Buch, Englisch, 1000 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2100 g
ISBN: 978-3-03785-255-2
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
- Medizin | Veterinärmedizin Medizin | Public Health | Pharmazie | Zahnmedizin Medizin, Gesundheitswesen Medizintechnik, Biomedizintechnik, Medizinische Werkstoffe
- Technische Wissenschaften Sonstige Technologien | Angewandte Technik Medizintechnik, Biomedizintechnik
- Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Biotechnologie Medizinische Biotechnologie
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Keramik, Glas, Sonstige Werkstoffe
- Technische Wissenschaften Technik Allgemein Nanotechnologie
Weitere Infos & Material
Preface, Committees and Symposia
I. Alumina / Zirconia Ceramics
Correlation between Structural Properties and In Vivo Biocompatibility of Alumina/Zirconia Bioceramics
In Vitro Evaluation of Hydroxyapatite-Containing Glass Coating on Zirconia
Electrical Polarization Depresses Low Temperature Degradation and Promotes Bioactivity of Chemically Treated Yttria-Stabilized Zirconia
II. Apatites
Biomimetic Magnetic Nanoparticles for Hyperthermia Treatment
Simultaneous Insertion of Mg2+, Sr2+ and Mn2+ Ions into Hydroxyapatite Structure
Silver-Doped Apatite as a Bioactive and an Antimicrobial Bone Material
Nanostructures of Hydroxyapatite in Pluronic F 127: Preparation and Structural Characterization
III. Bioglasses and Glass-Ceramics
Evaluation of Cytocompatibility of Bioglass-Niobium Granules with Human Primary Osteoblasts: A Multiparametric Approach
The Impact of Stirring Rate on the Crystallinity and Bioactivity of 58S Bioactive Glass
The 1100 C Thermoluminescence Peak as a Probe in Bioactivity Study of the 58S Sol-Gel Bioactive Glass
Ion Release Behavior and Apatite-Forming Ability of Sol-Gel Derived 70S30C Bioactive Glass with Magnesium/Zinc Substitution
Surface Morphology of P2O5-CaO-Nb2O5-Na2O Glass-Ceramics after Acid Treatment: SEM and XRD Study
Investigation of Strontium Effect on the Bioactive Behavior of Glasses in the System SiO2-CaO-P2O5-Na2O-SrO
Effect of Silver Concentration on Bioactivity and Antibacterial Properties of SiO2-CaO-P2O5 Sol-Gel Derived Bioactive Glass
The Impact of Sintering Temperature on the Bioactive Glass-Dental Porcelain Composite Material
Physical Properties and Biological Performance of Bioactive Glasses and Glass-Ceramics Tested In Vitro
Bond Strength of Glass-Fiber Post to Dentine after some Treatment Methods
Effects of Non-Silanized and Silanized Glass Particles on the Physical Properties on Denture Base Materials
The Equilibrium between Calcite and Apatite Precipitation onto Bioglass from Three Different Aqueous Media
In Vitro Studies of Antibacterial Activity of Bioglasses Releasing Ag+
IV. Biomimetics
Characterization of Bio-Absorbable and Biomimetic Apatite/Collagen Composite Powders Derived from Fish Bone and Skin by the Dissolution-Precipitation Method
V. Bone Substitutes
Evaluation of the Degradation Properties of Carbonate Substituted Hydroxyapatite-Poly(e-caprolactone) Composites
Influence of Ca2+ and Mg2+ Supplementation on In VitroBiological Properties of Hydroxyapatite/Collagen Nanocomposite Membrane
Unidirectional Porous ß-Tricalcium Phosphate Bone Substitute: Examination of Balance between New Bone Formation and Absorption
Fabrication of ßTCP with Fully-Interconnected Porous Structure
Fabrication of Carbonate Apatite Block from Calcium Sulfate by Hydrothermal Treatment
Bone Repair Efficiency by Various Round Granular Bone Substitutes
Nanostructured Bone Grafting Substitutes – A Pathway to Osteoinductivity
