Selected, peer reviewed papers from the 2013 4th International Conference on Mechanical and Aerospace Engineering (ICMAE 2013), July 20-21, 2013, Moscow, Russia
Buch, Englisch, 740 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1400 g
ISBN: 978-3-03785-833-2
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Committees and Sponsors
Chapter 1: Aerodynamics and Aeronautic
Composite Wing Flutter Speed and Frequency due to Variable Control Surface Deflection in Low Speed Wind Tunnel
A Study on Performance Comparison of Integrated Aerodynamic-Ramp-Injector/ Gas-Portfire Flame Holder with Cavity
Control of Leading Edge Vortices Using Apex Flap over Non-Slender Delta Wing
Unsteady Darcian Natural Convection within Porous Media of Square Enclosure at Various Rayleigh Numbers
Experimental Study of a Mechanical Flapping Rotary Wing Model
FE-Modal Approach to Model Geometric Nonlinearities of High Aspect Ratio Wing
A Numerical Simulation of Parachute Opening Process Based on ALE Method
Flow Visualized Observation of a Symmetrical Airfoil with Attack Angle in Fluctuating Relative Flow Velocity
Aerodynamic Design Considerations for In-Flight Refueling of Unmanned Vehicles
Effect of Forebody Strakes on Wing Rock Motion on a Generic Wing-Body Configuration Having Chine Forebody
Microgravity Experiment Research on Orbital Refueling Process in the Vane Type Tank
Simulation Analysis on the Problem of Opening Main Parachute Used in UAV Recovery System
Chapter 2: Fluid Dynamics, CFD and other Computational Methods
Numerical Investigation of Water Droplet Impact on Solid Surface in Microgravity
CFD Analysis of a Hypersonic Vehicle Powered by Triple-Module Scramjets
A Novel Expression for the Effective Viscosity to Model Squeeze-Film Damping at Low Pressure
Simulation of 2-D Dam Break Using Improved Incompressible Smoothed Particle Hydrodynamics Based on Projection Method
CFD Modeling and Simulation of Transesterification Reactions of Vegetable Oils with an Alcohol in Baffled Stirred Tank Reactors
Experiment Investigation on Fluid Storage Characteristic and Transportation Performance of Propellant Refillable Reservoir in Microgravity Environment
Design and Tests of Wind-Tunnel Sidewalls for Receptivity Experiments on a Swept Wing
Couette - Poiseuille Two-Layer Flow of a Third Grade Fluid
Experimental Study of Pressure Drop after the Circle Grids Fractal Orifice
Liquid Sloshing Damping Computation in Cylindrical Tank Based on VOF Method
Aerodynamic Optimization Design of Airfoil Based on Directly Manipulated FFD Technique
Free Convection Flow of a Nanofluid Past an Isothermal Inclined Plate
Comparison between Methods of Generation of Waveriders Derived from Streamline Tracing and Simplified Method
Numerical Simulation of a Low Reynolds Number Airfoil
Numerical Investigation of Viscous Laminar Supersonic Flow Past an Asymmetric Biconvex Circular-Arc Aerofoil
Chapter 3: Computational Techniques, Simulation and Numerical Analysis
A DEA Based Model for Ranking Air Freighters Operational Efficiency
Numerical Performance Study of Small Size Lifting-Body Reentry Vehicle
Aspects on the Calculus and Construction of Translation Modules in the Mechanical Structure of an Industrial Robot Possessing Four Degrees of Freedom
Deterministic and Probabilistic Analysis of Steel Frame Bracing System Efficiency
Optimal Solving of the Contradictory Problem between Hydraulic Cylinder's Precision and Stability with Extenics Theory
Artificial Neural Networks for Structural Health Monitoring of Helicopter Harsh Landings
Numerical Study on Buckling Behaviour of Composite Cylindrical Shells under Axial Compressive Load with Asymmetric Meshing Technique
Chapter 4: Dynamics and Vibration
A Study on the Free Vibration of the Prestressed Joined Cylindricalspherical Shell Structures
Vibration Analysis of Rub in Rotating Machinery
Vibrodiagnostics and its Application in Manufacturing Practice
