Special and High Performance Structural Materials

This is the proceedings of the selected papers presented at Chinese Materials Congress 2015 (CMC2015) held in Guiyang, China, July 10-14, 2015.This is the volume for Part 3 including 131 papers selected from 7 symposia of BB. Amorphous and high entropy alloys; DD. Magnesium Alloys; R. Advanced Metal Matrix Composites; S. High Temperature Structural Materials and Coating; T. High Performance Titanium Alloy; U. Powder Metallurgy; V. Pipeline and Pressure Vessel Materials
Erscheinungsjahr 2016
ISBN: 978-3-03859-567-0
Verlag: Trans Tech Publications

Sonstiges, Englisch, Band Volume 849, 896 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Reihe: Materials Science Forum

This is the proceedings of the selected papers presented at Chinese Materials Congress 2015 (CMC2015) held in Guiyang, China, July 10-14, 2015.
This is the volume for Part 3 including 131 papers selected from 7 symposia of BB. Amorphous and high entropy alloys; DD. Magnesium Alloys; R. Advanced Metal Matrix Composites; S. High Temperature Structural Materials and Coating; T. High Performance Titanium Alloy; U. Powder Metallurgy; V. Pipeline and Pressure Vessel Materials

Autoren/Hrsg.

Han, Yafang

Wu, Ying

Li, Guangxian

Pan, Fu Sheng

Fan, Runhua

Liu, Xuefeng

Fachgebiete

• Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Pulvertechnologische Verfahren
• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Metallische Werkstoffe
• Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Metallurgie
• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Festigkeitslehre, Belastbarkeit