Characterization and Monitoring of the Evolution of a Calcium Phosphate/Calcium Sulfate Self-Setting Bone Cement
Effect of Simulated Body Fluid on the Behaviour of Artificial Bone Composite Material Extended by Hydroxyapatite and Silicate Powders
Calcite Bone Substitute Prepared from Calcium Hydroxide Compact Using Heat-Treatment under Carbon Dioxide Atmosphere
The Storing Properties of Electric Energy in Bone
Evaluation of TCP Loaded Clinoptilolite Use as Graft Material on Rabbit Tibia
VI. Calcium Phosphate Ceramics
Synthesis of Silver Incorporated Hydroxyapatite under Magnetic Field
Control of Antibiotic Delivery from TCP along with HA on Bone Cement in the Interface Bioactive Bone Cement for Prevention of Infection in Joint Replacement
Preparation and Characterization of Calcium Phosphate Crystals by Precursor Thermolysis Method
Gallium-Doped ß-Tricalcium Phosphate Ceramics: Characterization and Properties
Effect of Al2O3, ZrO2, and TiO2 Addition on the Mechanical Properties and the Microstructure of Natural Hydroxyapatite Obtained from Calf Femoral Bone
In Vitro Dynamic Degradation of Strontium-Hydroxyapatite Granules
In Vitro Evaluations of a Mechanically Optimized Calcium Phosphate Cement as a Filler for Bone Repair
Preparation of Submicron-Sized Hydroxyapatite Powders by Spray Pyrolysis
Recrystallization of Amorphized a-TCP
Raman and Infrared Studies of Substituted ß-TCP
The Effect of Microwave Irradiation on Structural and Mechanical Properties of Nano-Structured Bone-Like Carbonated Hydroxyapatite
In Vivo Behaviour of the Synthetic Porous Hydroxyapatite Prepared by Low Temperature Microwave Processing and Comparison with Deproteinized Bovine Bone
Standardized Study of Carbonate Apatite as Bone Substitute in Rabbit’s Tibia
In Vivo and In Vitro Biocompatibility Study of Nanostructured Carbonate-Apatite
Osseoinduction Evaluation of Hydroxyapatite and Zinc Containing Hydroxyapatite Granules in Rabbits
Effect of Carbonate-Apatite on Bone Repair in Non-Critical Size Defect of Rat Calvaria
Study of Bone Repair in Rat Dental Socket after Implantation of Porous Granules of Beta-Tricalcium Phosphate (ß-TCP) and Magnesium-Substituted Beta-Tricalcium Phosphate (ß-TCMP)
Study of the Release Potential of the Antibiotic Gentamicin from Microspheres of BCP
The Effect of Pore Forming Agent Particle Size on the Porosity, Microstructure and In Vitro Studies of Hydroxyapatite Ceramics
A New Natural Biomaterial: Sheep Dentine Derived Hydroxyapatite
Production of Natural Bioceramic from Land Snails
Carbonated Apatite, Type-A or Type-B?
VII. Cell Materials Interactions
Cytocompatibility and Structural Arrangement of the Collagen Fibers: An In Vitro and In Vivo Evaluation of 5% Zinc Containing Hydroxyapatite Granules
Biological Behavior of Chitosan-Fibroin-Hydroxyapatite Scaffolds with STRO+1A, MC3T3-E1 and SaOS2 Cells
Multinucleated Giant Cells for Biomaterials - Ceramics and Dentin Collagen -
Biochemical Studies of the Potential Anti-Tumor Activity of Novel Chelate-Setting Apatite Cements
Hydroxyapatite Ceramics Including Bone Minerals Promote Differentiation of Osteoblasts Derived from Rat Bone Marrow Cells
Methodological Implications on Quantitative Studies of Cytocompatibility in Direct Contact with Bioceramic Surfaces
Biocompatibility of Carbonated Hydroxyapatite Nanoparticles with Different Crystallinities
Surface and Cell Affinity Properties of Chitosan-Gelatin-Hydroxyapatite Composite Films
Fabrication of Janus Microfiber in Microfluidic System
VIII. Cements
