Sonstiges, Englisch, Band Volumes 284-287, 3818 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, Band Volumes 284-287, 3818 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Applied Mechanics and Materials
ISBN: 978-3-0357-2946-7
Verlag: Trans Tech Publications
The papers are grouped as follows:
Chapter 1: Materials Engineering and Processing Technologies of Materials;
Chapter 2: Machine Parts and Mechanisms: Design and Manufacturing;
Chapter 3: Energy and Power Engineering;
Chapter 4: Architecture, Civil and Industrial Engineering;
Chapter 5: Environmental Sciences and Engineering;
Chapter 6: Medical Machinery and Technologies, Innovative Developments;
Chapter 7: Sensors, Mechatronics and Robotics;
Chapter 8: Automation and Control;
Chapter 9: Electronics, Electrical Engineering and Power Electronics;
Chapter 10: Communication, Optoelectronics and Optical Systems;
Chapter 11: Methods and Algorithms for Processing and Analysis of Data;
Chapter 12: Computer and Information Technologies;
Chapter 13: Innovation Management, Product Design and Engineering Management.
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Produktionstechnik
- Geisteswissenschaften Architektur Architektur: Allgemeines
- Technische Wissenschaften Bauingenieurwesen Bauingenieurwesen
- Technische Wissenschaften Elektronik | Nachrichtentechnik Elektronik
- Technische Wissenschaften Technik Allgemein Mess- und Automatisierungstechnik
- Technische Wissenschaften Elektronik | Nachrichtentechnik Nachrichten- und Kommunikationstechnik
- Mathematik | Informatik EDV | Informatik Informatik
- Technische Wissenschaften Energietechnik | Elektrotechnik Energietechnik & Elektrotechnik
- Wirtschaftswissenschaften Betriebswirtschaft Management Forschung & Entwicklung (F&E), Innovation
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde
Weitere Infos & Material
Effect of Bi2O3 Addition on the Microstructure and Electrical Properties of Lead-Free (Na0.5K0.5)NbO3-Ba(Sn0.02Ti0.98)O3 CeramicsA Strain-Rate Gradient Theory of Plasticity and its Comparison with Strain Gradient TheoriesA Study on the Fabrication of Metallic Bipolar Plate for Subminiature Fuel Cell Using Powder Injection Molding ProcessA Study on the Gelation Properties and Rheological Behavior of Gellan GumAn Adaptive-Network-Based Fuzzy Inference System for Predicting Springback of U-BendingAnti-Corrosion Properties of the Reactive Anode and Cathode Inhibitor by Electrochemical Treatment in AqueousAxial Compression for Direct Capture of Carbon Dioxide (CO2)Calcined Powder of the Sol-Gel Synthesis HydroxyapatiteCell Cycle Analysis of Rat Schwann Cells on Chitosan Scaffolds by Flow CytometryCFD Simulation of the Fused Silica Synthesis FurnaceCharacterization of Conductive Thin Films Deposited by Ink Jet PrintingComparative Study on Partial Discharge Characteristic in Polymer-Nanocomposite as Electrical Insulating MaterialDetermination of the Value of E in Metallic MaterialsDynamic Adsorption and Desorption of Toluene on Carbon Nanotubes Grafted Activated Carbon FibersEffect of Acid Etching Durations on Surface Roughness and Residual Stresses of Lightweight Glass CeramicEffect of K2CO3 Addition on the Structure and Electrical Properties of Lead-Free (Na0.5K0.5)NbO3-( Na0.5Bi0.5)TiO3 CeramicsEffect of PE-g-MAH as Compatibilizer on Properties of LDPE/NR/WHF CompositesEffect of Strain Rates on the Mechanical Behavior of Cu Thin Films of Various ThicknessesEffects of Carbon Co-Implantation on Transient Enhanced Diffusion and Performances of the Phosphorus Doped Ultra-Shallow Junction Nano NMOSFETEffects of Cooling Rate on the Microstructure and Mechanical Properties of Ti-6Al-4V AlloyEffects of Substrate Temperature on the Microstructure and Properties of Al-Doped ZnO Thin Films by DC Magnetron Sputtering from AZOY? TargetEngineered Properties of Sustainable Cement-Based Composites Containing Recycled Rock Wool and Supplementary Cementitious MaterialsFabrication and Characterization of Cu-Plated Fine Pitch Patterns on Flexible PolyimideFatigue Strength under Optimal Conditions of Spot Weldment Using GA and FEMFEM Simulation on Rotating Piercing Process with Coulomb FrictionFiber Cross-Section Shape Effect on Rate-Dependent Behavior of Polymer Matrix Composites with Fbgs SensorsFunctionalized Mn2+ Doped Zinc Sulfide Quantum Dots as a Metal Ion Sensor for Industrial WastesImpact Characteristics of CFRP Hat-Shaped Members According to Changes in Outer Layer under the Hygrothermal EnvironmentIntact Ultrathin Ni Films Fabricated by Electroplating with Supercritical CO2 EmulsionIsothermal Section of the Sn-Fe-Zn Ternary System at 270?CLeakage and Fatigue Characteristics of Polyvinylidene Fluoride FilmMicro-Compression Test of Nanocrystalline Nickel Deposited by Supercritical Carbon Dioxide EmulsionNanocrystalline Diamond Particles Prepared by High-Energy Ball Milling MethodNonlinear Dynamic Characteristics of Giant Magnetostrictive Nanofilm-SMA Composite Beam in Axial Stochastic ExcitationNumerical Analysis on Failure Behavior of Composite Sandwich PlateOxidation Resistance and Corrosion Resistance of AlTiCrON Multilayered Coatings on AISI M2 Tool SteelPartial Discharge Characteristics of Natural Rubber Blends with Inorganic Nanofiller as Electrical Insulating MaterialProperties of RF Magnetron Sputtered Sr0.4Ba0.6Nb1.85Ta0.15O6 Thin FilmsSpot Weld Property Testing and Simulation Modeling with Failure CriteriaStatic and Fatigue Strengths of Carbon Nanotube/Epoxy Composites under Hygrothermal EnvironmentsStudy on Multi-Stage Cold Forging of Stainless Automotive Battery FastenerSusceptibility to Stress Corrosion Cracking of Fe-35Mn Alloy under a Pseudo-Physiological ConditionTaguchi Method and Genetic Algorithm Neural Networks Analysis of Forging Process of Bicycle Chain WheelTaper Angle of Silicon Nitride Thin Film Control by Laser Direct Pattern for Transistors FabricationTexture Evaluation of Sol-Gel Derived Mesoporous Bioactive GlassThe Influence of Ti and Al Additions on the Mechanical Response of Cobalt SuperalloyThermal Annealing Effects Study on Electrical and Structural Properties for Ni-Au/n-GaN Schottky ContactsThermal Stabilities and Mechanical Properties of Two Tetra-Functional Epoxy ResinsTitanium-Doped Indium-Tin-Oxide Anti-Reflection Coating for Poly-Si Solar CellsFatigue Quality Index by Infrared Stress Measurement in Spot WeldmentA Study of Fabrication Nanopowders of Cu2ZnSnS4 for Solar Cells AbsorbersEffect of PAO-Based ?