Sonstiges, Englisch, Band Volume 768, 904 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, Band Volume 768, 904 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Applied Mechanics and Materials
ISBN: 978-3-03859-254-9
Verlag: Trans Tech Publications
The 103 papers are grouped as follows:
Chapter 1: Environmental Materials Engineering, Materials Technologies and Processing;
Chapter 2: Biomass Comprehensive Utilization;
Chapter 3: Soil Remediation Technologies;
Chapter 4: Hazardous Waste Technologies and Sound Disposal;
Chapter 5: Household Garbage Recycling and Landfill Disposal;
Chapter 6: Solid Waste and Industrial Solid Waste Comprehensive Utilization and Disposal;
Chapter 7: Sewage Sludge Technologies and Utilization;
Chapter 8: WEEE Technology;
Chapter 9: Recycling, Waste Management, Environmental Protection and Engineering
Autoren/Hrsg.
Weitere Infos & Material
An Environment-Friendly Method to Catalytically Oxidate NO in Waste Water by Supported Manganese Oxide on Graphite OxideAcute Toxicological Effects of Suspended Solids on the SkeletonemacostatumA Method for Determination of Penicillin G Residue in Waste Penicillium chrysogenum Using High Performance Liquid ChromatographyDetermination on Metal Elements and Water-Soluble Anion in PM2.5Nanowaste Management Policy in the Capital City, MongoliaMechanism Research on Pelleting Process and Block Self-Healing of Mixture Recycled Plastics in Die-PlateMechanism Research on Self-Cleaning Filtration of Mixed Plastics in Remanufacture Extrusion ProcessA Review of Thiocyanate Hydrometallurgy for the Recovery of GoldStabilization of Heavy Metal Containing Smelting Ash through Mechano-Chemical ReactionPreparation of Solid Fuel Hydrochars from Waste Biomass by Hydrothermal CarbonizationCurrent Status of Comprehensive Use and Management Recommendations of Coal Tar in ChinaRemoval of Heavy Metals from Aqueous Solution Using Biochar Derived from Biomass and Sewage SludgeThermogravimetric Experimental Study on Combustion Performance of Co-Firing of Sludge, Coal and Biomass in Micro-Oxygen-Rich EnvironmentEvaluation of Sludge Reduction Mechanisms in ?Sonolysis-Cryptic Growth? Wastewater Treatment SystemCharacterization of a Sludge Derived FuelSynthesis of Polyhydroxyalkanoates from Waste Frying Oil by Cupriavidus necatorA Feasibility Study on Co-Processing of Soil Contaminated with Heavy Metals in Cement KilnsStabilization of As in Soil Using Two Kinds of Fe(III) SaltsResearch Progress in Enhancement Technology of PhytoremediationCharacterizing the Photodegradation Ability of Pentachlorophenol in ?-Cyclodextrin Soil Washing SolutionStudy on the Oil Pollution Investigation and Remediation Scheme Selection in the Typical Station of Daqing OilfieldDistribution Characteristics and Risk Assessment of Soil Lead at a Children?s Blood Lead Exceeding Area in FujianComposition and Correlative Concentration Analysis of Odorous Compounds Emitted from the Working Surface at a Landfill in BeijingResearch on the Changes of Physico-Chemical Properties of Lead-Acid BatteriesAnalysis of Particular Pollutants in Waste Transformer OilThe Detection and Remediation Technologies of PCB-Contaminated SoilsA Study of Mercury Determination in the Waste Storage Area of Health Care Organizations in Ulaanbaatar CityProduction Characteristics of Vinyl Acetate Distillation Residues in ChinaEffects of Incinerator Exhaust Gas Treatment Agents and Fly Ash Processing Chelates on MSW Landfill ManagementResearch on Environmental Impact Evaluation and Recycling Systematic Assessment of Plastic Waste in ChinaEstimating Non-Methane Organic Compound Emission Factor for Municipal Solid Waste LandfillTemporal and Spatial Distribution Characteristics of Nitrate Nitrogen in Leachate of the Semi-Aerobic Landfill TreatmentResearch on the Influence of Kitchen Waste Separation on MSW IncinerationResearch on Screw-Extrusion Dehydration Technology and Equipment in Recycling Process of Urban GarbageEffect of Oil Content on Dry Anaerobic Digestion of Food Waste under Mesophilic ConditionsAnaerobic Leaching-Bed Reactor Treating Food Waste for Organic Acid Production: Effect of Bulking AgentUF Membrane Cleaning Fouled by Food Waste FermentationTransformation of Dioctyl Phthalate in Bioreactor LandfillExamination on Influence Caused by Air Injection Manners Changing in Aerobic-Anaerobic Landfill MethodOptimum Position of Air Injection in Aerobic and Anaerobic Refuse LysimetersPollution Control for Industrial Construction and Demolition Waste in Chemical and Metallurgical FactoriesTechnology Development on Heavy Metal-Contained Sludge Reduction and Resource Recovery on Stainless Steel Cold-Rolled Mixed SludgeAnalysis of Physical and Chemical Features of Sintering Dust and Study of Recycling TreatmentAnalysis of the Influencing Factors of Mechanochemical Destruction of Halogenated Organic WastesPreparation Thermal Insulation Masonry Mortar Using Regeneration Light SandEvaluating Solidification Characteristics of Textile Dyeing Sludge with Addition of Portland Cement