Buch, Englisch, 1620 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 3000 g
ISBN: 978-3-03835-479-6
Verlag: Trans Tech Publications
Autoren/Hrsg.
Weitere Infos & Material
Foreword, Organizing Committee, Editorial Board and Keynote Speakers
Chapter 1: Additive Manufacturing Research
Melt Flow Index of Recycle ABS for Fused Deposition Modeling (FDM) Filament
A Study on Melt Flow Index on Copper-ABS for Fused Deposition Modeling (FDM) Feedstock
Investigation of DLP Projector as an Energy Light Source to Cure Silver Conductive Ink
Chapter 2: Advances in Mechanics
Surface Tension Effect on Sound Absorption Characteristics of a Cavity-Backed Semi-Permeable Membrane
Properties of Steel Fiber Reinforcement Concrete with Different Characteristic of Steel Fiber
Theoretical Modelling of Plate with Attached Vibration Absorber
Information Structure of STEP Convertor of STEP-CNC Mapping System
Perforated Impact Strength of Woven Kenaf Fiber Reinforced Composites
Oblique Perforated Impact Strength of Woven Kenaf Fiber Reinforced Composites
Analysis of Sound Produced by a Traditional Malay Musical Instrument “Kompang”
Constant Amplitude of Prestressed Concrete Sleeper (PCS) Subjected to Three Coaches Train
Accelerometer Performance for Maker Faire Quadrotor with Kalman Filtering Using PID Controller
Novel Straight Type Aortic Cannula with Spiral Flow Inducing Design
The Study on Whole Body Vibration Exposure Induces Low Back Pain among UTHM Bus Drivers
Analysis of Vibration Effects on Floor of Office Building due to Ground Vibrations from Passing Vehicles
Steel Ball System Control Using T-S Type Fuzzy Logic
A Comparative Study of Reassigned Conventional Wavelet Transform for Machinery Faults Detection
Time Frequency Analysis for Blade Rub Detection in Multi Stage Rotor System
Integrating and Utilizing AHP and GIS for Landfill Site Selection
Bolts Gauge Effect on the Face Bending Behaviour of Concrete-Filled Hollow Section for Hollo-Bolted Connections
Crashworthiness Behavior of Hollow Al-Based Functionally Graded Material (FGM) Box under Quasi-Static Loading
Green Strength Optimization in Metal Injection Molding Applicable with a Taguchi Method L9 (3)4
Characterisation of Ti-6Al-4V Reciprocating Sliding Wear Test Behaviour
Axial Energy Absorption of Kenaf Yarn Winding Cylindrical Composites
Effect of Mechanical Mismatch on the Stress Intensity Factors of Inclined Cracks under Mode I Tension Loading
A Review on Effect of Orientation Fabric on Mechanical Energy Absorption Natural Fibres Reinforced Composites
Vibration Condition Monitoring: Latest Trend and Review
Detection of Twisted Blade in Multi Stage Rotor System
Challenges for Kenaf Fiber as a Reinforcement: A Review
Integration of Artificial Intelligence into Dempster Shafer Theory: A Review on Decision Making in Condition Monitoring
Effect of Beating Process to Soda Anthraquinone Pulp of Oil Palm Male Flower Spikes Fibre
Position Control Mathematical Modelling and Operational Evaluation of Tele-Operated Electro-Hydraulic Actuator (T-EHA)
Characterisation of Plasticity Response for Reciprocating Sliding Wear Test of Ti-6Al-4V under Variables Number of Cycles
Green Density Optimisation with Sustainable Sewage Fat as Binder Components in SS316L Feedstock of Metal Injection Moulding Process (MIM) by Taguchi Method
Condition Monitoring of Variable Speed Worm Gearbox Lubricated with Different Viscosity Oils
Investigation on the Effect of Linear Kinematic Hardening Model on Plasticity Prediction of Reciprocating Sliding Contact
Modelling and Simulation of Flexible Beam as Aerator to Generate Dissolved Oxygen in Water
Finite Element Modelling of Fixed-Fixed End Plate Attached with Passive Vibration Absorber
Synthesis and Characterizations of SiO2-Ag Core-Shell Nanostructure Using Fatty Alcohols as Surface Modifiers
Condition Monitoring of Industrial Gas Turbine Critical Operating Parameters Using Statistical Process Control Charts
