Sonstiges, Englisch, Band Volumes 577-578, 736 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Key Engineering Materials
Advances in Fracture and Damage Mechanics XII
Erscheinungsjahr 2014
ISBN: 978-3-03795-545-1
Verlag: Trans Tech Publications
Selected, peer reviewed papers from the 12th International Conference on Fracture and Damage Mechanics (FDM 2013), September 17-19, 2013, Sardinia, Italy
Sonstiges, Englisch, Band Volumes 577-578, 736 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Key Engineering Materials
ISBN: 978-3-03795-545-1
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Interference Analysis between Crack and General Inclusion in an Infinite Plate by Body Force MethodStress Corrosion Cracking in Pipeline SteelsStructural Integrity of a Shaft Subjected to Multiaxial Fatigue Loads in Presence of Short CrackBlunt Cracks and Two Parameter Fracture CriteriaFlexural and Shear Capacity Evaluation of Reinforced Ultra-High Strength Concrete Members with Steel RebarsEvolution of Shear Localization in an Elasto-Plastic Cosserat Material under ShearingRecent Developments in Brittle and Quasi-Brittle Failure Assessment of Graphite by Means of SEDPrinciple of Universality in Crack Incubation and PropagationExperimental Soil - Concrete Plate Interaction Test and Numerical ModelsModelling Microstructural Effects on the Mechanical Behaviour of a Friction Stirred Channel Aluminium AlloyNonlinear Thermo-Mechanical Coupled Modeling for the Analysis of Stress Distribution in Air-Plasma-Sprayed Thermal Barrier CoatingsA Parametric Investigation of Surface Initiated Rolling Contact Fatigue Using the Asperity Point Load MechanismThe Cohesive Crack Model Applied to Notched PMMA Specimens Obeying a Non Linear Behaviour under Torsion LoadingMicromechanical Modelling of Advanced Ceramics Using Statistically Representative MicrostructuresThe Role of Microstructure on the Fracture Behaviour and Statistics of Advanced CeramicsEffect of Contact between the Crack Faces on Crack PropagationStatistical Ensemble Interactions in Microstructures where Damage Events PresentEvaluation of the Fatigue Limit of Materials in Static Test Using Thermal Analysis: Effect of the Cross-Head SpeedEffect of Carbon Milled Fiber Addition on Interlaminar Fracture Toughness of Carbon Fiber Reinforced PlasticsEffect of Crystallinity on Mechanical Properties of Carbon Fiber Reinforced PolypropyleneMechanical Characterization of Bamboo Fiber-Reinforced Green CompositesCharacterization of Al Metal Matrix Composites Produced by the Stir-Casting MethodFatigue Strength of Aluminum Cast Alloy in Plant OilImprovement of an Ellipsoidal Void Model for Simulating Ductile Fracture BehaviorFracture Toughness of Advanced TRIP-Aided Martensitic SteelsProbabilistic Failure Analysis of Steel Structures Exposed to FatigueStrength Analysis of Energy Storage Flywheel Wrapped with Composite MaterialGreen's Function Solution of Multiple Shallow-Buried Cavities and Inclusions in Elastic Semi-SpaceAssessment of UMTS and Averaged SED Fracture Criteria for U-Notched SpecimensEvaluation of Generalized MTS Criterion for Mixed-Mode Fracture of Polyurethane MaterialsEffects of Variable Loading on Residual Fatigue Life of the Railway WheelsetA Multiaxial Notch Fatigue Methodology to Estimate In-Service Lifetime of Corroded Cast Iron Water PipesLength Influence on Stress Concentration in Orthotropic PlatesLamb-Wave Based Technique for Multi-Site Damage DetectionApplication of the Monkman-Grant Relationship for Ultrafine-Grained Metallic MaterialsMultiscale Modeling of Nanocomposite Structures with DefectsSurface Damage and Fatigue Strength of Ultrafine Grained Copper Treated by Mild AnnealingCurrent Activities for Standardization of Test Method for Interfacial Fracture Toughness of Thermal Spray Coatings in JapanNumerical Prediction of the Long Term Creep Crack Growth Behaviour in Type 316H Stainless SteelCrack