Buch, Englisch, 2520 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 4600 g
ISBN: 978-3-03785-326-9
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Produktionstechnik
- Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Technologie der Oberflächenbeschichtung
- Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Pulvertechnologische Verfahren
- Technische Wissenschaften Technik Allgemein Konstruktionslehre und -technik
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Maschinenbau Konstruktionslehre, Bauelemente, CAD
- Technische Wissenschaften Technik Allgemein Technische Optik, Lasertechnologie
- Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Metallurgie
- Technische Wissenschaften Umwelttechnik | Umwelttechnologie Abfallwirtschaft, Abfallentsorgung
Weitere Infos & Material
Preface, Sponsors and Organizers
Chapter 1: Advanced Engineering Materials
Microstructures and Thermostability of Spray Formed Nb-Containing High Speed Steel
SERS Study of Malachite Green on Silver Nanocaps Arrays
Study on the Reaction of TDI and PPG with Organo-Tin Mixed Catalyst
Photocatalytic Degradation of Various Dyes by Strontium Titanate Nanoparticles
Study on the Heat-Press Bonding Optimum Technics of Stitchless Apparel
Technology Study of Polypropylene Hollow Fiber Membranes-Like Artificial Lung Made by the Melt-Spinning and Cold-Stretching Method
Novel Blend Films Prepared from Solution of Collagen and Cellulose in 1-Allyl-3-methylimidazolium Chloride Ionic Liquid
A Study of Clay Material Properties in Stop-Motion Animation
Direct Synthesis of Dimethyl Carbonate Form Methanol and Carbon Dioxide Using H3PW12O40/Ce0.1Ti0.9O2 with Ionic Liquid Catalysts
A Comparative Study on the Effects of FSS with Different Elements on the Characteristics of Radar Absorbing Materials
Characterization of Cobalt-Based Catalyst Supported on TiO2 Nanofibers for Fischer-Tropsch Synthesis
Stress Analysis of Laminated Glass under Uniform Lateral Pressure
Hydrochloric Acid Corrosion Behavior of Nb2O5-Al2O3 Ceramics Prepared by Microwave Sintering
Synthesis and Crystal Structure of the Cobalt (II) Complex with Mixed-Ligand
A New Method for Processing Ceramics with Cracked Glaze
Growth of Cu2ZnSnS4 Thin Films by Sulfurization of Co-Sputtered Metallic Precursors
Investigation of the Bird Shape Effects on the Simulation Results of Bird Striking Laminated Aircraft Windshields
Surface Morphology and Infrared Absorption of Silicon Irradiated by Picosecond Laser Pulses in SF6
Stimulation Mechanism of SDS Nanoemulsion in Tight Gas Reservoirs
Preparation and Characterization of Biodegradable Polylactic Acid/Gelatinized Cornstarch Foams
Study on the Treatment of High Salinity Oil Waste Water by Reverse Osmosis Technology
Study on the Kinetics and Optimization of Technological Process of Microwave - Vacuum Drying of Bleached Shellac
Modal Analysis of Montmorillonite in Bentonites Using Phase Mixing Equation
Synthesis of a Novel Fluorene Derivative for Polyfluorenes: 7,7'-di(5-bromothiophen-2-yl)-9,9,9',9'-tetraoctyl-2,2'-bifluorene
Study on In Situ Ti(CN) Particle Reinforce Composites Coating Processed by Nitrogen Shielded Arc Welding Technique
The Study on BFRP Binding Force of Secondary Compression Tests of Concrete Short Columns
Influence of Asymmetry on Extraordinary Optical Transmission through Periodic Arrays of Triangular Holes
Effect of Normalizing on Texture and Deep-Drawing Property of 10Cr17 Ferrite Stainless Steel
Viscosity and Optical Properties of Sodium Alginate Aqueous Solutions of High Concentrations
Study on Performance of Diesel Engine Supplied with Methanol-Diesel Blended Fuel
Preliminary Study on Nanometer Grouting Materials
Investigation of Simple Beam Stiffness Amended Model Based on Finite Element Analysis Results