Three-Dimensional Dynamic Behavior of the Flexible Umbilical Cable System
Numerical Analysis of the Exterior Explosion Effects on the Buildings with Barriers
Numerical Research on Dynamic Response of Underwater Vehicles in the Vertical Tube-Exit Stage
Exact Solutions of the Vibration Problem of Beam Structures
The Study of Elastic Dynamic of the Deployment Mechanism in Large Deployable Reflector
Buckling Analysis of Inclined Beam-Column Structures by Using Differential Transform Method (DTM)
Structural Modal Analysis of a New Twin-Rotor Piston Engine
Mechanical Efficiency of a Mass-Spring System in Hypergravity, Normal Gravity and Microgravity
3D Dynamic Hydroelasticity Analysis of Light Weight Pyramidal Sandwich Plates with Imperfection Subjected to Water Impact
Chapter 5: Motors, Combustion, Propulsion, Fuel and Emission Control
Off Design Behavior of a 100kW Turbec T100P Micro Gas Turbine
Lightweight Battery Electric Vehicle for Educational Purposes
UV-Visible Emission Spectroscopy of the Combustion Process in a Common Rail Cl Engine Fulled with N-Butanol - Diesel Blends
Technical Characteristics and Applicationconcept of RBCC Engine
Performance Analysis of Bipropellant Propulsion System on Special Working Conditions
An Analytical and Experimental Study on Coolant Flow and Temperature Distribution within Pem Fuel Cell Stack
Numerical Calculation of Air Mass Flow in a Dual-Rotor Piston Engine
Air Pollution by the Exhaust Emissions from Construction Machinery under Actual Operating Conditions
Premixed Combustion of a Fine AP/HTPB Composite Propellant Based on Detailed Chemical Kinetics
Effect of Pilot Injection on Mixture Formation, Ignition Process and Flame Development in Diesel Combustion
A Review of Ignition Delay and Combustion Characteristics of Biodiesel Fueled Diesel Engine
Study on Mixture Ratio Control of Bipropellant Propulsion System on Satellite Based on Bypass Control System
The On-Road Exhaust Emissions from Vehicles Fitted with the Start-Stop System
Influence of the Mean Friction Pressure on the Temperatures of the Combustion Engine
Computational Modeling of the Liquid LPG Injection into the Suction Manifold of an SI Vehicle Engine
A Study on Systematic Procedure for Choosing the Best Powertrain Configuration in Hybrid Sedan Cars
Contrasting Hot & Cold Testing Technique’s for I.C Engine’s
The Study of Cavity Flow and Transpiration Cooling in Supersonic Combustion
Chapter 6: Instrumentation and Measurement, Control Systems and Automation
Optimal Balancing of a 3-RPS Robot Manipulator Using Genetic Algorithm
A New Method to Detect Fire and Alarm in Confined Space Based on Electronic Nose
Ergonomic and General Ground Control Station Design for Unmanned Aerial Vehicles
Enhancing the Performance of Jet Engine Fuel Controller Using Neural Networks
Real-Time Dynamic Control of a Stewart Platform
The Parameter Identification of the Steep Seam Goafs Structural Characteristics of the Coal and Rock Based on GPR
Compressor Instability: Stall, Surge and their Control
Analyzing and Control of Drive Mode in a Vibratory Ring Gyroscope
Control System Integration for Dual Clutch Transmissions Based on Modular Approach
Bandit Detection System under Unstructed Lighting Condition with Different Discriminant Analysis Approach
Linear Servo Motor Operating Mechanism and Control Technique for High-Voltage Circuit Breaker
Nonlinearity of Maglev Actuator and Adaptive Vibration Control Using Improved FxLMS Algorithm
The Communication Protocol Research of Rail Train Safety Monitoring Sensor Network
Flow Measurement Wavelet Filtering for Ultrasonic Flow Meter
Radar Absorbing Material (RAM)
SCILAB-Based Robust Control Design and Analysis for an Aerospace System
The Study on Analog Module of Underground Cables Environmental Monitoring System Based on CAN Bus
The Method for Numerical Simulation of the Impact on the Infrared Radiation Seeker from the Warhead Shock Layer