Effect of Porous Materials Combination in Layers on Sound Absorption Characteristics
Improving Surface Smoothness of Aluminium Alloys Multi-Bead Weld for Welding Rapid Forming Application
Reassessment of Remaining Strength of Subsea Corroded Pipeline Using Bayesian Updating
Hydrothermal Synthesis and Characterizations of MOF-199 Using Renewable Template
Comparison between SAC405 Lead-Free Solders and EN(P)EPIG and EN(B)EPIG Surface Finishes
Effect of Pin Size on Reciprocating Sliding Wear Test of Ti-6Al-4V
The Acoustical Characteristics Analysis on Different Type of Natural Fibres
A Preliminary Study on Acoustical Performance of Oil Palm Mesocarp Natural Fiber
Parameter Optimization of Preheating Method on Aluminium-Stainless Steel Metal Inert Gas (MIG) Dissimilar Welding
A Comparison for the Simulation of Frictionless Contact Problem with Large Displacement
Prediction of Elastic Properties for Unidirectional Carbon Composites: Periodic Boundary Condition Approach
Feasibility Study: Investigation of Polymer Nano-Composites (PNC) Material for Biomedical Application via Fused Deposition Modelling (FDM) Routes
The Effects of Heat and Compression on Moisture Content and Water Absorption of PALF/Sugarcane Bagasse Composition in Disposable Plate Production
Weight Minimization of Helical Compression Spring Using Gravitational Search Algorithm (GSA)
Fatigue Strength of High Strength Steel Sheets Joined by Hemming Process
Hydroxyapatite Extracted from Waste Fish Bones and Scales via Calcination Method
Characterization of Carbon Brush from Coconut Shell for Railway Application
Chapter 3: Fluid Mechanic and Heat Transfer
Natural Convection Heat Transfer in Two-Square Duct Annuli Filled with a Nanofluid
Bubble Nucleation and Growth of Dissolved Gas in Solution Flowing across a Cavitating Nozzle
An Experiment Investigation of Film Cooling Effectivenes of Sister Hole of Cylindrical Shaped Hole Film Cooling Geometry on a Flat Plate Surface
Increasing Draining Capacity for Overloaded Sewers during Flooding by Means of Polymer Addition
Numerical Analysis of Laser Preheating for Laser Assisted Micro Milling of Inconel 718
CFD Analysis of Industrial Multi-Stage Impeller in Stirred Tank with Fractal Pattern Baffled and Impeller
Experimental Investigation of Heat Transfer in Ribbed Microchannel
Comparison of RANS and U-RANS for Flat Plate Film Cooling
Numerical Simulation on End Suction Centrifugal Pump Running in Inverse Flow for Microhydro Applications
Numerical Study of Flow Separation and Pressure Drop for Flow Past Staggered Tube Bundles
Radiation Effects on Two-Dimensional MHD Falkner-Skan Wedge Flow
Parametric Study on Geometrical Arrangement of Sister Hole
The Effect of Radiation on Free Convection from a Heated Horizontal Circular Cylinder
Design for Two-Fluid Fine Nozzle with 50% Fill Ratio
Experimental Study on Film Cooling Effectiveness of Shallow Hole with Upstream Sister Holes
Effects of Geometrical Parameters to the Performance of Louvered Fin Heat Exchangers
Determination of Mist Flow Characteristic for MQL Technique Using Particle Image Velocimetry (PIV) and Computer Fluid Dynamics (CFD)
Heating and Cooling of an Aluminium-Cased Parallel Flow Microreactor for Steam-Methane Reforming
Chapter 4: Energy and Combustion
Fundamental Study of Dual Fuel on Exhaust Gas Recirculation (EGR) Operating with a Diesel Engine
Study on Particulate Matter of Diesel Engine Using Waste Cooking Oil
Evaluation of Diesel Engine Performance and Exhaust Emission Characteristics Using Waste Cooking Oil
Review of Performance and Emmissions Characteristics of Bio-Additive Fuel on SI Engine Fuelled by Biopetrol
Influences of Intake Temperature and Bio-Petrol Fuel Temperature on SI Engine: An Overview
The Effects of Voltage Flow and pH Value in Alkaline Electrolyser System to Performance
Influence of Ag on Chemical and Thermal Compatibility of LSCF-SDCC for LT-SOFC