Research on Pavement Performance with Warm Mix Asphalt Concrete
Synthesis of Phenothiazine Derivatives Containing Hetero Atom and Analysis of Conductive Polymer
A Composite Structure Multi-Parameter Sensor Based on an Embedded Fiber Grating
Influence of Reinforcing Materials on the Properties of Woven Spacer Fabric Composite Sandwich Panels
Preparation and Characterizations of Polysulfone Flat Ultrafiltration Membranes
The Effect of Percentage of Primary a on Mechanical Properties of Bimodal Microstructure of TC4
Effect of Polyurethane with Different Elastic Modulus on the Response of Aircraft Windshield against Bird Strike
Noise Suppression of Optical Voltage Transducer by a Robust Control
Study on the Calamine/Sodium Alginate Modified Viscose Fiber
Study on Refining Technology of Low-Sulfur Steel
Explosive Characteristic of Pulverized Coal Explosion
Potential of Energy Saving and Technical Measures in Sintering in China
Optimization of the Components of Medium Producing Dextran from Immobilized Cells of Leuconostoc mesenteroides
Picosecond Laser Microstructuring for Black Silicon Solar Cells
Study on Superelasticity and Microstructure of TiNiV Shape Memory Alloy by Medium-Temperature Treatment
The Utility Classification and Heating Process Analysis in Silicon Steel
Study on the Performance of Hydrophobic Association Water-Soluble Polymer with Strong Association Ability
Fabrication and Characterization of Regenerated Cellulose/TiO2 Nanocomposite Hybrid Fibers
Fabrication of NiTi Alloy Coating on 2Cr13 Stainless Steel by Laser Cladding
Enhanced Corrosion Resistance and Damping Capacity of As-Cast AZ91 Magnesium Alloys with Ce Addition
Influence Study of Reinforced Fiber on the Impact Resistance Performance of Recycled Aggregate Concrete
Fuel Properties of a Two-Phase Biodiesel Emulsion
Coal Hybrid Heavy Aromatics Vehicle by Fuel of Experimental Research
The Influence of Thermal Exposure on the Microstructure Evolution of a Nickel-Base Single Crystal Superalloy
Effect of the Fibre Morphology and Aging Conditions on the Mechanical Properties of Hemp Fibers
Influence of Preparing Conditions on the Property of a New White-Light Long Afterglow Phosphor Sr2SiO4: Pr3+
Study on the Structure and Phase Transition of Sm Substituted BiFeO3 Nanoparticles
Thermal Performance and Dehydration Kinetics of KAl(SO4)2•12H2O as Phase Change Material
Preparation of Hexagonal Fe3O4 Nanometer Particles via Weakly Magnetic Field Assisted Oxidation Co-Precipitation
Properties of Nano-ZnO Films Deposited by RF Magnetron Sputtering for SAW Biosensors
Convenient Hydrothermal Synthesis of Zeolite a from Potassium-Extracted Residue of Potassium Feldspar
Preparation of Nano-Fibrous Poly(L-lactic acid) Scaffold with Hierarchical Pores
Behavior of Continuous FRP Rectangular Spirals as Shear Reinforcement for Concrete Beams
Study on the Nanoconfinement-Induced Breaking of Helical Symmetry in Metal Nanowires
Preparation of Three-Dimensional Ordered Macroporous Perovskite-Type LaFeO3 Oxides
Preparation and Dielectric Properties of Dy-B-Si-O Glass-Doped Ba0.6Sr0.4TiO3 Ceramics
Electrochromic Properties and Raman Spectroscopy Analysis of Tungsten Oxide Thin Film by RF Sputter
Probing Swelling and Shrinking Process of Polystyrene Film by In Situ Ellipsometry
Effect of Welding Residual Stress on Fatigue Performance of the Welded Joints Treated by Ultrasonic Peening
Synthesis of AlN Powders by Carbothermal Reduction-Nitridation Reaction of Nonhydrolytic Al2O3 Gels with CaF2 Addition
Reduction Kinetics of Bayan Obo Coexisted Iron and Niobium Ore by Carbon-Bearing Pellet
Study on Microstructures and Mechanical Properties of AlSi9Cu3 Aluminum Alloy Fabricated by Liquid Forging
A Modified Coupling Method to Solve the Integrated Equations of Velocity and Temperature Fields in 3D FEM
