Buch, Englisch, Format (B × H): 170 mm x 240 mm, Gewicht: 3400 g
ISBN: 978-3-03785-053-4
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Committees
1. FORMING PROCESSES
A New Rigid Plastic Messless Method for Simulation of Bulk Metal Forming Processes
Scanning Path Planning in Laser Bending of Tube Based on Curvature
Investigation on Earing Behavior of AA 2024-T4 and AA 5754-O Aluminum Alloys
Numerical and Experimental Research on the Flexible Forming of Metal Sheet Using Magnetic-Driving Plasma Arc
Numerical Study of the Flow Forming Process of AISI 630 Stainless Steel
Finite Element Analysis and Die Design of Extrusion Processes of Radial-Finned Heat Sink
Simulation and Fabrication of Automobile Parts in Semi-Solid Process
The Effects of Cooling Slope Casting and Isothermal Treatment on Wear Behavior of A380 Alloy
Mechanical Characterization Behavior of Boron Steel Sheet in Hot Press Forming Process with Cooling System
Study on the Formability of Magnesium Alloy for Bearing Cover with Inner Cavity under Hot Forging
Mathematical Modeling of Flow Behaviour of API-X70 during Hot Torsion Testing
Microstructural Evolution of AZ91 Magnesium Alloy during Deformation and Heat Treatment
Lateral Extrusion of Gear-Like Components with Radial Tooth Profile: Metal Flow Simulation and Analysis
Development of a Novel Rapid Manufacturing Process for Micro-Cylindrical Lens Array
Experimental Investigation on the Instability of Al Sheet in Hydraulic Bulging Based on ESPI
Effect of Hot Rolling Deformation on Superplastic Deformation Behavior of TiNP/2014Al Composite
FE Simulation and Experimental Study of Tube Hydroforming Process for AA1050 Alloy at Various Temperatures
Numerical and Experimental Study of Two-Layered Tube Forming by Hydroforming Process
Size Effect on Micro Tensile Test of Copper
Optimisation of Cruciform Test Specimen for Biaxial Tensile Testing of Sheet Metal
Innovative Tools and Tool Steels for the Blanking of Press-Hardened Ultra High-Strength Manganese-Boron Steels
Rheological Characterization of Water Atomised Stainless Steel SS316L for Micro MIM
Optimization of Micro Metal Injection Molding SS 316L for the Highest Green Strength by Using Taguchi Method
Influence of Hot Extrusion Process on the Mechanical Behavior of AA6061/SIC Composites
An Evaluation on Processing of Metal Matrix Composites (Al2O3/AC8A) by Low-Pressure Infiltration
Dynamic Model of Compaction Process of Metallic Powders
Some Aspects of Deposition Parameters of RF Sputtered Ferromagnetic Film Germane to the Study of Magnetoresistive Sensing Devices
An Elasto-Plastic Finite Element Analysis of the Radial Compression of Aluminium Tube between Rigid Plates
Limit Analysis of Lateral Extrusion of Gear-Like Components with Radial Tooth Profile
Axial Crushing of Grooved Thin-Walled Tubes Using Experiments and Finite Element Simulation
Microstructure and Mechanical Properties of Twist Extruded Pure Aluminum Processed by Post-Rolling
Investigations about the Single Point Incremental Forming of Anisotropic Titanium Alloy Sheets
A 3-D Forming Prediction Method of Increase of Sheet Thickness during Drawing Process
Improvement of Local Decrease in Material Thickness of Fuel Supply Pipe
Effect of Addendum Parameters to the Formability of Aluminum AL 6303
2. CASTING, JOINING AND RELATED PROCESSES
Sn-Rich Phase Coarsening in Sn-Ag-Cu Solder Joint during Moderate Current Stressing
Temperature Distribution of Aluminum Alloys under Friction Stir Welding
Effects of Operational Parameters and Heat Treatments on the Aluminum-Steel Explosively Welded Composite Plates
