2-vols. Set
Buch, Englisch, 1360 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2700 g
ISBN: 978-0-87849-297-8
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Committees
Preface
Laser Milling of Al2O3 Ceramic Based on Deteriorative Layer Controlled
Pressure and Microstructural Change with Web to Flange Ratio and Die Land Length in Cold Extrusion of I-Shaped Lead Alloy
Effect of Severe Plastic Deformation on Mechanical Properties of Fe-Ni-Mn High Strength Steel
Development of a Starch-Based Binder in Metal Injection Molding
An Investigation on Continuous Steel Slabs Casting Line and Mechanical Design of a 3R Robot for Sampling from Melting Arc Furnaces
Production of Nano Leaded Brass Alloy by Oxide Materials
Wear Behavior of White Layer in Plasma Nitrided H13 Steel at Ambient and Elevated Temperatures
Milling of Carbon Fiber Reinforced Plastics
Preheating in End Milling of AISI D2 Hardened Steel with Coated Carbide Inserts
Investigation of the Formability of Flanged Parts of Magnesium Alloy under Hot Forging Process
Molding Analysis of Multi-Cavity Aspheric Lens and Mold Designing
Warm-Forming of Light-Weight Alloys under Multi-Stage Forming Process
Incremental Forming of Multislope Shaped Components
Friction and Bitten Condition in Cold Ring Rolling
Optimization of Short Stroke Control Curve in Hot Strip Mill by FEM Modelling
A New Punch Profile Design for Orbital Forging of a Bevel Gear Part
Influence of Forming Residual Stresses on the Welding Distortions of Two Thick Plates
Study of Forming Parameters in Hydroforming of a Thin-Walled ASTM C11000 Copper Tube
Near Net Shape Forging of CV Joint Outer Race
Simulation and Physical Modeling of Forging Sequence of Bj Type Outer Race
Numerical Simulation of Superalloy IN718 during Tube Hot Extrusion
Temperature Changes with Die Profile in Axisymmetric Forward Extrusion Process
Effect of Mold Surface Topography on Uneven Shell Growth in Solidification
Nonlinear Finite Element Modeling of Charpy Impact Test
Prediction of Tool Life and Experimental Investigation during Hot Milling of AISI H13 Tool Steel
Inverse Method Based on Modal Vibration Testing for Characterizing the Elastic Properties
Dynamic Simulation and Test Verification of PCB with BGA Chipset
A Study on Distributions of Electromagnetic Force of the Dissimilar Metal Joining in MPW Using a FEM
Numerical Simulation and Experimental Study on Corrugated Waist Rail with Universal Rolling
Modelling of Residual Stresses Induced by Turning of 316L
Post Welding Heat Treatment Simulation in Welded Stainless Steel Pipe and Comparison with Experiment
Heuristics for Direct Slicing of Point Clouds for Layered Manufacturing
Validation of the Method for Generation of Rheological Model to Characterize Non-Conventional Injection Molding by Means of Spiral Mold
A Methodology for Control of the Robotic Welding Process Using Infrared Sensors
Development of Scaffold Building Units and Assembly for Tissue Engineering Using Fused Deposition Modelling
Evaluation and Validation of the Shape Accuracy of FDM Fabricated Medical Models
Magnetostrictive Actuator Modeling and Placement
Anisotropic Elastic Distortions of a Buried Dissociated Hexagonal Network of Dislocations in a Nickel Based Super Alloys
Aspects of Wear Mechanisms of Carbide Tools when Machine Hastelloy C-22HS
Statistical Analysis of Hard Turning of AISI 4340 Steel on Surface Finish and Cutting Region Temperature
Modeling the Force, Surface Roughness and Cutting Temperature in Ultrasonic Vibration-Assisted Turning of Al7075
Prediction of Machining Force and Surface Roughness in Ultrasonic Vibration-Assisted Turning Using Neural Networks
Machinability of Bulk Metallic Glass Materials on Milling and Drilling