-Fe2O3 and Surfactant Concentration on Viscosity CharacteristicAdsorption Behaviors of Nucleic Acid by Cationic Magnetic NanoparticlesAnnealing Effects on Hydrophobic AlN CoatingsDegradation Mechanism of III-V Triple Junction Solar Cells Analyzed Using Step Stress TestsDetecting Soil Water Content of Red Soil and Younger Alluvial Soil Using a SpectrometerDry Machining of T6061 Aluminium Alloy Using Titanium Nitride (TiN) and Titanium Carbonitride (TiCN) Coated ToolsEffect of Textured Surface on Sliding Friction Investigated Using Molecular Dynamic SimulationEffects of an Extended Amphipathic Helix on Intermolecular Interactions and Self-Assembly of Peptides via Pulsed Field Gradient Nuclear Magnetic ResonanceEffects of SiO2 and TiO2 Nanofillers on Conductivity Level of LLDPE-NR Nanocomposite HV InsulatorFlame Synthesis of Carbon Nanotubes and Nano-Onions in a Rotating Opposed-Jets FlowInvestigation of Hybridization Efficiency of a Sequence-Orientated Coaxial DNA Probe Microarryed on Biochips Using Atomic Force MicroscopeThe Humidity Property of the AR Texture with SiO2 Nanospheres by Spin Coating MethodThe Effect of Annealing Temperature on the Opt-Electric Properties of Ti:GZO Transparent Conducting OxidesThin FilmThe Curing Cycle Grouping of Aerospace Composite ShopSubmicron Patterns on Sapphire Substrate Produced by Dual Layer Photoresist Complimentary LithographyStudy on CO2 Adsorption on LiOH-Modified Al2O3Study of Zinc Oxide Films on SiO2/Si Substrate by Sol?Gel Spin Coating Method for pH MeasurementStudy of Biodegradable Polyurethane Foam as Carriers for Low C/N Ratio WastewaterStress Analysis of Carbon Nanotubes Reinforced NanocompositesStochastic Nonlinear Vibration of Fluid-Loaded Double-Walled Carbon NanotubesSize Effect of Silver Nanoparticle Melted into ZnO Nanorods for Photocatalytic ActivityRobust Design Analysis on Fatigue Life of Lead-Free Sn0.5Ag Solder in a Multichip Module PackageResearch on the Synthesis Process of Ethylmaltol by ElectrochemistryResearch on the Extraction Process of Water-Soluble Asparagus Powder and Removal of Free RadicalOptimization Technology and Developing of Vascular StentsOptimal Buffer pH Value on the Detection of HSA by Using a Protein Chip Prepared by DNA-Directed ImmobilizationNeural Network MIMO Model for Production of Isopropyl Myristate in a Semibatch Reactive Distillation ColumnNeural - Wiener Model for Multivariable Methyl Tertiary Butyl Ether (MTBE) Reactive DistillationNanoscale Removal Processing by a Twin-Cylinder ToolNanoparticles Composed by Oligochitosan and Polyethylenimine for Gene DeliveryKinetic Model with Effect of Water Content for Enzyme-Catalyzed Citronellyl Laurate Esterification ProcessLight Reflectivity of Multiwall Carbon Nanotubes with Pattern-Less or Pattern-Grown NanotubesAn Analysis Method for Deepwater TTR Coupled Vibration of Parameter Vibration and Vortex-Induced VibrationAeroelastic Behavior of Morphing Wing in Flutter RegionsAn Electromagnetic Sensing Method (ESM) to Detect the Short-Circuit in PCBContour Positioning System - New Traveling Distance Estimation Method for Electric VehicleDesign and Simulation of Laser Module Packaging of TO-Based Butterfly-Type StructuresDynamic Analysis of a Geared Rotor-Bearing System with Time-Varying Gear Mesh Stiffness and Pressure AngleExperimental Study of Dual Heater Slider Touchdown DetectabilityFrequency Dependence on Image Reconstruction for a Buried Conducting CylinderInnovative Derivation for Physics RelationsMaximization of Solar Gains of an Air Collector by SimulationsMeasurement of Radius of Curvature by Coordinate Measurement MachineMeasuring Path without Tool Center Point Function for B-Type Five-Axis Machine ToolModulations of Amplitude in Mobile Acoustical HeritageNon-Iterative Mode Shape Expansion for Beam Structures Based on Coordinate DecompositionNumerical Comparison of Methods for Solving Boundary Layer Problems in HydrodynamicsOn Studying Fluidic Motions in an Oscillating Heat PipeOptimization of Aerodynamic Performance of Wind Turbine BladesRapid Discrimination of Bacteria and Bacteriophages by Raman SpectroscopySeawater Flow Characteristics and Drag Force Variation with Inflow Angle in Tidal Current Turbine SystemTaguchi Optimization of Machining Quality in Step Drilling of Composites Based on Membership FunctionThe Application on Gear Fault Detection by Using Fast Time-Frequency Order SpectrumThe Fluorescence Image of Portable System Enhanced by Asynchronous Trigger UV-LED ExcitationThe Membrane Thickness Prediction of Solder Paste Process by Phase-Shifting ProjectionThe Numerical Simulation of Two-Degrees-of-Freedom Vortex-Induced Vibrations of Circular Cylinder with High Mass-RatioThe Study of Dynamic Simulation on Five Axis CNC MachineTheoretical Study on Premixed Flames of Nano Aluminum Particles and Water MixtureUltrasonic Tomography System: Optimizing the Frequency in a Metal Pipe ConveyorA Finite Element Approach to Dynamic Stresses of Helical Gear Pairs Considering Tip Relief and Crowning ModificationsA Sensing Device on Liquid DensityActuation of Adaptive Rearview System for MotorcyclesAdvances in Safety Assessment Method for Thin-Walled Shell?s Structure Containing DefectsAnalysis of a 3-DOF Rotationally Symmetric HingeAnalysis of NO Formation in Counterflow Premixed Hydrogen-Air FlameLight Weight Design for a Concept Sports Car Using Composite MaterialApplication TRIZ Principles for Design and Manufacturing Coconut Cutting MachineBenefits on Implementation of Reduced Vertical Separation Minimum (RVSM) in UzbekistanComplex Freeform Surface Measurement Based on Stereo Vision and Digital Phase-Shifting TechniquesConceptual Design of a Novel Three-Speed Geared MotorConceptual Design of Integrated Brushless Permanent-Magnet Motors and Planetary Gear TrainsCone Frustum Part Simulation Performance of Turn-Mill Five-Axis Machine ToolConstructal View of Design and Evolution of Flow Configuration in Nature and EngineeringConstruction of an Elementary Model for the Dynamic Analysis of a Pressurized Water ReactorCooling the Hydro-Powered Synergistic Nozzle Light by WaterDesign and Analysis of Acoustic Horns for Ultrasonic MachiningDesign and Analysis of Tubular Linear Machines with Dual Halbach ArraysDesign and Characterization of Precise Laser-Based Autofocusing Microscope with Reduced Geometrical FluctuationsDesign and Performance Analysis of Dual Vibrating Motors Self Synchronous Shaker with Balanced Elliptical MotionDesign of Dual Layer Liner with Deformable Semi-Spherical Convex for Bicycle HelmetDesign of the Hybrid-Propeller Shaft Using Composite MaterialsDesign Techniques for Reducing Cogging Torque in SPM Motors Using Shifted Slot OpeningDetailed Measurements of End-Wall Heat Transfer Coefficients of Square Pin-Fin Heat Sink for LED Lamp at Forced Convective StateDetermination of the Optimal Geometrical Features of a MicrodrillDevelopment of a Nanoscale Micro-Machining MachineDevelopment of Thermoelectric Conversion System for Waste Heat Recovery of Automobile Engine Exhaust GasDynamic Analysis of the Proton Exchange Membrane Fuel CellDynamic Characteristics of New Tooth Profiles Gear Generated by a Novel Rack-CutterEffects of Number of Circumferential Casing Grooves on Stall Flow Characteristics of a Transonic Axial CompressorEffects of Thermo-Physically Initial Properties on Inverse Heat Conduction ProblemEvaluation of Wall Heat Transfer in Blade Trailing-Edge Cooling PassageExperimental Investigation of Airflow Distribution for a Novel Combustor ModeExperimental Testing and Finite Element Modeling of Bump Wafer ProbingExtracting Single Source Geometric Error Value from a Double Ballbar Measurement Error MapFree Vibration of Fluid-Loaded Transversely Isotropic Magneto-Electro-Elastic PlatesFriction Analysis on Vane of an Existing and of a Novel Multi Vane Rotary CompressorHeat Transfer Enhancement of the Liquid-Cooled LED Illumination ModuleHeat Transfer Enhancement of Vertical Heat Sinks with a PiezofanImpact and Ricocheting of a Cannonball Colliding onto Sea by Nose-Cone ShapeImproved Energy Performance of Air-Cooled Liquid Chillers with Innovative Condensing-Coil Configurations