Investigation of Joint Groove Geometry Effect on the Residual Stresses in Circumferentially Butt-Welded Steel Pipes by the FEM Simulation
A Comparison between Isothermal and Coupled Thermo-Mechanical FE Analyses of the Ring Rolling Process
The Effect of Cooling Rate on Mechanical Properties of 22MnB5 Steel Sheet during Hot Press Forming
Debinding Process of a Starch-Based Binder in Metal Injection Moulding
Numerical Simulation of Welding Sequence Effect on Temperature Distribution, Residual Stresses and Distortions of T-Joint Fillet Welds
Research on Multi-Steps Tube-Compression of Thin-Wall Parts with Variable Diameter by Viscous Pressure Forming
Effect of Mould Runner and Coating on Graphite Nodule Characteristics and Hardness of Thin Wall Ductile Iron
Formation of Globular Microstructure in A380 Aluminum Alloy by Cooling Slope Casting
Aluminium Metal Matrix Composite: Improving Wear Performance through Treatment
Grain Growth Evaluation in HAZ of Welded Pipes Using Dimensionless Parameters and Optimum Pre-Exponential Constant for Seam Weld and Seamless Pipes
Orthogonal Array Technique for Optimizing the Sintering Parameter of the Metal Injection Molding (MIM) Compact: Best Flexure Strength
Effect of Pouring Temperature and Melt Treatment on Microstructure of Lost Foam Casting of AL-Si LM6 Alloy
Quantitative Stereology for Roughness Morphology of Aluminum Alloy
Effect of Deformation Temperature on Deformation Behavior and Service Performance of 7050 Aluminum Alloy
Mathematical Modeling of Turbulent Fluid Flow and Mass Transfer in a Steel Continuous Casting Tundish
On the Dependence of Microstructure-Sensitive Properties of Cast 2xxx Series Aluminium Alloy on Solidification Parameters
Design and Simulation on Cast Metal Matrix Composite by Investment Casting
Analysis of Temperature Distribution on Warm Forming of Aluminum-Magnesium Alloy
An Investigation of Mechanical Non-Sinusoidal Oscillation of Continuous Casting Mold
A Novel Scheme for Weld Microstructure Control Using Cryogenic Cooling
Residual Stress; the Effect of Pouring Temperature and Chemical Composition
Effects of Cooling Condition on Hot Tearing during Investment Casting
Influence of Process Parameters on Welding Quality during Lap Welding of Aluminum Sheets Using High Brightness Disk Laser
On-Line Empirical Models for Control of Bead Geometry in Robotic Arc Welding Process
A Study on Magnetostrictive Sensor for Detecting the Weld Defects
A Study on Cooling Characteristics of AC4C and AC7A Casting Material for Manufacturing Tire Mold
Investigation on Joint Strength of Dissimilar Resistance Spot Welds of Aluminum Alloy and Low Carbon Steel
Effect of Energy Input on Microstructure and Hardness of TIG Welded AISI 430-Ferritic Stainless Steel
Effect of Work Piece Dimensions on Cost Effective Hybrid Rapid Casting Solution for Aluminium Alloy
Design and Simulation on Compressor Metal Matrix Composite by Investment Casting
The Effect of Heat Treatment Parameters on Microstructure and Toughness of Austempered Ductile Iron (ADI)
The Effects of Isothermal Temperature on the Microstructure of Semisolid A6070 Alloy Produced by SIMA Process
Laser Gas Assisted Nitriding and TiN Coating of Ti-6Al-4V Alloy
Structural Integrity of Spot-Welds Used for Auto-Body Fabrication
An Investigation on Warpage Analysis in Plastic Injection Moulding
Research on Crack Healing in Slab during Hot Rolling
3. MATERIALS
Effect of Span Length on the Tensile Properties of Natural Fibers
