Buch, Englisch, 2938 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 4950 g
Buch, Englisch, 2938 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 4950 g
ISBN: 978-3-03835-073-6
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Committees and Acknowledgements
Keynote Presentations
Aspects of Thermomechanical Processing of 3rd Generation Advanced High Strength Steels
Diffusion Bonding of Duplex Stainless Steel and Ti Alloy with and without Interlayer
Development Status, Applications and Perspectives of Advanced Intermetallic Titanium Aluminides
The Influence of Thermomechanical Controlled Processing on Bainite Formation in Low Carbon High Strength Steel
Mechanical Properties of High-Manganese Austenitic TWIP-Type Steel
{111} Recrystallization Texture Evolution in Al-Mg-Si Alloy Sheets Fabricated by Symmetric/Asymmetric Combined Rolling Process
Dynamic Transformation during the Torsion Simulation of Strip Rolling
Factors Influencing the Shearing Patterns in High-Pressure Torsion
The Cube Recrystallization-Texture Related Component in the ß-Fiber Rolling-Texture FCC Metals
Modelling Microstructure and Properties during Annealing of Cold-Rolled Al-Mn-Fe-Si-Alloys with Different Microchemistries
Development of Fracture Assessment Standards in Japan with Weibull Stress
Control of Oriented Extracellular Matrix Similar to Anisotropic Bone Microstructure
Biofunctional Surface Layer and its Bonding Strength in Low Modulus ß-Type Titanium Alloy for Biomedical Applications
Effects of Austenite Conditioning and Transformation Temperature on the Bainitic Microstructure in Linepipe Steels
Chapter 1: Al Alloys
A Numerical Model for Predicting the Zener-Hollomon Parameter in the Friction Stir Processing of AZ31B
Corrosion Resistance of Al-Cu Alloys in Function of the Microstructure
Microstructure, Fracture and Mechanical Properties of ECAPed Aluminum P/M Alloy with Respect to the Porosity
Deformation of AA6016 Aluminum Alloy Sheets at High Temperature and Strain Rate
High Thermal Conductivity Aluminum Powder Metallurgy Materials
Finite Element Simulation of Diffusion and Precipitation with Application to Internal Oxidation of Ni-Xwt%Cr Alloys at 950°C
Alloy Design for Semi Solid Metal Forming
An Investigation into Double Oxide Film Defects in Aluminium Alloys
A Novel Process for Grain Refining and Semisolid Processing
Ultrasonic Degassing of Aluminum Alloys
Morphology of Si Phase in Al-Mg-Si-Cu Alloys with Excess Si Addition
Dynamic Observation of Hydrogen Gas Release during Crack Propagation in Al-Zn-Mg Alloy
Isothermal and Non-Isothermal Annealing of Cold-Rolled Al-Mn-Fe-Si Alloys with Different Microchemistry States
Effect of Heat Treatment Conditions and Small Addition of Cu on Occurrence of Serration in Al-Si Alloys
Separation of Pure Silicon from Al-Si Alloy Melts
The Evolution of Texture and Deformation Anisotropy at an Equal Channel Extruded Aluminum 1050 Alloy
Onset of the Portevin-Le Chatelier Effect: Role of Synchronization of Dislocations
Multiscale Analysis of Acoustic Emission during Plastic Flow of Al and Mg Alloys: From Microseconds to Minutes
Quantitative Investigation on Nano-Scale Precipitates in an Al-7.5Zn-1.7Mg-1.4Cu-0.12Zr Alloy under Various Aging Tempers
Plating on Developed Al-Mg-Zn Alloy Casting and its Glossiness
Statistical and Physical Micro-Feature-Based Segmentation of Cortical Bone Images Using Artificial Intelligence
Influence of SDAS on the High Temperature Tensile Behaviour of the C355 Al Alloy
Microstructural Characteristics of Diecast AlMgSiMn Alloy
Image Processing Characterization of Microstructures of Al-Si Casting Alloy
Microstructure, Properties and Design of Direct Quenched Structural Steels
Hardening of Al-Mg-Si Alloys and Effective Particle Size in Microstructural Models
Effect of Annealing on Structure and Mechanical Behavior of an AA2139 Alloy
The Role of Cr in H Desorption Kinetics in Rapidly Solidified Al
Grain Refinement of Al Cast by Novel Al-Al2.5Cu0.5Ti Refiner Fabricated by Cold Pressing
Recrystallization Microstructure and Texture of Highly Strained Commercial Purity Aluminium Alloy
Reinforcement of Hypereutectic Al-Si Alloys with Fe-Bearing Compounds and Si Particles Assisted with Ultrasonic Treatment
