Liu | Material and Environmental Science, Building Engineering, Biomedical and Bioinformatics Technologies | Buch | 978-3-03785-808-0 | sack.de

Buch, Englisch, 750 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 200 g

Liu

Material and Environmental Science, Building Engineering, Biomedical and Bioinformatics Technologies

Selected, peer reviewed papers from the 2013 International Conference on Advanced Engineering Materials and Architecture Science (ICAEMAS 2013), July 27-28, 2013, Xi’an, Shaanxi, China

Buch, Englisch, 750 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 200 g

ISBN: 978-3-03785-808-0
Verlag: Trans Tech Publications


Collection of selected, peer reviewed papers from the 2013 International Conference on Advanced Engineering Materials and Architecture Science (ICAEMAS 2013), July 27-28, 2013, Xi’an, Shaanxi, China. The 163 papers are grouped as follows: Chapter 1: Material Science and Engineering;Chapter 2: Civil Engineering, Building and Construction Materials and Technologies, Architecture and Geo-engineering Applications;Chapter 3: Transportation and Traffic Engineering, Environmental Engineering, Urban and Landscape Planning; Chapter 4: Biomedical, Bioinformatics, Biology Systems and Medical Informatics; Chapter 5: Automation Methods in Industry and Manufacture, Modelling and Analysis; Chapter 6: Computing and Information Science;Chapter 7: Management Engineering.
Liu Material and Environmental Science, Building Engineering, Biomedical and Bioinformatics Technologies jetzt bestellen!

Autoren/Hrsg.