Impact Strength of Carbon Reinforced Epoxy Composite at Different Temperatures
Influence of Moisture Absorption on Impact Strength and Failure Behavior of Hybrid Jute-Carbon/ Epoxy Composite
Studies on the Effects of the Potential Sweep Rates and pH on the Corrosion Rate of Polyaniline Coated Steel
Preparation of Epoxy-Kenaf Nanocomposite Based on Montmorillonite
Weldability and Toughness Evaluation of Ceramic Reinforced Steel Matrix Composites (TiB2-RSMC)
A FEM Based Numerical-Experimental Study for Determining Strength Properties by Micro Indentation of a Metal Matrix Composite
Numerical Study of Cracked Titanium Shell under Compression
Preparation and Microstructure of Nanocomposite Mg-3Al-Zn Alloy by HDDR Combined with Ball Milling
Influence of Heat Treatment on Properties of Hot Isostatically Pressed Turbine Blade Superalloy IN738
The Effect of Incorporating Lithium Fluoride on the Compressive Strength and Diametric Tensile Strength of Glass Ionomer Cement
Influences and Properties of Various Activated Carbon and Carbon Black Filled in Epoxy Composite
Sm-Doped NiFe Thin Films: Structural and Magnetic Characterization
Microstructural and Magnetic Studies on Calcined Ni-Zn Ferrite Powders Prepared by Chemical Co-Precipitation Method
Synthesis and Characterization of TTAB Coated Silver (Ag) Nanoparticles
Growth of Carbon Nanomaterials on Granular Activated Carbon
Effects of Material Properties and Thickness of Die Attach on Warpage and Stresses of TSOP
Development of Vibration Suppression Devices from Smart Fluids
An Influence of a Binder System to the Rheological Behavior of the SS316L Metal Injection Molding (MIM) Feedstock
Electrical Properties of Carbon Nanotubes-Based Epoxy Nanocomposites for High Electrical Conductive Plate
Effects of Type and Concentration of Initiator on Grafting of Acrylic Monomer onto Depolymerized Natural Rubber
Evaluation of Compressive Strength of Eggshell Hydroxyapatite
Compressive Strength of Rice Husk Filled Resin
Electronic and Positron Properties of Zinc-Blende MgTe, CdTe and their Alloy Mg1-XCdXTe
Characterisation of Titanium Alloy Feedstock for Metal Injection Moulding Using Palm Stearin Binder System
Recovery of Zinc from the Final Slag of Steel's Galvanizing Process
Developing of Honeycomb Shaped Cordierite Ceramic from Indigenous Raw Materials and its Characterization
Crack Arrest Model for Transversely Cracked Piezoceramic Strip under Mechanical and Electrical Yielding
Determination of Uniaxial Flow Stress Curve Using Aero-Bulge Test for Very Thin Copper Sheet
Effect of Aluminum Nitride Addition on Dry Wear Properties of Al-11%Si Alloy Prepared by Stir Casting Process
Thermal Investigation of Aluminium – 11.8% Silicon (LM6) Reinforced SiO2-Particles
Effect of AlCl3 Addition in Processing of TiAl-Al2O3 Nano-Composite via Mechanical Alloying
Effects of Polymer Loading on Tropical Wood Polymer Composite (WPC)
The Effects of Material Thickness and Deformation Speed on Springback Behavior of DP600 Steel
Influence of Filler Types on Mechanical Properties and Cure Characteristics of Natural Rubber Composites
Effect of Flame Retardant on Flame Retardancy and Mechanical Properties of Glass Fiber/Polypropylene Composites
FEA Based Fatigue Life Estimation of Automotive Component Correlated with Fatigue Data Editing Technique
Coefficient of Thermal Expansion Measurement of Metal Matrix Composites by Thermo Mechanical Analyser
Specific Heat Capacity Measurement of Al / SiCp Composites by Differential Scanning Calorimeter
Evaluation of Mechanical Properties and Various Pile-Up of Plate-Type Polymer Using Nanoindenter