In Situ Spacing Fluctuation Monitoring of Hard Disk Drive with Thermal Asperity SensorsInvestigation of the Non-Equilibrium Flow Phenomena in the Boundary Layer of the Scramjet EngineMathematical Modeling and Analysis of Vibration Characteristics of Smart-PhoneMathematical Modeling of Ball-End CutterMechanical Efficiency Analysis of a 16-Speed Bicycle Transmission HubA Study of Micro Injection for Unibody Array LED Lampshade with Multi-CavitiesA Study of Heat Transfer Characteristics of LED Heat Sink and Graphite Heat Sink Process Technology DevelopmentAn Appropriate Design in Dimensions of Submount with Extra-Low Thermal Resistance for High Power LEDMHD Couette Flow in Cylindrical Porous Annulus with Perfectly Conducting WallsModeling and Simulation Study of a Series Hydraulic Hybrid VehicleMulti-Objective Optimal Mechanical Power for Turbine of River Current Power Generation Using Fuzzy Dominant Directed-Graph MethodNatural Convection Heat Transfer of Annular Metal Porous Medium Heat Sink of LEDNumerical Investigation of a Crossflow Jet in a Rectangular MicrochannelNumerical Model of Journal Bearing Lubrication Considering a Bending Stiffness EffectNumerical Study of the Influence of Refractory Thickening on the Reacting Flow and DeNOx Effect in a CO BoilerOn the Design of Planetary Gear Reducer with Simple Planet GearsParametric Study on Aerodynamic Performance of a Transonic Axial Compressor with a Casing Groove and Tip InjectionPerformance Enhancement of a Small Centrifugal Cooling FanPolymerase Chain Reaction Microfluidic Devices with Integrated Water Cooling ChannelPrediction of Swirl Flow and Heat Transfer through Square Duct with Twisted Tape InsertPredictions of Maximum Forging Load and Effective Stress for Strain-Hardening Material of near Net-Shape Helical Gear ForgingPressure Drop of Two-Fluid Mixtures in a Y-Typed Microchannel with Varying Cross-Section AreaReliability Test of a Rule-Based SCR Control Strategy for Cleaner Heavy-Duty Diesel Engine using Biodiesel BlendReliable Method of a Non-Insulated Double-Pipe Heat ExchangerResidual Stress and Bead Profile Analysis of Pulsed Nd:YAG Laser Lap WeldingShape Optimization of a Microchannel Heat Sink with Phase ChangeSimulation and Control for Load Change Process on a Solid Oxide Fuel CellSimulation of Airflow in the Engine Compartment of a Light AircraftSimulation of NO Formation in Hydrogen-Air Counterflow Diffusion FlameSpeed Design of Lift-Up Mechanism in a Welfare VehicleStability Analysis Model of a Quadruped Walking Machine at Walking up a StepStructural Optimization on Composite Blades of Large-Scale Wind TurbinesThe Analysis of Convergence of Shell Element with Rigid Body DisplacementsThe Analysis of The Dynamic Characteristics on Seed Plate of The Vacuum Planters for Precision SowingThe Conceptual Design of Differential MechanismsThe Kinematic Design of Three-Speed Automatic Transmission for Electric MotorcycleThe Novel Adjustable Mechanisms for Exact Multi-Path GenerationThe Possibility of Visualizing Temperature Fields Using Digital Holographic InterferometryTorsional Strength Analysis of Output Shaft in Portal Axle Using Finite Element AnalysisTransient Simulation Method for Autorotation in Forward FlightTwo-Dimensional Simulation of EM Scattering from a Rotating Circular Dielectric CylinderVibrational Analysis of Planetary Gear Trains by Finite Element MethodIntelligent Modeling and Optimization of Carbon Anode Baking TemperatureModeling of Flyback Converter for Micro Machining Biomedical ComponentDynast ? Computer Program Used in Power EngineeringEfficiency Analysis of Subsystems of Compressed Air Wind Energy SystemEstablishment of a Removable Experiment Platform for VAWTExperiment of a Tesla Engine for Wind Energy CaptureInformation Security Study on Innovative Power Meter SystemWind Energy Potential in TaiwanWind Energy Conversion System Power Forecasting Using Radial Basis Function Neural NetworkControl and System Integration of a Small Vertical-Axis Wind Rotor Coupled a Generator Having Two WindingsEmergency Generators Planning for a Mass Rapid Transit SystemInnovated Fault Diagnosis for Power Transformer Using Hybrid Fuzzy Dissolved Gas AnalysisOO-Based STATCOM Installation for Power System Loading Margin ImprovementParameter Estimation for Composite Load Model Using a Hybrid Searching MethodParticle Detector for Gas Insulated Switchgear and the Effect on EnvironmentSimulation Panel on Conductivity for Polarization and Depolarization Current (PDC) Measurement of Offline Monitoring Using LabVIEWThe Effect of Electrical Switch Structure to the Contact Voltage-Drop and Temperature VariationsTransformer Faults Classification Based on Polarization and Depolarization Current (PDC) Measurement Test Data on Mineral Oil SamplesA Research for Site Detection Scheme for the High Temperature Superconducting Cable from the Electrical Point of ViewComparative Study on Effect of Temperature & Moisture on Transformer Insulation ConductivityHVDC Switching Using Microprocessor for Polarization and Depolarization MeasurementInvestigation of Plasma Generator Driving by High-Frequency High-Voltage Electric SourceThe Energy Storage System for Light Trails Applications Based on the SupercapacitorsApplication of LAPUR6 to Lungmen ABWR Stability AnalysisVarious MTC Studies of TRACE with RCS Pressure Predictions under ATWS for MaanshanApplying Innovative Models for Forecasting Small-Area Peak Electrical LoadsPV Model with Energy Balance Equation for Commercial PV ModulesCritical Electric Field of InGaN p-i-n Solar CellA Study of Solar Energy Produce Hydrogen Combine Fuel Cell Generator SystemEnergy Billing System with Demand ControlA Passive Islanding Detection Method for Grid-Connected Renewable Generation SystemA Study on the Development Direction of Korean Green Building Assessment by Analyzing Comprehensive Scoring MethodsFundamental Elements of Malaysia Green HighwayThe Analysis and Application of Architectural Meteorology for Low Carbon Buildings in TaiwanAn Optimal Design for the Capacitated Hub Location Problem with Asymmetric AllocationAn Investigation into the Strength of Concrete-Filled TubesAn Experimental Study on the Connection of Diaphragm in Prefabricated BridgeAnalytical Simulation of Axial Behavior of RCFT WallA Study on the GA-Based Design for Recycled Aggregate ConcreteReinforced Concrete Finite Element Analysis Incorporating Material Nonlinearity and Failure Criteria AspectsMicrostructure and Mechanism of Concrete Using Inorganic Silicate AdmixtureThe Application of MRI for Scanning Internal Cracks of Cement-Based MaterialAssess of the Nuclear Power Plant Structures Residual Life and Earthquake ResistanceControl of Lateral Displacement for Super Tall Building by Floor & Partial 3D BraceFull-Scale Measurements on Vibrations of a 51-Story Tall Building Due to a Major Earthquake and TyphoonLocal Characteristics of Light-Framed Wood Buildings in Preparation for Wind LoadResponse of Water Tower on Wind Induced Vibration Considering Interaction