Preparation and Ferroelectric Properties of Sol-Gel Derived (Ba0.95Ca0.05)TiO3 Ceramics
Friction and Wear Behaviors of PTFE Composites Reinforced with Different Fillers
Unascertained Measurement Model for Water Safety Assessment
Adaptive Control Design for Hydrogen Production via Autothermal Reforming of Methanol
Study on Interfacial Tension and Flammability of Mg-Ca-Ce Alloy Melt
Removing of Si in the NaOH Molten Salt Reaction of Titanium Slag to Produce TiO2
Coating of Ti64 Bearings in Air by Using a Q-Sw Laser
Morphologies and Crystal Phase Control of Calcium Carbonate Using “Crew-Cut” Micelles of Poly (styrene)-b-Poly (acrylic acid) as a Crystal Growth Modifier at Room Temperature
The Comparison of the Adsorption Performances of Phenol onto H103 Resin and XAD-4 Resin
Study on the Mechanical Properties and Frost Resistance of Recycled Concrete Prepared by Village Construction Wastes
A PMA-Based Collaborative Strategy for Reliability Design and Optimization of Multidisciplinary Systems
Synthesis of a Novel Donor Unit for D-A Type Polymers: 2,7-di(5-Bromothiophen-2-yl)-10-Hexadecyl-Phenoxazine
Study on Refining Technology for Reducing the Content of T[O] in Steel
Generation Characteristics of Polycyclic Aromatic Hydrocarbons during Blending Coal Coking
Preparation and Characterization of Multiwalled Carbon Nanotubes Deposited by Europium Hydroxide
Inhibited and Enhanced Spontaneous Emission Using Silicon-Based on Finite Thickness Photonic Crystal Waveguides
Evaluation of Relations among Basic Mechanical Properties of Concrete with Machine-Made Sand
Design for Optimal One-Dimensional Surface Profile of EVA on Solar Cell Modules
Corrosion Behavior and Mechanical Properties of Reinforcing Bar HRB400 in NaCl Solution
Influence of Nano-Serpentine on Tribological Behaviors and Wear Process of Hybrid PTFE/Kevlar Fabric Composites
Electrochemical Study on the Effect of Xanthine on Electrodeposition of Nanostructured Pt Thin Films and Pt(IV)-Xanthine Interaction
Fabrication of Unfired Porous Quartz Brick Used the River Sands from the Yangtze River in China
Study on the Properties of PVDF/LCP Blending Membranes
Review of Mix Proportion Design Methods for Fly Ash Concrete with Machine-Made Sand
Effect of Amorphous and Nanocrystalline Inoculant on Microstructure and Mechanical Properties of High Chromium Cast Iron
Study on the Stability of Insect Wax during Storage Period
Preparation and Properties of Thermo-Sensitive Molecularly Imprinted Hydrogels
Study on Rotary Object Recognition Technique from the Complex Background
Research on the Hydrothermal Processing of Mica-Titanium Pearlescent Pigment Precursor
Effect of Compression Ratio and Lay Angle of Metal Net on the Mechanical Properties of Metal Net-LVL Composite
Finite Element Simulation of Perfect Bonding for Single Fiber Pull-Out Test
Surface Topography of Vinyltriethoxysilane Films Deposited on the Silicon Dioxide Substrate (0001) Investigated by Atomic Force Microscopy
Continuous Cooling Transformation Behavior of Vercooling Austenite of Low Carbon-Manganese Steel
Study on Foam Properties of Alkylbenzene Sulfonate Gemini Surfactants
Research on the Confidence Interval of Indirect Detection
Effects of the Particle Size Variety of Metal Oxide on the Absorption Property of Long-Wavelength Infrared Laser
Preparation and Properties of Halogen-Free Flame Retardant Polyurethane Foams
Study on Dehydration Process of Wet Natural Rubber by Single Screw Dehydrator and Properties of Dry Natural Rubber
The Assembly Success Rate and the Estimation of Assembly Time for a Flexible Assembly System
Photocatalytic Activity of Bi2O3 Prepared by Different pH Value
Study on Influence of Modified SiC Nano-Powders on the Microstructures and Work-Hardening Properties of ZGMn13
