Advanced Powder Technology X

10th PTECH 2015
Erscheinungsjahr 2017
ISBN: 978-3-0357-1117-2
Verlag: Trans Tech Publications

Buch, Englisch, 604 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1150 g

This special collection by results of the 10th International Latin American Conference on Powder Technology (PTECH 2015, Rio de Janeiro, Brazil, from 8th to 11th November 2015) focuses on the powder technology of metals, ceramics and composites. The topics cover wide range over of powder production, ceramics processing, properties characterization and applied materials applications, powder compaction and sintering, injection moulding and mechanical alloying, nanomaterials, fuel cells, storage energy materials, biomaterials, sintering processes.

Autoren/Hrsg.

Klein, Aloisio Nelmo

Gomes, Uílame Umbelino

Vicente Jr., Nério

Zoz, Henning

Fachgebiete

• Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Pulvertechnologische Verfahren

Inhaltsverzeichnis

Preface, Committees, Sponsors
Chapter 1: Characterization and Using of Materials, Technologies of Materials Production and Processing
Phase Transformations in Mechanically Alloyed and Sintered Ti-XMg-22Si-11B (X = 2 and 7 at.-%at) Powders
Structural Evaluation of Mechanically Alloyed W-50at%C Powders
Synthesis by High-Energy Ball Milling of MgH2-TiFe Composites for Hydrogen Storage
Microstructure and Oxidation Resistance of Mechanically Alloyed and Sintered Ni-Nb and Ni-Nb-Ta Alloys
Manufacturing of AA2124 Aluminum Alloy Metal Matrix Composites Reinforced by Silicon Carbide Processed by Powder Metallurgy Techniques of High Energy Ball Milling and Hot Extrusion
Synthesis of Nanostructured Tungsten Carbide (WC) from Ammonia Paratungstate-APT and its Characterization by XRD and Rietveld Refinement
Erucamide-Nanoclay Systems Obtained by Intercalation Process
Simultaneous Effect of Reaction Temperature and Concentration of Surfactant in Organo-Bentonite Synthesis
Characterization of Mn0.67Zn0.33Fe2O4 Nanoparticles Synthesized under Different pH
Study of the Encapsulations of the Eugenol in ß-Cyclodextrin in Low Concentrations Conditions
Hydrothermal Synthesis and Characterization of Zeolite A Using Amorphous Gel from Industrial Reagents
Numerical Simulation and Experimental Study of Particle Dynamics in a Rotating Drum with Flights
Effect of Surfactant on Bubble Size and Air Holdup on Column Flotation
Sucrose Crystallization in Vibrated Bed Process, Unusual Crystallizer Configuration
Experiments and CFD Predictions of Particles Velocity and Trajectory in Flow with Non-Newtonian Fluid through a Partially Obstructed Duct
CFD Simulation of Different Flow Regimes of the Spout Fluidized Bed with Draft Plates
CFD Simulation of Spouted Bed Working with a Size Distribution of Sand Particles: Segregation Aspects
Bioproducts from the Slow and Fast Pyrolysis of Sugar Cane Bagasse
Isoconversional Kinetic Analysis of Pyrolysis of Malt Waste
Thermal Analysis and Analytical Pyrolysis of Three Types of Lignin
Experimental Study of Charge Motion in a Tumbling Ball Mill
Lab Scale Vibrating Screen Study on Operational Variables that Affect the Separation Efficiency
Coffee Husks Characterization for the Fast Pyrolysis Process
Study of the Influence of the Underflow Diameter on the Separation Process of an Optimized Hydrocyclone for Concentration Purposes
A Fluid Dynamic Study in a Rotating Disk Applied in Granulation of Fertilizers
The Influence of Pr and Mg Content on the Hydrogen Decrepitation of LaNi-Based Battery Alloys
