Buch, Englisch, 1480 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2800 g
Buch, Englisch, 1480 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2800 g
ISBN: 978-3-03785-933-9
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Foreword and Committees
Chapter 1: Advanced Mechanical and Manufacturing Design Technology
Nonlinear System Identification of Floating Structures Using Time-Varying ARX-Based Volterra Model
Fabrication Process of Polymer Nano-Composite Filament for Fused Deposition Modeling
Railway Dynamics Analysis Using Lego Mindstorms
Design and Enhancement of Radiofrequency Cannula (RC) for Chronic Pain Management
Topology Optimization of Beam Structures with Various End and Loading Conditions
Short Review: Role of Metal Oxides as Filler in Polysiloxane Sheet Composite
Occupant Kinematic Study in Safe Bus Superstructure
A Novel Design of Car Wiper Using Compliant Mechanism Method
CFD Application in Resistance Analysis for Advanced Semi-SWATH Vehicle
Thermo-Mechanical Stress Analysis in Electronic Packaging with Continuous and Partial Bond Layer
Evaluation of FDM Pattern with ABS and PLA Material
Ergonomic Design of CNC Milling Machine for Safe Working Posture
Micro-Scale Abrasion of WC-Based Coatings with Different Abrasive Type
Magnesite Effect to the Alumina Sintering for Heat Sink Application
Sintering of Alumina-AIN System for Heat Sink
Gravity Effects on the Density of Laminated Composite due to the Differences in Angle Cured
Water Absorption and Thickness Swelling of Laminated Composite after Cured at Different Angle
Simulation of Ironing Process for Earring Reduction in Sheet Metal Forming
Dimensional Accuracy Evaluation of Rapid Prototyping Fused Deposition Modeling Process of FDM200mc Machine on Basic Engineering Profiles
Tensile Properties of Angle Cured Laminated Composites Structures under Gravity Effects
Chapter 2: Alternative Energy and Green Energy
CFD Analysis of Circle Grid Fractal Plate Thickness on Turbulent Swirling Flow
Steady - State Potential Energy Recovery Modeling of an Open Cathode PEM Fuel Cell Vehicle
Techno-Economic Analysis of an Alkali Catalyzed Biodiesel Production Using Waste Palm Oil
Mono-Gas Fuelled Engine Performance and Emissions Simulation Using GT-Power
Influence of 1-Butanol Additives on Palm Biodiesel Fuel Characteristics and Low Temperature Flow Properties
Characterization of Blended Biodiesel Fuel Properties with Small Portion of Butanol as a Fuel Additive
Exergy Analysis of a Micro-Gas Turbine Fueled with Syngas
Unsteady Magnetohydrodynamic Free Convection Flow of a Radiative Fluid Past an Infinite Vertical Plate with Constant Heat and Mass Flux
Investigation of Evacuated Tube Collector Performance at High Temperature Mode Using TRNSYS Simulation Model
The Comparison of Preheat Fuel Characteristics of Biodiesel and Straight Vegetable Oil
Effects of Calcination Factors on the Composite Cathode Powder LSCF-SDC Carbonate by Using Dry Milling
Simulation and Optimization of a Stand-Alone Sustainable Renewable Energy System
Identification of Biodiesel Composites from Waste Cooking Oil Using Gas Chromatographic Method
Experimental Investigation of Thermal Conductivity of Paraffin Based Nanocomposite for TES
Numerical Simulation of Integrated Impingements Cooling Structure: Heat Removal at the Impingement and Pin Surfaces
Effect of Water Content and Tween 80 to the Stability of Emulsified Biodiesel
Synthesis and Property Study of Multi-Doped LaGaO3 for SOFC Application
Investigate Jatropha Oil as New Source of Lubricant Oil
Performance Study of Activated Carbon – Hydrofluoro Olefin Based Adsorption Cooling System