Effects of Nozzle Shape on the Flow Characteristics of Premix Injector Using Computational Fluid Dynamics (CFD)
The Storage Effect on Fuel Properties and Emission for Variety Biodiesel Blends
The Development of Wave Energy Conversion Device to Generate Electricity
Experimental Investigation on Ethanol-Petrol Blends Operating with a Petrol Engine: An Overview
Review on Typical Ingredients for Ammonium Perchlorate Based Solid Propellant
Review on Restructuring of Malaysia Electricity Supply Industry
Generation Revenue Assessment in Malaysia Electricity Supply Industry
The Effect of Storage Container and Light Exposure on Biodiesel Characteristics Derived by Crude Palm Oil
Effects of Fuel Additive on Performance and Emissions Characteristics of Diesel Engine Fuelled by Biodiesel Derived from Palm Oil
Spray Characteristic of Rapid Mixing Jatropha Oil Biodiesel in Burner System
Effects of Temperature and Ambient Pressure on Spray Characteristics of Biodiesel Combustion
Study of Schlieren Optical Visualization Basics Technique and the Principle
Performance of Two-Chambered Microbial Fuel Cell (MFC) at Different pH Anode Microenvironment Using Palm Oil Mill Effluent (POME) as Substrate
Dynamic Behavior of Rapeseed Oil Spray in Diesel Engine
Experimental Investigation of Standard Handling and Storage Duration on Fuel Properties, Appearance, Burning Process and Emissions of Biodegradable Alternative Fuel
Experimental Study of the Ignition Process and Combustion of Biodiesel-Water-Air Rapid Mixing Derived from Waste Cooking Oil, Crude Palm Oil and Jatropha Oil in Burner Combustion
Application of Schlieren Optical Visualization System in External Combustion and Internal Combustion Engine: A Review
Emission and Performance Characteristic of Biodiesel Burner System: A Review
Optical Technique Using Nano-Spark Lightsource for Macro and Microscale Image Acquisition to Study Diesel Spray Atomization
A Review on Knock Phenomena in CNG-Diesel Dual Fuel System
Modeling of Common Rail System and Constant Volume Chamber in Biodiesel Combustion: A Review
The Production and Comparison of Fuel Properties on Biodiesel with Alternative Fuel: A Review
Analysis of Emulsified Renewable Fuel Injector in Burner Combustion: An Overview
Effects of Nozzle Diameter on the Spray Characteristics of Premix Injector in Burner System
Aerodynamic Analysis on Proton Preve by Experimental
A Review Paper on Simulation and Modeling of Combustion Characteristics under High Ambient and High Injection of Biodiesel Combustion
Effect of Nozzle Angle to Combustion Characteristic in Biodiesel Burner
Study on Spray Characteristics of Biodiesel using a Rapid Compression Machine
Application of Injector-Volume Ratio Values in the Development of a Fuel Injection Controller
Analysis of Combustion Characteristics of Waste Plastic Disposal Fuel (WPDF) and Tire Derived Fuel (TDF)
Study and Analysis by Numerical Simulation of a Solar Continuous Adsorption Chiller
Numerical Analysis of Nozzle Hole Shape to the Spray Characteristics from Premix Injector in Burner System: A Review
Chapter 5: Nanoelectronic Engineering
Effects of Sn Dopant on Structural and Optical Properties of ZnO Thin Film Prepared by Sol-Gel Route
Photon-Assisted Electrodeposition of -n-ZnO/-p-Cu2O Photovoltaic Devices with TiO2 Intermediate Layer
Seeded Porous Silicon Preparation as a Substrate in the Growth of ZnO Nanostructures
Preparation of Nanostructured Fluorine Doped Tin Oxide (FTO) by Hydrothermal Method
Direct Growth of Copper(II) Oxide (CuO) Nanostructures Films via One-Step Chemical Bath Deposition by pH Variation
The Fabrication of PSi/ZnO Nanostructures as Chemical Sensors for the Detection of Ethanol in Solution Using an Electrochemical Impedance Technique
Effect of Annealing Time of TiO2 Thin Film Deposited by Spray Pyrolysis Deposition Method for Dye-Sensitized Solar Cell Application
Effect of Deposition Temperature on Surface Morphology and Electrical Properties of Fluorine Doped Tin Oxide (FTO) Thin Film by Spray Pyrolysis Technique