Inhaltsverzeichnis

Microstructure of Nb-Ta-V Based Hydrogen Permeation High Entropy AlloysAnalysis of Shear Banding in Zr-Based Metallic Glass under Laser Shock Peening and BendingFabrication and Characterization of Micro-Dent Produced by Laser Shock Peening on Zr-Based Bulk Metallic GlassDamage Characteristics of Zr-Based Metallic Glasses under Helium Ions IrradiationEffect of DC Pulse Patterns on Spark Plasma Sintering Process of [Fe0.8Co0.2B0.05Si0.2]96Nb4 Bulk Metallic GlassEffect of Ta Addition on Structural Evolution and Mechanical Properties of the CoFeNi2W0.5 High Entropy AlloyMicrostructure Evolution and Hardness of AlCrFeNixMo0.2 High Entropy AlloyInvestigation of Viscosity Measurements of Molten Fe-Si-B-Nb AlloysEffect of Annealing Treatment on the Microstructure and Magnetic Properties of FeSiBAlNi(C, Ce) High Entropy AlloysGlass Formation and Thermal Stability of Mechanically Alloyed Al75Ni10Ti10Zr5 Amorphous Composites with Graphene AdditionEffect of Mn Contents on the Phase Transition of the High Entropy Alloy Prepared by Laser CladdingInfluence of Annealing Treatment on Microstructure and Mechanical Properties of Fe-Cu-Si-Al Amorphous CompositesMicrostructure and Mechanical Properties of a New Refractory HfNbSi0.5TiVZr High Entropy AlloyCorrelation between Electrical Resistivity and the Structural Evolution of Zr-Based Bulk Amorphous AlloysCore Losses Separation of Amorphous Alloy CoreResearch on Laser Brazing Applying Al-Based Amorphous RibbonLiquid Phase Separation and Dual Glassy Structure Formation of Designed Zr-Ce-Co-Cu AlloysTension-Compression Asymmetry in an Extruded Mg Alloy AZ31: Texture and Strain Rate EffectsEffects of Microstructures on the Tensile Properties and Corrosion Resistance of High-Purity MagnesiumMicrostructure and Corrosion Behavior of Hot Compressed AZ31B Magnesium Alloy JointCompressive Behavior at Ambient Temperature of ZK60-xDy Magnesium AlloysEffects of Filtration Purification and Solution Treatment on the Microstructure and Mechanical Property of AZ91D AlloyEvolution of Microstructure and Mechanical Properties of ZK80 Mg Alloy during Net-Shape Pressing of Extruded PerformMicrostructures and Tensile Properties of Mg-6Gd-3Y-1.4Zn-0.4Zr AlloysInfluence of a Trace Alloying of Ag on the Ageing Behavior and Mechanical Properties of AZ80M Magnesium AlloysMicrostructural Evolution of a Fine-Grained Mg-Y-Nd Alloy during Superplastic DeformationEffects of Briquette Forming Condition on the Extraction of Magnesium from Calcined Magnesite via Vacuum Aluminothermic ReductionEffect of Heat Treatment on Microstructures and Properties of AZ40M AlloyDynamic Recrystallization Behavior of Mg-Gd-Y-Zr Alloy during Hot CompressionMechanical Behavior and Microstructure Evolution of Mg-Gd-Y-Zn-Zr Alloy during Multipass Hot Compression DeformationEffect of Solution Treatment on Corrosion Resistance of the Biodegradable NZ20K AlloyPreparation and Characterization of As-Cast and As-Extruded Mg-1Mn-0.6Ce-3Y AlloyLow Temperature Co-Fired ZnNb2O6 Dielectric Ceramic Doped by B2O3Stress Induced Martensitic Transformation in Ti-1023 AlloysEffect of ? Annealing and near ? Zone Hot Deformation on the Microstructure and Texture of TC18 AlloyThermal Stability and Mechanical Properties of Ti-15-3 Titanium AlloyMicrostructural Development around Crater in Commercial Pure TitaniumCellular Automata Simulation on Dynamic Recrystallization of TA16 Alloy during Hot DeformationMicrostructural Evolution during Forging of Ti-6Al-4V AlloyEffect of Alpha Phase Characteristics on the High Cycle Fatigue Properties of Ti-6Al-4V AlloyDeformation Behavior of Ti-6Al-4V-0.1B Alloy Loaded under High Strain RatesEffect of Hot Forging Strain Rate on the Microstructure and Mechanical Properties of TC4-DT Titanium AlloyDynamic Compression Properties of Low-Cost Ti-6Al-4V PlatesEffects of Stress-Relief Annealing on the Residual Stress and the Microstructure of TA15 Welded JointMicrostructure and Tensile Properties of Boron-Doped Beta Titanium AlloyMicrostructure and Mechanical Properties of TiNiFe Shape