A Study on Delay Effect of Fatigue Life by Laser Welding Using Shot-Peening
Impact Properties of Natural Fiber Hybrid Reinforced Epoxy Composites
Finite Element Analysis and Comparison of Castellated and Cellular Beam
Two-Dimensional Stresses in a Hollow FG Sphere with Heat Source
Fatigue Behavior and Damage Mechanism of a Cast Aluminum Alloy in Very High Cycle Regime
Ultra-Violet Radiationcured Composites Based on Unsaturated Polyester Resin Filled with MMT and Kenaf Bast Fiber
Evaluation of Friction Welded Bi-Material Joint Strength Subjected to Impact Loads
Controlled Potential Electrodeposition and Characterization of ZnTe Thin Films on Indium Tin Oxides
Structure Characterization of Electrodeposited Zinc Selenide Thin Films
Effects of High Energy Radiation on Mechanical Properties of PP/EPDM Nanocomposite
Compatibilized PP/EPDM-Kenaf Fibre Composite Using Melt Blending Method
Fabrication of CuSiC Composite by Powder Metallurgy Route
Microstructure and Electrical Properties of AZO Films Prepared by RF Magnetron Sputtering
Egg Yolk as Pore Creating Agent to Produce Porous Tri-Calcium Phosphate for Bone Implant Application
The Effects of High Energy Radiation on the Tensile Properties of Rubber Toughened Nanocomposites
Mould Filling and Pressure Distribution for Polymer Resins
Material Properties and Design Aspects of Folding Bicycle Frame
Effects of Titanium Combined with Aluminium on the Electrochemical Properties and Efficiency of Mg-Mn Anodes
Effects of Strontium and Calcium on the Microstructure and Grain Size of Cast AZ91 Magnesium Alloy
Nano Crystalline La Substituted Barium Hexaferrite Synthesized by Coprecipitation Method
Phase Formation during Reduction of Iron Sand with Soda Ash Flux Addition
Reduction of Sintering Temperature of Porous Tungsten Skeleton Used for Production of W-Cu Composites by Ultra High Compaction Pressure of Tungsten Powder
Failure Prediction in Drawing Processes of Mg Alloy Sheet by the FEM and Ductile Fracture Criterion
Mechanical Properties and Decay Resistance of Wood Polymer Composites (WPC)
Influence of Cutting Parameters on Machinable Glass Ceramic Processed by End Milling
Experimental Investigation of Machining Parameters on Surface Roughness in Dry and Wet Wire-Electrical Discharge Machining
Temperature Effects on the Preparation of Multi-Walled Carbon Nanotubes by Floating Catalytic Chemical Vapor Deposition
Effects of Synthesis Parameters on the Preparation of Carbon Nanofibers by Ethanol Catalytic Combustion
Functionalized Conjugated Polymer/ZnO Nanocomposite: Synthesis and Characterization
Cold Deposition of Zinc Sulfide Optical Waveguides Using Thermoelectric Device
Determination of the Constants of Zerilli-Armstrong Constitutive Relation Using Genetic Algorithm
Characterizing Chicken Eggshell Reinforced Polypropylene (PP)
Mechanical Properties Modification of Polyethylene (PE) for CaCO3 Particulated Composites
Machinability Improvement by Workpiece Preheating during End Milling AISI H13 Hardened Steel
4. MATERIALS REMOVAL PROCESSSES
Machinability Improvement by Workpiece Preheating during End Milling AISI H13 Hardened Steel
Performance Evaluation of PCBN in End Milling of AISI D2 Hardened Steel under Room and Preheated Machining Conditions
Multi-Criteria Optimization in End Milling of AISI D2 Hardened Steel Using Coated Carbide Inserts
Application of Ductile Fracture Criteria to Industrial Cutting Processes
Principal Methods of Experimental Design and Statistical Analysis Used in Experimental Studies of Machining Processes