of Fluid and StructureShear Characteristics of Large Anchorage SystemTwo-by-Four Construction System for Earthquake PreparationCross Modal Strain Energy Method for Damage Detection Using Limited Modal DataCurriculum Innovation for Fostering Green Building Literacy in General EducationDurability Analysis on Reactive Powder Concrete as Barrier Materials for Low-Level Radioactive Waste DisposalEffective Steel Area of Fully Embedded Cold-Formed Steel Frame in Composite Slab System under Pure BendingEffects of Site Classification on Empirical Correlation between Shear Wave Velocity and Standard Penetration Resistance for SoilsEnergy Consumption and Potential Retrofitting of Rest and Service Areas (RSAs) in Malaysia Case StudyEvaluation of Degradation of Concrete Exposed to High Temperature by Means of Ultrasonic Pulse MethodEvaluation of Tip Capacity Analysis Model for Drilled Shafts in Gravelly SoilsEvaluation on CO2 Emission of Light Weight Steel Housing in TaiwanExperimental Investigation of Retrofitted Extended End-Plate ConnectionsFlexural-Torsional Buckling of Double-Angle Compression MembersGeochemistry Properties of Southern Malaysian Organic SoilImpact on the Strength of Newly-Placed Concrete-Filled Tube under Earthquake ExcitationImplementation of a Vibration-Based Bridge Health Monitoring System on Scour IssueInfluence of Open Channel on Explosion-Induced Vibration Wave PropagationUsing Acousto-Optic Coupling Technology to Investigate the Fracture Evolution of Rock-Like Materials during Inclined Shear TestsThe Influence of Soil Grading and Compaction Pressure on Characteristics of Compressed Cement-Soil MaterialsThe Appropriate Fire Prevention Technology for Historic BuildingsThe Application of Light Weight Aggregate Using Reservoir Sediments for Concrete Filled ColumnsStructural Performance of the Tensioning Air Beam System and its Analytical ModelingStructural Performance of High Strength Concrete Filled Steel Tube with the Width-to-Thickness RatioStructural Behaviour Evaluation of Natural Draught Cooling Towers under the Consideration of Shell-Geometric ParametersStrength Performance of T-Headed Rebar in ConcreteSolar Fa?ade for a Combined Heating and Cooling System in LondonSimulation of Accordion Effect of I-Girder with Corrugated Steel WebsResponse Spectrum Analysis of the Condensate Storage Tank in a Nuclear Power PlantNumerical Modelling of Stiffness and Strength Behaviour of Top-Seat Flange-Cleat Connection for Cold-Formed Double Channel SectionMountain Roads Design Using Ecological Engineering Methods and Traditional Engineering Methods Comparison StudyModel Simplification for Offshore Platforms Using Model Refinement SchemeLive Load Distribution in Prestressed Concrete Girder Bridges with Curved SlabA Risk-Based Approach to Determine the Optimal Service Life of Steel Buildings in Seismically Active ZonesCase Study on the Environmental Education Application Status for Water Recycling Facilities in Elementary and Junior High Schools in YilanIntegrating Principle Component Analysis and Canonical Correlation Analysis for Monitoring Water Quality in Storage ReservoirThe Evaluation of River Conditions in the Lanyang Plain through the River Ecological Corridor ApproachSequestration of CO2 in Geological Media: A Case Study of the Saline Reservoir Using Parallel Computing for Multi-Well InjectionReservoir Drought Prediction Using Two-Stage SVMRecycling Applications of Microalgal Carbon Fixation Conducted by TaipowerProbability Distribution of Tidal Elevation Data around Korean CoastsPrediction of Regolith Depth Using Topographic and Environmental Variables in the Central Mountain Division, TaiwanMission Track Coordination Based Multi-Objective Optimization for Multi-Satellite Imaging SchedulingLoss Curve Analysis of a Debris Flow: A Case Study on the Daniao TribeEnvironmental Sustainability Assessment Based on the Concept of Carbon Carrying CapacityAnalysis of Spatial Distribution of the Neolithic Settlements in Zhengzhou-Luoyang Area by Using GISDirectly Georeferenced Ground Feature Points with UAV Borne Photogrammetric Platform without Ground ControlTracking Multiple Fishes Using Colour Changes Identification and Enhanced Object Tracking AlgorithmBone Trabecula Surface Reconstruction for Cranium Scaffold in Bone Tissue EngineeringDesign and Development of Oral Appliance for Obstructive Sleep ApneaImproved Functional Approach on Hip Joint Center EstimationMeasurement of the Human Cochlear Spiral Curvature In VivoRelationships and Comparisons of Finger Surface Temperature Measurements from Three Different Kinds of Temperature SensorsThe Development of the Liquid Cell Smear Device for Liquid-Based Cytology TestThe Non-Invasive Measurement of Geometry of Human OssiclesUse of Data Mining Techniques to Detect Medical Fraud in Health InsuranceApplication of Electronic Nose Technology in Breath Tests for Patients with DiabetesEfficient RPM Method for Detecting R and S Waves of ECG SignalsA Bridging Method between 2D and 3D Cephalometry Using Computed Tomography Synthesized CephalogramsA Novel Approach to Predict Schizophrenia Disease: Conceptual FrameworkA Study on the Control of Bio-Aerosol for Prevention of Indoor Aerial Infection Using Antimicrobial Air FilterAn Application of CLPFG for Detecting Diabetes MellitusAn Expert System for 2D Stress Analysis of Human TeethAn FPGA-Based Brain-Computer Interface for Wireless Electric WheelchairsAn Improved Demon Registration with Mutual Information for Non-Rigid Medical ImagesAn Ultra-Low Power Holter and Low Complexity Design Using Mixed Signal ProcessorComputer-Aided Dental Implant TechnologyBed Site Health Care Video-Phone SystemEffects of Cardiovascular Stent Design on Wall Shear Stress Distribution in Straight and Curved ArteriesInteractive 3D Simulation System for Orthodontic Treatment of MalocclusionThe Study on the Correlation of Vibration Stimulation Intensity and Muscle ActivityThe Potential Predictors of Motor Performance Outcomes after Rehabilitation for Patients with StrokeThe Encoding Analysis of Brainwave for Direction RecognitionThe Application of LSA in TCM Syndromes ClassificationStudy of Quality Evaluation Indexes in Filtered ECG SignalSpatial Imaging of the Human Tympanic MembraneSolitary Pulmonary Nodule Detection on Thoracic CT Images through Object Continuity AnalysesPhysical Rehabilitation Assistant System Based on KinectObstructive Sleep Apnea Identification by Heart Rate Features Derived from Intrinsic Mode FunctionMID-Based Instant Transmission of Radiological Images for Emergency TeleconsultationLocation-Based Service (LBS) Falling-Detection and Alarm System by SmartphoneTracking Contrast Agents from Ultrasound Image Using Texture Preserving Optical Flow EstimationThe Head Shadow Phenomenon Affected by Sound Source: In Vitro MeasurementA Low Cost and Efficient Volumetric-Error Measurement Method for Five-Axis Machine ToolsA Low Power CMOS Temperature SensorA Real-Time Center of Gravity Trajectory Generation of a Biped Humanoid under Variable Reference ZMP TrajectoryA Wave-Powered Technique for Water Column ProfilingAn Adaptive Nonlinear Trajectory Tracking Design for Mobile Robots and it?s Practical ImplementationAnalysis