and AttapulgiteCritical Evaluation of Isothermal Separating Anosovite (Mg0.3Ti2.7O5) Phase from Synthesized Ti-Bearing Blast Furnace Slag by Super GravityProduction of Renewable Petrochemicals from Catalytic Co-Pyrolysis of Beech Wood and Low-Density Polyethylene with Mesoporous Bifunctional ZSM-5 ZeolitesUtilization of Steel Slag as Aggregates for SMA-13Analysis on Aging Characteristics of Composite InsulatorsThe Feasibility Study on GRP Waste Used as Alternative Fuel for Cement ProductionImpacts of Different Wetting Agents on the Density Separation of Waste Plastic MixturesLife Cycle Analysis on Regenerating and Energy Recovery of Plastic Solid Waste Management in ShanghaiThe Study on Thermal Stability of Hg and S Element in Semi-Dry Flue Gas Desulfurization AshExtraction of Lead from Spent Leaded Glass in Alkaline SolutionFeasibility of Bioaugmentation with Iron/Sulfur Oxidizing Acidophiles to Enhance Copper Bioleaching from a Flotation Copper OreCharacterization of Aromatics at Working Surface of a Municipal Solid Waste LandfillStudy on the Membrane Fouling of the Process of Using Two Layer Flat-Sheet Membrane for Sludge Thickening and Water ReuseComprehensive Evaluation of Poly-Phosphate Release from Sewage Sludge with Thermal TreatmentStudy on Nitrogen Transformation during Sewage Sludge Pyrolysis at Low TemperaturesThe Optimization of Thermal Pre-Treatment Time for Extracellular Polymeric Substances Extraction from Sewage SludgeUltrasound Coupled with Fenton Oxidation Pre-Treatment of Sludge to Release Organic Carbon, Nitrogen and PhosphorusCharacteristics of Sludge Moisture Content Variation in Sludge Drying Reed Beds
In Situ Transesterification of Sewage Sludge for Biodiesel ProductionResearch on the Optimization of Beijing Municipal Sewage Plant Sludge Dewatering Reagent Cationic PolyacrylamideTG-FTIR Analysis of Sewage Sludge: Influence of Moisture and AtmosphereSafe Utilization of Municipal Sewage Sludge in Agriculture and ForestryMethane Emissions in Wastewater Treatment Process and Emissions Calculation in Henan ProvinceTreatment of Cr(VI) WasteWater with Modified Coal Fly AshA Novel Route for Copper Recovery from Waste Printed Circuit Boards via MechanochemistryNon-Metallic Materials from Waste Printed Circuit Boards (PCBs): Characteristics, Environmental Risk and RecyclingInvestigation on Dissolution of Brominated Epoxy Resin Using Ionic Liquid [Bmim]Cl from Waste Printed Circuit BoardsEnvironmental Risk Assessment and Environmental Management of Waste Organic Solvents in Electronics IndustryBio-Extraction of Metals as Secondary Resources from E-WasteA Novel Debromination of Tetrabromobisphenol A (TBBPA) by Hydrothermal Treatment with Reactive MineralsFeasibility Analysis of Recycling and Disposal of Spent Lithium-Ion Batteries in ChinaResearch on Evaluation Index System of Non-Metallic Materials Recycling Technologies from Copper Clad LaminateTheoretical Study of Waste Containers Recycling Design Based on the RecyclingDevelopment and Utilization of Circular Economy and Urban Mining - Chengdu City Based Renewable Resource Industry SurveyA Study on Low Carbon Competitiveness Evaluation in the Ocean Economic ZoneStudy on Multi-Department Joint Supervision Mechanism for Redevelopment of Industrial Contaminated SitesThe Research on Recovery Network Optimization of Medical WasteCo-Processing Hazardous Waste in the Chinese Cement Industry - Status 2014Research on the Hazardous Waste Management in NetherlandsApplication of WebGIS Technology in Hazardous Waste Management SystemA Research on the Recycling of PVC Waste by ?Three-Rail Green Cycle?Prediction of Urban Waste Disposal Based on ARIMA ModelUtilization of Organic Waste and Residues ? General Aspects and Innovative SolutionsPredicting the Amount of Municipal Solid Waste via Hybrid Principal Component Analysis-Artificial Neural Network ApproachSuggestion on the Leakage Pollution Control for the Historical Municipal Solid Waste Landfills in ChinaThe Analysis of Obstacles and the Promoting Strategy of Achieving Detailed Classification of Municipal Living WasteStudy on General Industrial Solid Waste Situation and its Resource Utilization in Kunming in Recent YearsOptimization Design of Construction Waste Reverse Logistics SystemSoil Nutrient Analysis of Different Utilization Types in Coal Mining Subsidence AreaSituation of WEEE in Two Capitals Beijing, China and Bucharest, Romania: A ComparisonWEEE Resource Utilization Evaluation Model Exploring in ChinaCurrent Situation of E-Waste Issues in MongoliaSolution and Analysis for Ecological Remediation of the Damaged Mountains in Jinan, ChinaProblem and Countermeasure on Promoting the Plastic Bag Ban of USAApplication and Prospection of Internet of Things Technology in Waste ManagementPlastic Debris Pollution on Recreational Beaches: A Malaysian Case StudyThe OECD Experience of Setting Pollutant Release and Transfer Register to Facilitate Waste Management in Developing CountriesA Comparative Review on Chemical Registration Management Regulations