Small Hole EDM by Current Dividing Based on Discharging Area
Analysis of the Machinability of Aluminium Alloys UNS A97050-T7 and UNS A92024-T3 during Short Dry Turning Tests
Analysis of the Vitrified CBN Wheels for the Performance of Grinding Hardened Steel
Prediction of Recycle Method Using Relevance Vector Machine
Pattern Recognition Method to Predict Recycling Strategy for Electronic Equipments
Current Research Trends on Dry, Near-Dry and Powder Mixed Electrical Discharge Machining
Performance of Nitrogen Gas as a Coolant in Machining of Titanium
Study of Surface Roughness of Pieces of Magnesium UNS M11311 Obtained by Dry Turning Using ANOVA
Tensile and Dynamic Mechanical Behavior of Thermoplastic Natural Rubber (TPNR) Nanocomposites Treated with Ultrasonic
Optimization of Process Parameters on EDM Milling of Stainless Steel AISI 304
Pareto Optimization of Electro Discharge Machining of Titanium Nitride-Aluminium Oxide Composite Material Using Genetic Algorithm
Sensing Tool Breakage in Face Milling by Support Vector Machine
Optimization of Precision Grinding Parameters of Silicon for Surface Roughness Based on Taguchi Method
New Approach in Cost Structuring of High Speed Hard Turning
Tool Life in High Speed Turning with Negative Rake Angle
Effect of Process Parameters on Abrasive Contamination during Water Abrasive Jet Machining of Mild Steel
Experimental and FEM Study of Serrated Chip Formation in High Speed Turning Processes
Chemical Wet Etching of Silicon Wafers from a Mixture of Concentrated Acids
Application of FEM in Investigating Machining Performance
Numerical, Analytical and Experimental Study of Structural Properties of Cutting Tool in Endmilling Process
Surface Integrity of AISI H13 in End Milling and Electrical Discharge Machining Process
Evaluation of PVD-Inserts Performance and Surface Integrity when Turning Ti-6Al-4V ELI under Dry Machining
Study of Micro-EDM of Tungsten Carbide with Workpiece Vibration
Chip Formation and Cutting Performance Investigation on Titanium Alloy Machining
Investigation on the Surface Finish, MRR and the Surface Damage during the EDM of Tungsten Carbide
Analysis of Diametrical Error of Machined Workpieces in Ultrasonic Vibration Assisted Turning
Cutting Force Analysis of on-Machine Fabricated PCD Tool during Glass Micro-Grinding
The Predictive Model of Surface Integrity in End-Mill Grinding for High-Speed Milling
Flank Wear Modeling in High Speed Hard Turning by Using Artificial Neural Network and Regression Analysis
Machining Time Simulation in High Speed Hard Turning
The Condition Monitoring of the Micro V-Grooving with a Single Crystal Diamond Tool Using the AE Technology
Effects of Process Parameters on Surface Finish in Cylindrical Grinding
Vibration in Traverse Cut Cylindrical Grinding - Experiments and Analysis
Experimental Investigation during Finishing of Al/SiC-MMC's by Abrasive Flow Machining (AFM) Process
Performance of CBN and PCBN Tools on the Machining of Hard AISI 440C Martensitic Stainless Steel
Polishing Force Modification near the Boundary of a Part Surface
Improvement of Surface Roughness in End Milling of Ti6Al4V by Coupling RSM with Genetic Algorithm
Statistical Approach for the Development of Tangential Cutting Force Model in End Milling of Ti6Al4V
Surface Roughness Prediction in High Speed Flat End Milling of Ti-6Al- 4V and Optimization by Desirability Function of RSM
Chip Serration Frequency - The Primary Cause of Chatter during End Milling Operation
Influence of Electrode Cooling on Recast Layers and Micro Crack in EDM of Titanium
