and Al on High Temperature Oxidation Resistance of Nb-Si System IntermetallicsEffect of B on the Microstructures and High Temperature Oxidation Resistance of a Nb-Si System In Situ CompositeStudy on Interface Reactions between Nb-Si System In Situ Composite and CeramicsPreparation and Mechanical Properties of C/C-SiC CompositesFabrication of AlN-SiC-TiB2 Ceramics by Self-Propagating High Temperature Synthesis and Hot Isostatic PressingRoom and Elevated Temperature Mechanical Properties of Hot-Pressed Uni-Cf/SiO2 CompositeIn Situ Composites: Effect of Intermolecular Hydrogen Bonds on Polyamide 66/TLCP BlendsEffect of Needling Parameters on Mechanical Properties of C/C Composites Reinforced by Carbon ClothEffect of Silica on the Electrical Properties of Epoxy of Phenolic Resin/Carbon Black/Silica Composite CoatingEffects of Interphase Thickness on Damping Behavior of 2D C/SiC CompositesStudy on Tensile and High Cycle Fatigue Properties of TiC Particle Reinforced Titanium Matrix CompositeUse of WEDM in the Characterization Process of Al/2-Phase Systems Consolidated by Multilayer Cylindrical Dynamic Compaction MethodEffect of Ozone Treatment on the Interfacial Properties of High Modulus Carbon Fiber/Epoxy CompositesLight Weight and High Modulus Aluminum Matrix Composite and its Application into AerospaceFinite Element Analysis of Interfacial Debonding Damage in Fiber-Reinforced Ceramic Matrix CompositesPreparation of AlN-BN Composite by Composite PowdersDistortion Simulation of Unsymmetrical Composite Laminates Using the Finite Element Analysis MethodDesign of a Deployable Antenna Actuated by Shape Memory Alloy HingeEffect of Electrochemical Treatment on the Surface Structure and Tensile Strength of Carben Coated CVD SiC FiberOptimum Design, Microstructure and Mechanical Properties of Ti/Ti3Al Multi-Layered MaterialsStudies on Thermal Property of Silica Aerogel/Epoxy CompositeAcoustic Emission Research on Thermal Shock Behaviors of Three-Dimensional C/SiC Composites in Different EnvironmentsA Finite Element Model and Experimental Verification for the Mechanical Properties of 2.5-D Braided CompositesMicrostructural Characterization and Properties of SiC/Al Composites for Electronic Packaging Fabricated by Pressureless InfiltrationOptimization of Radar Absorbing Structure Using the Genetic AlgorithmModification of Diallyl Isophthalate with Dimethacrylate Liquid CrystallineReaction Mechanisms of Combustion Synthesis of Si3N4 -SiC -TiN CeramicsMicrostructures and Toughening Mechanisms of Y2O3 Doped Al2O3/ZrO2 Eutectic Composite Ceramics Prepared by SHS Melt-Growth ProcessInvestigation on a Novel Low Temperature/Vacuum Bag Cure PrepregKinetics of Interfacial Reaction in SiCf/Ti6Al4V CompositesEffect of Mo on Properties and Microstructure of Steel-Bonded Cemented Carbide GT35 Produced by In Situ Reduction of IlmeniteInternal Friction Behaviors of TiNi Shape Memory Alloy Fiber/Ni Matrix CompositeQuantitative Analysis on Fracture Mechanism of Al Melt Oxidatively Infiltrated SiCp/Al2O3-Al Composites by XPSStudy on the Vibration of a Sandwich Beam with Smart Composites?MRFEffects of Particle Size on Microstructure of the Matrix Alloy in Aluminum Matrix CompositesMechanical and Microwave Dielectric Properties of Csf/Si3N4 CompositesPores in PAN-Based Carbon Fiber and Effects of Pore Defects on Mechanical PropertiesTactile Display Based on Controllable Fluid ActuatorStructural Optimization Design of MR Fluid ClutchIn Situ Measurement on the Pressure and Resin Flow in Hot Press Process of CompositesAdvanced Graded Protective Coatings, Deposited by EB-PVDEffect of Hf Addition