Development of Homogeneity in an Al-6061 Alloy Processed by ECAP and ECAP-Conform
Effect of Contraction Behaviors during Solidification of 7xxx Aluminum Alloys on Hot Tearing Susceptibility
Mechanical Properties of Al-10 Mass % Si-Mg High-Pressure Die-Casting Alloy with Different Mg Content
Influence of Cold Rolling Reduction and Cross Rolling on Recrystallization Texture Formation in Electro Deposited Pure Iron with a Sharp and Homogeneous //ND Fiber
The Numerical and Experimental Study on Electromagnet-Air Knife DC Casting Process of Large-Size AA 7055 Aluminum Alloys
The Numerical and Experimental Study on DC Casting Process of Three-Layer Composite Ingots of 4045/3004/4045 Aluminum Alloys
Effect of Processing Conditions on the Microstructure Development during Constrained Groove Pressing of Aluminium
Chapter 2: Mg Alloys (Prof. Karl U. Kainer Symposium)
Tensile Deformation of Magnesium and Magnesium Alloy Single Crystals
Corrosion Characterization of Magnesium Alloys – The Role of Process Parameters
Parameters Controlling High Temperature Deformability of Wrought Magnesium Alloys
The Effect of Ce Addition on the Creep Resistant Mg-Sr-Mn Alloys
The Orientation Dependence of Strain Hardening and Texture Development in an Extruded Magnesium Alloy
Effect of Thermomechanical Processes on Twin Roll Casted Magnesium Alloy Sheets
Room Temperature Screw Form Rolling of AZ91D Magnesium Alloy through Processing by Extrusion-Torsion Simultaneous Working
Fabrication of Mg Alloy Single Crystals Containing Rare Earth Elements and their Mechanical Behavior
Development of New High-Strength and Heat-Resistant Mg-Zn-Y-X (X=Zr and Ag) Casting Alloys
Microstructure and Defect Structure Evolution in Ultra-Fine Grained MgAlZn Alloy
Effect of Plane Strain on the Microstructure and Texture of AZ31 Sheet with Various Reduction Ratios
Compressive Characteristics of AZ91 Containing Sn Alloy with the Microstructure
Investigation of Properties of CaO Added Wrought Mg-Zn-Y and Mg-Y-Zn Alloys
Degradation of Magnesium Alloys in Artificial Urine Solution for Urological Device Applications
Influence of Nd in Extruded Mg10Gd Base Alloys on Fatigue Strength
Effect of ZrB2 Nanoparticle Addition: Nano-LPSO-Grain Structured Ultra-High Strength Mg-RE Alloy
Low Temperature Warm Forming of Magnesium ZEK 100 Sheets for Automotive Applications
Effect of CaO on Thermal Conductivities of Mg and Mg-Zn Alloys
Manufacturing Technology and Usable Properties of Magnesium Alloy after Plastic Deformation
Hot Forging of Cast Magnesium Alloy TX31 Using Semi-Closed Die and its Finite Element Simulation
On the Bonding Strength of Mg-Mg and Mg-Al Material Compounds
A New Model for Discontinuous and Continuous Precipitation in AZ91 Magnesium Alloy
Age-Hardening Behavior of Mg-Al-Zn Alloys Produced by Sand Mold Casting
Microstructure and Mechanical Property in Cast AZ91 Magnesium Alloy with Y Addition
Method for the Depletion of the Basal Texture in Rolled AZ31 Magnesium Sheets
Microstructure Evolution of Mg-10Gd-2Y-0.5Zn-0.3Zr Alloy during Isothermal Forging Process
High Temperature Creep Behavior and Effects of Stacking Fault Energy in Mg-Y and Mg-Y-Zn Dilute Solid Solution Alloys
Recrystallization of AZ31 Alloy
Microstructural Characteristics and Mechanical Properties of Spray-Deposited Mg-Gd-Y-Zr Alloy
Improved Paint Baking Response of a Novel Al-Mg-Si Alloy Automotive Body Panels by Adding Zn Element and Pre-Ageing Matching
Relaxation of Misfit Dislocations at Nodes
Microstructure Change of AZCa912 Magnesium Alloy Continuous Casting Bar by Hot Compression
Twin Roll Casting (TRC) of Magnesium Alloys – Opportunities and Challenges
Twin Roll Casting and Rolling of New Mg-Wrought Alloys for Body Protective Safety Equipment
Effect of Microstructure on Hot Bulging Deformation for AZ31 Magnesium Alloy Sheet with Resistance Heating
Chapter 3: Ti Alloys/Aerospace Structural Metallic Materials
ATI 425® Alloy Formability: Theory and Application
Recovery and Recrystallization during Thermo-Mechanical Processing of Ti-6.5Al-1.5Zr-3.5Mo-0.3Si Alloy
Modelling of the Ductile Damage Behaviour of a Beta Solidifying Gamma Titanium Aluminide Alloy during Hot-Working