of the Degradation Tendency of NPP Cables Using a Wireless Cable Indenting RobotApplication of Magneto Rheological Damper on Semi-Active Suspension SystemBackstepping Adaptive Iterative Learning Control for Robotic SystemsBayesian Estimation Algorithm Applying in Gas Detection ModulesBlowers of Vacuum Cleaners Utilizing Coreless and Sensorless Axial-Flux Motors with Edge-Wire CoilsControl and Response Characteristics of a Mixed Mode MR Damper for a Multi-Story StructureControl Hardware Design of a Robotic Follow Spot SystemCross-Coupling Controller for Five Degree-of-Freedom Coplanar NanostageDesign and Application of Low Cost Redundancy Interface for UAV Distributed Servo SystemDesign and Experimental Results of a Quad-Rotor Control SystemDesign and Performance Evaluation of Modular Electro-Mechanical ActuatorDesign for a Novel Electromagnetic Valve for Camless SI EnginesDevelopment of a Web-Based Virtual Five-Axis Milling Toolpath Simulation SystemDevelopment of an Onboard Automatic Tire-Wear Warning SystemDevelopment of the Searching Algorithm with Complexity Environment for Mobile RobotsDynamic Characteristics and Finite Element Model Updating of Micromachined Torsion StructuresDynamic Stiffness Effects on Robot Safety and Performance in Human-Friendly RobotsEmbedded Force Control Gripper for Frangible Fruit Robotic ManipulationEvaluation of Analytical and Finite Element Modeling on Coupled Field Dynamics of Piezoelectric Cantilever Bimorph HarvesterFast Development of Flexible Motor Control System with Model Based DesignForce and Position Control of the Pneumatic Cylinders through a Microscope with a CCD CameraImproving the Accuracy of Depth Estimation in Binocular Vision for Robotic ApplicationsMechatronic System Design for Science/Work Class ROVMicro Pressure, Temperature and Flow Sensors for Integration in Micro Methanol ReformerMotion Planning of Multiple Pattern Formation for Mobile RobotsNew Fault-Tolerant Scheme for Flight Control System of Unmanned Aerial VehiclesPanda Robot: Kinematic Design and Simulation for Quadrupedal WalkingPassivity-Based Parameter Estimation and Position Control of Induction Motors via Composite AdaptationPiezo-Actuated Micro-Drilling Process Control by Using an Adaptive Sliding Controller with Fuzzy CompensationQuasi-Static Step Number Determination Method of a Quadruped in Step CrossingRealization of a Motion Control System for Wafer-Handling Robot Using SoPC TechnologyReal-Time Navigation for a Humanoid Robot Using Particle FilterRobust Adaptive Trajectory Control for an Omnidirectional VehicleStudies on the Exchangeability of Different APT Interpreters for 5-Axis Machine Tool ApplicationsSynthesis of Two-Degree-of-Freedom Rotational Decoupled Manipulators of a 2R-Type BranchSystem Identification and Robust Control of a Pneumatic Muscle Actuator SystemThe Effect of Thermal Contact Resistance on Heat Management in a Shuttling PCR SystemThe Fault Tolerant Output Selector Based on Fault-Detection Considering Realistic Fault Modes for Pedal Simulator of Brake-by-Wire SystemThe Nonexistence of Three Degrees of Freedom Rotational Fully Decoupled Parallel MechanismThe Performance Analysis of an AKF Based Tightly-Coupled INS/GNSS Sensor Fusion Scheme with Non-Holonomic Constraints for Land Vehicular ApplicationsThe Squeeze Film Damping Effect on Dynamic Responses of Micro-Electromechanical ResonatorsThe Vibration Problem Studying in Micro Actuator System Using the Differential Transformation MethodT-S Fuzzy Tracking Control of a 2-DOF Rehabilitation Robot Using System IdentificationUnmanned Vehicle Obstacle Avoidance Using Single Sensor Scan Method and Danger Zone EstimationA Channel Reuse Procedure in Clustering Sensor NetworksA High Sensitivity Index Sensor Based on No-Core FibersA Learning Concentration Detection System by Using an Artificial Bee Colony AlgorithmA Low Cost System for 3D Motion Analysis Using Microsoft KinectA Novel Energy Efficient Joint Dynamic Emissive Location-Based Routing Scheme for SOFAR Channel Underwater Sensor NetworksA Novel Wireless Thermal Convection Type Angular Accelerometer Integrated with an Active RFID-TagA Positioning Scheme Combining Kalman Filtering with Vision Assisting for Wireless Sensor NetworksA Robust Occupancy-Based Building Lighting Framework Using Wireless Sensor NetworksA Study on the Implementation of Dynamic Routing Algorithm to Improve Efficiency for Wireless Sensor NetworksAn Efficient Positioning Algorithm Based on PID in Indoor Spaces Using RFID TechnologyDesign and Fabrication of the Piezoelectrically Actuated Micropump with Implanted Check ValvesDevelopment of a Portable Automated Piano Player CantaPlayerDynamics of New Electromagnetic Valve in Camless EnginesEnergy Efficient Sensor Configuration by Fishing Spider Inspired MechanismEstimation of Occluded Lower Limb Using Inverted Pendulum ModelGrade Diffusion AlgorithmGrating-Coupled Surface-Plasmon-Resonance Biosensor Discs with a C-Type Fluidic Channel for Monitoring Growth of Self-Assembled MonolayerImplementation of Lane Departure Warning System Based on Machine VisionIterative Learning Control of a Piezo-Actuated Positioning Stage for Micro/Nano ManipulationWindshield Warning System for Intelligent VehiclesVisual Servo Tracking Control for Slider Robot Using CMAC Neural Network Recognition ApproachTwo Fluid Mixing in a Micromixer with Helical Channels and Grooved SurfacesTrain Detection by Magnetic Field Measurement with Giant Magnetoresistive Sensors for High-Speed RailwayThe Single-Pass Perceptual Embedded Zero-Tree Coding Implementation and Optimization on DSPThe Box-Cox Transformation-Based ARFNNs for Identification of Nonlinear MR Damper System with Outliers and Skewness NoisesStudy on One-Dimensional Scanning Semiconductor LidarSelf-Tuning RBFNs Mobile Robot Systems through Bacterial Foraging Particle Swarm Optimization Learning AlgorithmScaling Issues of Micro Catalytic ReactorsRobot Simultaneous Localization and Mapping Using Speeded-Up Robust FeaturesReliable Cluster-Based Routing Algorithms in Wireless Sensor NetworksReaching Agreement in a Dual Fallible Cluster-Based Wireless Sensor NetworkpH Value Detection with CLPFG SensorNew Type Small-Angle Sensor Based on Multiple Total Internal Reflections and Attenuated Total Reflections in Heterodyne InterferometryMulti-View 3D Object Reconstruction Using Coordinate TransformationLow Luminance Dynamic Range Converter for Vehicle ApplicationNew Drift Reset Method for Pedestrian Tracking with a Low-Cost IMUVisualization in a Virtual Laboratory: An Approach Using a Collaborative Simulation for Electro-Mechanical SystemA Novel and Experimental Design for Mechanical Ventilation with Optimal Spontaneous Flow Pattern and WOB Feedback ControlA Novel Hybrid Recurrent Wavelet Neural Network Control for a PMSM Driven Electric ScooterAchieving Passive Integral Control Using Feedback and Output RedefinitionAdaptive Single-Neuron Proportional-Integral-Derivative Controller Based on MemristorAdvanced Mode Control Strategies for Inverter Based Distributed Generators in Micro-GridsAn Intelligent Garbage Can Decision-Making Model Evolution Algorithm on Optimal Design of Fuzzy Controller of Intelligent Lighting