Memory Alloys with Different CompositionsInfluence of Shot Peening on the Surface Hardness of TC11 Titanium Alloy after High Cycle Fatigue TestCharacterization of Hot Deformation Behavior of Ti-4.5Al-3V-2Mo-2Fe Titanium AlloyInfluence of Upsetting and Drawing Times on the Microstructure and Microtexture of TC4 Titanium AlloyMicrostructure and Mechanical Properties of Powder Metallurgy Ti-22Al-24Nb-0.5Mo Alloys Joints with Electron Beam WeldingInfluence of Cooling Rate on Phase Transformation of a a+? Titanium AlloyHot Compressive Deformation Behavior of TC4-DT Titanium AlloyInfluence of Electric Pulse Heat Treatment on the Dynamic Mechanical Behavior of TC6 Titanium AlloyStudy on Rotating Bending Fatigue Property of Ti65 Titanium AlloyLow Cycle Fatigue Behavior of TA29 Titanium Alloy at Different TemperaturesPrediction of High Cycle Fatigue Property of Ti-6Al-4V Alloy Using Artificial Neural NetworkEffects of Aging Temperature on the Microstructure and Mechanical Properties of a Ti2AlNb Based AlloyEffects of Cold-Rolling Reduction on Microstructure and Mechanical Properties of Ti50Zr30Nb10Ta10 AlloyWetting Behavior and Interface Characteristic of Ti32.8Zr30.2Ni5.3Cu9Be22.7/Ti6Al4VInvestigation of Interface in SiC Fiber Reinforced TC17 Titanium Alloy Matrix CompositesFabrication and Strengthening Mechanisms of Al/WC Particles Composite Prepared by Accumulative Roll BondingMicrostructural Difference between Unreinforced Canning of TC17 Alloy and the Matrix in SiCf/TC17 Composite Fabricated by HIP ProcessHot Deformation Behavior and Processing Map of 25%SiCp/2009A1 CompositeInfluence of HA and Environmental Factors to the Damping Performance of HA/Mg-3Zn-0.5Zr CompositesEnhanced Tensile Properties of Graphene-Al5083 Composite Prepared by Hot Pressing and Hot ExtrusionHot Deformation Behaviors and Microstructure Evolution of SiCp/Al CompositesInvestigation of the Effect of Argon Arc Welding Parameters on Properties of Thin Plate of In Situ Titanium Matrix CompositesAmbient-Temperature and High-Temperature Tensile Properties of Investment Casted Titanium Matrix Composites with B4C AdditionsStructures and Properties of Welding Seams in Nickel-Base SuperalloysHot-Gas Corrosion Resistance of DD9 Single Crystal SuperalloyStress Rupture Properties and Fracture Behavior of DD6 Single Crystal SuperalloyEffect of Degree of Order on Hydrogen Diffusion in (Fe,Ni)3V AlloysEffect of Long-Term Aging on the Evolution of ?' and TCP Phases of a Ni3Al Based Single Crystal SuperalloyPartition Behavior of Ni between ? and ?' Phases in the New Type Co-Based SuperalloysThe Effect of Remelting on the Microstructure and Mechanical Properties of a Nickel SuperalloyEffect of Carbon on the Microstructural Evolution and Thermal Fatigue Behavior of a Ni-Base SuperalloyEffects of Alloying Elements on the Properties of Ni-Mo-Cr Superalloys with Low Thermal ExpansionStudies on Microstructure and Properties by Mass Smelting for Directionally Solidified SuperalloyResearch on Effect of Alloy Elements on Equilibrium and Properties of Ni-Cr-Co Type Nickel-Based SuperalloyInfluence of Carbides on Stress Rupture Property of a Ni-Base SuperalloyDecreasing Defects of Center Porosity and Improving Secondary Pipe Castings for Superalloy Ingots by Dynamics MethodsThe Microstructure and Mechanical Properties of Heat Treated NiCr20TiAl SuperalloyEffect of Sulfur on the Hot Plasticity of GH625 SuperalloyEffect of Al on the Microstructure and Mechanical Properties of HK40 Heat-Resistant Steel at High TemperatureEffect of Microcast-X Fine Grain Casting on the Microstructure and Mechanical Properties of K492M Alloy at 760?CRole of Cobalt in the Microstructural Stability of Single Crystal SuperalloysInfluence of Metallographic Etchant on ?? Precipitates Characterization in a Single Crystal Nickel-Base SuperalloyInfluence of Heat Treatment on the Microstructures and Mechanical Properties of K465 SuperalloyMicrostructure and Properties of W-Cu Composites Fabricated by Laser Cladding FormingMicrostructure, Mechanical and Tribological Properties of the