Comparative Study of the Optimized Hydrocyclones H13 and HCOT3 for Maximum Liquid Recovery
Study of Granulated Gypsum Hardness Coming from the Granulation Process in Rotating Disk
Characteristics of the Milk Powder Particles Lecithinated
Global Reaction Model to Describe the Kinetics of Catalytic Pyrolysis of Coffee Grounds Waste
Production and Characterization of Porous Titanium Applied in Biomaterial
Effect of Bactericidal Elements Addition on the Microstructure and Mechanical Properties of Ti34Nb Alloy
Development of Ti-12Mo-8Nb Alloy for Biomedical Application
Human Dermal Fibroblast Adhesion on Ti-7.5Mo after TiO2 Nanotubes Growth
Production Methods of Thermoelectric Materials and their Main Characteristics
Effect of Fe Addition on Microstructure and Properties of Powder Metallurgy Ti35Nb10Ta Alloy
Synthesis and Characterization of Ag-TiO2 Nanocomposites for Possible Use as Biocide
Iron Nanoparticles Coated with Nanostructured Carbon: Synthesis and Application in Glucose Biosensors
Iron-Carbon Core-Shell Nanoparticles Obtained with Different Conditions of Synthesis
Structural and Magnetic Characterization of LaFe1-xAlxO3 (x = 0 and 0.2) Orthoferrites Synthesized by Gelatin Method
Study of the Effects of SiO2 Nanoparticles Concentration on the TiO2 Nanoparticles Suspensions Stabilization
Antimicrobial Activity of Chlorhexidine against Multi-Species Biofilm Formation
Effect of NbH Particle Size and Cooling Type on the Microstructure, Phase Composition and Microhardness of Ti-20Nb-20Zr Alloy
Zinc Oxide Nanoparticles as Antimicrobial Additive for Acrylic Paint
Study on Processing and Characterization of Calcium Phosphate Bioceramics
Thermal Influence on the Electric Parameters and Microstructures of Activated Powder Double Layer Supercapacitors
Longe Range Exchange Interactions in Sintered CuMn Alloys: A Monte Carlo Study
Deformations Limits Analysis of Sheet Metal Manufatured through the Incremental Forming Process
Influence of Functionality of Polyhedral Oligomeric Silsesquioxane (POSS) Dispersed in Epoxy Resin for Application in Hybrid Coating
Influence of the pH and Stirring Speed of the Electrodeposition Bath in the Performance of Zinc and Zinc-Nanocomposite Coatings
Wettability Study of Red Ceramic and Glaze from Dimension Stone Waste
Eletrochemical Behavior of Hot Swaged and Aged Ti-12Mo-13Nb Alloy
Development of the Self-Lubricating Steels by Compression of Granulated Powders
Evaluation of Behavior of Aluminium-CNT Composite on the Equal-Channel Angular Extrusion
Rapid Solidification and Laser Cladding of Gas Atomized Ni-Nb-Sn Bulk Metallic Glass
Influence of Composite Nano-Coating of Ni-Co-SiC Obtained by Electrodeposition on the Corrosion Resistance of API 5L X80 Steel
Valuation of Mechanical Properties and Microstructural Characterization of ASTM F75 Co-Cr Alloy Obtained by Selective Laser Melting (SLM) and Casting Techniques
The Role of Sintered Al2O3-Nb2O5 Front Plate on the Ballistic Performance of Multilayered Armors
Nanocomposite Polymer Clay to Support the Release of Drug
Design and Development of Compaction Tools for Powder Metallurgy
Supercapacitor Application of Powder Prepared Using the Hydrogenation Disproportionation Desorption and Recombination (HDDR) Process in Graphene Oxide
Effect of Sn and Cu on Corrosion Resistance of LaMgAlMnCoNi Type Alloys
Chapter 2: Heat Treatment and Sintering Technologies
Secondary Hardening of an AISI M3:2 High Speed Steel Sinter 23 Hot Isostatic Pressed
Heat Treatment and Microstructural Studies of LaNi-Type Battery Electrode Alloys