Weitere Infos & Material


Preface and Organizing Committee
Chapter 1: Material Science and Engineering
The Composition and Uses of the Building Material
Oxidation of CVD Growth Single-Layer Graphene
Microstructure and Corrosion Properties of Mg-Zn-Ca-Zr Alloy for Biomedical Application
Changes of Natural Frequencies of Industrial Steel Hall due to Simplifications of Numerical Model
Fabrication of PbO-Type Structure ß-FeSe Superconductor Ceramics by Solid State Reaction Method
Preparation of Ti-Based Hybrid Membranes and its Application for the Removal of Copper(II) Ions from Water
Size-Dependent Piezoelectric Coefficient d33 of Nanoparticles
Synthesis and Structure of a Two-Dimensional Metal-Organic Framework: [Fe(C7H3NO4)(H2O)2]n
The Migration and Distribution Characteristics of the COD in the Enriching Process of HPF Coking Desulfurization Waste Solution
Research on Cu(II) Transfer Using Supported Liquid Membrane
Study of Coating Binder Migration and Affected Parameters
Influence of Sintered Temperature on Spinel LiMg0.06Mn1.94O4 Synthesized by Flameless Liquid-Phase Combustion Method
The Experimental Study on the Fire Suppression Effectiveness of Water Mist with the FeCl2 Additives
Structure Studies on Order Assemblage of ManganeseII Complexes
Equation of State of Detonation Products Based on Chemical Equilibrium
Dynamic Fracture of Ductile Metals at High Strain Rate
Cu2S and AlN Precipitates in Fe-3%Si-0.5%Cu Steel Produced by Low Slab Reheating Technique
Application of Nanoscale Zero Valent Iron Combined with Impatiens Balsamina to Remediation of E-Waste Contaminated Soils
Removal of Reactive Dyes from Wastewater by Magnesium Hydroxide Coagulation Assisted with Ultrasonic
Preparation of Hydrophobic Microporous Polypropylene/Isotactic Polypropylene Blending Membranes via Thermally Induced Phase Separation for Vacuum Membrane Distillation
Anodic Behavior of Pb-Ag-Ca-Sr Alloy in Zinc Electrowinning
Effect of Extrusion Route on Grain Refinement during ECAP Process
Influence of Caustic Soda Flakes-Phosphogypsum on Activation and Microstructure of Carbide Slag-Flyash
Study on the Performance of Mg/Al Composite Anode
Effects of Insolation on Optical Properties of Tricot Invisible Curtain
Chapter 2: Civil Engineering, Building and Construction Materials and Technologies, Architecture and Geoengineering Applications
Analysis of the Reinforced Masonry on Shear Capacity
Comparative Analysis of the Reinforced Masonry Structure Bearing Capacity with Different Methods
Experimental Study on Simply Supported Reinforced Concrete after Fire
Analysis of Crack Patterns of 500MPa Reinforced Concrete Beams
Study on Rain Water Drainage System Plan Based on SWMM
Study on Causes and Solutions of Cracks on Concrete Hollow Block Wall
Three-Dimensional Numerical Simulation Analysis of Security of the Underground Diaphragm Wall Based on the Ring Beam Supporting System
Discussion on the Site Selection of Handan History Settlements
Research Status on Muddy Water Seepage Theory
Genetic Algorithm for Searching for Critical Slip Surface in Gravity Dams Based on Stress Fields
Normalized Soil Deformation Induced by Underlying Bedrock Fault
Finite Element Analysis of the Destroy of Pressure Reducing Cone's Column in the Cement Silo
The Study on Heating Running Schemes of Solar Energy Combined with Municipal Heating
Influencing Factors and Control Measures of the Saturation Line of Tailing Dams
Experimental Study on the Rutting Deformation Mechanism of Asphalt Pavement
Experimental Study of Performance of Self-Stress Lightweight Aggregate Concrete Filled Steel Tubes after Exposure to Fire
Study of Post-Fire Performance of Steel Fiber Reinforced Ceramsite Concrete Filled Steel Tubes
Research of Post-Fire Mechanical Property of Steel Fiber Reinforced Ceramsite Concrete Filled Steel Tubes after Exposure to Fire
Study of Post-Fire Axial Compressive Behavior of Self-Stress Ceramsite Concrete Filled Steel Tubular Short Columns
Numerical Analysis of Fire Performance of a Spacial Pre-Stressed Steel Structure in Fire
Analysis of FRP Chimneys Liners under Wind and Seismic Load
Mechanical Behaviors of Square Timber Columns Reinforced with AFRP under Axial Compression
The Effect of Human Activity on the Distribution of Soil Nitrate Nitrogen in Unsaturated Zone
Wind-Induced Vibration Control of Benchmark Model with Damper
Chinese Traditional Garden of Water and the Chinese Culture
Instantaneous Stochastic Optimal Control of Seismically Excited Structures Based on Time Domain Explicit Method
A Construction Technology for Buildings Horizontal Movement
The Different Pavement Combination Deflection Change Law Discuss
Static Load Test of Frame-Structure Slab
Application of the CRD Method in Construction of an Ultra-Shallow, Ultra-High Section and Large-Span Mined Tunnel
The Engineering Geological Characteristics Evaluation of the Weak Soft Soil of the Xingheng Highway Test Section
Application of Superiority Evaluation Method in Engineering Bidding Evaluation