Investigation of the Machinability of Inconel 718 in Room Temperature and Preheated Conditions
Prediction of Surface Roughness in High Speed Machining of Inconel 718
Influence of Electrode Cooling on Material Migration among the Electrodes during EDM of Titanium Alloy
Influence of Electrode Profiles on Electrical Discharge Machining of Titanium
The Effect of Tool Edge Geometry on Tool Performance and Surface Integrity in Turning Ti-6Al-4V Alloys
5. HIGH ENERGY BEAM REMOVAL PROCESS
A Study of Jet Characteristics of Plasma Arc under Transverse Alternating Magnetic Field
Influence of Feed Rate on Surface Integrity of Titanium Alloy in High Speed Milling
Hydrophobic Templates with Rough Patterns Fabricated by Laser Micromachining for Liquid Droplets Generation
A Programmable System for Treatment of Alloy Steels at Cryogenic Temperatures
Multi-Sphere Mirror Design of YAG Laser Applied for Glass Substrate Cutting
A Study on Thermal Fracture Processing Models Applied to Glass Substrate Cutting
The Effect of Scan Speed on Engraving Depth and Surface Roughness of AISI H13 Tool Steel
Surface Roughness and Wear Behavior of Laser Machined AISI H13 Tool Steel
CO2 Laser - MIG Hybrid Welding of Titanium Alloy
Experimental Investigation on Fiber Laser Cutting of Ti6Al4V Thin Sheet
Laser Surface Melting of Austenitic Cr-Ni Stainless Steel
6. PRECESSION ENGINEERING AND NANO-TECHNOLOGY
Development of an Intelligent Auto-Turning Controller for Precision Machining
Effects of Post Weld Ageing Heat Treatments on the Microstructure of 17-4PH GTA Welded Joints
Etching Rate of Machinable Glass Ceramic
Measuring the Changes in InP Morphological and Electrical Specifications Caused by Oxygen Ion Implantation
Experimental Investigation into Pulsed Nd:YAG Laser Micro-Turning of Engineering Ceramics
Effect of Electron Beam Bombarding of the Catalyst Layer on the Growth of Carbon Nanostructures by TCVD Method
Effect of Synthesis Temperature on Phase and Morphological Characteristics of Hydroxyapatite Nanoparticles
Frequency Pulse Period and Duty Factor Effects on Electrochemical Micromachining (EMM)
The Effect of Microstructure on the Photocatalytic Properties of TiO2
Investigation of Microholes Produced by Focused Ion Beam Micromachining
Fabrication of Silicon Nanopillar Sheet for Cell Culture Dish
Two Dimensional Quasi-Steady Molecular Statics Nanocutting Simulation for Cutting Copper Material with Point Defect
Mechanochemical Reduction of MoO3 Powder by Silicone to Synthesize Nanocrystalline MoSi2
Synthesis and Characterization of Nano Hydroxyapatite
A Process Investigation for Micro-EDM Fabrication of through Holes in Thin Copper Sheets
7. SURFACE ENGINEERING
Influence of Magnetic Field on Corrosion Resistance and Microstructure of Electrodeposited Ni Coatings
Morphology and Mass Changes with Magnetic Field during the Electrodeposition of Ni-Co
Tribological Study of TiN Nano Structured Films Deposited on Plasma Nitrided H11 Steel by Pulsed DC PACVD
Analysis of Microstructural Changes during Pulsed CO2 Laser Surface Processing of AISI 316L Stainless Steel
The High Temperature Fatigue Behavior of Inconel-738LC Material Deposited Thermal Barrier Coating
Formation of TiN Dispersed Composite Layer on Steel Surfaces by Titanium Powder Preplacement and TIG Surface Melting Processes
Effects of Processing Parameters on Microstructures and Properties of TIG Melted Surface Layer of Steel
Wear Behavior of Modified Surface Layer Produced by TIG Melting of Preplaced Ti Powder in Nitrogen Environment