Effect of Al Addition on Phase Constitution and Heat Treatment Behavior in Ti-8.5mass%Mn-1mass%Fe-Al Alloys
Three-Stage Character of Strain Hardening of a-Ti in Tension Conditions
Friction Stir Welding of Ti-6Al-4V Alloy
Effect of Zr Addition on High Temperature Mechanical Properties of Near Alpha Ti-Al-Zr-Sn Based Alloy
Dynamic Globularization of a-Phase in Ti6Al4V Alloy during Hot Compression
Fatigue and Fracture Behavior of Porous TiNi Alloys
Mechanical Properties of Ti-Mn-Al-Fe Alloys after Solution Heat Treatment
Effect of Si and Ge Addition on the Evolution of Microstructure in Near Alpha Titanium Alloy
FEM Study of Superplastic-Like Forming of Ti-6Al-4V Alloy
Beta-Forging of Ti6Al4V Titanium Alloy Powders Consolidated by HIP: Plastic Flow and Strain-Rate Relation
Tensile Strength and Impact Toughness of Gallium-Bearing Near-a Titanium Alloys
Chapter 4: Steels
Effect of Multipass Welding Using a Low Transformation Temperature Filler Metal on Residual Stress and Toughness
18CrNiMo7-6 with TRIP-Effect for Increasing the Damage Tolerance of Gear Components — Part I: Alloy Design
18CrNiMo7-6 with TRIP-Effect for Increasing the Damage Tolerance of Gear Components — Part II: Microstructure and Mechanical Properties
Finite Element Implementation of a Bonding Model and Application to Roll Bonding of Aluminum Sheets of Largely Different Yield Strength
Development of Ultrafine Grained Austenitic Stainless Steels by Large Strain Deformation and Annealing
Microstructural and Mechanical Properties of the Intercritically Reheated Coarse Grained Heat Affected Zone (ICCGHAZ) of an API 5L X80 Pipeline Steel
Hybrid Fiber Laser – Arc Welding of High Strength Low Alloy Steel
Austenite Grain Structures in Ti and Nb-Containing HSLA Steel during Slab Reheating
Development of Ultra-Fine Grained Dual-Phase Steels: Mechanism of Grain Refinement during Inter-Critical Deformation
Microstructure Evolution of Martensitic Ti-6Al-4V Alloy during Warm Deformation
Thermo-Mechanically Controlled Processed Ultrahigh Strength Steels
Heat Treatment Effects on Distortion, Residual Stress, and Retained Austenite in Carburized 4320 Steel
A Novel Concept of High Cu, Low Mn, Environmentally-Friendly Weathering Steels
The Mechanism of Martensite-Austenite Microconstituents Formation during Thermomechanical Controlling Processing in Low Carbon Bainitic Steel
Fatigue Behavior of High Manganese TWIP Steels and of Low Alloy Q&P Steels for Car-Body Applications
Cold Rolled Superfine Steel
Influence of Heat Treatment on Values of a Strain of Interstitial Free Steel
Self-Consistent Modelling of TWIP Steel during Uniaxial Tensile Loading
Two-Step Quenching & Partitioning of 42SiCrB Steel
Investigation of Possible Mechanisms for Developing Long Steel Products with Ultrafine Grained Microstructure
Study of Dislocation Substructures in High-Mn Steels by Electron Channeling Contrast Imaging
Revealing the Strain-Hardening Mechanisms of Advanced High-Mn Steels by Multi-Scale Microstructure Characterization
The Mechanical and Deformation Behavior of TWIP Steel Prepared by Directional Solidification
Thermodynamic and Kinetic Calculation of Non-Equilibrium Microstructure Design of TRIP Steel
Effect of Heating Rate and Silicon Content on Kinetics of Austenite Formation during Continuous Heating
Microstructural Features Intervening in Hot Workability of Free Cutting Steels
Microstructure-Mechanical Properties Relationships for Complex Microstructures in High Strength Steels
Assessing Dislocation Densities in the Gamma Prime Phase of a Superalloy from High Resolution Diffraction Peak Shape
Surface Roughness and Friction in Hot Rolling of Stainless Steels
Semi-Solid Processing of Powder Steels in Cryogenically-Cooled Die
The Effect of Niobium Carbides and Laves Phase on the Yielding Behaviour of a Stabilized Ferritic Stainless Steel
TiO2 Nanoparticle Addition into Molten Steel: From Lab Scale to Industrial Scale
Bendability and Microstructure of Direct Quenched Optim® 960QC
Study on the Soaking Condition of High Carbon Chromium Bearing Steels
Microstructure Evolution in a 304-Type Austenitic Stainless Steel during Multidirectional Forging at Ambient Temperature