Chapter 7: Trajectory Design, Navigation and Control
Optimal Trajectory Planning for Parallel Robots Considering Time-Jerk
Trajectory Design for the Transfer from the Lissajous Orbit of Sun-Earth System to Asteroids
Signal Structure and Simulation of Compass Satellite Navigation System
Initial Alignment Error and Navigation Error Compensation Methods for SINS/CNS Integration
Path Planning and Replanning for Intelligent Robot Based on Improved Ant Colony Algorithm
An Adaptive & Fault Tolerant SINS/GPS Integrated Navigation Scheme Robustified against Slowly Growing Errors in GPS Updates
GPS-INS Integration Algorithm for Autonomous Vehicle Using Loosely Coupled Integration Architecture
The Development of GPS Navigation Systems in Civil Aircraft
Chapter 8: Materials Characterization and Technologies
Mechanical Properties and Fracture Toughness of Alkali Treated Oil Palm Fruit Bunch (OPFB) Fibre/Epoxy Composites
On the Scatter of the Fatigue Limit of a Die-Cast Magnesium Alloy
Moisture Diffusion Characterization of Carbon Fiber Based Polymeric Composites Under Recurrent Hygrothermal Ageing
Uniaxial Mechanical Response of Polycrystalline Shape Memory Alloys
Thermo-Mechanical Behaviour of an Innovant Straw Lime Composite for Thermal Insulation Applications
Investigation of Mechanical Properties and Microstructure of AA2024 and AA7075
Preparation of TiO2/Bio-Composite Film by Sol-Gel Method in VOCs Photocatalytic Degradation Process
Characterization of Fracture Properties of Epoxy-Alumina Polymer Nanocomposite
Damage Induced Anisotropy of Elastic Wave Velocities in Geomaterials under Uniaxial Compression: Numerical Investigation by a Quasi-Micromechanical Approach
Strengthening and Toughening of Unsaturated Polyester by Using Some Additives in Gear Application
The Finite Element Analysis for Dimensional Accuracy in Roll Bending of Aluminum-Polymer Laminated Sheet
Chapter 9: Design, Industry and Manufacturing Technologies
Tool Selection for Machining of Free Form Surfaces
Study on Micro Mill-Grinding Technology
Improved Packing Representation Model for the Orthogonal Packing Problem
Ecological Performance Analysis of Irreversible Rankine Cycle
Fatigue Life Prediction of Electronic Chips Based on Singular Edge Field
A Self-Alignment Sealing Hatch-Door System Updated for Airlock Chambers of KM6 Space Simulator
Design of an ASIC Chip for Spacecraft Data System
Management of Parametric CAD Model by External Tools
Optimization of Multiple Quality Characteristics in Laser Cutting of Difficult-to-Laser-Cut Material
Studies of Toggle-Lever-Toggle 3-Stage Series Force Amplifying Mechanism and its Applications
Research of a New Lunar Landing Gear Technology
Simple Design of a Gravity-Independent Mass Balance
The Finite Element Analysis of the Rollers in a Rotary Steerable Drilling Tool
Simulation Analysis of the Effects of Maintenance Policies on Manufacturing Line Productivity
Chapter 10: Thermal Analysis Technologies, Heat Exchange Engineering and Applications
ECOP Based Comparative Study of Thermodynamic Cycles
Influence of Insulated Rectangular Block on Natural Convection Heat Transfer within Porous Enclosure
Structure Design and Optimization of Vacuum Vessel for Spacecraft Thermal Test
Experimental Studies of a Ranque-Hilsch Vortex Tube
Buoyancy Effect on the Wake of a Confined Circular Cylinder during Opposing Laminar Mixed Convection Heat Transfer
An Analysis of Packed Bed Liquid Desiccant System
Evaporating Meniscus of Ethanol and Ethanol-Based Nanofluids in Single Micro-Channels
Review of Passive Downdraught Evaporative Cooling Technique and its Application
The Thermal Simulation and Control Technology in Spacecraft Vacuum Thermal Test
Software Development for Satellite Thermal Design
The Application of IRAs Optimizing Design in Vacuum Thermal Test
Research on the Thermal Buckling Analysis of the Attitude Liquid Rocket Engine with Film Cooling