Data-Conversion and Displaying for Numerical Simulation of EMCC with FEM-FVM-Joint Method
A Comparative Study of Monomers on the Preparation of Permselective Functional Packaging Materials
The Development and Performance Evaluation of Hydrophobic Association Polymer Pre-Cross Linked Particulate
The Impact of Reflux Ratio on Rectification Column Theoretical Plate Number
Reliability Study of CNC Machining Centers
Dyeing of Degummed Silk Fibers with Anthocyanins in Red Cabbage
Influence of Adding Different Poly (ethylene glycol) in the Biosynthesis of Bacterial Cellulose
An Experiment Study on Woven Fiber Reinforced Rubber Composite Armor against Shaped Charge Jet
The Preparation of Cu2ZnSnSe4 Films by Selenization of the Oxide Precursors
A Study on Microstructures and Creep Behaviors in the Mg-3Sr-xY Alloys
Finite Element Analysis of 5MW Fiberglass and Carbon Fiber Wind Turbine Blade
The Development and Performance Evaluation of Green Cross-Linked Movable Gel
Preparation and Characterization of Ni-Containing Aluminophosphate Molecular Sieves
The Effect of Reinforcement-Length of Carbon Fiber Reinforced Bonding Composites on Circular Tubes under Flexural Condition
The Effect of Uniaxial Stretching on the Crystallization Behaviors of Polylactic Acid Film
The Preparation and Characterization of Carbon Nanostructures Catalyst and its Catalytic Activity
The Pressure Gas Line Characteristic Curve Shape Based on Origin
Fabrication and Properties of the PVDF/PVDF-g-PMMA Blend Hydrophilic Membrane
Characterization of Five Natural Resins and Waxes by Differential Scanning Calorimetry (DSC)
A New Approach for Colloidal Crystal Fabrication with the Template of Reversible Stress Wrinkle
The Optimization Design of Laser Welded Sandwich Plate Structure
Effect of Si-SiC Additives on Properties of Tap Hole Clay
Theoretical Investigation of Energy Levels Splitting of CsCdBr3:Pr3+ Crystal
Preparation of Highly Exfoliated Epoxy/Clay Nanocomposites by the Method of Ultrasonication Dispersion-Microwave Cure
Spatial Location of Zerovalent Iron Nanoparticles in Montmorillonite
Effect of Metal Intercalating on Transmission Characteristics of One-Dimensional Photonic Crystal
Synthesis, Electrical and Humidity Sensing Properties of BaTiO3 Nanofibers via Electrospinning
Effect of In Situ Formed Mullite on Properties of High Alumina ULC Castables
Synthesis of Tung Oil Anhydride-Ester Polyol
Photolithography and Photochemical Reaction of Copolymer Containing Anthracene in Langmuir-Blodgett Films
Synthesis and Adsorption Properties of Crosslinked Starch Microspheres (CSM)
Indonesia Coal Explosive Characteristic of Pulverized Coal in Experiment
Preparation and Characterization of Aluminium-Doped SnS Thin Films
Condition Analysis of Nitrogen Remove from the Mixture of Municipal Wastewater and Fecal Sewage
Ferroelectric and Dielectric Properties of La2O3-Doped BaTiO3 Ceramics
Comparative Study on Microstructure and Texture of Ti-IF Steel Sheets Produced by Different Hot Rolling Processing
Progress towards the Automatic Assembly of Carbon Nanotubes by Dielectrophoresis
Enhanced Optical Absorption in Modified One-Dimensional Metallic Photonic Bandgap Structures
Application of the Soil Nailing Wall on Foundation Engineering
Dislocation Generated by Electron Irradiation
Chapter 2: Surface Engineering/Coatings
The Characteristic of the Coating Prepared on Magnesium Alloy AZ91D by Micro-Arc Oxidization
Fast Electroless Ni-P Coating on AM60 Magnesium Alloy at Low Bath Temperature
Diagnosis of White Spot Defects Drived from Gear Wheel Carbonization and its Corresponding Measures
Simulation and Experimental Measurement of Ultrasonic Waves Propagation Velocity in Trabecular Bone
Primary Study on Electron Beam Surfi-Sculpt of Ti-6Al-4V
Reliability Laboratory Analysis of PCB Surface Coating Based on ENEPIG
Self-Prote