Three Dimensional Printing for Casting Applications: A State of Art Review and Future Perspectives
Analysis of Elliptical Cup Drawing Process of SUS304 Stainless Metal
ECAP Processing of High Si Bainitic Steel, Microstructure and Mechanical Properties
Rice Husk/High Density Polyethylene Bio-Composite: Effect of Rice Husk Filler Size and Composition on Injection Molding Processability with Respect to Impact Property
Evaluation of the AZ31 Formability According to Temperature Using a Constant Strain Rate Test
Experimental Investigations of Nd:YAG Laser Welding of 630 and 321 Stainless Steel and their Effects on Process Parameters
The Microstructural Study of Nd:YAG Pulsed Laser Beam Weld of Copper Beryllium Alloy
Strain Rate Sensitivity and Cavitation in Superplastic Deformation of a Commercial AL-5083 Alloy
Effect of Heat Treatment Conditions on the High Temperature Deformation of 6082-Al Alloy
Effect of Magnesium and Artificial Aging on the Microstructure and Mechanical Properties of Al-Si-Mn-Mg Alloys
Different Stress States Deformation of AA6082 Subjected to Different Artificially Aged Conditions
Characterization of the Corrosion Behavior of Hot Pressed Nanocomposites Al-SiC Powder
The Influence of Welding Parameters on Tensile Behavior of Friction Stir Welded Al 2024-T4 Joints
Microstructure and Mechanical Properties of Dissimilar Ferritic and Austenitic Steel Joints with an Intermediate Inconel-182 Buttering Layer
Crude Oil and Outdoor Temperature Effects on the Tensile and Creep Properties of Glass Fiber Reinforced Vinylester Composite Pipes
Optimization for Secondary Cooling Parameters in Continuous Casting of High Carbon Chromium Bearing Steel
Effect of Fiber Diameter Waviness and Wavelength Ratio on the Effective Tensile Elastic Modulus of Carbon Nanotube-Based Polymer Composites
Evaluation of the Role of Alloying Elements in Austemperability of Heavy Section Ductile Iron
Low Temperature Thermochemical Surface Treatment of Austenitic Stainless Steel for Improved Mechanical and Tribological
Effect of Residual Gradient Stress of Cantilever Plate Structure Deposited Metal Layers with Different Constraints on Deformation
Microstructural Investigation of Gamma-Irradiated Ultra High Molecular Weight Polyethylene in Nitrogen Atmosphere
Effect of Gamma Irradiation on the Microstructure and Morphology of Polyethylene Oxide and Polyvinyl Alcohol Blends
Characteristics of CFRP Structure of Bending Strength and Rigidity According to Stacking Orientation Angle
Effects of Simulated Pit Distribution Parameters on Tensile Properties of a Structural Steel Plate
Tribological Studies of Steels Using the Abrasive Wheel
Removal of Toxic Arsenic and Antimony from Groundwater Spiro Tunnel Bulkhead in Park City Utah Using Colloidal Iron Hydroxide: Comparison with Reverse Osmosis
The Applicability of GRP and NRP Composites in Rehabilitation of Unpressurized Pipes
Aluminum Recycling - Challenges and Opportunities
Failures of Chemical Injection Points in Upstream Facilities
A High Corrosion and Wear Resistant Interior Surface Coating for Use in Oilfield Applications
Metallurgical and Numerical Correlation of Mold Vibration with the Refinement of Al-Si Alloy
Quality Assessment and Metallurgical Examination of Laser Welded Sheets
Mixing of Multiphase Silicone for the Production of Breast Prostheses
ITO Thin-Film Removal Process Using Design of Rolling Tool
Determination of the Optimal Ball Grinding Parameters for the Bio-Ceramics ZrO2 on a PC-Based Multi-Axis CNC Engraving Machine
Investigations of Formation of Chatter in a Non-Wavy Surface during Thread Cutting and Turning Operations
Cutting Performance and Predictive Models for End Milling Aluminum Alloy