Influence of Oxygen Flow Rate on the Characteristics of the Tungsten Oxide Using RF Magnetron Sputtering
Effects of Annealing Temperature of TiO2 Thin Film Deposited by Spray Pyrolysis Deposition Method for Dye-Sensitized Solar Cell (DSSC) Application
Influence of Different Solvents on the Formation of Uniform Titanium Dioxide (TiO2) Thin Film by Sol-Gel
Influence of Gd Doping on the Structural and Optical Properties of ZnO
Effect of Deposition Time on the Electrodeposited n-Cu2O Thin Film
Surface Morphology and Electrical Properties of FTO (Fluorine Doped Tin Oxide) with Different Precursor Solution for Transparent Conducting Oxide
Derivation of GdxZn1-xO Film: The Effects of Gd Concentration on the Structural, Morphological and Optical Properties
Dye Sensitized Solar Cell (DSSC) Performance Analysis Based on Series Circuit
Fabrication of Intrinsic Zinc Oxide-Coated, Aluminium-Doped Zinc Oxide Nanorod Array-Based Ultraviolet Photoconductive Sensors
Hydrophilic Indicates Surface Morphology Quality of TiO2/CdS Nanocomposite Film
Humidity Sensor - A Review of Nanostructured Zinc Oxide (ZnO) - Based Humidity Sensor
Influence of Oxygen Flow Rate on Sputter Deposition Rate and SEM Image of Copper Oxide Thin Films
2D and 3D Analyses of Metal Oxide Thin Films Examined by Atomic Force Microscope
Review on Immobilization of Nanoparticles for Fabrication of Glucose Biosensor
Rutile-Phased TiO Nanorods/Nanoflowers Based Dye-Sensitized Solar Cell
Preparation of Cobalt Doped DSC Using Spray Pyrolysis Deposition (SPD) Technique
Synthesis and Characterization of Gadolinium Doped Zinc Oxide Nanorods Thin Films
Optical Properties and Raman Scattering Investigation of Ag Doped ZnO Thin Film Prepared by Two-Step Solution-Based Deposition Method
Uniform Deposition of Titanium Dioxide Films by Chemical Vapor Deposition (CVD)
Chapter 6: Integrated Electrical and Electronic Engineering
Development of Programmable Integrated Circuit (PIC) Module with Multiple Outputs for Students Psychomotor Skill Enhancement
MIMO Antenna Performances on Microstrip Antenna with EBG Structure for WLAN Applications
Optimization in MATLAB for Cardiac Excitation Modeling towards FPGA Standalone Simulation Tools
Optimization of Single Phase E-Core Hybrid Excitation Flux Switching Machine
Performance Comparison of 12S-14P Inner and Outer Rotor Field Excitation Flux Switching Motor
Comparative Performance of FE-FSM, PM-FSM and HE-FSM with Segmental Rotor
Performance Analysis of 12S-10P HEFSM with Various Flux Bridges
Chapter 7: Industrial Engineering
Comparative Study of Small Office Layout Based on Amount of Communication and Knowledge Creation Behavior
Definition of Engineering Asset Management: A Review
Supply Chain Risk Management in Automotive Small and Medium Enterprises in Malaysia
Determinants of Risk Management Adoption in Organisations and Supply Chains
A Preliminary Study on the Learning Perspective at Malaysia's Government Technical Department
A Review of Ergonomic Tools and Apparatus for the Ageing Population
Cloud Computing Information System Architecture for Precast Supply Chain Management
An Efficient Approach to Processing Massive RFID Data in Supply Chain
Conceptual Model of Contractor Satisfaction in the Industrialized Building System (IBS) Implementation
Maintenance Organization at Universiti Tun Hussein Onn Malaysia (UTHM)
A Field Study on Urban Rail Transits in City of Kuala Lumpur: Passenger Views on Train Noise and Vibration
Evaluation of Whole Body Vibration and Back Pain Problem among Light Rapid Transit (LRT) Drivers
Frequent Route Map for Transit Users in Klang Valley, Malaysia
Operational Capability: The Missing Link between Supply Chain Practices and Performance
The Comparison of Travellers’ Attitude towards Public Transport: A Study on the Modal Share in Kuala Lumpur