Formation of Ti-Al-N Dispersed Layer on Steel Surface by TIG Melting in a Reactive Environment
Tribological Characteristics of CVD Nanocrystalline Diamond Film Grown by Bias Enhanced Nucleation Process
Prediction Laser Sealed Advanced Ceramic Coatings Dimensions by Using Finite Element Model and Computational Method
Study on the Effect of Nano and Micro MoS2 Powder in Micro-Electrical Discharge Machining
Particle Dynamics and Heat Transfer at Workpiece Surface in Heat Treatment Fluidised Beds
Electrodeposition of Tin Using Tin(II) Methanesulfonate from a Mixture of Ionic Liquid and Methane Sulfonic Acid
Characterization and Response Evaluation of Detonation-Gun Sprayed Alumina-Titania Ceramic Composite
Coating Produced by Deposition of Nanoparticles Blended Wires
HVOF Coating of Diamalloy 2002 and 4010 on Carbon Steel Sheets: Microstructure Examination
Preparation of Carbon Fibres for Aluminium Composites
Integral Approach and Numerical Improvement to Calculate Carbon Concentration Profiles in Carburising
Design and Manufacture of Vacuum Forming Moulds
TiO2 Foam: Characterization and Cell Adhesion
The Effect of Black Powder Composition on the Erosion of Compressor's Impeller in Gas Transmission Line
Oxidation and Corrosion Resistance of Nanocrystalline Copper Deposit Produced by Pulse Electrodeposition
Method, Technology and Equipment for in Depth Surface Hardening
Surface Modification of Polystyrene Beads by UV/Ozone Treatment
8. COMPUTER AIDED ENGINEERING
Effects of Powder Synthesis Method on the Sinterability of Hydroxyapatite
Optimization of Multipass Turning Parameters by Genetic Algorithm
Computer Aided Process Planning for Machining the Gears
Modeling, Analysis and Fatigue Life Prediction of Lower Suspension Arm
Feasibility Study of CAD and CAM Technology in Garments Industries of Bangladesh
3D Modelling and Analysis Flow of Air Conditioner Outdoor Fan for Cost Reduction
Numerical Simulation of Electromagnetic Stirring Effect on Flow Pattern of Metal Melt
Effect of Draw Bead Height on Wall Features in Rectangular Deep-Drawing Process Using Finite Element Method
Building a Simulation Model for Prediction of Temperature Distribution in Laser Sealing Processing of Advanced Ceramic Coatings
Comparative Study of the Strain Signal and the Edited Strain Signal
The Tredgold Method in Reverse Engineering to Check the Assembly of a Conical Spur Gear Using CAD
Finite Element Simulation of Nosing of Tubular Circular Metallic Tubes Using Parallel Computing
Thread Forming of a Micro Screw for Storage Devices Using Finite Element Analysis
Geometric Modeling and Multi-Axis NC Machining for Custom-Made Femoral Stem
Relation between Surface Roughness and Overlap Interval in Fused Deposition Modeling
Low Bit Rate Video Coding for Remote Desktop Operation of CNC Milling
Effect of Moulding Sand Properties on Cost Effective Hybrid Rapid Casting Solution for Zinc Alloy
Virtual Simulation and Remote Desktop Interface for CNC Milling Operation
Conceptual Design of Aluminium Metal Matrix Composite Brake Rotor System
Finite Element Analysis of Tubular Ovality in Oil Well
Application of Finite Element Method in Optimal Design of Flip-Chip Package
9. GREEN MANUFACTURING AND MANAGEMENT
A Quality Steps for a Sustainable Development: Case of Food Processing
Reverse Engineering of Motorcycle Chain
Determination of Arsenic (III) and Arsenic (V) Species by Preconcentration and Inductively Coupled Plasma Mass Spectrometry (ICP-MS) in Drinking Water Samples Analysis
Speciation of Mercury in Environmental Water Samples with Seasonal Change