Predictive Modeling and Investigation on the Formation of Stiff Air-Layer around the Grinding Wheel
Constitutive Modelling of Mechanical Behaviour of a Ti-Alloy, Applicable in Metal Cutting
Reducing Electrode Wear Using Cryogenic Cooling during Electrical Discharge Machining
A New Cutting Force Model for Micro-Milling and Determination of Optimal Cutting Parameters
Characteristics of Surface Damage in Micro Electric Discharge Machining of Micro Holes
The CAM System for Scroll Profile with Three CNC Interpolations
An Investigation on Machining Power of EN-AC 48000 Aluminum Alloy Used in Automotive and Aerospace Industries
Evaluation of Thrust Forces in Dry Drilling of UNS A97050 Alloy
Surface Integrity and Residual Stresses Analysis by Strain Gages after Hard Turning Process of Case Hardened Steel AISI 8620
Parametric Approach Model for Determining Electrical Discharge Machining (EDM) Conditions: Effect of Cutting Parameters on the Surface Integrity
Prediction by Genetic Algorithm and Measurement by Center Hole Drilling of Residual Stresses of MAG Weldment
Performance Investigation for Precision Mold Turning by PCBN Tool
A Study of Machining Parameters during Electrical Discharge Machining of Steel by a Rotary Copper Electrode
The Effect of Reinforcement Phase on the Microstructure of Al-SiC Nanocomposite Powder Prepared via Mechanical Alloying
Applications of Nanocomposite Materials in the Oil and Gas Industry
Glass Ceramic Laser Machining for Cooktop Appliances
Design of Synchronous Processes of Rolling-Leveling and Ultrasonic Electrochemical Finishing of Holes
Prediction Modelling of Surface Roughness for Laser Beam Cutting on Acrylic Sheets
The Interaction between Particles and a Plasma Beam in the Thermal Projection Process
Gradation Process by Imbibition in WC-Co for Mining Tools Application
Laser Polishing Operation for Die and Moulds Finishing
Numerical Material Flow Optimization of a Multi-Hole Extrusion Process
Engineering Materials and Manufacturing Processes from Qur’anic Perspective
Characterization of Colmonoy 227-F Samples Obtained by Direct Laser Metal Deposition
Manufacturing of 18 Ni Marage 300 Steel Samples by Selective Laser Melting
On the Modeling of Laser as a Moving Distributed Volumetric Heat Source for Laser Cutting Simulation
Influence of Billet Quality on Hot Extrusion Die Life and its Relationship with Process Parameters
Experiments on Olive Husk-Addition to Masonry Clay Bricks on their Mechanical Properties, and their Application and Manufacturability as an Insulating Material
Joining of Polycarbonate Ring/Disk to Metal Sheet/Shaft and its Easy Disassembly
Structure Features of Martensite and Residual Austenite during Treatment with Concentrated Energy Fluxes
Structure and Properties of High-Chromium-Alloyed Upper-Eutectoid Steels after Hardening with Concentrated Energy Fluxes
Capacity Analysis for Fixed-Time Signalized Intersection for Non-Lane Based Traffic Condition
Design of Bone Scaffolds Structures for Rapid Prototyping with Increased Strength and Osteoconductivity
Evaluating PVC Degradation Using UV and Raman Spectroscopies
An Overview of Microfluidic Mixing Application
Effect of Milling Time on Crystallite Size and Morphology of Nickel Aluminde Based Composite Powder Prepared by Mechanical Assisted SHS Route
Rheological Investigation of Water Atomized Metal Injection Molding (MIM) Feedstock for Processibility Prediction
Experimental Study on the Heat Transfer in the Al Powder
Explosive Compaction of Metal Powder
Study the Re-Sticky Phenomenon of Powder Metallurgy Debris in the Electrical Discharge Machining
Improving the Deposition Rate of Multicomponent Coating by Controlling Substrate Table Rotation in a Magnetron Sputtering Process