Performance Analysis of Photo Voltaic Trombe Wall for Tropical Climate
Lumped Components Modeling of Double Pass Solar Collector with Porous Matrixes
Experimental Investigation on Biodiesel-Ethanol-Diesel Blends Operating with a Diesel Engine
Mathematical Modeling for the Regenerator of Liquid Desiccant Air-Conditioning System
Biodiesel Production from Palm Oil in a Millichannel Reactor
Air Conditioner Unit with Thermal Energy Storage by Open Loop System
Design and Fabrication of a Dual Powered Mini Pelletizer
A Study of a Multi-Stage Downdraught Evaporative Cooling Device Using CFD to Assess the Effect of the Primary Inlet to Mixing Stack Area Ratio: Preliminary Work to Establish the Baseline Performance of the Device
Vertical Axis Wind Turbine with Magnetic Levitation Principle
Overview Effect of Biodiesel Storage on Properties and Characteristics
Review of the Investigation of Fuel-Air Premixing and Combustion Process Using Rapid Compression Machine and Direct Visualization System
Simulation Study on the Performance of Vertical Axis Wind Turbine
National Renewable Energy Policy and Action Plan: Highlights and Updates
Green Pedestrian and Cyclist way for Sustainable Campus: Case Study at Universiti Tun Hussein Onn Malaysia
Preheated Biodiesel Derived from Vegetable Oil on Performance and Emissions of Diesel Engines: A Review
Performance and Emissions of Preheated Biodiesel on a Compression Ignition (CI) Engines
A Review of the Concept of Fuel-Water Internally Rapid Mixing Injector in Burner System
Development of the Premixing Injector in Burner System
The Efficiency Enhancement on the Direct Flow Evacuated Tube Solar Collector Using Water-Based Titanium Oxide Nanofluids
Effect of Storage Temperature and Storage Duration on Biodiesel Properties and Characteristics
The Effects of Injection Parameters on the Performance of Common Rail Light Duty Engine Fueled with Palm Oil Biodiesel
Technical-Economic Analysis of Steam Double Effect Absorption Chiller-Heaters Equipped with Solar Heat Pipe System
Chapter 3: Aeronautical and Aerospace Engineering
Spin-Off Maneuvers of Flexible Satellite Using PD Based Constant-Amplitude Inputs
The Development of a Small Solar Powered Electric Unmanned Aerial Vehicle Systems
Numerical Simulation of a High-Aspect-Ratio Wing Using High Fidelity Aero-Structural Coupled Method
Two Dimensional Compressible Flow Analysis over a Generic Cruise Missile Model
On the Determination of Longitudinal Transfer Function of the Cessna - 182 Aircraft Model
Experimental Determination of the Moment of Inertias of USM e-UAV
Cost Analysis of a Hybrid Airship Vehicle for Cargo Delivery
Ground Viscous Effect on Aerodynamics of a Compound Wing with Different Reynolds Number
Chapter 4: Engineering Education in Mechanical and Manufacturing
The Importance of Programming Paradigms to Manufacturing Engineering Graduates: A Case Study from International Islamic University Malaysia Graduates
Development of Course Management and Monitoring System as a Quality Tools in Engineering Education
Design and Optimisation of Pressure Vessel Using Metaheuristic Approach
Chapter 5: Ecological Vehicles and Automotives
Investigation of Intake Flow Rate and Swirl Motion of Sl Engine
Analysis of Diesel Engine Performance Fueled with Waste Cooking Oil
Performance of Diesel Engine Operating with Waste Plastic Disposal Fuel
Design of New Ecological Combustion Engine with Double Potential Power Output
Study on Particulate Matter (PM) Emissions of Diesel Engine Using Palm Oil Methyl Ester
The Efficacy of Local Exhaust Ventilation (LEV) System Controls on Aerosols Exposures during Aluminium Cans Production