Mechanical and Corrosion Properties of a F138 Austenitic Stainless Steel after Deformation by Equal Channel Angular Pressing
From Micro to Nano Scale Structure by Plastic Deformations
Kinetics of Sigma Phase Precipitation in Niobium-Stabilized Austenitic Stainless Steel and Effect on the Mechanical Properties
Optimization of Mechanical Properties of High Strength TRIP Steels
Microstructure and Mechanical Properties of Extra High Strength Heavy Steel Plate for Bridge Application
The Development and Application of High-Performance Ultra-High Strength Stainless Steel Subject to Marine Environment
Effect of Martensite Fraction on Void Nucleation Behavior and Ductility in DP Steels
Dilatometer Analysis of the One Step Quenching and Partitioning Process in a 1.5%Si Steel
Temperature and Stress State Influence on Mechanical Properties and Damage Evolution of Dual-Phase Steels
Nucleation Rate and Number of Precipitates in V and Nb-Microalloyed Steels
Microstructures and Mechanical Properties of Stainless Steel AISI 316L Processed by Selective Laser Melting
Effects of Temperature and Strain Rate on Stress-Strain Relationship and Deformation Twinning in Fe-5%Si Alloy
Three-Dimensional Approach to Observing Growth of Blocks and Packets in Fe-18Ni Maraging Steel
Fretting Fatigue Behaviour of 12-Cr Steels and Strength Prediction
Effects of ALPS on Mechanical Property in Bainitic Steels
Effect of Cold Rolling and Isothermal Holding before Austenitization on Mechanical Properties in Steels
Development of Hot Rolling Schedules for Lean Alloyed Pipeline Steel X80 Produced on Continuous Mill 2000
Low-Cycle Fatigue Behavior and Microstructural Evolution of the Fe–30Mn–4Si–2Al Alloy
Assessment of Hydrogen Uptake and Permeation in AHSSs
Development of Hollow Iron Ore Agglomerate and its Characterization
Role of Microstructure in Susceptibility to Hydrogen Embrittlement of X70 Microalloyed Steel
Effects of Thermomechanical Processing on Uniformity of Microstructure and Properties of AHSS
EBSD Study of the Microstructural Evolution during Hot Compression Testing of a Superduplex Steel
Complex Microstructural Banding of Continuously Cooled Carbide-Free Bainitic Steels
Physical Metallurgy Related to the Thermomechanical Process of Hot Rolling of Nb Microalloyed Steel Beams: Prediction of Mechanical Properties
Effects of Coarsening of Cementite in Pearlite before Austenitization on Formation of BWING and Mechanical Property in a Steel
Cold Rolled Superfine Steel
Mechanical and Corrosion Properties of Welded Joints in New Generation Ferritic and Duplex Stainless Steels
Innovation and Processing of Novel Tough Ductile Ultra-High Strength Steels through TMR-DQP Processing Route
The Effects of Cooling Rate on Retained Austenite Characteristics of a 0.2C-1.5Si-1.5Mn-1.0Cr-0.05Nb TRIP-Aided Martensitic Steel
Static Grain Growth in an Austenitic Stainless Steel Subjected to Intense Plastic Straining
Effect of Austenite Grain Size on the Mechanical Properties in Air-Cooled 0.1C-5Mn Martensitic Steel
Impact Toughness of 0.3 Mass% Carbon Tempered Martensitic Steels Evaluated by Instrumented Charpy Test
Inter-Relationship among Skin Pass Reduction, 3D and 2D Roughness Parameters and the Stampability/Paintability of Cold Rolled Steel Sheets for the Automotive Industry: A Preliminary Analysis
Research and Development of a Yield Strength 400 MPa Class Structural Steel Plate with Enhanced Weldability
Effects of Mn, Si and Cr Addition on the Spheroidization of Cementite in Hypereutectoid Fe-1mass%C Steel
Chapter 5: TMP Microalloyed Steels (Prof. A.J. DeArdo Symposium)
Investigation of Possible Mechanisms for Developing Long Steel Products with Ultrafine Grained Microstructure
Modification of Banding in Dual-Phase Steels via Thermal Processing
Nucleation Rate and Number of Precipitates in V and Nb-Microalloyed Steels
Experimental Study on the Formation of Non-Metallic Inclusions Acting as Nuclei for Acicular Ferrite in HSLA Steels through Specific Deoxidation Practice and Defined Cooling Conditions
Chapter 6: High & Ultra High Temperature Materials
