Sonstiges, Englisch, Band Volume 1095, 1000 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
Sonstiges, Englisch, Band Volume 1095, 1000 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
ISBN: 978-3-03859-134-4
Verlag: Trans Tech Publications
The 192 papers are grouped as follows:
Chapter 1: Composites;
Chapter 2: Low-dimensional and Nano-Materials;
Chapter 3: Metal-based Materials and Alloys;
Chapter 4: Building and Construction Materials;
Chapter 5: Biomaterials and Technologies;
Chapter 6: Chemical Materials and Technologies;
Chapter 7: Material Testing, Characterization and Applications;
Chapter 8: Surface Engineering and Coating Technology;
Chapter 9: Materials Processing Technology and Applied Research
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Bauingenieurwesen Baukonstruktion, Baufachmaterialien
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde
- Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Technologie der Oberflächenbeschichtung
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Produktionstechnik
Weitere Infos & Material
Analysis of the Geometry and Microcracks of Kevlar/Epoxy CompositesEffect of Diamond Shape on Surface Roughness of Diamond/Cu CompositesEffect of Diamond Shape on Thermal-Physical Properties of Diamond/Cu CompositesEffects of Sintering Temperature on Microstructure and Wear Properties of Al2O3 Particle Reinforced Al CompositesPreparation of Nickel-Based Al2O3-TiB2 Composite Ceramic PowderThe Influence of Sintering Temperature and Whisker Content on the Flexural Strength of Aluminum Borate Whisker Reinforced Aluminum Phosphate Composite MaterialsThe Study of Composite Material of Al-C SystemAtomistic Simulation on Buckling Behavior of Monolayer GrapheneModeling and Simulation for Current-Illumination Characteristics of Carbon NanotubePreparation and Thermal Fatigue Behaviors of Silicon Nitride Nano-CeramicsStudy on Dispersion and Rheology of Particles in Water-Based Nano TiN FluidTransmission Performance of Water-Based Nano Fluid Based on Computational Fluid Dynamics?-Cyclodextrin Modified Hybrid Magnetic Nanoparticles as an Adsorbent for Phenol RemovalThe Preparation of ZrO2 and the Influence of the Calcination TemperatureThe Synthesis of Single-Crystal BiOI Nanoplates with {001} Facets ExposedA Study on Mechanical and Fatigue Properties of a Stainless SteelDevelopment of 590MPa Grade Hot-Dip Galvannealed DP SteelsEffect of Annealing Temperature on Microstructure and Damping Capacity of Twin Roll Cast ZK60 AlloyEffect of Ca and Nd Alloying on the Microstructure of Mg-6Al-Ca-Nd AlloyEffect of Cu on the Electrochemical Corrosion Behavior of Sn-8Zn-3Bi Lead-Free Solder AlloyEffect of Electropulsing Rolling on the Microstructure and Properties of Industrial Pure Titanium TA1Effect of Er on Microstructure and Hardness of Al-Zn-In AlloyEffect of Grain Size on Microstructure and Orientation of Fe-25Mn-3Si-3Al SteelEffect of Nd on Primary Silicon and Mechanical Properties of Hypereutectic Al-17.5%Si AlloyExperiment and Analyses on 16 Mn Steel under Cyclic Loading Controlled by StrainExperimental Study on the Effect of Retained Austenite on the Impact Toughness of a Low-Carbon Martensite SteelGalvanic Corrosion of 70-30 Copper-Nickel Alloy in Contact with Nickel-Aluminum Bronze in Simulated Deep Sea EnvironmentHigh Temperature Oxidation Investigation of Hot Roll Material with High-Speed SteelInfluence of Neodymium on Wear Resistance of Hypereutectic Al-Si AlloyInfluence of Pre-Deformation Strain on Recovery Performance of Ni47Ti44Nb9 Alloy F8mm Pipe JointInfluence of Solution Treatment on the Microstructure and Mechanical Properties of an Deformed Al-12.7Si-0.7Mg AlloyInvestigation on the Property of High Si-Al Alloy Prepared with Ultrasonic Vibration Aided Casting TechnologyIsothermal Crystallization Behavior of Cu42Zr42Al8Ag8 BMG Investigated with Electrical Resistance MeasurementLiquid-Phase Separation of Undercooled Fe-Cu-Si AlloyManufacturing Technology Research of Magnesium Alloy Transmission CaseMeasurement of TTP Curves of 7050 Aluminum Alloy by ConductivityMicromechanics Analysis of Elastic Modulus of Alumina-Carbon RefractoriesModification of Hypereutectic Al-20%Si Alloy by NeodymiumResearch on Heat Resistance of As-Cast Ferritic Nodular IronStudy on High-Temperature Mechanical Properties of SPHC Steel Produced by CSP TechnologyStudy