Dynamic Response Sensitivity Analysis of Asphalt Pavement to Moving Point Loads
Comparative Analysis on Seismic Performance of Steel Frame with Different Forms of Symmetric Enhanced Nodes
Innovation of Utility Tunnel Nodal Design Taking Utility Tunnel in Laiyuan as Example
Influence Analysis of the Incorrect Construction Sequence on Concrete Strength of Cast-in-Place Piles
Heat Damage of High-Temperature Rock Tunnel by Weighted Residual Method in Tibet Plateau
The Technique for Simulation of Broken Defects in Model Pile Tests
The TBM and Space-Curved Belt Conveyor in Jinping-II
Mathematical Analysis on Helicoids Architectural Form
Research on Application of Slow-Down Dome in Rural Highway Security Engineering
Research against the Effect of Inertia Loads on Dynamic Responses of a Simply Supported Beam
The Influence of Lateral Fill on Foundation Bearing Capacity of High-Stacked Culverts
The Creep Impact on the Performance of Super-Long Reinforced Concrete Structures
Economic Analysis on Concrete-Filled Steel Tube Structure
Numerical Analysis on the Influence of Joints Inclination on the Characteristics of Deformation and Stability of Tunnel
Experiment and Analysis on Influence of Moisture Content on the Mechanical Characteristics of Residual Soil of Granite
Macro-Mechanical Parameters Analysis of Rock Slope Based on the Partition Classification Method
Effect of Temperature on the Quality of City Sewage Sludge Shale Brick Products
Research Progress of Self-Cleaning Architectural Coatings
A Study on the Change Law of Fundamental Frequency of Rigid Pavement
Design and Application of Long-Short-Pile Composite Foundation
Experimental Study of Strengthening of Reinforced Concrete Beams with Externally Bonded GFRP Sheets
Analysis on In-Plane and Out-Plane Instability Coupling of Steel Bowstring Arch Bridge with Box Section Single Rib
A Thick/Thin Plate Element Based on the Area Coordinate Analytical Trial Functions
Approximate Theoretical Analysis on Excavation Disturbed Zone of a Soft Rock Slope in Suining-Ziyang Expressway Engineering in Southwestern China
Stability Analysis on Surface Layer of an Expansive Clay Slope with Consideration of Expansive Pressure
Analysis on Calibration System of SBI Test for Building Materials
Numerical Simulation for Progressive Collapse of Continuous Girder Bridge Subjected to Ship Collision Based on Three-Stage Simulation Method
Research on Template Concrete Board Security of Early Removal Connection Attached Support-System
The Research of Innovative Expression on the Materials of Building Skin
Experimental Study on Bond Characterization of Hybrid-Bonded FRP to Concrete Interfaces
Study on Axial Force of Multi-Stage Fracturing String in Horizontal Wells
Analysis of the Impact of City Construction Load on City Geology Security
Research on Surface Overpressure and Deformation of Underground Frame Beam under Internal Blast Loads
Surface Overpressure Distribution and Dynamic Response of the Retaining Wall of the Underground Structure Subjected to Inner Explosion
Study of Grouting Reinforcement to Disturbance Soft SOIL Caused by Large Diameter Slurry Shield Construction
Stury of Post-Failure Constitutive Relation Based on SMP Criterion
The Research on Earth Pressure behind Inclined Retaining Wall Considering Arching Effects
ANSYS Analysis of Early Removal Template Support-System Security
Axial Force Analysis of the Single Pile Based on FLAC3D
Chapter 3: Transportation and Traffic Engineering, Environmental Engineering, Urban and Landscape Planning
Characterization of Heavy Metals in the Surrounding of Municipal Solid Waste Incinerator (MSWI) and Health Risks Assessment via Inhalation in Shenzhen Nanshan, China
An Explorative Study on Landscape Design of Urban River Channels Based on Ecological Restoration
Characteristics Analysis of Solar Radiation Distribution in Hefei Region
On the Water Environment of Kaifeng City of the Northern Song Dynasty
Evaluation of Health Effects of Fine Particulate PM2.5: A Review
Research of Agricultural Non-Point Source Pollution and Prevention Measures
Queue Spillback in Braess's Paradox Considering Dynamic Traffic Assignment
Uncertain Factors and their Effects that Need Considering in Fire Engine Routing: A Short Review
Study on Risk Factors for Transport Crashes Involving Fatigued Professional Drivers
The Research on Mineralization of Desalinated Water by Dissolving Ore for Entering into Municipal Water Supply Network
Influences of Biochar Aging Processes by Eco-Environmental Conditions
Research on Relationship between Air Permeability and Structure Parameter of Basalt Woven Filter Fabric
Long-Term Carbon Sequestration and Environmental Immobilization of Biochar: A Review
License Plate Location Based on Texture Analysis and Projection Approach
The Ranking of Optimization Schemes of Public Traffic Line Network Based on Set-Pair and Entropy Analysis
Based on the Tropical Island of Hainan Land Use Types IDRISI Spectral Characteristics
Cultural Planning for Urban Spaces: Cultural Turn of Contemporary Urban Planning