Creep Deformation of 10 mol% La2O3 + YSZ Ceramic Composite Prepared by Spark Plasma Sintering
Degradation of Spark Plasma Sintered (0, 5, 10 and 15 mol%) CeO2 + YSZ Composites in Supercritical Water
Nickel-Chromium Alloys: Engineered Microstructure via Spark Plasma Sintering
Investigation of Plastic Instability in TWIP Steels by In Situ Diffraction of High Energy X-Rays
Slip System Analysis in the Cold Rolling of a Ni3Al Single Crystal
Effective Fluorine Treatment for Improved High Temperature Oxidation Behavior of Novel Cu, Mo and Si Containing TiAl-Alloys
Microstructure and Mechanical Properties of NbSi2/MoSi2 Crystals with Lamellar Structure
High Temperature Compression Properties of Ni3(Si,Ti) Based Intermetallic Compounds
Role of Ti/Al Ratio of Ti-Al-X (X=Cr, Nb, Ta and W) Intermetallics on High Temperature Tensile Properties
Evaluation of Tool Performance of Recycle-Type Fe3Al Based Alloy for Pure Cu
Effects of Geometric Constraint on Solidification Microstructural Development of Peritectic TiAl Alloys
High Temperature Tensile Behavior of Directionally Solidified MAR-M247 Superalloy
Feasibility of Cast and Wrought Co-Al-W-X Gamma-Prime Superalloys
Metals for High Temperature Applications under Extreme Conditions – Development and Testing
Phase Equilibrium between B2 Aluminide NiAl and Nb-Mo bcc Solid Solution Phase
Spark Plasma Heat Treated ZrB2-SiC and HfB2-SiC Composites
Mechanical Behaviors of Alloy 617 with Varied Strain Rates at High Temperatures
Damage and Fracture Mechanism of a Nickel-Based Single Crystal Superalloy during Creep at Moderate Temperature
Effects of Alloying Elements on Physical and Mechanical Properties of Co-Al-W-Based L12/fcc Two-Phase Alloys
A Material Genomic Design of Advanced High Performance, Non-Corroding Steels for Ambient and High Temperature Applications
Microstructure and Mechanical Behaviour of NbTiAl Based Alloys Doped with Low Additions of Silicon
Chapter 7: Bio Materials
Mechanical Performance and Biocompatibility of Biomedical Beta-Type Titanium Alloy Subjected to Micro-Shot Peening
Fatigue Behavior of 51 Vol.% Porous Ti-6Al-4V Alloy
Layer-by-Layer Thin Films of Alginate/Chitosan and Hyaluronic Acid/Chitosan with Tunable Thickness and Surface Roughness
Mechanical and Biological Biocompatibilityof Novel ß-Type Ti-Mn Alloys for Biomedical Applications
Anti-Adhesive Finishing of Temporary Implant Surfaces by a Plasma-Fluorocarbon-Polymer
Characterization of the Superelasticity and the Martensitic Transformation from Ti-Nb-(O,N) Biomedical Alloys
3D Printing of Meso-Decorated Gels and Foods
The Influence of Heat Treatment on the Structure and Microstructure of Ti-15Mo-xNb System Alloys for Biomedical Applications
Biomedical Polymer Surface Modification of Beta-Type Titanium Alloy for Implants through Anodic Oxide Nanostructures
Analysis of Osteocyte Morphology in Terms of Sensation of In Vivo Stress Applied on Bone
Challenges and Opportunities in Electrochemically Coating Calcium Phosphate on Magnesium Alloys for Biodegradable Implant Applications
Effect of Hydrolysis on Mechanical Behavior of Bioabsorbable Composites
Effect of Fe Addition on the Microstructure Formation and Mechanical Properties of Ti-2.0, 3.0at%Mo Alloys
Additive Manufacturing for Medical and Biomedical Applications: Advances and Challenges
Osteoblast Ingrowth into Titanium Scaffolds Made by Electron Beam Melting
Osteoconductivity of Hydrothermal-Treated Valve Metals
Oriented Collagen Scaffolds for Anisotropic Bone Tissue Construction In Vitro
Optimization of Mo Content in Beta-Type Ti-Mo Alloys for Obtaining Larger Changeable Young’s Modulus during Deformation for Use in Spinal Fixation Applications
Relationship between Heterogeneous Microstructure and Fatigue Strength of Ti-Nb-Ta-Zr Alloy for Biomedical Materials Subjected to Aging Treatments
Geometrical Micropillars Combined with Chemical Surface Modifications – Independency of Actin Filament Spatial Distribution in Primary Osteoblasts
Fabrication of Antibacterial Titanium Implant Using Anodic Oxidation Technique
Osteoconductivity of Superhydrophilic Anodized TiO2 Films Using Hydrothermal Treatment
Plasma-Activated Electrospun Polylactide Fiber Meshes as Matrices for Tissue Engineering