on Microstructure and Property of High Boron Alloyed Stainless Steel Composite Plate Containing TitaniumStudy on Multi-Alloy Ingots Produced Using Hot-Top DC Casting ApproachTest and Research on Ratchet Effect of 16 Mn Steel under Cyclic LoadingThe Feature of Slag from Complex Hot Metal Blown by Converter Processing and its Influence on the CraftThe Phase Structures and Properties of Pt-Ir-M (M=Zr, Mo, Y) SystemDetermination of Al, Cu, Ni in Zr-Based Amorphous Alloy by Inductively Coupled Plasma Atomic Emission SpectrometryTi-Al-Zr-B-Y Amorphous Alloy Powders Prepared by Mechanical AlloyingComparison and Analysis of RC Beams Strengthened with FRP Bonded on the Side and Bottom SurfaceEffect of Basalt Fibers on Rheological Property of Asphalt MortarExperimental Research on Anti-Cracking Ability of Polyacrylonitrile Fiber MortarExperimental Study of Influences of Initial Temperature on Cement Grout PerformanceImpact of Composite Mineral Admixture on Carbonization Resistance of High Performance ConcreteInfluence of Layered Materials on Properties of Cement Stabilized MacadamInversion of Material Parameters of Composite Fiberglass Box StructureMechanical Properties of High Strength Desert Sand ConcreteNonlinear Structural Analysis of Fire-Exposed Reinforced Concrete ColumnResearch on Separation and Regeneration Aggregate of Recycled Asphalt Mixture Road PerformanceComprehensive Evaluation of Asphalt-Mixture Performance Based on Principal Component AnalysisA Comparison of Gelling Properties Stability of Dry-Heating and Maillard-Type Egg White ProteinsFabrication an Antibacterial Surface on Composite Porous ScaffoldInvestigation of the Surface Modification on Biomedical Magnesium AlloyNonenzymatic Glucose Electrochemical Oxidation Based on Pt Decorated MWCNTs-PVA Hybrid ElectrodeRSM as an Approach to Optimize Ginger Intermittent Microwave Drying ProcessStudy of the Degradation Behaviour of Biomaterial Mg-4.0Zn-2.0Sr Alloy in SBFSynthesis and Characterization of the Bio-Based OligomerThe Influence of the Addition Element of Zn and Sr to Degradation Behavior of Pure MagnesiumElectrospun Hydroxyapatite/BMP-2 Grafted PLLA Nanofibers for Guided Bone Rebuilding ScaffoldEffect of Dimethyl Sulfoxide (DMSO) on Cellulose Solution with High ConcentrationFlexible Graphene Paper as a Binder-Free Anode Material for Lithium Ion BatteriesHighly Selective Separation and Enrichment of Phosphopeptides by Uranyl-Salophen Immobilized Silica Gel MaterialInfluence of Co(ii) Ionic Liquids Catalytic System for Polycarbonate (CHO/CO2) SynthesisPreparation of Sodium Paeonolsilate Intercalated into Layered Double Hydroxides and its Release PropertiesPreparation of Zeolite from Waterworks Sludge for Ammonium Ion Removal in WastewaterRadical Polymerization of a Novel Methacrylamide DerivativeSimulation Study of the Volume Properties and Diffusion of 1-Butyl-3-Methylimidazolium Tetrafluoroborate/Ethanol MixtureSorption of Pb(II) on Iron Hydroxide Modified DiatomiteSynthesis and Application of the Three-Component Lyotropic Liquid CrystalSynthesis and Characterization of Thiol Functional Cyclic CarbonateSynthesis and Crystal Structure Hindered Amine with MethaerylateSynthesis of Hyperbranched Polyphenylacetylene Resins and the Influence of their Molecular Architecture on their PropertiesThe Application of Dye Materials on Efficient Visible Light PhotocatalysisBiomineralization-Inspired Synthesis for Hierarchical Structured ZnO Powders with Enhanced Potocatalytic ActivityEvolution of Phase Structure and Micro-Morphologies of the La0.7M0.3MnO3 (M=Ca, Sr) Sintered at Different TemperatureStudy of Salen(Al) Complex Catalytic System in Ring-Opening Polymerization of LactideConversion of Chitosan into 5-Hydroxymethylfurfural via Hydrothermal SynthesisDensity Functional Studies on the Standard Heats of Formation for Nitroaromatic MoleculesInfluence of Cadmium Oxide on Thermal Hazard of AP-CMDB PropellantsSwelling Kinetic Study of Poly(Vinyl Alcohol)/Poly(?