Deflection from the Interface between Two Orthotropic Materials-Effect of Higher Order Terms in Asymptotic AnalysisAnisotropic Damage Phenomena in Filled Elastomers: Experimental Observation and Constitutive ModelingFE Modeling of FRP-Concrete Interface for very High Cycle Fatigue BehaviorNumerical Lifetime Prediction of Polymer Pipes Taking into Account Residual StressNumerical Modelling of the Change in Stiffness Properties of Cross-Ply Laminates Subjected to Large Bending CurvaturesVirtual Testing for Fracture Toughness, Fatigue Crack Growth and Fatigue Life Data Estimation of Metallic ComponentsEffect of Fabric Weave Geometry and Strand Orientation on Mode I Interlaminar Toughness of Glass-Epoxy LaminatesA Study of Rock Crack Fracture under Different TemperaturesPath-Independent J-Integral Based on Finite Deformation TheoryGrain Boundary Fracture Behavior and Segregation of P under Low Tensile Stresses in Steel 2.25Cr1Mo and 12Cr1MoVDamage-Involved Response of Two Colliding Buildings under Non-Uniform Earthquake LoadingPractical Method for Estimating Corrosion Depth of Uncoated Carbon Steel Using Thickness of the Corrosion-Product LayerFracture Toughness and Cracking Behaviour of SCC Compared to VCHypersingularities in Three-Dimensional Crack Configurations in Composite LaminatesInfluence of Crack Front Shape on 3D Numerical Modelling of Plasticity-Induced Closure of Short and Long Fatigue CracksCorrosion Behavior of a WC/C Coated 7075-T6 Aluminum AlloyFatigue Behaviour of Thin Coated Al 7075 Alloy with Low Temperature PVD CoatingsThe Competition between Adhesive and Cohesive Fracture at Amicro-Patterned Polymer-Metal InterfaceEvaluation of Elastic Properties of Satin CompositesComputational Modelling of Brittle Failure in Polycrystalline Materials Using Cohesive-Frictional Grain-Boundary ElementsDislocation Clusters and Microcracks in Thin Films of LCF-Tested Austenitic SteelApplication of Laplacian Operators on Noisy Data to Compute Curvature with Proper Orthogonal DecompositionFatigue Crack Growth in Fe Mini-Samples Consolidated by Means of Impact SinteringApplication of Ductile Damage Concepts in the Evaluation of Material Formability during Screw Head Cold FormingModeling of Cure-Induced Residual Stresses in 3D Woven Composites of Different Reinforcement ArchitecturesDetermination of Triaxial Tensile Failure Surfaces for Curing Epoxy ResinsFatigue Performance of Copper Alloys in Seawater EnvironmentInvestigation of Fracture and Electrical Resistivity Parameters of Cementitious Composite for their Utilization in Deterioration ModelsBalanced Energy Dissipation at Propagating Crack Tip in Quasi-Brittle Materials? - Analysis via Soft-Computing MethodsInfluence of Dissipative Structures Formed by Impulsed Loads on the Processes of Deformation and FractureMass-Optimized Design of Guyed Wind Turbine Tower Using StrutsNumerical Modelling and Bearing Capacity of Reinforced Concrete BeamsDetermination of Stress Intensity Factor for Cracked Brazilian Disc Using Weight FunctionTorsion Characteristics on Drive Shaft of Independent Wheel Drive for Articulated VehicleGiga-Cycle Property of a New Age-Hardened Aluminium Alloy Containing Excess Solute MagnesiumBoundary Conditions in a Multiscale Homogenization ProcedureA Study on the Structural Fracture of Body Structure in Railroad CarRecrystallization Technique of Plastic and High Strain Zones and Fracture in Small Punch Specimen Loaded at Rt and 77K of 304 Stainless SteelPartial Transient Liquid Phase Metals Layer-Surface Coating for Improved Oxidation Resistance and Low Cycle Fatigue Crack Initiation Life at 1073K in Air of TiAl AlloyCracks Interaction due to Sequential Indentation in Curved Brittle Coating: Effect of Relative OrientationDetailed Crack-Tip Stress Field Description in a Specimen Subjected to Mixed-Mode LoadingEvaluation of Fatigue Crack Growth Rates and Threshold Conditions in an Al 2124-T851 