Bioengineering Application in Kinesitherapy of Children with Lower Limbs Dysfunction
Microstructure of Co-Cr Alloy Products with Three-Dimensional Geometry Fabricated by Laser Beam Sintering
Carbides and their Role in Advanced Mechanical Properties of L605 Alloy: Implications for Medical Devices
Deformation Microstructure and Mechanisms in a Metastable ß Titanium Alloy Exhibiting TWIP and TRIP Effects
Octacalcium Phosphate: A Potential Scaffold Material for Controlling Activity of Bone-Related Cells In Vitro
Effect of Phase Stability on Some Physical and Mechanical Properties in ß-Ti Single Crystal for Biomedical Applications
Biocompatibility of Titanium Dioxide Film Modified by Femtosecond Laser Irradiation
Chemical-Hydrothermal Synthesis of Zr-Containing Titanium Oxide Film on CP-Ti
Substrate Independent Approach for Immobilisation of Quaternary Ammonium Compounds to Surfaces to Reduce Bio-Burden
Plasma Modification of DLC Films and the Resulting Surface Biocompatibility
Chapter 8: Advanced Protective Coatings/Surface Engineering
Comparison of Various Electroless Nickel Coatings on Steel: Structure, Hardness and Abrasion Resistance
Formation of Fe-Al Intermetallic Compound Film on High-Speed Tool Steel by Shot Lining and Heat Treatment
Influence of SiO2 Nanoparticle Codeposition on Homogeneity of Zinc-Nickel Alloy Plating from an Acid Sulphate Bath
Mechanical and Structural Properties of Superhard TiAlSiN Coatings Deposited by Arc Ion Plating of Cylindrical Cathode
Silica-Containing Hybrid Nanocomposite "Melting Gels"
Role of Sn on the Adhesion between Cu-Sn Alloy Coated Steel and SBR Based Rubber
Electronic Properties of Cubic Boron Nitride with Impurity Atoms and Vacancy
Effect of Dopant Configuration on Oxygen Shielding Properties of Polycrystalline Alumina
Effect of Se Content in High-Cyanide Silver Plating Solution on {200} Crystal Plane Orientation Ratio of Electrodeposited Silver Layer
Friction and Wear Properties of the Siliconized, Chromized and Borochromized Steel Substrates
Fabrication of Nanoporous Crystalline Alumina Membrane by Anodization of Aluminum
Interfacial Reactions during Explosive Bonding
Deposition of Self-Assembled Monolayer on Vanadate Conversion Coated AZ31 Mg Alloy
Development of Microtextured Photocatalytic Surface by Vibration-Assisted Scratching
Chapter 9: Composites (MMC, CMC)/Nanocomposites/Synthetic & Foams)
Sandwich Lightweight Design in Automotive Usage
Structure of Nanocomposites Based on Carbon Nanotubes Decorated with Platinum Nanoparticles
Effect of Surface Modification on the Sound Absorption Behavior of Open Celled Aluminum Foams
Particle Pushing during Solidification of Metals and Alloys
Influence of Laser Process on Mechanical Behavior during Cutting of Carbon Fiber Reinforced Plastic Composites
Aluminum Di-Borides for Engineered Surfaces for Low Friction Applications
Dry Sliding Wear Behaviour of Magnesium Alloy Based Hybrid Composites in Transverse Direction
Role of Sn on the Adhesion between Cu-Sn Alloy Coated Steel and SBR Based Rubber
Synthesis of Physically Functionalized Carbon Nanotube Reinforced Al-Si Nanocomposite by Spark Plasma Sintering
Influence of Oxide Additions in Cu-Co-Fe Composite Powders Obtained by Mechanical Alloying
Effect of Yarn Structure on Mechanical Properties of Twisted Yarn Composites
Processing-Property Relationships in Advanced Multi-Functional Composite Materials: Management of Dielectric Behavior
Cast Al-Based Nanocomposites Reinforced with Thermal Plasma-Synthesized Ceramic Nanoparticles
Effect of Dispersibility of TiB2 Particles on Electrical Conductivity in TiB2/Al Composites
Fabrication of Self-Lubricating Cu-Based Composite Containing Graphite Particle by Centrifugal Mixed-Powder Casting
Positron Lifetime Studies of Irradiated Ultra-High Molecular Weight Polyethylene and Composites Made of Martian Regolith
TEM and XRD Study of Nanostructured Composite Materials Reinforced with the Halloysite Particles
Fatigue and Fracture Behavior of MMC in the HCF- and VHCF-Regime
Thermal Properties of Porous Copper Manufactured by Lost Carbonate Sintering
Measuring Threshold Pressure of Melt Magnesium Infiltrating into Al2O3sf Porous Preform with Fast Method