Research on Designing for Low Carbon and Liveable Residence in Subtropical Region (Southern Guangxi Province in China)
The Practice of the Symbolic Significance in Landscape Design
Overview of Space Synergy of Urban Building Complex
Public Bicycle System Station Deployment and Scale Prediction
Research on the Critical Attributes of Travel Mode Choice Utility Function
Chapter 4: Biomedical, Bioinformatics, Biology Systems and Medical Informatics
Effect of Three Major Polyphenols in Red Wine on Sodium Channel Current in Mouse Dorsal Root Ganglia Cells
Determination of the Content of Imperatorin in Radix Angelicae Dahuricae and Evaluation of the Measurement Uncertainty in Using High Efficiency Liquid Chromatography
AAM Based Facial Feature Region Segmentation in Traditional Chinese Medicine Complexion Diagnosis
Effects of Solvents and Extraction Methods to Extraction of Fructus Leonuri
Study of SMA as Protective Colloid on the MF-Resin Micro-Encapsulation
Diatom Distributions in the Eastern Yangtze River and the Main Lakes, Jiangsu Province, China, and their Significance for the Forensic Diagnosis of Drowning
Biological Effects of p53 Mutation W248 and H175 on MCF-7 Cells
Microwave Extraction of Triterpene Glucoside from Fructus Leonuri
Study on the Antimicrobial Effect of the Extracts of Fruits of Herba Leonuri
Mitotic Catastrophe Induced by Chelidonine on Human Gastric Carcinoma SGC-7901 Cells
Population Genetic Data of 21 Autosomal Loci in Guangdong Han Population
New Wound-Dressing Coaxial Electrospun Nanofibers Dressing
Interference Elimination of Sulfide Determination by Iodometry
A RS/GIS-Based System for Monitoring Malaria Epidemic
An Images-Fusion Method of Malaria Epidemic Remote Sensing
The Role of Beclin1 Gene in Autophagy and Apoptosis Induced by Ionizing Radiation in MCF - 7 Cells
Effects of Ginkgo Biloba Extract on Liver Protection for Type 2 Diabetic Rats
Effect of Chelidonine on the Expressions of Cdk1 and CyclinB1 Proteins in SGC-7901 Cells
Antibacterial Activities of Chemical and Biological Food Preservatives towards Food Spoilage Bacillus among and within Species
Study on Apoptosis of Human Promyelocytic Leukemia HL-60 Cells Induced by Fucosterol via Death Receptor Pathway
Study on Apoptosis of Human Promyelocytic Leukemia HL-60 Cells Induced by Fucosterol via Mitochondrial Pathway
EEG-EMG Signal Processing and Analysis for the Neuromuscular Activity Patterns with Three Motion Modes under Two Time Intervals
Colorimetric Detection of Melamine Based on Poly-Thymine Stabilized Gold Nanoparticles
An Integrated Clustering Algorithm and its Application in Surgical Navigation
Chapter 5: Automation Methods in Industry and Manufacture, Modelling and Analysis
Study on the Application of Video Surveillance System of Expressway Construction Based on 3G
Development of Floating Offshore Wind Turbine and the Mooring System
Analysis on Dynamic Response of the Foundation Pit Supporting Structure under Vehicle Loads
Research of Small and Medium-Sized Motor Yacht Form Design Based on Imagines Acknowledge Theory
Dynamic Analysis of the Wind Turbine Tower
Modal Analysis of Wind Turbine Blades Based on ANSYS Modeling
A Bearing Fault Diagnosis Method Using Fusion of Lie Group Classifier and GA
Chapter 6: Computing and Information Science
Study of High Dimensional Orthogonal Vector-Valued Wavelet with Scale 4
Study and Application on Airport Clearance Based on Secant Method in Gauss Projection Algorithm for Inverse Solution
Prediction of Detonation Velocity of Aluminized Explosive by Artificial Neural Network
Plate Character Segmentation Algorithm Based on Projection Feature and Prior Knowledge
Accelerative Genetic Algorithm-Based Parameter Optimization in Storm Intensity Formula
Experimental and Numerical Study on the Suppression of Pool Fire with Water Mist
Research on the Distribution Route Optimization of Agricultural Product Logistics Based on Particle Swarm
The Experimental Study on Extinguishing Aircraft Cabin Fire by Water Mist
Chapter 7: Management Engineering
Corporate Strategic Choice Basing on Externality Internalization
Evaluation the Environmental Awareness of Listed Companies by FAHP
Tourism Marketing Strategies for Chongqing University City
A Study on Incentive Mechanism for Star Hotel Employees against the Background of IT Application
The Whole Process Tracking Audit of Municipal Engineering Cost
Approaches and Processes of the Project Management


Ihre Fragen, Wünsche oder Anmerkungen
Vorname*
Nachname*
Ihre E-Mail-Adresse*
Kundennr.
Ihre Nachricht*
Lediglich mit * gekennzeichnete Felder sind Pflichtfelder.
Wenn Sie die im Kontaktformular eingegebenen Daten durch Klick auf den nachfolgenden Button übersenden, erklären Sie sich damit einverstanden, dass wir Ihr Angaben für die Beantwortung Ihrer Anfrage verwenden. Selbstverständlich werden Ihre Daten vertraulich behandelt und nicht an Dritte weitergegeben. Sie können der Verwendung Ihrer Daten jederzeit widersprechen. Das Datenhandling bei Sack Fachmedien erklären wir Ihnen in unserer Datenschutzerklärung.