Alloy at Different Load Asymmetry Considering Microstructure OrientationEvaluation of Overloading and Crack Closure Effects on Fatigue Crack Growth in an Aircraft 7075-T7351 Al-AlloyEffects of the Interference Level on the Residual Stresses in a Cold-Working Expansion MethodEvaluation of Elastic Structural Integrity of a 70 kW Class Lab-Scale PCHE Prototype under the Test Conditions of HELPModelling Porosity in Quasi-Brittle Reactor Core GraphiteJ Integral Computation for Repaired Cracks with Bonded Composite Patch in Aircraft StructuresCrack Length Estimation from the Damage Modelisation around a Cavityi in the Orthopedic Cement of the Total Hip ProsthesisFinite Element Analysis of the Mechanical Behaviour of the Different Cemented Hip Femoral ProsthesesExperimental Investigation about Surface Damage in Straight and Crowned Misaligned Splined CouplingsSimulation of Adhesion Performance of Mortar-Mortar Interface with Varied Fractographic FeaturesBi-Material Notches under Various Normal-Shear Loading ModesMicrotensile Video Tester for Observation of Banana and Abaca Reinforced Composites FailureAnalytical Design of Gigacycle Fatigue Specimens for Size Effect EvaluationPropagation Behavior of Naturally Initiated Small Crack in Austenitic Heat Resistant Steel under Thermo-Mechanical Fatigue LoadingThe Role of Methane Hydrates in the Failure of a Gas PipelineNumerical Investigation on LEFM Limits under LSY ConditionsModeling Fatigue Damage of ConcreteExperimental and Numerical Investigation of Delamination in Curved-Beam Multidirectional Laminated Composite SpecimenThree-Dimensional Finite Element Analysis of Single-Lap Joints: Effect of Adhesive Thickness and Poisson's RatioExperimental Investigation of Corrosion Processes on Weathering Steel StructuresBEM Analysis of a Piezoelectric Structural Health Monitoring System for Delamination DetectionInfluence of Reinforcement Particle Sizes on the Joining Strength of the FSSWed PVC Joint Compounded SiC Particle in Welded AreaGun Bullet Deformation Analysis for Protection Board DevelopmentEffect of Triaxiality and Lode Angle on the Plasticity Behaviour of a Ti-6Al-4V Titanium AlloyFatigue Characteristics of Nonferrous BoltsUltrasonic Corrosion Fatigue Behaviorof Duplex Stainless SteelEvaluation of Torsional Rigidity for Micro-Lattice PlatesEffect of Processing Layer on Fatigue Strength of Extruded AZ61 Magnesium AlloyFracture Mechanics of Fiber-Matrix Interfaces in Composites under Transverse LoadingThermal Conductivity Design for Locally Orthotropic MaterialsExperiments Method Design Applied to Optimization of Patch Repairs for Cracked PlatesAn Automated Method for the Measurement of Fatigue Crack ProgressionDynamic Crack Analysis in Layered Piezoelectric Composites under Time-Harmonic LoadingA Synthesis of the Fatigue Behavior of Stainless Steel Bars under Fully Reversed Axial or Torsion Loading by Using the Specific Heat LossInner Damage and External Dent in Composite Structures after Impact ? Part I: Experimental ObservationsNumerical Prediction of Damage Interaction during L-Shaped Laminated Composite Structures UnfoldingA Unified Model for Micromechanics Damage in the Asphalt ConcreteFatigue Properties of a Low-Alloy Steel with a Nano-Structured Surface Layer Obtained by Severe Mechanical TreatmentsNodular Cast Iron ? Fatigue Crack Measurement and SimulationThermographic Determination Methodology: Application on Fatigue Limit of AL 2024 for R=-1Selecting a Suitable Specimen Shape with Low Constraint Value for Determination of Fracture Parameters of Cementitious CompositesFracture Characterisation of Reactor Core Graphite under Biaxial LoadingA Study on Impact Damage Analysis of Composite Propeller Blade of Turboprop AircraftThermo-Mechanical Investigation of Ultra-High Molecular Weight Polyethylene for High Strain-Rate ApplicationsLarge Deformation and Failure of Thin-Walled Film at the Post-Buckling