Increasing End-of-Life Recovery Profit Using Axiomatic Design Principles: A Case of Mobile Phone Keypad
A Review of China's Technological Developments in the 20th Century
A Pilot Study of User-Requirements for Building Maintenance Systems in Malaysian Higher Education Institutions
Chapter 8: Engineering Design
SMA Actuated Finger Exoskeleton Device for Rehabilitation of Acute Paresis Patient
Development of Automated Control System for Kuih Penderam Stamping Machine
Design of Robot Head for Expression of Human Emotion
Review on Current Status of Waste Electric and Electronic Product in Malaysia
Chapter 9: Sustainable Construction
Cracking Propagation and Pattern Behaviour of Irregular-Shaped Polyethylene Terephthalate Fibre Reinforced Concrete Beam
The Strength Behavior of Self-Compacting Concrete Incorporating Bottom Ash as Partial Replacement to Fine Aggregate
Vehicle Induced Vibration on Real Bridge and Integral Abutment Bridge – A Short Review
Effect of Rubber Tyre Granules on Concrete Strength and the Microstructure Characteristics of Rubberized Concrete
Building Information Modeling (BIM): Exploring Level of Development (LOD) in Construction Projects
Behavior of Fire Exposed Concrete-Filled Double Skin Steel Tubular (CFDST) Columns under Concentric Axial Loads
Application of Building Information Modeling (BIM) in the Malaysian Construction Industry: A Story of the First Government Project
The Mechanical Properties of Steel-Polypropylene Fibre Composites Concrete (HyFRCC)
Connection Performance for LVL-Concrete Composite Floor System
Strength Development of Fine Grained Mortar Containing Palm Oil Fuel Ash as a Partial Cement Replacement
Performance of Rice Husk Ash as a Partial Cement Replacement in Fine Grained Mortar
Floor Dynamic Assessment on Laboratory due to Ground Borne Vibrations Using ModalV Analysis from Passing Vehicles
A Review on Abandoned Construction Projects: Causes & Effects
The Influence of Impressed Current on Residual Bond Strength of Corroded Structure
Car Driving Behaviour on Road Curves: A Study Case in Universiti Tun Hussein Onn Malaysia
Application of Building Information Modeling (BIM) in the Malaysian Construction Industry: A Story of the First Government Project
A Review of Ambient Vibration Technique on Bridges
Relevancy of Factors and Mitigation Measures in Controlling Time and Cost Overrun towards Malaysian Environment
Preliminary Qualitative Findings: Challenges in Large Infrastructure Projects towards Development of Innovative Performance Measurement
Optimization of Polyurethane Lightweight Aggregate with the Addition of Palm-Based Polyol
Fatigue Crack Inspection and Acoustic Emission Characteristics of Precast RC Beam under Repetition Loading
The Effects of TiO2 in the Performance of Mortar
Quantification and Mapping of Construction Waste Generation in Parit Raja
Low Cost Housing Demand Factors in Malaysia
Utilization of Palm Oil and Electric Power Plant Fly Ash Waste Material as a Clay Replacement in Bricks
Preliminary Overview on Thermal Performance of Green Roof
Technical Competency of Construction Manager in Malaysian Construction Industry
Chapter 10: Environment and Green Technology
The Effect on Leachability and Indoor Air Quality by Incorporating Waste Material into Fired Clay Brick
The Evaluation of Indoor Microbial Air Quality in Two New Commissioning Higher Educational Buildings in Johor, Malaysia
Potential of Utilizing Solid Waste Generated in UNIMAS West Campus
Adsorption of Lead Using Jackfruit Peel Activated Carbon
Membranes for Gas Separation Current Development and Challenges
In Vitro Inhibitory Assay of an Isolated Indoor Airborne Fungus from an Institutional Building of Computer Education by Using Potassium Sorbate
Methods Comparison for the Synthesis of Deca-Dodecasil 3 Rhombohedral (DDR3) Zeolite Crystals
Mn(II) Ions Biosorption from Aqueous Solution Using Pleurotus Spent Mushroom Compost under Batch Experiment
Cigarette Butts Pollution and Environmental Impact – A Review