SystemsAssembly Sequence Planning Based on Max-Min Ant Colony SystemDelayed State Feedback Control for Singular Plants with Device DelayDesign and Experiment of Iterative Learning Controller Based on Particle Swarm Optimization Approach with New Bounded Constraints TechniqueExtension of Elementary Siphons in a Class of Generalized Petri NetsFuzzy Simplex-Type Sliding-Mode ControlIntelligent Sliding-Mode Control for Knee Rehabilitation SystemInteracting Multiple Model Particle Filters for GPS/INS IntegrationMRF Hydraulic Mount System of Coach and Research of its Fuzzy ControlPID Controller Tuning by Differential Evolution Algorithm on EDM Servo Control SystemPitch Attitude Control Design of Unmanned Aerial Vehicle via Hardware-in-the-Loop SimulationQuality Inspection of the Riveting Process by Neural NetworksReal-Time Breakthrough Detection for Laser Drilling Based on Coaxial Visual Sensing TechnologyRemote Filter Design for Discrete Singular SystemsResearch on the Fuzzy PID Controller Based on PLC Applied in the Cold Pellet ProductionRobust Adaptive Controller Design for a Quadrotor HelicopterRobust Control Design Based-On Integral Sliding-Mode ControlRobust Exponential Stability for Uncertain Neutral Systems with Interval Time-Varying Delay and Nonlinear PerturbationsRobust Finite Time Controller Design for Second Order Underactuated Mechanical SystemsSigned-Distance Fuzzy Sliding Mode Position Control for an Energy-Saving Electro-Hydraulic Control SystemSliding Mode Control for the Dual-Excited and Steam-Valving Control of Synchronous GeneratorSliding-Mode Tracking Control of a Precision StageSwitching-Type Self-Tuning Fuzzy PID Control of an Active Magnetic Bearing SystemTakagi-Sugeno Fuzzy Estimator Design for Adaptive Vector Control SystemsThe Study on Robust Controller Synthesis Using Genetic Optimization Algorithm Integrating Taguchi MethodsVoltage Control of PM Synchronous Generator System Using Recurrent Wavelet Neural Network ControllerWind Shear Encountered Landing Control Based on CMACsDesign of Robust and Non-Fragile Kalman Filter with Polytopic Uncertainties: PLMI ApproachAdaptive Temperature Set Point of Air Handling Units Using Fuzzy LogicsHigh Performance Power Conditioning System Using Dynamic-Game-Theory-Based Variable Structure ControllerDesigning and Realizing of Universal Test and Analysis System of Avionics Data BusDeveloping an Expert System of Failure AnalysisGA Based Hybrid Fuzzy Rule Optimization Approach for Elevator Group Control SystemGreen Transport System: A Technology Demonstration of Adaptive Road Lighting with Giant Magnetoresistive Sensor Network for Energy Efficiency and Reducing Light PollutionInfrastructure Damage Reporting System with Location AwarenessTo Develop a Parallel Processing System with the FPGA for Multi-Axis Motion Control PlatformReal-Time Vehicle License Plate Recognition Based on Scanning and 2D Haar Discrete Wavelet TransformPerformance Improvement of Wild Flower Boundary Extraction in Complex BackgroundMissile Guidance Algorithm Design Using Particle Swarm OptimizationUsing Bayesian Networks in Gear Fault DiagnosisA Low Power CMOS Bulk-Controlled Sub-Harmonic Mixer for LTE-Advanced ApplicationsA Novel Data-Oriented Methodology for Designing Complex SOC System with Bluespec SystemVerilogA Quick Response Power Factor Detector for Nonlinear LoadsA Single-Phase Soft-Switching Unipolar PWM RectifierA Single-Switch HPF AC-to-DC Converter with Low Voltage RippleA Study of Eliminating the Protective Coordination Curve Intersection of Electromechanical Overcurrent Relays in Subtransmission SystemsA VLSI Architecture of 2-D Discrete Wavelet Transform for Reducing Computation TimeAirborne Panel Series Circuit Module Test System Software DesignAnalysis and Design of the Active Clamp Forward Converter as a Color LED DriverApproach to Developing Interleaved Converter with Single-Capacitor Turn-Off SnubberCharacteristics of Memristor Series-Parallel Connection Circuit with ApplicationsCoordinated Converter-Charger for Hybrid Fuel Cell-Battery Power SourcesDesign and Implementation of a Fuzzy Time-Varying Sliding Regime Controlled UPS SystemsDesign and Implementation of a Novel High-Step-Up DC-DC ConverterDesign of Clock and Ramp Generator Circuit Framework with 0.9V Low Operational VoltageDesign of High-Efficiency Voltage-Mode Class-D RF Power Amplifier for Class-S Transmitter Using Signal Analysis and Additional Multi-Section Bandpass FilterEMC Issues of Low Frequency Interference of Power Electronic ConvertersImplemented LDO Chip With Output Capacitors FreeLow-Power Fast-Settling Low-Dropout Regulator Using a Digitally Assisted Voltage Accelerator for DVFS ApplicationTwisted-Overlap Differential-Pair Approach to Increase Available Layout Space and Reliability in PCB DesignDesign and Implementation of a Dimmable LED Driver with Low-Frequency PWM ControlImprovement on Resistive Switching Characteristics of SiO2-Based Films by Voltage StressingInterleaved Boost Converter with Boost-Type Snubber for PV Power SystemInterleaved Soft-Switching Converter with L-C-D Snubber for Reflex ChargerTowards Motion Recognition on SmartphoneResistive Switching Characteristics in Nanocrystalline Silicon Films for Conductive-Bridging Resistive Random-Access Memory ApplicationsPredicting Equation of Transient Position-Probability Density for Nano-Tunnel Problem in SETPerformance Evaluation for Dynamic Voltage and Frequency Scaling Using Runtime Performance CountersMonte-Carlo Analysis of a New 6-T Full-Adder Cell for Power and Propagation Delay Optimizations in 180nm ProcessAnalysis, Selection and Control of Optimal Driving Current Combinations in Wavelength Switching for DBR LasersAn M-Z Interferometer Coupled with a Ring Resonator for SensingA Three-Dimensional Position System Using Digital TDE Receiver and Cylindrical Array AntennaAnalysis and Signal Recovery of Modulated Wideband Converter with Gain MismatchBehavioral Modeling and Design of Predistortion for Wireless Transmitters with Multi-Branch RF Power AmplifierDesign and Implement of Multi-Antennas for High Data Rate CommunicationDesign of DDS-Like Clock Generator Using Bidirectional IntegrationA Cooperative Relay Scheme Based on Constellation ExpansionErgodic Channel Capacity of MIMO Transmission in Spatial Correlated-FadingEstimation of OFDM Carrier Frequency Offset Robust to Offset VariationHigh Gain and Low Noise Single Balanced Wireless Receiver Front-End Circuit DesignPartition-Based Hybrid MIMO Decoding Schemes with Combined Depth- and Breath-First SearchThe Performance Comparison of Sub-1GHz Wireless Personal Area Monitoring SystemsA Cluster-Based Countermeasure against MAC Layer Attacks in IEEE 802.11 MANETsA Study of Bipolar Walsh-Hadamard Coding Method in Optical CDMA NetworksA Study of Modified Prime Codes Optical CDMA for Wired-Wireless SystemOptimization Algorithm of the Repeaters Distribution by Square and Cellular ModelA Tracking System with Location-Based Delivering for Reducing Short Message TransmissionsRobust MVDR Estimation via Polynomial Rooting for MC-CDMA Carrier Frequency OffsetAn Incentive Mechanism Using Game Theory for Wireless Mesh NetworksCell Planning for Base Station in Mobile Communication