DelaminationAn Estimation on the Performance of High Fluidity Anti-Washout Underwater Concrete3D Global-Local Analysis Using Mesh Superposition MethodHigh Accurate Solutions of Nonlocal Elasticity for SphereA Numerical Model to Study the Hydrogen Embrittlement Effect on Low-Alloy SteelsAn Experimental-Numerical Hybrid Method to Determine Dynamic Elastic-Plastic Fracture ToughnessEvaluation of Interlaminar Shear Strength of Longitudinal GRP Railway Bogie Frames Considering Microstructure AspectsThe Danger of Self-Organizing Structures in Materials Subjected to Dynamical Non-Equilibrium ProcessesFailure of the Crude-Oil Tank Induced by Two Independent Corrosion ProcessesPressure Pipe Damage: Numerical Estimation of Point Load Effect IIStudying the Effects of Internal and External Microstructure on Fatigue Strength of Materials by Electromagnetic Excitation TechniqueNumerical Analysis of the Damage in a Flanged JointContact Behaviour of Composite Laminate under Quasi-Static Indentation LoadInitiation of Fatigue Cracks in Bolted JointsInfluence of the Die Bearing Length on the Hydrogen Embrittlement of Cold Drawn WiresStudy of Multi Pass Welding Temperature Distribution in Dissimilar SteelsProbability Distribution Analysis of Rock Salt Creep Parameters Based on Comprehensive Optimal Acceptance CriteriaThe Study on Damage Failure of Pipeline under Flood Using Entropy Identification MethodEffect of Stress Wave Dispersion on Hopkinson Pressure Bar Loaded Fracture TestInvestigation of Bearing Strength of Single-Bolt Double-Lap Joints in Composite LaminateEffects of Ceramic Particle Reinforcement Distribution on the Penetration of FGM ArmorNumerical Observation of Damage and Cracking Behavior in Three-Point Bending Asphalt Mixture BeamNumerical Simulation on the Oblique Penetration of Ceramic Particles Reinforced Metal Matrix Functional Gradient ArmorEffects of Loading Rate on Strength and Failure of Coal Rock from HanchengFracture Toughness of Large Forgings for Power Producing IndustryEffect of Tearing Strength by Variations in Amount of Adhesive in Laminated Film for Liquid PackageLong-Term Monitoring of FRP-Concrete Composite Bridge Deck for Cable-Stayed Bridges Using Optical Fiber SensorsSkin Stringer Debonding Evolution in Stiffened Composite Panels under Compressive Load: A Novel Numerical ApproachDamage and Fracture during Contact between a Spherical Indenter and Ice: Experimental Results and Finite Element SimulationsMolecular Dynamics Studies of Spalling and Melting in Shocked Nanocrystalline PbNumerical Simulation on Failure Process of Rubber-Sleeved Headed Stud Shear ConnectorThe Deflection of Donut Type Hollow Slab Considering Crack BehaviorsEvaluating the Critical Temperature of Creep-Fatigue Interaction a Nickel-Based Powder Metallurgy SuperalloyResearch of Performance about Ceramic Coating on Aluminum Bumper to Resist Hypervelocity ImpactClosed Crack Detection with Nonlinear Instantaneous BaselineComparison between Fracture Behaviour of Pipe-Line Ring Specimens and Standard SpecimensCorrosion and Wear Behavior of CAE Deposited CrN-PVD CoatingsModelling of Impact Behavior of Concrete Subjected to Shock LoadingA Constitutive Model for Bovine Cortical Bone under Cyclic Creep-Recovery LoadingThe Creep and Fracture Behaviour of the Polyethylene PE100Cyclic Creep and Recovery Behaviour of Glass Fibre Reinforced Epoxy CompositeDamage Imaging of Pipes in Nuclear Power Plants Using Torsional Guided Wave ModesThe Influence of Cycling Frequency to Response Loading in Fatigue Tests for Sandwich Beam with Viscoelastic CoreAssessment of Crack Growth from a Cold Worked Hole by Coupled FEM-DBEM ApproachParameter Identification of Crack Growth in Helicopter BladeDynamic Behavior to Fatigue Crack Initiation of a Glass/Epoxy LaminateAnalysis of Thermal Residual Stresses Distribution in Circular and Elliptical Bonded Composite Repair of Metallic Cracked Structures