Evolution of Sintering of Particles that Compose Iron Ore Agglomerates
Kinetic Behavior of Self-Reducing Pellets Containing Coal of Elephant Grass
Analysis of the Microwave Heating Effect in the Comminution Efficiency of Iron Ore Particles
The Effect of Heat Treatment on Microstructure and Mechanical Properties of Ti-8.5Nb-4.5Ta-13Zr Alloy
Three-Dimensional Microstructure Reconstruction and Phase Boundary by Serial Sectioning and Numerical Approach
Effect of Isothermal on the Heat Treatment of Ag/Bi2212 Superconducting Tapes
Study of Ceramic Coating Processing Using Dimension Stones Wastes in the Composition of the Glaze
Microstructural Features of Sn-3.0Ag-0.7Cu Alloy Prepared by Conventional and Microwave Sintering
Influence of a-Phase Field Heat Treatment on the Tensile and Primary Creep Resistance of a Powder Metallurgical Processed Ti-45Al-5Nb-0.2B-0.2C Titanium Aluminide Alloy
The Influence of the Sintering Temperature on the Grain Growth of Tungsten Carbide in the Composite WC-8Ni
Geopolymeric Cements Obtained by Alkaline Activation of Aluminosilicates from Industrial Waste
Hot Tensile Behavior and Fracture Characteristics of a Plasma Nitrided Maraging 300 Steel
Characterization of Atomized Powders and Extruded Samples of an Al-Si-Cu Alloy
Analysis of the Iron Ore Pellet Mechanical Behavior under Biaxial Compression
Harmonic Structured Ti6Al4V by Spark Plasma Sintering
Effects of the Casting Temperature in the Leakage of Zamak 5
High-Energy Ball Milling and Subsequent Heat Treatment of Ti-Cu-Si-B Powders
Influence of Rock Chemical Composition in Microwave Heating and Decontamination of Drill Cuttings
A Finite Element Analysis for an Iron Ore Pellet Compression Test
Sintering Study of NiCrAlY
Spark Plasma Sintering of Low Alloy Steel Powder
Effects of Milling Time on Microstructure and Mechanical Properties of Composite WC-(Fe3Al-B) Consolidated by Spark Plasma Sintering
Mechanical Alloying and Sintering of Ni-Sn and Ni-Mg Powder Mixtures
Structural Evaluation of Ti-Cr-Si-B Powders Produced by High-Energy Ball Milling and Sintering
Sintering of AISI M2 Tool Steel Processed in High-Energy Planetary Mill
Influence of Grinding Media Size and Sintering Time in the Processing of AISI D2 Tool Steel by High-Energy Milling
Development of Aluminium Foam through the Sintering Dissolution Process from the Alloy AA 3104
Effect of Liquid Phase during Sintering on Mechanical and Tribological Properties of Self-Lubricating Composites
Fundamentals of Microwave Heating and Drying of Drilled Cuttings
Mechanical Properties and Microstructural Characterization of Cobalt-Chromium (CoCr) Obtained by Casting and Selective Laser Melting (SLM)
Chapter 3: Magnetic Materials
Magnetite Nanoparticles Study Applied to Magnetic Hyperthermia Treatment
The Exchange Energy Term and the Curling Reversal Mode in Hard Magnetic Materials Manufactured by Powder Metallurgy
B-H Loop of Sintered Stainless Steel 410 Adjusted by Superellipse Model
Consolidation Behavior and Magnetic Properties of Nanocrystalline Nd-Fe-B Magnets Prepared by Spark Plasma Sintering
d-HDDR Processing of Nd-Fe-B Based Alloys to Obtain Highly Anisotropic Nanocrystalline Powders
Dry and Wet Milling Comparison of Nd-Fe-B Magnets Based on Strip Cast Alloys
Thermal Aging of NdFeB Compression Molded Magnets
Effect of Compaction Pressure on the Hysteresis Loop of NdFeB Bonded Magnets

Über Autor(innen)

Eds. Aloisio Nelmo Klein, Uílame Umbelino Gomes, Nério Vicente Jr. and Dr. Henning Zoz