Preliminary Test of Mining Wastewater Containing Iron (III) and Aluminium (III) on Scirpus grossus in Phytoremediation Process
Indoor Fungal Treatment by Using Potassium Sorbate as Bio-Resistance Coating for Different Plasterboard Wall Finishings
Preliminary Test of Hydrocarbon Exposure on Lepironia articulate in Phytoremediation Process
Preparation and Characterization of Green Porous Palm Shell Based Activated Carbon by Two Step Chemical Activation Using KOH
Fast Synthesis of Highly Crystalline ZIF-8 Using Microwave-Assisted Solvothermal Method
Modelling of High Pressure, High Concentration Carbon Dioxide Capture in Absorption Column
Pozzolanic Reaction Mechanism of Rice Husk Ash in Concrete – A Review
Overview of Leachability of Heavy Metals Using Solidification/Stabilization Method Incorporated with Agricultural Wastes
Removal of Important Parameter from Car Wash Wastewater - A Review
Effect of Particle Size Distribution to Remove Contaminants in Groundwater at Dengkil, Selangor
Use of Ferric Chloride and Chitosan as Coagulant to Remove Turbidity and Color from Landfill Leachate
Application of Phycoremediation Using Microalgae Scenedesmus sp. as Wastewater Treatment in Removal of Heavy Metals from Food Stall Wastewater
Kinetics Study of UASB and HUASB System in Treating Municipal Wastewater
Comparison of Zinc Roofed House Temperature Distribution between Open Water Exhausted with Radiator Cooling System
An Investigation into the Combustion of Mixed Fuel Consisting of Bituminous Coal and Crude Bio-Oil
Heavy Metal Concentration in Ambient Air University Campus Located near the Industrial Area
River Bank Filtration: Study of Langat River Water and Borehole Water Quality
Sustainable Extensive On-Site Constructed Wetland for some Bacteriological Reduction in Kitchen Greywater
Development of Temporal Rainfall Pattern for Segamat District
Removal of Nutrients and Selected Heavy Metals in Wet Market Wastewater by Using Microalgae Scenedesmus Sp.
Analysis by Pineapple Leaf in Chemical Pulping Process
The Management of Sustainable Development at Malaysian Local Government: Stakeholders’ Perception
Removal of Chemical Oxygen Demand (COD) from Domestic Wastewater Using Hybrid Reed Bed System
Removal of Zinc by Nano-Scale Zero Valent Iron in Groundwater
Temporal Analysis of Ozone and Nitrogen Oxides Fluctuations at Pasir Gudang, Malaysia
Cogon Grass as an Alternative Fibre for Pulp and Paper-Based Industry: On Chemical and Surface Morphological Properties
Activated Carbon from Honeydew Rind as an Adsorbent in Zinc Removal from Aqueous Solutions
The Study on Effectiveness and Flow Characteristic of Grassed Swale Drainage System in UTHM
A Review of Sustainable Management of Mine Tailings
Leachability of Self-Compacting Concrete (SCC) Incorporated With Fly Ash and Bottom Ash by Using Static Leaching Procedure (SLT)
Comparison of Distribution Methods of Low Flow Analysis for Bandar Segamat, Johor
Leachability of Self-Compacting Concrete (SCC) Incorporated with Fly Ash and Bottom Ash by Using Toxicity Characteristic Leaching Procedure (TCLP)
The Effect of Precipitation on Sediment Transport at Batang Padang River, Perak
Polishing of Chemical Oxygen Demand (COD) Using Moving Bed Bio-Reactor
Biosorption of Zn(II) in High and Low Strength Synthetic Wastewater by Watermelon Rind (Citrullus lanatus)
Effect of Liquid Flow Rate and Amine Concentration on CO2 Removal from Natural Gas at High Pressure Operation in Packed Absorption Column
Climate Change Impacts on Rainfall Distribution at Teluk Intan Catchment
The Progressive Response of Sahelian Dams to Sediment Intrusion: Case of Kano State between 1976 and 2009
Physical Characterization of Rhodococcus zopfii DSM 44108 Bacteria Isolated from Municipal Sludge
Experimental Study for Phycoremediation of Botryococcus Sp. on Greywater
Phycoremediation of Dairy Wastewater by Using Green Microlgae: Botryococcus Sp.