Using an Improved Genetic AlgorithmDesign of a LED Module with Special ConstraintDesign of an Optical Mechanical System for High-Resolution EncodersDesign of Precise Lightweight MirrorDesign of the Light-Emitting Diode Vehicle Projector Headlamp System without ShieldDevelopment of a Light Guide Film with Optimal Design and Roll to Roll Microfabrication TechnologyDynamic Throughput Optimization in Wireless Multi-Hop NetworksError Analysis of Ray?s Light Path for Axis-Symmetrical Optical System by Using Skew Ray TracingField Distortion Compensation for Galvanometric Scanning MachinesGateway Placement under the Consideration of the Starvation of TCP Flows in Wireless Mesh NetworksHARQ Performance Analysis in IEEE 802.16m SystemHigh Efficient Color-Separation BacklightHigh-Sensitivity Sensor Using Frequency Sweeping Generated Ringing Effect in Single-Mode Fiber-LoopsInteractive Design and Simulation for Luneberg LensesThe Effect of the Broken Edge on the Concentricity of the Micro-Polished Optical Fiber End-FaceA Field Emission Light Source Using Reflective Metal Groove Anode and Long Narrow Stripe CathodeTrim Down Redundant Transmission in Data SynchronizationTime-Efficient Route Optimization in PMIPv6Throughput Analysis for IEEE 802.11e Enhanced Distributed Channel AccessThe Yellow-Ring Measurement of White LED by the Reflective Lightspot Method (RLM)The Telescope Primary Mirror Isostatic Mount Bonding Position AnalysisThe Optical Response of Trapezoidal Comb-Like NanostructuresThe Effect of the Different Core Layer on Polymer Asymmetric Bragg CouplersThe Convergence Rate on Distributed Network Utility Maximization in Wireless Mesh NetworksThe Characteristics of All-Optical Switching and Modulation in Phenoxy-Phthalocyanines LiquidSymmetric NAT Traversal Method for Session Initial Protocol (SIP)Simulation of Thermal-Optical Effects on a PMMA Fresnel Lens Used in Solar ConcentratorsRSVP Extensions for Mobility Management in Heterogeneous WLAN/WiMAX NetworksPerformance Analysis of Reactive FHCoP-B in Nested Mobile NetworksPerformance Analysis and Improvement on SIP-Based VoIP ServerPartial Bit Strings Pruning Channel Assignment in Multi-Rate Multi-Channel Wireless NetworksPacket Loss Concealment Using Dual-Side Waveform Similarity Overlap-and-AddNear-Infrared Electro-Optics Modulation Coding Technology Using the Aperture Module with the Changeable StopMultimode-Interference-Based Waveguide Crossing in Two-Dimensional Cubic Photonic CrystalMulti-Colored LED Control System Implemented in Programmable SoC with Subset of DMX512 SpecificationMicrosphere Coupled Mach-Zehnder Interferometer for Biochemical SensorMeasurement and Analysis of Loss for Long-Period Photonic Crystal Fiber GratingsLED Color Mixing Mechanism DesignConfidential Enhancement with Multi-Code Keying Reconfiguration over TS/WH OCDMA NetworksDistributed TXOP Allocation Scheme in IEEE 802.11e Wireless LANsMeasurement and Simulation of System Performance of Digital Broadcasting SystemA Generalized Frame-Level FSBM FLSA ArchitectureAn Efficient Heuristic-Based Algorithm for Path Tracking Using Wireless SignalsAn Improvement to Tree-Structured Vector QuantizationApplication of Evolutionary Programming for Switch Strategy Decision of Distribution Systems with Load VariationsHydraulic System Fault Diagnosis Based on EMD and Improved PSO-Elman ANNThe Dynamic LMS for Line Echo CancellationUse of the Fuzzy-Based Taguchi Method for the Optimization Design of an Ultrathin Centrifugal Fan3D Angle Searching System with PSO for Face Recognition3D Image Encryption Using Integral Imaging Scheme and MLCA TechnologyA Coded Digital Watermarking Recognition Using Neural Network MethodA Forward Moving Method for Continuous Nearest Neighbor QueriesA Memetic Algorithm for Mixed-Integer Optimization ProblemsA Multi-Criteria Image Quality Evaluation SchemeA New Algorithm Based Orthogonal Arrays for Design of Experiment on Nonlinear FunctionsA New Evolution Algorithm: Cultural Evolution Algorithm for Global OptimizationsNovel 3-D Image Encryption Using Computational Integral Imaging and Linear-Complemented MLCAA Novel Region-Based Approach for Automatic Road Extraction from High Resolution Satellite ImagesA Real Time Hand Gesture Recognition System Based on DFT and SVMAn Algorithm of the Misconception OrderAn Efficient Genetic Encoding Scheme for Multiplierless Color Space Converter DesignAn Efficient Neural Network Model with Taylor Series-Based Data Pre-Processing for Stock Price ForecastAn Efficient Secret Image Sharing SchemeAn EigenMLLR-Like Eigen-FLS Approach for Speech Pattern RecognitionAutomatic Facial Aging/Rejuvenating Synthesis MethodAutomatic MIDI Genre ConversionChinese Semantic Word-Formation Analysis Using FKP-MCO Classifier Based on Layered and Weighted GEDBuilding a Post-Search Academic Search Engine Based on a Serial of Clustering MethodsBuilding a Multi-Classifier System in a GA-Based Learning EnvironmentCombined Probabilistic and Possibilistic Used to a Build Type-2 Fuzzy Clustering Algorithm ModelData Mining Based Intelligent System for Voting Behavior AnalysisDetection of Content-Aware Image Resizing Using Seam PropertiesEfficient Hardware Architecture for Kernel Fuzzy C-Means AlgorithmEnhanced Artificial Intelligence Algorithm for Optimal Unit Commitment ProblemEstimation of Distribution Algorithms with Matrix Transpose in Bayesian LearningExploring the Factor Effect of Learning Vector Quantization in Artificial Neural NetworksFast Depth Generating Algorithm From Binocular ImagesFlower Image Recognition Using Multi-Class SVMHigh Order Lambda Measure Based Choquet Integral Composition Forecasting ModelHigh Resolution Time-Frequency Analysis Base on Ricker Atom Matching Pursuit DecompositionHuman Body and Body Part Movement Analysis Using Gyroscope, Accelerometer and CompassHuman Hand Movement Analysis Using Principle Component Analysis ClassifierImage Segmentation Based on Poisson EquationImperialist Competitive Algorithms with Perturbed Moves for Global OptimizationUnsupervised Mining of Visually and Temporally Consistent Shots for Sports Video SummarizationTheoretical Approach to Reduced Q-Matrix for Cognition DiagnosisSolve the Routing Optimization Problems with Foraging Game TheorySignificant Features Selection Resistant to Temporal DistortionsRobust Image Process of Corresponding Lines Using Moving-Window MethodReversible Data Hiding Exploiting Coefficients Histogram in Wavelet Transform DomainResearch on Cellular Artificial Bee Colony Algorithm and its Computational ExperimentsPareto Ensembles for Evolutionary Synthesis of Neurocontrollers in a 2D Maze-Based Video GamePalmprint Verification for Images Captured in Peg-Less ScenariosNon-Uniform SURF Feature Point Detection and MatchingMoments and Parametrizing Construction for 3-Band Biorthogonal Scaling CoefficientsMacro Segmentation and Content Analysis of TV Broadcast StreamLane Detection and Predicting Algorithm Based on Randomized Hough TransformLemK_MSA: A Multiple Sequence Alignment Method with Sequence Vectorization Based on Lempel-ZivA Web-Based Android Supervisory Control SystemA Web-Based Arduino Supervisory Control SystemAn Efficient Control System for Combating Cybersickness in