-Glutamic Acid) Blend HydrogelAnalysis of Impact of Moisture Content on Rock Thermal Conductivity Coefficient Using TCS MethodEffect of Surface Treatment on the Stress Corrosion Cracking of 304 Austenitic Stainless Steels in Acid Chloride SolutionFatigue Properties and Fracture Characteristics of the Aluminum Alloys for High-Speed Train CarbodyInfluence of Predeformation on Mechanical Behavior of Hastelloy C-276Iron Temperature Field Finite Element Analysis and Measurement VerificationLifetime Estimation of Chain Plates for Floodgates Working in Seawater by Continuum Fatigue-Creep Damage Theory and Transient Analysis of Diffusion Process of HydrogenQualimetric Evaluation of Aluminum Wire Deformed by a Combined Scheme of Deformation ?Pressing-Drawing?Strength Testing of Fabric Composite Material and Impact Simulation for Airbag Landing SystemStudy of Influence Factors on Medium-Density Fiberboard Thermal AnalysisStudy on Testing Methods for Thermophysical Properties of MaterialsThe Estimation of the Thermal Properties of Refractory Materials According to the Temperatures Acceleration Curve at the Blast Furnace Blowing-InThe Evaluation of Absorption Performance of Magneto-Rheological (MR) ElastomerNon-Linear Finite Element Analysis on Rubber O-Sealing Ring of SRMPreparation Method and Device of Microcellular Sheet Based on Batch FoamingThe Effect of Laser Power Density on Laser Covered GrapheneElastic-Plastic Constraints Analysis for Hole-Edge CrackStudy on Phenolic Foams Modified by Graphene OxideExperimental Research about Polyester Viscose Seat Fabric Water and Oil Repellent FinishingAn Experimental Study of Compatibility for Metallic Inserts Bonded into CFRP Laminates Soaked in Aircraft FuelThe Method of Two-Dimensional Stretching to Reduce Residual Stress in Quenched Thin-Walled Aluminum AlloyApplication Reseach of Oriental Silicon Steel Sheet Used in the Table MotorInvestigation on Compression Properties of Syntactic Foam Reinforced by Warp Knitted Spacer FabricNew Aluminum Plated Corrugated Cardboard Material and ApplicationThe Lightweight Design and Simulation of Hydraulic Steel Gate with Metal Sandwich ConstructionMathematic Model of Liquidus Temperature in Quaternary Aluminum Phase DiagramResearch and Application of Model Materials Based on Soft Rock Model TestSoft Soil Subgrade Vacuum Preloading Consolidation Deformation Analysis of Large Rigid FoundationCompression Performance of Composite Stiffened Panels with Scarfed Holes and Scarfed Bonded RepairsLoading Tests of Thin Plates Made of Ultra-High Performance Concrete Reinforced by PVA Fibers and 2D Textile Glass ReinforcementErosion Study of Silica Phenolic Nozzles with Graphite Inserts in Solid Rocket MotorsStudy on Constitutive Equation of 7085 Aluminum Alloy under High Deformation TemperatureMicrowave Dielectric Properties of (Ca0.8Sr0.2)x(Li0.5Nd0.5)1-xTiO3 CeramicsA Comparison of the Complex Wettability between Locust and Moth WingAn Improved Indentation Method for Estimating Limits of Fracture Toughness in Brittle FilmsEffect of Y2O3 on Microstructure and Oxidation Behavior of Aluminide Coating on Ni-Based SuperalloyEffects of Nano Silver Film on the Hydrophobicity of Moth WingMicrostructures and Mechanical Properties of Aluminum Coating Produced by Friction Stir ProcessingNi-Cr-Al Coating Layer Modified by Friction Stir Processing - Analysis of Microstructure and Element DiffusionResearch on Induction Cladding Alloy Layer on the Surface of Steel Parts and its PerformanceResearch on the Modification of Water-Borne Inorganic Zinc-Rich Coatings and its PerformancesStudy on Macroscopic Morphology, Microstructure and Hardness of F313 Iron-Based Coatings Prepared by Laser Cladding Using Different Powder Feed RateThe Effect of Scanning Power on AISI 434L Stainless Steel-Based Composite Laser Cladding CoatingsThe Influence of CTAB Surfactant on the Dispersion of Al2O3 Particles and Deposition Rate of Electroless Ni-P-Al2O3 CoatingsThe Morphology in Film of Polystyrene-b-Polylactide after Temperature Annealing ProcessThe Role of Hierarchical Micro-Morphology in the Wetting Property of Moth (Geometrinae) Wing SurfaceStudy on Wear Mechanism of an AlSi?Hexagonal Boron Nitride Abradable Seal CoatingPreparation and Properties of Water-Based Ultra-Thin Fireproof Coating for Steel StructuresStructure and Field Emission Properties of CNx Powders Synthesized by a Polymerization ProcessA New Hot Stamping Process with Quenching and Partitioning TreatmentAnalysis of Microstructure and Mechanical Properties of 2A97T3 Al-Li Alloy Fiber Laser Welding JointAnalysis of Stress and Strain on Shaft Parts for Closed Type of Cross Wedge Rolling during Stretching StageAnalysis of Transverse Flatness Distribution of Steel Plate