Chapter 10: Interfaces & Grain Boundaries
Atomic Resolution Microscopy of Nitrides in Steel
Interfacial Magnetoelectric Switching in Multiferroic Heterostructures
Plasticity and Fracture of InP/Si Substructures
Effect of Grain Boundary Energy Anisotropy on Faceting and Migration of Low Angle Grain Boundaries
Ti and Zr Transition Metals Effect in the D03 Fe3Al by Ab Initio Study Approach
Phases Stability of Ni-Mn-Ga Alloys Studied by Ab Initio Calculations
Properties of GaN-Related Epitaxial Thin Films Grown on Sapphire Substrates as Transparent Conducting Electrodes
On the Role of the Crystallographic Grain Characteristics in the Corrosion Behavior of Polycrystalline Copper
Chapter 11: Fuel Cells, Hydrogen Storage Technologies, Batteries, Supercapacitors & Thermoelectric Materials
Research Progress of a New Solid Oxide Metal-Air Redox Battery for Advanced Energy Storage
Surface Modifications of TiO2 by Ion Implantation
Reversible Solid State Fe-Air Rechargeable Battery Using LaGaO3 Based Oxide Ion Conducting Electrolyte
High-Pressure Synthesis of Novel Hydrides and Intermetallic Compound in Al-X Systems (X=Sr, V, Hf)
Nafion – Azole Composite Membranes for High Temperature PEMFC
Performance of an Anode-Supported Honeycomb Solid Oxide Fuel Cell
Mechanical Analysis to Improve Reliability and Durability of Solid Oxide Fuel Cells
Enhanced Performance of Ag-Doped Oxygen Electrode Based Solid Oxide Electrolyser Cell under High Temperature Electrolysis of Steam
Effect of Gaseous Impurities on Degradation of SOFC Materials
Chapter 12: Friction Stir Processing/Welding
Fabrication of Al6061-AMC by Adding Copper-Coated SiC Reinforcement by Friction Stir Processing (FSP)
Friction Stir Welding of Al Alloys: Analysis through a Multi-Objective Optimization Tool
Effect of Friction Stir Processing on Microstructure and Mechanical Properties of a HPDC Magnesium Alloy
Influence of Galvanized Coatings on Abrasion Circle Friction Stir Spot Welding Aluminium to Steel for Automotive Applications
Challenges in Joining Aluminium with Copper for Applications in Electro Mobility
Friction Stir Welding of Carbon Steel for Application in Used Fuel Containers
Friction Stir Welding of Line-Pipe Steels
Numerical Simulation Model for FSW Employing Particle Method – Effect of Tool Angle on Fluid Motion
Assessment of the Advantages of Static Shoulder FSW for Joining Aluminium Aerospace Alloys
Evaluation of FSW on High Yield Strength Steels for Shipbuilding
Effect of Relative Motion between Weld Tool and Work Piece on Microstructure of Ultrasonically Welded Joint
The Influence of Gaps and Misalignment on Friction Stir Welded Butt Joints of Medium-Sized Parts
Numerical Analysis of Multi-Field Coupled Phenomena in Friction Stir Welding and Applications
Friction Stir Welding for a Nuclear Fusion Reactor
Realization of Al/Mg-Hybrid-Joints by Ultrasound Supported Friction Stir Welding
FSW Process Tolerance According to the Position and Orientation of the Tool: Requirement for the Means of Production Design
Chapter 13: Materials under Extreme Conditions
Behavior of Decomposed Ammonia Borane at High Pressure up to ~10 GPa
High Pressure Materials Physics Research at UNLV
Effect of Long-Term Creep on Microstructure of a 9% Cr Heat Resistant Steel
Fatigue Designing of High Strength Steels Components Considering Aggressive Fuel Environment and Very High Cycle Fatigue Effects
Advanced Degradable Alloys for Multi-Stage Fracturing Applications
Comparative Performance of Three High-Strength Ni-Cr-Mo Alloys in Oilfield Simulated H2S Environment
Production of SiC Materials by Reactive Infiltration
Advanced Microstructures for Increased Creep Rupture Strength of MARBN Steels
Simulation of Radiation-Induced Segregation by the Hybrid Potts-Phase Field Model
Experimental Studies on Melting Behavior of Silicon Powders by In-Flight Plasma Melting Technique
Chapter 14: Metallic Glasses/Bulk Metallic Amorphous Materials
Analysis of Cooperativity in Metallic Glass Forming Liquids
Effect of B2O3 Fluxing on Glass-Forming Ability and Soft Magnetic Properties of Fe(-Co)-B-Si-Nb Bulk Metallic Glasses