Environmental Diagnostic for a Sustainable Development
A Fundamental Study of Vibration Assisted Machining
Reconfigurability Approach in Manufacture of Moulds and Dies
10. Others
A Material and Product Audit Method for Determining the Level of Quality
Application of Multi-Objective Genetic Algorithm (MOGA) for Design Optimization of Valve Timing at Various Engine Speeds
Fatigue Life Optimization of Steel by Thermomechanical Treatment with the Use of Physical Thermomechanical Simulator
Taguchi Method for the Determination of Optimised Sintering Parameters of Titanium Alloy Foams
Mechanical Assessment of Dissimilar Diffusion Joints of CP-Ti to Stainless Steel
Behavior of Mortarless Wall Subjected to In-Plane Combine Loading
Bistable Characteristics of Liquid Crystal Devices with Patterned Alignment Films
Resource Allocation, Batching and Dispatching in a Stochastic Flexible Job Shop
Thermodynamic and Kinetic Modelling Hydrogenation of Titanium Particles and Sheets
A Study on Cooling Characteristics of Thermoelectric Cooling System Using Thermoelectric Materials
Investigation on Constant and Variable Feed Speeds Effects in Ring Rolling Process Using 3D FEM
The Effect of Lithium on the Microstructure and Morphology of Fe-Rich Intermetallic Compounds in 360 Cast Alloy
Polishing Force Modification near the Boundary of a Part Surface
A Heuristic Solution of Multi-Item Single Level Capacitated Dynamic Lot-Sizing Problem with Setup Time
Statistical Wear Model for Adhesively Bonded Tools
Study on Machining Characteristic of Aeronautical Material under Orthogonal Dry Cutting
Finite Element Method for Predicting the Cohesive Strength of DLC Film on 316L Stainless Steel by Four Point Bend Test and Validation with Experimental Results
Effect of Nano Silica on the Sinterability of Hydroxyapatite Dense Bodies
Effects of Bismuth Oxide on the Properties of Calcium Phosphate Bioceramics
Synthesis of High Fracture Toughness of Hydroxyapatite Bioceramics
Sintering of Hydroxyapatite Ceramic Produced by Wet Chemical Method
Elucidating the Effects of Helical Passageways in Abrasive Flow Machining
Characterization of Globular Microstructure in NMS Processed Aluminum A356 Alloy: The Role of Casting Size
Effect of the SiC Content on the Tribological Properties of Hybrid Al/Gr/SiC Composites Processed by In Situ Powder Metallurgy (IPM) Method
Characteristic Study on Micro Aspheric Surface Using Diamond Tool Cutting
Erosive Wear of Glass Fiber and B2O3 Reinforced Epoxy Composites
Casting of Net Inserted Aluminum Alloy Composite Strip
Roll Casting of Al-40%Sn-1%Cu Alloy Strip
Strip Casting of 6061 and Recycled 6061 Alloy by an Unequal Diameter Twin Roll Caster
A Study on the Tensile Property of Jute Yarns Using Weibull Distribution
Effect of Alkali Treatment on Surface Morphology and Properties of Jute Yarns
Wear Characteristics of Fe-C-Si and Fe-C-Al Cast Irons
Study on the Microstructure and Properties of Fe-C-Si and Fe-C-Al Cast Irons
Al-4.5 Cu-3.8 Fe In Situ Composites: Effect of Rolling on Microstructure and Wear Properties
Laser Cutting of Thick Sheet Metal: Surface Plasma Characteristics and Cutting Quality Assessment
An Investigation on the Effect of Sonication Time and Dispersing Medium on the Mechanical Properties of MWCNT/Epoxy Nanocomposites
Response Surface Analysis of EDMED Surfaces of AISI D2 Steel
HVOF Coating of Inconel 625 Blended with WC: Fracture Toughness Measurement
Effects of Testing Temperature and Sliding Speed on the Wear Behavior of a Low Alloy Gas Nitrided Steel