during the Quenching ProcessAnalysis on the Welding Thermal Field and Residual Stress of Thick PlateApplication Research of Hot Stamping Base on the Forming HistoryCalculation Method of Laser Spot Coincidence Degree of Laser Micro MachiningComparison of Stress Filed and Deformation of MAG and TIG for Cr13 Based on Finite ElementDevelopment and Application of Process Control System to the Pilot Hot Rolling MillDevelopment and Research of Pressing Technology of Billets in New Design of Equal Channel Step MatrixEffect of Deformation Temperature on Microstructure Evolution for 20CrMnTiH Steel during Hot CompressionEffect of Edge Masking on Residual Stress of Hot-Rolled Strip on Run-Out TableExperimental Study on Cryogenic Gas Atomization Jet Cooling Difficult-to-Cut MaterialExperimental Test on Continuous Drying Sintering Apparatus by Heating Roller TypeGrafting Polypropylene under Ultrasonic in Water Suspension SystemInfluence of Plasma Torch Nozzle Design on Plasma Arc Analyzed with Finite Element MethodInfluence Rules of Technological Parameters on End Quality in Closed Cross Wedge Rolling (CWR)Investigating the Application of Ultrasonic Welding Technology in Waterproof CompositesKinetics Analysis on Process of Direct Smelting and Alloying between High-Carbon Ferrochrome and Molybdenum OxideMetal Turning Mechanical Model of Machined Surface RoughnessNoise Analysis of Diamond Saw BladeNumerical Simulation of Distortion of Rectangular Tube with Multi-Point Stretch BendingNumerical Simulation of the Dynamic Stress Field Based on DEFORM in the Friction Stir Welding of Al AlloyOptimization of Rolling Modes on the Mill 1700 of JSC "ArselorMittal Temirtau" with Aim to Increase Quality of Sheet Rolled ProductsParameter Optimization for Grinding Process of Micropores with High Aspect RatioParameters Research of Precise Straightening Process in Roll StraightenerPass Design and Finite Element Simulation for Trapezoidal Stainless Steel Sieve BarQuality Cost Analysis of Typical Forging Based on SPC and DEA ModelRadius Compensation in Lateral Bending of L-Shape Plate Considering Rollers DeflectionResearch and Application of Milling Parameters Optimization Based on Genetic AlgorithmResearch and Development of Precision MIG/MAG WeldingResearch of Fused Deposition Modeling Process Oriented Component DesignResearch on Dynamic Recrystallization Behavior of Extra-Heavy Backup Roll Forming ProcessResearch on Stable Forming of Titanium Alloy Bar Using Three-Roll Skew RollingResearch Progress in Technology of Diamond Cutting ToolsSimulation on the Temperature Field of Milling Roller Using Fluent SoftwareSimulation Study on the Force of Particles Migrating in Molten Metal under High-Frequency Magnetic FieldSpringback Analysis of Thin-Walled Stainless Steel Bellow in HydroformingStudy on the Microstructure and Property for T-Joints of Al-Li Alloy Welded by Double Sided Synchronization Fiber LaserStudy on Tool Wear in Green Milling Ni-Based SuperalloyStudy on Welding-Seam Characteristics and Formation of Tailor-Welded Blanks with Big Unequal ThicknessThe FEM Analysis for Feed Rate of Plate Multi-Point Composite Incremental FormingThe Influence of Metal Surface Roughness on Bonding Strength of Metal and Composite MaterialThe Research on Diameter Growth of Deep Groove Ball Bearing Inner Ring in Cold Rolling ProcessThe Research on the Generated Mechanism about the End Concavity of Shaft in the Closed Type of Cross Wedge RollingVelocity Control with SGARC 440 Alloy in the Roll Forming ProcessSimulation of the Surface Roughness by End Face Grinding Wheel with Ordered Abrasive PatternEffect of Different Methods on Properties of SMA490BW Steel Welded JointsMicrostructure and Mechanical Properties of Electron Beam Welded 5A90 Al-Li AlloyStudy on the Microstructure of ThermoformingStudy on Typical Metal Forming Pattern of Ultrasonic Vibration Assisted Upsetting ProcessFinite Element Simulation for Laser Deposition Process of Graphite Copper Gradient Composite of Thermal StressNumerical Simulation of Distribution Characteristics of Electromagnetic Field for Round Billet with Mold Electromagnetic StirringEffect of Load Direction on Failure of Out-of-Plane Composite JointsResearch on the Low Cycle Fatigue Properties of PC/ABS BlendEffect of Equal-Channel Angular Pressing Passes on Corrosion Behavior of Ultrafine-Grained Pure Iron