Survival of Pseudomonas putida for Biodiesel Blend (B20) in Soil Bioremediation
Hydrology Properties At Sembrong Dam Reservoir in Johor
Subsea Processing Equipment: A Strategy for Effective Assessment and Selection
Groundwater Eco-Distribution System for the Combination of SAT and Therapy-Electrolysis Methods
Model Development for Single Substrate Polycyclic Aromatic Hydrocarbon Biodegradation
Ammonia Nitrogen Removal from Domestic Wastewater via Nitrification Process Using Aerated Rock Filter
pH Effect on Phosphorus Removal in Synthetic Wastewater by Using Electric Arc Furnace Lab-Scale Filter
Stakeholder Influences and Environmental Management Practices in Fleet Operations – A Research Agenda
Evaluation of Different Biomedia Performance for River Purification: Preliminary Stage
Water Quality Study at Sembrong Dam Reservoir in Johor
Leachability of Self-Compacting Concrete (SCC) Incorporated with Fly Ash and Bottom Ash by Using Synthetic Precipitation Leaching Procedure (SPLP)
Identification and Expression of Ligninase Enzymes from Tropical Asia Wood Insect for Agro-Pulp Biodelignification: A Theoretical Framework
Coating Bio-Resistance Test of Different Wall Finishing for Isolated Indoor Fungal Treatment by Using Potassium Sorbate Biocide on Wood
A Theoretical Framework for the Analysis of Residential Solid Wastes Generation and Composition (SWGC) in Bauchi Metropolis, Nigeria
Chapter 11: Tropical Soil
Response of Single and Grouped Pile Subjected to Lateral Load in Cohesionless Soil
Effect of Geotextile Encapsulation on Lime Column Axial Stress in Pontain Marine Clay
Effect of Plasticity on Liquefaction Susceptibility of Sand-Fines Mixtures
Biocementation Potential of Tropical Residue Soil Infused with Facultative Anaerobe Bacteria
Geochemical Properties of Peat Soil in Sarawak - A Review
Strength and Stiffness of Artificial Organic Soil Admixed with Lime Zeolite
Effect of Sand Relative Density inside the Geotextile Pillow on the Bearing Capacity of Pad Foundation
Effect of Calcium and Sodium Ions in Soft Clay Using Electrokinetic Stabilisation Technique
Comparison of Geotechnical Properties of Laterite, Kaolin and Peat
Leachate Characteristics of Contaminated Soil Containing Lead by Stabilisation/Solidification Technique
Comparative Study of Stress-Strain Characteristic of Peat Soil
Theoretical and Actual Bearing Capacity of Driven Piles Using Model Piles in Sand
Comparison Study of the Dynamic Loading Characteristics between Peat and Sand Based on its Physical Properties
Consolidation Parameters of Reconstituted Peat Soil: Oedometer Testing
A Quantitative Review on Acceptance of Silent Piling Technology Among Designers in Malaysia
An Overview of Electrokinetic Remediation Assisted Phytoremediation to Remediate Barren Acidic Soil
Leaching Behavior of Lead Contaminated Soil Sample by Using Sugarcane Bagasse in Stabilization/Solidification Method
Mobilization of Pseudomonas putida in Kaolin Soil by Electrokinetic Bioremediation Technique
An Investigation of Soil Volume Changes at Four Dimensional Points of Peat Soil Sample in Parit Nipah and Pontian
Development of Continuous Surface Wave System for Stiffness Testing
Numerical Modelling of Prefabricated Vertical Drain for Soft Clay Using ABAQUS
Strength Characteristics Of Polyurethane (PU) With Modified Sand
An Investigation on the Effect of Calcite Bacteria Seeding on Shear Strength of Peat Soil via an Unconfined Compression Test
Bearing Capacity of Circular Footing on Sand Deposit
Groundwater Seepage Mapping Using Electrical Resistivity Imaging
Modelling of Clay Behaviour in Pile Loading Test Using One-Gravity Small-Scale Physical Model
Settlement Prediction of Soil at Closed Dumping area using Power Creep Function
Soil Velocity Profile on Soft Soil Using Seismic Refraction
Shearing Rate Effects on Research Centre for Soft Soils (Recess) Clay Using Cone Penetration Test (CPT)
Monitoring of Electric Current during Electrokinetic Stabilisation Test for Soft Clay Using EKG Electrode
Seismic Surface Wave Testing for Investigating the Shallow Soil Profile