on High Temperature Properties of Ir-Containing Alloy CoatingsA Comparison of the Mechanical Properties of RF- and DC- Sputter-Deposited Cr Thin FilmsFormation and Characterization of the Quasicrystal FilmsSuspension Development for Electrophoretic Deposition of Mullite CoatingOxidation Behavior and Residual Stress in Thermally Grown Oxides of Detonation and High Velocity Oxygen Fuel Sprayed NiCrAlY CoatingsThermal Cycling and Hot-Corrosion Behavior of Plasma Sprayed Segmented Thermal Barrier CoatingsInfluences of Argon Atmosphere on Ceramic Coatings on Ti?6Al?4V Alloy by Micro-Plasma Oxidation in Different SolutionsDevelopment and Oxidation Resistance of Si-Modifide MCrAlY Coatings on Nb-Base AlloyOptical Absorption Properties of Nanotitanium Dioxide Doped ZnO/Silicone Thermal Control CoatingTi-N-C Films Deposited by Ion Beam Assisted MF Twin Targets Unbalanced Magnetron SputteringMicrostructure Evolution of Nd2O3 and Yb2O3 Co-Doped YSZ Thermal Barrier Coatings during High Temperature ExposureInfluence of NiCoCrAlY and Diffusion Aluminide Coating on Oxidation and Hot Corrosion of a Ni-Based SuperalloyEvaluation of Tribological Properties of a Cathodic Arc Ion-Plated CrSiN Coating under Both Unlubricated and Boundary-Lubricated ConditionsElectrochemical Corrosion Behaviors of Ti2AlNb with Double Glow Plasma Surface ChromizedVisible-Blind Metal-Semiconductor-Metal Structured Deep-Ultraviolet Photodetectors Using Single-Crystalline Diamond Thin FilmCorrosion Properties of Inconel Alloy 600 Coated by Simultaneous Aluminizing-Chromizing ProcessMicroarc Oxidation Coatings Fabricated on Ti3Al-Based Alloy in Silicate ElectrolyteMagnetron Sputtering High Temperature Mo-Al2O3 Cermet Solar Selective CoatingsHf Modified NiAl Bond Coat for Thermal Barrier Coating ApplicationEffects of EB-PVD Process TGO Formation and Growth within Thermal Barrier CoatingsLong-Term Oxidation Resistance of (Ti,Al,Y)N Coatings at 800 ?CNumerical Analysis of EB-PVD Thermal Barrier Coatings under Thermal-Mechanical Coupled EnvironmentThe Effects of Rare Earth Elements on Corrosion Resistance of Sol-Gel Coatings for 2024 Aluminum AlloyStructure and Anti-Corrosion of Tri-Layer Ni-P Amorphous Alloy Coating Prepared in the Same BathStudy on Interfacial Characterization and Mechanical Properties of Plasma-Sprayed Tungsten CoatingsPreparation of High Silicon Steel by EB-PVDMelting Temperatures of Several Oxides under PressureEffects of Ti-1023 Anodized Coating on Corrosion Behavior of Ti-1023/30CrMnSiA and Ti-1023/LY12 Galvanic CouplesTiny Crystals Surviving above the Melting Temperature and Acting as Growth Nuclei of the High-Tc Superconductor MicrostructureHigh-Strength Nb3Sn Wire Development for Compact Superconducting MagnetsDevelopment of Ag-Sheathed Bi2223 Tapes with Interfilamentary Resistive Barriers for Reducing AC LossesCoated Conductor: Some Critical Aspects from Substrate to DeviceArtificial Nano-Scale Precipitates for Flux Pinning in YBa2Cu3O7-d Thin Films and Coated ConductorsContinuous Deposition of Buffer Layers for YBCO Coated Conductor Using Reactive Magnetron SputteringNew Cu-Ni Substrate for Coated ConductorsA New Series of Potential Buffer Layers for REBCO Coated ConductorInfluence of Oxygen Partial Pressure on the Microstructures and Critical Current Densities of PMP-Processed YBCO Bulks with Submicron Y2BaCuO5 ParticlesEffect of Ultrafine Gd211 on Processing and Superconducting Properties of Gdbacuo Bulk SuperconductorsEffect of Temperature on La1.85Sr0.15CuO4 Single Crystal Growth by Floating Zone MethodNeutron Diffraction Studies of the Zr/Nb Effects on the Nb3Sn Phase