Coating Performance in High Speed Micro Machining of H13 Tool Steel
Experimental Determination of Cutting Temperature and Force when Turning Assab Steel with Coated Carbide Inserts
Study of Ultrasonically Assisted Internal Grinding of Small Holes: Effect of Grain Size of cBN Grinding Wheel
Prediction and Investigation of Surface Response in High Speed End Milling of Ti-6Al-4V and Optimization by Genetic Algorithm
Measuring out of Flatness of a Rough Quartz Surface and Correction by Mist-Abrasion Machining
Development of Nitrided Layer during Nitriding of Steel
Microstructure and Wear Properties of Fe-Cr-C and Fe-Cr-Si-C Clads on Carbon Steel by TIG Surfacing Process
Development of Advanced Surface Engineering Technologies for the Benefit of Multipoint Cutting Tools
Investigation of Dry Plasma Etching of Silicon
A Study of Surface Integrity when Machining Refractory Titanium Alloys
Anisotropic Effect and the Crystals Nature on the Elastic Fields Dispersal Generated in a Three Layers Material
A Numerical and Experimental Study of Sheet Metal Bending by Pulsed Nd:Yag Laser with DOE Method
A New Die Design for Sheet Hydroforming of Complex Industrial Parts
Effects of Grain Size on Micro Backward Extrusion of Copper
Investigation on the Increasing Material Hardness on Fineblanked Sprocket
Theoretical, Numerical and Experimental Investigation of the Effects of Manufacturing Process Parameters on Thin-Walled Tube Bending Defects
An Analytical Model to Reduce Spring-Back in Incremental Sheet Metal Forming (ISMF) Process
Effects of Welding Positions on Mechanical Properties and Microstructure in Weld Metal of High Strength Steel
Proposal of a New Ultrasonic Welding Technique for Thermoplastic Polymer
Hydraulic Bulge Tests of Magnesium Tubes at Elevated Temperatures
Effect of Dwell Time on Friction Stir Spot Welded Dual Phase Steel
High Power Density Laser Build-Up Welding with CNC Precision
Investigation on the Formability of Tailor Welded Blanks with Curved Seams
Grain Refinement in Ferritic Stainless Steel Welds: The Journey so Far
Microstructural and Mechanical Characterization of Friction Stir Welded- 1050 Aluminium Alloy
Effects of Isothermal Aging on Tensile Properties and Fracture Behavior of 316L Austenitic Stainless Steel Weld Metal
Plasma from Electron Beam Evaporation of a Metal Target
The Influence of Welding Parameters on Tensile Behavior of Friction Stir Welded Al 2024-T4 Joints
Resistance Spot Welding of Unequal Thickness Low Carbon Steel Sheets
Effect of Temperature Field on Flexural Wave Characteristics of a Bar Resembling Welding to Rigid Body
Towards Tool Path Numerical Simulation in Modified Friction Stir Spot Welding Processes
Experimental Models for Assessment of Interfacial Heat Transfer in Dip Soldering
Interfacial Phenomena in Brazing of a Stainless Steel Face Sheet to a Honeycomb Core
Multiaxial Mechanical Strength of AA-2024-T3 Aluminium Alloy Sheets Joined by Friction Stir Welding Processes
Electric Current Pulse Welding of Titanium with 18-10 Stainless Steel
Residual Stress Correlation in Two Different Mitigation Techniques Using FEA
Characterization of Surface Defects Associated with Flash Butt-Welded Pearlitic Rails and their Contribution to Overload and Fatigue Failures
The Structure and Properties of Carburized and Hardened Vanadium Microalloyed Steels
Intensity of Diffraction of Laser Irradiating a Microparticle in Nanostructure Processing
Elevated Temperature Wear of Submicron Al2O3 Reinforced 6061 Aluminum Composite
EIS Study of Bulk Al-SiC Nanocomposite Prepared by Mechanical Alloying and the Hot Press Method
Development of an Expert Engineering Module for Determination of Ultrasonic Probe Position on the Weld Joint of Plate