Rapidly Solidified NiAl/Cr(Mo,Dy) Hypoeutectic AlloyMicrostructure of Chemical Vapor Transport Deposition Single Crystal Tungsten Coating Working at 1600?CEffect of Trace Strontium Addition on Microstructure and Room Temperature Fracture Toughness of Nb-12Si-22Ti AlloysMicrostructure and Room Temperature Mechanical Properties of a New Corrosion-Resistant Alloy GH945 for Oil and Gas ApplicationsPhase Diagram and Phase Equilibrium Studies on Ultra High Temperature Alloys of Nb-Si-TiLaser Brazing Research on Carbon Steel and Stainless Steel Applying Fe-Based Amorphous CoatingEffect of Mo Content on the Corrosion Resistance of Fe-Based Amorphous Composite CoatingMicrostructure and Properties of Fe-Based Amorphous Composite Coating Prepared by Pulse LaserStudy on the Corrosion Behavior In Vitro and Mechanical Properties of the FHA Coated Mg-Zn-Zr AlloyStructure and Properties of W-Ti Thin Films Deposited by Magnetron SputteringPreparation and Properties of HfO2-Y2O3 Composite Coating on the Surface of Iridium CoatingMicrostructure on Laser In Situ Deposit of TiBx/TiC ReinforcedComposite CoatingsWear and Corrosion Properties of Crystalline Ni-W Alloy Coatings Prepared by ElectrodepositionMicrostructure and Properties of Fe Base Coatings Reinforced by In Situ TiC Particles Using Plasma Jet Surface MetallurgyInfluence of Impact Damage on the Thermal Stress Distribution within the EB-PVD Thermal Barrier CoatingsEffect of the Porosity on Thermal Stress within TBCs Using Finite Element MethodWC Particles Reinforced Co-Based Alloy Coatings Produced by Laser Cladding
In Situ Synthesis and Oxidation Behavior of Ti-Al-Ag Ternary CoatingsInfluence of Ti on the Microstructure and Performance of Fe-Cr Alloy Cladding LayerModulation of Tribological Performance of Copper by Chemical Modification with H2O2/HCl MixtureSolar Reflection Characteristics of Phthalocyanine Green/TiO2 Composite Green Pigments Prepared via Different ApproachesSiO2 Cryogel Dispersion in Organic Solvent for the Application as Transparent Heat Insulation Coating on PETTop-Down Fabrication of Superhydrophilic Graphene Oxide NanosheetsFine-Grained W-Ni-Fe Heavy Alloys Prepared by Spark Plasma SinteringPrediction of Ring Rolling Process of PM Ti2AlNb Alloy by Hot Isostatic Pressing Based on Gleeble-3800 and FE SimulationPreparation and Welding Performance of Ti?6Al?4V Powder Compact Fabricated by Hot Isostatic PressingIsothermal a Precipitation and Evolution in a Hot-Rolled near ? Titanium AlloyPreparation and Properties of Aluminum Boron CompositeThe Influence of Cylindrical Grinding Medium on Particle Size and Mechanical Properties of TiC Steel Bonded CarbideSolidification Characterization of K418 Alloy Powders Fabricated by Argon Gas AtomizationEffects of Combined Addition of Cr3C2 and NbC on Microstructure and Properties of Cemented Carbides Prepared by W?-Co Composite PowderMeso-Structure Design of B4C-Al/Al Composites by Hot PressingPreparation and Magnetic Properties of Nanocrystalline FeSiAl Powder Produced with Strip Cast Ingot ProcessFlow and Densification Behaviors of Sintered P/F-10C50 Steel under Hot CompressionFabrication of Zn Alloy Foam via Powder Metallurgical ApproachFabrication of W-Cu/Lu2O3 Composites with High Strength and Electrical Conductivity Prepared by Electroless Plating and Powder MetallurgyThe Microstructures and Properties of Carbon and Graphite Materials Prepared from Mesocarbon Microbeads by Different Molding MethodsInterface and Damping Capacity of Mg/Al Multilayered Composite Produced by Accumulative Roll BondingEffect of High Energy Ball Milling on Structures and Properties of Atomization Fe-Based Nanocrystalline Soft Magnetic PowdersEffects of Paste Composition and Sintering Process on Performance of Silver Paste for Silicon Solar CellsStructure and Inverse Magnetocaloric Effect of Mn1.2Co0.8Si0.2P0.8 Compound Prepared by SPSEffect of Ti Element on the Mechanical Properties of Cu-Matrix Bonding Diamond Tool Bits

Über Autor(innen)

Eds. Yafang Han, Ying Wu, Guangxian Li, Fusheng Pan, Runhua Fan, Xuefeng Liu