Calcium Phosphate Bone Cement (CPBC): Development, Commercialization and Future Challenges
Investigations on Degradable and Figuline Calcium Alkaline Phosphate Cements with Multimodal Particle Size Distribution
Antibiotic Delivery Effects from HA on Bone Cement in the Interface Bioactive Bone Cement for Prevention of Infection in Joint Replacement
29 to 24 Year-Clinical Results of Total Hip Arthroplasty Cemented with HA by Interface Bioactive Bone Cement (IBBC)
Fabrication of Chelate-Setting Cement Using Silicon-Substituted Hydroxyapatite and its Property
Antibacterial Activity In Vitro of the Developed Glass Ionomer Cements
Investigation of HA Cement Preparation and Properties by Using Central Composite Design
Solubility and Ingrowth Behaviour of Degradable and Figuline Calcium Alkaline Phosphate Cements
Improving the Bioactivity and Biocompatibility of Acrylic Cements by Collagen Coating
The Influence of Three Additives on the Setting Reaction Kinetics and Mechanical Strength Evolution of [Alpha]-Tricalcium Phosphate Cements
PH Evolution and Cytotoxicity of [Alpha]-Tricalcium Phosphate Cement with Three Different Additives
Mechanical Properties of Calcium Phosphate Cements (CPC) for Bone Substitution: Influence of Fabrication and Microstructure
Effect of Liquid/Powder Ratio on the Setting, Handling and Mechanical Properties of Collagen–Apatitic Cements
IX. Clinical Applications
Use of HA–PLLA Composite Screws to Fix Acetabular Bone Graft in Cemented THA: Absorption Pattern of Screws in Six Patients
Simultaneous Implantation of Dental Implants and Autogenous Human Dentin
X. Coatings
Tribological Characterization of Porous TiO2 Coatings Produced by Electrodeposition
Effect of Electrolyte Chemistry on the Structural, Morphological and Corrosion Characteristics of Titania Films Developed on Ti-6Al-4V Implant Material by Plasma Electrolytic Oxidation
Effect of XPEED® on Ti Implants with Deep Threads
Comparative Evaluation of the Bioactive Behavior of HA and ZrO2 Reinforced Coatings
Influence of Strontium on In Vitro Bioactivity of Heat-Treated Porous Ca-P Ceramics on Titanium for Biomedical Applications
Fast Deposition of Nanocrystalline Hydroxyapatite into Additive Manufactured Titanium Porous Structures
Thermal Processing of Calcium Phosphate Coatings on Zirconia Ceramics
How to Enhance Osseointegration – Roughness, Hydrophilicity or Bioactive Coating
Studies of Hydroxyapatite Thin Coating Produced by Dual RF Magnetron Sputtering for Biomedical Applications
Parascholzite Coatings on Niobium Substrates
Comparison between the SBF Response of Hydroxyapatite Coatings Deposited Using both a Plasma-Spray and a Novel Co-Incident Micro-Blasting Technique
Nano Metallic-Oxides as Antimicrobials for Implant Coatings
A Novel HAp Coating Method on Titanium
Bioactive Coating on Porous Materials with an Interconnected Pore System to Improve Osseointegration
Spectroscopic Studies of Adsorbed Myoglobin on Hydroxyapatite Surface
Organic-Inorganic Hybrids for Bioinert Coating on Implantable Electronic Devices
Effect of Surface Charge on the Apatite Mineralization Process
Effect of the SBF Concentration on the Apatite-Forming Ability of ASTM F75 Alloy Induced by Wollastonite
Nanomechanical Properties of Bioactive Ti Surfaces Obtained by NaOH-Based Anodic Oxidation and Alkali Treatment
Investigations on Vitro Behaviour of Ceramic Coatings Deposited by High Velocity Suspension Flame Spraying
Characterization of Plasma Sprayed Yittria Stabilized Zirconia (8 wt %) Hydroxyapatite Coatings
Pore Morphology in MAO Produced Oxide Film Modified by Magnesium Integration
XI. Composites