the Elderly within a Virtual StoreDesign and Realization of Smart Objects-Search System Based on RFIDHardware/Software Co-Design of 2D-to-3D Video Conversion on FPGAStudy on Communication Protocol Application in Smart GridA Design of Smart Dressing SystemA Flexible and Scalable Cooperative Surveillance Technique Using Integrated Ontology ReasoningA Functional Test Bed for Producing Virtual Human's Human-Like Movement Based on Limited PerceptionA Modified Least Significant Bit Embedding with Error CorrectionA New Front-End Anonymity and Back-End Real-Name Mechanism in e-CommerceA Novel Optimal Routing Strategy for Internet of Things? Machine-to-Machine Network under Time ConstraintA Preliminary Study on Non-Intrusive User Authentication Method Using Smartphone SensorsA Proposal for a Schema for ARP Spoofing ProtectionA Security and Efficiency of Authenticated Key Exchange Protocol for Wireless Mobile Ad Hoc NetworksA Study of Cloud Computing Based Intelligent Scheduling System for Manufacturing QualityA Term Matching Strategy for Item-Banks IntegrationNeighbor-Index Method for Continuous Window Queries over Wireless Data BroadcastA Uniform and Coherent Mashup Technique Based on the OSGi FrameworkAn Adaptively-Guiding Web-Based E-Learning System Based on Competency-Based Learning TheoryAn Annotation Watermarking Approach to Image Tagging for Relevant Information RetrievalAn Efficient Game Level Generation in Web-Based Serious GameAn Efficient Partitioning for Object-Relational Data WarehousesAn Experimental Platform for Cross-Language Document RetrievalAn Implementation Model of RFID Information Security and PrivacyAn Innovative but Low-Cost E-Payment Mechanism and its Extension to E-Ticketing and E-Identity Document ApplicationsAnalysis and Design of Semantic Web Services Using MDA and SBC StructureAnalysis of Convective-Radiative Fins by Using Hybrid Spline Difference MethodAnalytic Network Process Decision-Making to Downloadable Content SystemAnnotation System for the Construction of Synchronous Grammar Tree Alignment RelationshipsClassification of Photovoltaic Research Papers by Using Text-Mining TechniquesCloud Based Evolution Algorithm with Feedback Control for Emergency LogisticCluster Search Engine Results with Crowd IntelligenceCryptanalysis and Improvement of a Unique Batch Authentication Protocol for Vehicle-to-Grid CommunicationsDefend a System against Keyloggers with a Privilege-Limited AccountDesign and Implementation for the Secure ID Management System Based on VirtualizationDesign and Implementation of a Low-Cost Scalar Multiplier-on-Chip for Elliptic Curve CryptosystemDesigning and Realizing of UAV Simulation SystemEfficient Book Recommendation System Based on a MapReduce ModelEnhancement of Consistency of UML Diagrams by Cross Checking RulesExpansion-Free Grayscale Image Sharing Using Meaningful Share ImagesExploiting Mobile Devices to Assist Identification System of Photos for Social RelationshipFull Multiplexers Implementation of Dual Basis Multiplier over GF(2m)GPU Computation for Online Realtime Multi-Pattern MatchingHow to Enhance MIFARE System Security in the Current Crypto-1 Broken StatusImplementation of Internet Audio Transmission System via Clock CorrectionImproved on Date Attachable Electronic CashiTagger: Part-of-Speech Tagging Based on SBCB Learning AlgorithmJokerBot ? An Android-Based BotnetWeb-Base Virtual Collaboration in E-Learning SystemVoice Communication Network Quality of Service Estimation and Forecast Based on Cloud ModelVisualization of Nanomanipulation Using an Interactive Virtual EnvironmentVirtual Prototype Design and Test-Simplifying the CAD/Analysis InterfaceVideo Query Using Temporal Signature and Similarity MatchingVideo Quality Adjustment Model Supporting Mobility for Seamless Multimedia Service DeliveryTile-Based Panoramic View in Mobile DevicesThree Dimensional Vision Conversion Based on Cloud ComputingShoulder-Surfing Resistant Smartphone Authentication Scheme Using Virtual JoystickSecurity of Cloud Computing Lightweight Authentication ProtocolResearch on Sequence Query Processing Techniques over Data StreamsResearch on Domain Ontology-Based Concept Similarity CalculationReliable Detection of Histogram Shift-Based Steganography Using Payload Invariant FeaturesProven Security and Efficiency of Gap Diffie-Hellman Group Blind Signature in E-CommercePerformance Evaluation of a Hadoop-Based Secure Cloud PlatformMulti-Clouds Framework for Enterprise Application Integration with Intelligent AgentsManagement of Abstract Algebra Concepts Based on Knowledge StructureLSO-AdaBoost Based Face Detection for IP-CAM VideoL-System Controlled Music Expression through Visual Language FrameworkComputer Assisted Language Learning and Gray Model for Promoting Phonics Learning in Continuing EducationE-Learning Interface ManagementTemporal Navigation in a Session in a Mobile Distance Learning SystemLearning for Shadow Puppet?s Action Control Inverse Kinematics MethodAn Illustration of Low-Cost and Intuitive Innovation Challenging Long-Standing Industrial Standards and PracticesAnalysis of Professional Competence Required by the Wind Energy Industry PractitionersApplication of Systematic Innovative Method to Improve the Structure of Magnetorheological DamperDodge-Romig LTPD Single Sampling Plan under Quality Investment and Inspection ErrorIdentifying Constraints Regarding Power Usage Effectiveness for Data Centers Engaging in Demand Response ProgramsLong-Term Unit Commitment Solution Based on Load PatternMulti-Dimensional Assessment for Residential Lighting Demand Side Management: A Proposed FrameworkA Decision Support System for the Operation of Vending Machine Supply Chains with Product Substitution and Varying Vehicle SpeedA Discussion on the Impact of the Integration and Splitting Models on the Operational Efficiency of Medical Centers in TaiwanA Genetic Algorithm for Improving Efficiency of PERTA Study of Design Demand of Applying Quality Function Deployment in Plastic Folding ChairsA Systematic Approach to Quality Function Deployment with Extension MethodAn Enterprise Architecture Approach Based on DoDAFApplication of PLS-SEM to Assess the Influence of Construction Resources on Cost OverrunBuilding a Maturity Model of Information Security Governance for Technological Colleges and Universities in TaiwanConstruction of System Dynamics Model on Service Strategy and Resource ManagementEfficiency Improvement for Multi Depot Vehicle Routing: A Case Study in Cash DistributionEvaluating and Benchmarking Productive Performance of Shipping CompaniesImproving Operability of SmartUAV in Navigable Airspace of KoreaIntelligent Decision-Making on Modular Products Using Fuzzy AlgorithmsThe Study on the Functional Element Representations for Bicycles with Creative CharacteristicsSupply Chain Pricing Strategy for Short-Lived Ramp-Type Demand ModelsResearch on Optimized Problem-Solving Solutions Selection of the Production ProcessOptimizing Bi-Objective Imperfect Preventive Maintenance Model for Multi-Component System Using a Proposed Improved PSO AlgorithmMultiprocessor Flow Shop Scheduling Problem with Common due WindowMeasuring the Capability for One Process with Spherical Tolerance