Formation of Monofilament WiresCritical and Irreversibility Temperature Study of Internal-Sn Nb3Sn Superconducting WiresEffect of Heat Treatment on Superconducting Properties of Pure and Ti, Zr-Doped MgB2 Superconducting Wires Fabricated by In Situ PIT MethodMgB2 Superconducting Films Fabricated on Copper Substrate by Hybrid Physical-Chemical Vapor DepositionTransverse Compressive Stress Effects on the Critical Current of Bi-2223 TapesRound Multifilament Bi-2212/Ag Wire Development for High Field Magnet ApplicationsFinite Element Analysis of Quench Propagation Velocity in Bi-2223/Ag Superconducting Multifilamentary TapeHigh Magnetic Field Superconducting Magnet Technology and its ApplicationsA New HTS/PMG Maglev Design Using Halbach ArrayGround and Excited States of the Two and Three Dimensional Bipolaron in a Quantum DotStudy on the Relation between Electronic Structure and Tc for Cuprate Superconductor SystemsThe Progress on Study of Isotope Effects in High TC Copper Oxide SuperconductorsStudy on the Precursory Powder for Bi-2223 TapeInfluences of Preparation Conditions on Melting and Reformation Behaviors of (Bi,Pb)-2223 Core in the Ag-Sheathed TapeInfluence of Sheath Materials on the Strain Tolerance of Bi-2223 Superconducting TapesBending Strain Effects on the Critical Current of Bi-2223 Superconducting Tapes by Pure Bending MethodHTS High Q Resonant ControllerStudy on Minimum Propagation Current of Bi-2223/Ag Superconducting Multifilament TapeElectrical Properties of a High-Tc Superconductor-Polymer CompersiteResearch of Secondary Gel Technic to Synthesize Bi2Sr2CaCu2Oy SuperconductorInfluence of Processing Parameters on the Texture Formation in Powder Metallurgic Ni-5at.%W Substrate TapesTextured YBCO Films Derived from Low-Fluorine-Content SolutionPreparation of YBCO Superconducting Films by Sol-Gel ProcessEpitaxial Growth of CeO2 Buffer Layers on Both YSZ Single Crystal and Textured Ni5W Substrates by MOD MethodInvestigation Texture in Ni-W Alloy Substrates for Coated ConductorsTe Substitution Effect in Low-Dimensional Superconductor NbSe2-xTex (x = 0, 0.1, 0.2)Effects of Heat Treatments on the Nb3Sn Composite StrandsDeposition of MgB2 Thin Films on Nb Substrates Using an In Situ Annealing PLD MethodInfluence of Preparation Process on Microstructure, Critical Current Density and Tc of MgB2/Fe/Cu WiresInfluence of Mg and B Stoichiometry on the Formation Behavior of MgB2 PhaseComparative Studies of Nanoscale SiC Whisker and Si/N/C Doped MgB2 TapesEffect of Thickness on Properties of MgB2 Thin FilmsMgB2 Films on Nb Substrate and its Bending TestEffects of Nano-Al Doping on Superconductivity and Microstructure of MgB2 Bulk SuperconductorsImprovements on the Properties of the In Situ MgB2/Fe Tapes Annealed by Spark Plasma Sintering TechniqueEffect of Pulsed Magnetic Field Processing on MgB2 SuperconductorsMgB2 Thick Film Grown on Silicon Carbide Substrate by Hybrid Physical-Chemical Vapor DepositionSolution Phase Synthesis of Superconducting La2CuO4 MicrospheresThe Effects of BaF2 Addition on Melt-Processed YBa2Cu3O7-x SuperconductorsLevitation Capability of a Bulk YBa2Cu3O7-x with NdFeB Guideway by Two Magnetization MethodsCrystal Growth Mechanism of YBCO Superconductors Prepared by Unidirectional Solidification MethodAnalysis on the Ceasing Mechanism of the YBCO Crystal Growth during Melting Growth Process by Unidirectional SolidificationStudy of the Phase Formation of Sol-Gel YBa2Cu3O7-x Samples in Flowing Oxygen AtmosphereEffect of Magnet Moving Speed on the Relaxation Rate of the Levitation Force for YBCO BulkEffect of the Moving Speed between