Fabrication of Bioactive Apatite Nuclei-Precipitated Composites
Comparison of Microstructures of Bovine Hydroxyapatite and Sol-Gel Derived Porous Alumina-Hydroxyapatite Biocomposite Powders
Fabrication of Organic/Inorganic Hybrids by Infiltration of Commercially-Available PLGA into Porous Hydroxyapatite Ceramics and its Material Properties
Silicate and Calcium Ions Releasing Biomaterials for Bone Reconstruction
Production and Characterization of Bioglass®-Titania Reinforced Hydroxylapatite Composite
Preparation and Characterization of Polylactide-co-glycolide/Carbonate Apatite (PLGA/CHA) Composite Scaffolds
Gradient Organic Inorganic Nanocomposites for Tissue Repair at the Cartilage/Bone Interface
Mechanical Properties and In Vitro Bioactivity of ß-Tri Calcium Phosphate, Merwinite Nanocomposites
Comparison of Mechanical Properties of Sheep Hydroxyapatite (SHA) and Commercial Synthetic Hydroxyapatite (CSHA)-MgO Composites
XII. Dental Materials
Occlusal Surface Reconstruction with Chairside Ceramic Onlay Using CEREC Biogeneric Design Mode: Case Report
Anterior Single Laminate Veneer Restoration Using CEREC Biogeneric Reference Design Mode: Case Report
Effect of In Vitro Ageing on a Cold Isostatic-Pressed Zirconia Ceramic for All Ceramic Restorations
Grafting Materials for Major Sinus Lift
Regeneration of Tooth Enamel by Flexible Hydroxyapatite Sheet
Clinical Success of IPS Empress II Inlays/Onlays
Calcium Fluoride/Hydroxyfluorapatite Nanocrystals as Novel Biphasic Solid Solution for Tooth Tissue Engineering and Regenerative Dentistry
Resin Bond Strength to Alumina Coated Ce-TZP/Al2O3 Dental Ceramic
Ag-Doped Sol-Gel Derived Novel Composite Materials for Dental Applications
Effect of Different Surface Applications and Adhesive Systems on Bond Strength of Porcelain Repair Material
Mechanical Properties of CAD/CAM Manufactured and Prefabricated Endodontic Posts
Influence of Nano-Hydroxyapatite Addition to Calcium Hydroxide Cement on its Properties
The Effect of Five Polishing Materials on the Surface Roughness of Acrylic and Composite Denture Resins
XIII. Drug Delivery Carriers
Regulating Protein Adsorption onto Hydroxyapatite: Amino Acid Treatment
Preparation of Calcium-Phosphate Microspheres by Salt-Assisted Ultrasonic Spray-Pyrolysis Technique and their Drug Release Behavior Using Anti-Angiogenic Agent, TNP-470
Preparation of Silver-Containing Hydroxyapatite Powder by Ultrasonic Spray-Pyrolysis Technique and its Antibacterial Property
Dissolution Medium Responsive Simvastatin Release from Biodegradable Apatite Cements Drug Delivery System - The Therapeutically Effect and their Histology in Osteoporosis Rats -
XIV. Injectable Materials
Preparation of Injectable Hydroxyapatite/Collagen Nanocomposite Artificial Bone
Investigation of the Phase Separation Occurring during the Injection of ß-Tricalcium Phosphate – Water – Glass Beads Pastes
The Effect of Si(IV) Species Derived from Chitosan-Silicate Hydrogels on Osteoblast Behavior
Study of the Cytotoxicity of a Composite of Carboxymethylcellulose (CMC) and a BioCeramic (Biphasic Calcium Phosphate-BCP) Injection for Use in Articular Cartilage Repair
Self Hardening Macroporous Biphasic Calcium Phosphate Bone Void Filler for Bone Reconstruction; Animal Study and Human Data
Injectable Microparticles of Bioceramic for Bone Reconstruction Animal and Human Applications. HYDROS™ Concept
XV. Nanomaterials
Poly(lactic-co-glycolic)/Nanostructured Merwinite Porous Composites for Bone Tissue Engineering. I. Preparation and Morphology