An Investigation of Supercharged Air Filter System on the Performance of a Spark Ignition Engine
Distribution of Two-Stage Direct Injection CNG-Air Mixture near Lean Limit Using CFD
Stress Analysis on an Automotive Crankshaft under Mixed Mode Loading
Chapter 6: Fluid Mechanics and Heat Transfer
Numerical Study of Turbulent Heat Transfer in Annular Pipe with Sudden Contraction
Leakage Detection in Pipeline Using Synchrosqueeze Wavelet Transform
Drying Characteristics of Several Agricultural Product: Effect of Drying Temperature
Numerical Investigation on the Effect of Down Stand Structure in Fire Compartment on Smoke Contamination Atrium Upper Balconies
Visual Study of Hollow Cone Water Spray Jet Breakup Process at Elevated Temperatures and Pressures
Meshless Local B-Spline Basis Functions-FD Method and its Application for Heat Conduction Problem with Spatially Varying Heat Generation
Recent Trends of Impingement Cooling System Enhancement for Gas Turbine
Pressure Drop and Heat Transfer Characteristics of Louvered Fin Heat Exchangers
CFD Study on the Effects of Nozzle Number on Turbulent Flow and Energy Separation in a Ranque-Hilsch Vortex Tube
Simulations on Modified Burner Configuration Using CFD
Experimental Investigation on the Effect of Orifice Diameter and Inlet Pressure to the Ranque-Hilsch Vortex Tube Performance
Effect of Nozzle Type on Spray Drift in Banding Application
Investigation of Flow Uniformity and Pressure Recovery in a Turning Diffuser by Means of Baffles
Two Phase Flow Modeling of the Interior Ballistics for a Naval Medium Caliber Gun with Guided Projectile
Heat Transfer Enhancement in Microchannel Using Nanofluids
Investigation of Phasing on Synthetic Jet Actuator Arrays
Tube Bank with Integral Wake Splitter Performance at Reynolds Number 5000 to 50000
Prediction of Particle Impact on an Archimedes Screw Runner Blade for Micro Hydro Turbine
Numerical and Qualitative Analysis of a Single Particle Behavior in a Shear Driven Flow in Equilateral Triangular Cavity
Experimental Study on the Effect of Different Speed Using Pin on Disc Tribotester
Effect of Baffle Opening Position to the Flow Distribution in a Servco Fume Cupboard
Simulation of Room Airflow Using Comsol Multiphysics Software
Mechanical Growth of Labyrinth Seal
Numerical Investigation of the Heat Distribution in an Annular Diffuser Equipped with Twisted Rectangular Hub
Investigation on Characteristics Behavior on Aerosol Spray at Exit Nozzle Based on ANSYS-CFX Simulation
Two-Phase Flow Interior Ballistics Model of Naval Large Caliber Guided Projectile Gun System
The Performance of Turning Diffusers at Various Inlet Conditions
An Assessment of Turbulence Models in Simulating a Synthetic Jet
Flow Separation Prediction in a Single-Phase Flow in an Inline Tube Bundles
Two-Phase Flow Pressure Drop Model for a Shell Side of a Shell of Heat Exchanger
Investigation on the Turbulence Models Effect of a Coal Classifier by Using Computational Fluids Dynamics
Heat Transfer of Aluminium-Oxide Nanofluids in a Compact Heat Exchanger
Chapter 7: Manufacturing Analysis, Simulation and Modelling
Influence of Manufacturing Process on Stress Distributions in Mechanical Parts
Drying Comparison of Nonhygroscopic and Hygroscopic Materials
Surface Integrity of a High Speed Milling FC300 Gray Cast Iron
Prediction of Mechanical Properties of Al-Based FGM Crash Box Fabricated by Heat Treatment Process
Hybrid Bat-BP: A New Intelligent Tool for Diagnosing Noise-Induced Hearing Loss (NIHL) in Malaysian Industrial Workers
Modelling and Simulation for Optimum Design and Analysis of Riser in Sand Casting with Experimental Validation
A Study of Energy Absorption Perfor