Magnet and Superconductor on the Levitation Force of Single-Domain YBCO BulkPerformance of Gd-Ba-Cu-O Superconductor Bulks with Ultrafine Gd2BaCuO5 Powders Prepared by Low-Temperature Combustion SynthesisBasic Analysis of Magnetic Field in High Temperature Bulk SuperconductorsIonic Cluster Effect in Suppression on Superconductivity in Doped Y123Simultaneous Substitution of Y and Ba by Ca in YBCOMicrostructures and Mechanical Properties of Porous Ti51Ni(49-x)Mox Shape Memory AlloysStructure, Magnetization and Magnetostriction of Sm(Zn1-xTx) (T=Fe, Co) AlloysEffects of ?-Ray Irradiation on Structure and Properties of ZnO:Al Thin FilmAdvanced Giant Magnetostrictive Alloys and Application in Actuators for Active Vibration ControlMicrostructure and Pseudoelasticity of Ti-Nb-Si Based Alloys with Biocompatible Alloying ElementsPreparation and Properties of Ceramic Tiles for Heat InsulationPreparation of FeCoZrBCu Thin Films and their Effect of Microstructure on Magnetic PropertiesMagnetic and Transport Properties of Mn-Si Films Synthesized on 4H-SiC(0001) SubstratesElectrochemical Fabrication of BixTe1-x (0.4 = x = 0.7) Nanowire ArraysCrystallographic Texture of MgO and its Effect on the Growth of BaTiO3 Thin Films by RF SputteringSintering of ?-Si3N4 Powder Prepared by Self-Propagating High-Temperature Synthesis (SHS)Fuzzy Dynamic Model of a Giant Magnetostrictive ActuatorMolecular Dynamics Study of the Structure in Vitreous Silica with COMPASS Force Field at Elevated TemperaturesStudy of a Ceramic Thermocouple for Al ProductionAdaptive Vibration Control on Six Degree-of-Freedom Magnetostrictive Smart StructureMagnetostriction and Hysteresis of (Tb,Dy,Ho)Fe2 AlloysThe Growth Mechanism of Quasi One-Dimensional ZnO Nanostructures Synthesized by Carbon Reduction without CatalystLow-Temperature Sintering and Dielectric Properties of (Zn1-xMgx)TiO3Giant Magnetostrictive Material Actuator Based Active Vibration Control-a Modified a - LMS AlgorithmStudy of the Structure and Magnetic Properties of Fe/Cu Superlattices from First-PrinciplesComparative Study of Recovery Strains in Severely Cold-Deformed NiTiInfluence of Carburization on Mechanical Behaviors of NiTiCu Alloy under Dynamic Impact LoadingFluorinated Acrylic Films: Effect of F Content on Aging and Corrosion Testing Heusler Type CoNiGa Alloys with High Martensitic Transformation TemperatureDesign and Modal Analysis of Fast Magnetostrictive Steering MirrorModeling Rate-Dependent Hysteresis for Magnetostrictive ActuatorEffects of Annealing on Phase Transformation and Mechanical Behaviors of NiTi Shape Memory Alloy Ultra Thin SheetMechanical Properties and Shape Memory Effects of TiNiNb Shape Memory Alloys with Low Niobium ContentDensity and Mechanical Strength of Ferrite for Inertial GyroscopeSynthesis and Low Temperature Magnetic Properties of Metal Elements Filled Polymer-Derived SiCN Ceramic CompositesMicro-Pore Structure and Mechanical Properties of High Temperature Self-Lubricating Biomimetic TiC/FeCrWMoV CermetsPreparation of Green Tapes for LTCC/Cu Multilayer SubstratesFabrication of Mo/Cu Functional Graded Material by Resistance Sintering under Ultra-High PressureEffect of Tin Additive on the Microstructure and Loss of Ferrite for Switching Mode Power Supply A New Bulk Deformation Method ? Cyclic ExtrusionTemperature Measurement and Microstructure Control for Rene88DT Superalloy during Laser Rapid FormingThe Dispersion of MWCNTs within Epoxy by Treatment with Coupling and Dispersing AgentsHot Corrosion Behavior of AlCuFeCr Quasicrystalline Coating on Titanium Alloy with the Mixture of NaCl and Na2SO4 Deposit