Synthesis and Characterization of Nano Crystalline Hydroxyapatite Spheroids Using Anionic Template for Bio Applications
TEM Observation of Biomolecules on/in Mesoporous SBA-15
Comparison of Bone Substitutes in a Tibia Defect Model in Wistar-Rats
X-Ray Peak Broadening and In Vitro Dissolution Studies of Thermally Stabilized Nanocrystalline Carbonated Hydroxyapatite
Controlled Synthesis, Characterization and Magnetic Properties of Magnetite (Fe3O4) Nanoparticles without Surfactant under N2 Gas at Room Temperature
Internal Diffusion of Biocompatible Polymer-Coated Inorganic Nanoparticles in Mice
PVP Addition during Hydroxyapatite Synthesis: Effect on Albumin Adsorption
Simulations of Hydroxyapatite Nanocrystals for HRTEM Images Calculations
FTIR Analysis and Cytotoxicity Test of Titanium Dioxide Nanoparticles
Nano-Bioceramics Production from Razor Shell
Sea Snail: An Alternative Source for Nano-Bioceramic Production
XVI. Osteoconduction-Osteoinduction
Enhanced Osteoconductivity of Positively Charged Titanium Metal
XVII. Other Materials
Preparation of Porous Wollastonite Microspheres
Improvement of Bone Ingrowth on PEEK Surface Implant
Embolic Materials of BaFe12O19/Polyurethane Microspheres
XVIII. Porous Materials
BMPs as Adsorptive Proteins for Ceramic Scaffolds
Structural Optimization of Macroporous Magnesium Phosphate Scaffolds and their Cytocompatibility
Hydroxyapatite Scaffolds Produced by Hydrothermal Deposition of Monetite on Polyurethane Sponges Substrates
XIX. Scaffolds
Hydroxyapatite/Biopolymers Composite Scaffolds for Bone Tissue Engineering
Fully-Interconnected Pore Forming Calcium Phosphate Cement
Cell Migration Ability Test for Bioactive Ceramics toward International Standardization of Ceramics for Regenerative Medicine
Preparation of Fibrous Scaffolds Containing Calcium and Silicon Species
Stability of the Magnesium Carbonate Apatite/Anionic Collagen Scaffolds: Effect of the Cross-Link Concentration
Calcium Alkaline Phosphate Scaffolds for Bone Regeneration 3D-Fabricated by Additive Manufacturing
Mechanical Performance and In Vitro Studies of Hydroxyapatite/Wollastonite Scaffold for Bone Tissue Engineering
Static and Dynamic Degradation of Sintered Calcium Phosphate Ceramics
SEM Observation of Composite Ceramic Scaffolds’ Surface during Incubation in Culture Medium with or without Human PDL Fibroblasts
Electrospun Scaffolds Composed of Poly(L-lactic acid) and Hydroxyapatite
XX. Tissue Engineering
Effect of Flow Rate of Medium in Radial-Flow Bioreactor on the Differentiation of Osteoblasts in Tissue-Engineered Bone Reconstructed Using an Apatite-Fiber Scaffold and Rat Bone Marrow Cells
Magnesium Based Sol-Gel Derived Bioactive Glass Ceramics for Dental Tissue Regeneration
Development and Mechanical Characterization of a Collagen/Hydroxyapatite Bilayered Scaffold for Ostechondral Defect Replacement
Ti4O7 Used as Electrode in Biomedicine and for Electrochemical Study of Scavenging Mechanism
Biological Evaluation of a Novel Tissue Engineering Scaffold of Layered Double Hydroxides (LDHs)
Novel Bioactive Poly(e-caprolactone)-Gelatin-Hydroxyapatite Nanocomposite Scaffolds for Bone Regeneration
XXI. Titanium and Alloys
Anti-Bacterial Microporous Ceramic Coating for Ti6Al4V Alloys
Apatite-Forming Ability Governing Bone-Bonding of Ti-15Zr-4Nb-4Ta Alloy Subjected to Calcium Solution Treatment
Adhesion Behaviors of Serum Proteins on Oxide Layer of Commercially Pure Titanium
The Processing and Fatigue Characterization of TiNi and Ti-6Al-4V Porous Materials
Acceleration of Apatite Nucleation on Parallel Aligned Ti-Substrates with Optimum Gaps by UV-Light Pre-Irradiation
