Buch, Englisch, 514 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 150 g
ISBN: 978-3-0357-1504-0
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface
Chapter 1: Material Extrusion (ME)
DFAM Based Multi-Material 3D Printing Using Conductive and Flexible Filaments
Design of Additively Manufactured Lattice Structures for Tissue Regeneration
The Influence of 3D Printing Parameters on Elastic and Mechanical Characteristics of Polylactide
Quasi-Static Characterization of Polyamide-Based Discontinuous CFRP Manufactured by Additive Manufacturing and Injection Molding
Analysis of Problems during 3D Printing Manufacturing Process
Investigating the Impacts of Heterogeneous Infills on Structural Strength of 3D Printed Parts
Effect of Processing Parameters on Mechanical Properties of 3D Printed Samples
Medical Applications of Biomaterials: The Case of Design and Manufacture of Orthopedic Corsets Made of Polylactic Acid by Additive Manufacturing
3D Printing of Carbon Fiber Reinforced Plastics and their Applications
Comparison of Selected Thermoplastic Materials in the Fused Deposition Modeling Process and their Influence on the Dimensional Accuracy of an Orthodontic Upper Teeth Model
Extrusion Temperature and Flow Rate Effects on Tensile Properties of Additively Processed Poly(Ethylene-co-Trimethylene Terephthalate)
Observation of Shape and Dimensional Accuracy Changing of Parts in Time Intervals Manufactured by Additive Method Fused Deposition Modeling
Additive Manufacturing of PA6 with Short Carbon Fibre Reinforcement Using Fused Deposition Modelling
Influence of Composition on Mechanical Properties of Additively Manufactured Composites Reinforced with Endless Carbon Fibers
Evaluation of Tensile Properties and Damage of Continuous Fibre Reinforced 3D-Printed Parts
Anisotropy Evaluation of Different Raster Directions, Spatial Orientations, and Fill Percentage of 3D Printed PETG Tensile Test Specimens
Chapter 2: Vat Photopolymerization (VPP)
Fabrication of ß-TCP Scaffold with Pre-Designed Internal Pore Architecture by Rapid Prototyping of Mask Projection Stereolithography
Lithography-Based Ceramic Manufacturing (LCM) for Dental Applications
Fabrication of Dense Silica Ceramics through a Stereo Lithography-Based Additive Manufacturing
One Photon 3D Polymerization via Direct Laser Writing
Three Dimensional Smart Processing by Ultra Violet Laser Lithography of Ceramic Additive Manufacturing
Chapter 3: Powder Bed Fusion (PBF) and Direct Energy Deposition (DED)
Build Orientation Influence on some Mechanical Properties of 3D-Printed Polyamide Specimens
Direct Laser Additive Manufacturing of Ceramics by Powder Deposition
Preparation of Polymer Powder Layer for Additive Manufacturing Applications Using Vibration Controlled Brass and Glass Nozzles
Chapter 4: Materials and Technologies of 3D Construction Printing (3DCP)
Effect of Type of Fiber on Inter-Layer Bond and Flexural Strengths of Extrusion-Based 3D Printed Geopolymer
Influence of Binder Saturation Level on Compressive Strength and Dimensional Accuracy of Powder-Based 3D Printed Geopolymer
Technology of 3D Print in Field of Renovation of Architectural Structures and Historical Buildings
On the Question of Mix Composition Selection for Construction 3D Printing
Limits and Potential of 3D Printing Technologies for Construction of Concrete Shells
Rheological Behavior and Mix Design for 3D Printable Cement Paste
Towards Additive Manufacturing: Pumping Flow Rate with Time-Dependent Material Rheology in 3D Cementitious Material Printing
The Preparation and Performance of the Cement-Based Concrete 3D Printing Materials
Effect of Hydrophobic Aerogel Granules on Thermomechanical Properties of Cementitious Composites
Chapter 5: Hybrid and Complex Technologies, Post-Processing and Machining Processes
Set-Up of an Experimental Procedure for the Surface Smoothing of FDM Parts through Acetone Vapor
The Study and Development of Factor Affecting the Smoothness in 3D Printed Part Surface Treatment via Acetone Vapor
Study of the FDM Parameters of the ABS Parts in the Surface Quality after Machining Operations
Electrohydrodynamic (EHD) Bioprinting of Polycaprolactone Scaffolds
3D Printing of Plain and Gradient Cermets with Efficient Use of Raw Materials
Direct Digital Manufacturing of Nanocomposites
Parametric Study on Surface Roughness of Metallized Parts Manufactured by Additive Manufacturing
Chapter 6: Raw Materials and Mixtures for 3D Printing
Rosin Based Composites for Additive Manufacturing
The Exploitation of Polymer Based Nanocomposites for Additive Manufacturing: A Prospective Review
The Use of Polypropylene and High-Density Polyethylene on Cork Plastic Composites for Large Scale 3D Printing
Biodegradable Composite Materials Based on Poly(3-Hydroxybutyrate) for 3D Printing Applications
Tuning of HDPE Properties for 3D Printing
Investigation and Characterization of New Polyimide Powder for Selective Laser Sintering
Study on Particle Modified ABS in 3D Printing
Mechanical Properties of 3D-Printed Wood-Plastic Composites
Investigating the Void Content, Fiber Content, and Fiber Orientation of 3D Printed Recycled Carbon Fiber
Comparison of Supermacroporous Polyester Matrices Fabricated by Thermally Induced Phase Separation and 3D Printing Techniques
Development of Composite Materials for 3d Printing on the Basis of Polyphenylenesulfone
3D Liquid Bioprinting of the PCL/ß-TCP Scaffolds
Chapter 7: Applicability Analysis of 3D Printing Technologies
Using of 3D Printing Technology in Low Cost Prosthetics
Rapid Prototyping Technology for Special Pressure Vessels
Research on 3D Printing Forming Technology for Processing Tablet Material
Failure Observation of 3D-Printed Thrust Bearing Specimens with Inner Defects in Water Conditions
Failure Observation of 3D-Printed Thrust Bearing Specimens at Cross Section Observations in Dry Conditions
Investigation of Tribological Characteristics of Polymers Used in Medicine
Assembly Tool Manufacturing and Optimization for Polylactic Acid Additive Manufacturing
The Fabrication of Tissue Engineering Scaffolds by Inkjet Printing Technology
Chapter 8: Equipment Design
Towards a Conceptual Notion for a Universal Printing Machine
Adaptive Platforms and Flexible Deposition System for Big Area Additive Manufacturing (BAAM)
Validation of Material Parameters of Collagen Compositions for the Application as a Bioink