A Gold-Based Bulk-Solidifying Amorphous Alloy for Jewelry — Comparison with a Palladium-Based Amorphous Alloy
Anomalous X-Ray Scattering Investigations on Metallic Glasses
Properties of Indium Tin Oxide/Amorphous Alloys Bi-Layer Films as Transparent Electrodes
Warm Rolling Technique for Amorphous Alloy Strip Produced by Ultrarapid Cooling-Thermal Spraying Based on Hydraulic-Stress-Induced Structural Relaxation
Monolithic Nanoporous Copper with Novel Electrochemical Properties Fabricated by Dealloying Cu-Zr(-Al) Metallic Glasses
Mg-Based Bulk Amorphous Alloy Composites Fabricated by Spark Plasma Sintering
Tuning of Soft Magnetic Properties in FeCo- and FeNi-Based Amorphous and Nanocrystalline Alloys by Thermal Processing in External Magnetic Field
Production of Zr-Based Metallic Glass Matrix Composites by Semisolid Process
Shape Memory Behavior of Zr-Cu-Al Bulk Metallic Glass Matrix Composite
Application of Recrystallization Texture Evolution Model to Predict Plastic Formability in Steel Strips
Cu Particulates Dispersed Bulk Metallic Glass Composites with High Strength and High Electrical Conductivity Fabricated by Spark Plasma Sintering
Correlation between the Enhanced Plasticity of Glassy Matrix Composites and the Volume Fraction, Size and Intrinsic Mechanical Property of Reinforcements
Chapter 15: Nanomaterials for Structural & Energy Applications
Preparation of ATO Thin Films from SPS-Derived Large Size ATO Ceramic Targets by PVD Methods
On the Comprehension of Mechanical, Thermal and Chemical Evolution of Exhaust Gases after Treatment Catalysts
The Refinement of the Nanoporous Copper by Adding Third Elements
Bottom-Up Formation of Vertical Free-Standing Semiconductor Nanowires Hybridized with Ferromagnetic Nanoclusters
Structure Controlled Nanoparticle Conjugates Synthesized by Gas-Liquid Interfacial Plasmas
Plasma Synthesis of Silicon Nanocrystals: Application to Organic/Inorganic Photovoltaics through Solution Processing
Synthesis of Nanoporous Materials and their Functionalization for Environmental Applications
Gas-Liquid In Situ Production of Ceramic Reinforced Aluminum Matrix Nanocomposites
Local Strain Distribution in AlN Thick Films Analyzed by X-Ray Microdiffraction
Nanostructure Control of Si and Ge Quantum Dots Based Solar Cells Using Plasma Processes
III-V/Ge Device Engineering for CMOS Photonics
Formation of Self-Organized Pore Arrays on Metallic Substrates by Anodization and their Applications
Catalytic Properties of Ni-Al Intermetallic Nanoparticles Fabricated by Thermal Plasma Process
Development of Nanoalloy Catalysts for Realization of Carbon-Neutral Energy Cycles
Enhanced Wettability of Cubic Boron Nitride Films by Plasma Treatment
Chapter 16: Neutron Scattering & X-Ray Studies of Advanced Materials
Study of Micromechanical Behaviour of Two Phase Polycrystalline Materials Using Diffraction and Self Consistent Model
Role of the Tilting of Oxygen Octahedra in the Stabilization of the Orbital-Modulated State in the Layered Perovskite Manganite Ca2-xNdxMnO4
Utilization of an Event-Recording System for Neutron Diffraction Experiments
High Resolution Diffraction of a Superalloy during HT Processing and Mechanical Testing: Experiments and Modeling
Recent R&D on Superconducting Wires for High-Field Magnet
Stress Measurements in Polished Al-Mg Alloy and CrN Coating Using Multireflection Grazing Incidence Method
The Use of In Situ Characterization Techniques for the Development of Intermetallic Titanium Aluminides
New Generation X-Ray Stress Measurement Using Debye Ring Image Data by Two-Dimensional Detection
Radiographic and Tomographic Neutron Bragg Imaging for Quantitative Visualization of Wide Area Crystalline Structural Information
Analysis of Retained Austenite and Residual Stress Distribution in Ni-Cr Type High Strength Steel Weld by Neutron Diffraction
Chapter 17: Modelling & Simulation
On the Stress Development in SA508 Autogenous Weld
Local Brittle Zones and the Role of Niobium
Comparative Analysis by the Newton Method of New Constitutive Strain Dependent Creep Equations Based on the Garofalo Equation
Integrated Database Development for Casting Design and its Application to Casting Simulation
Grain Competitive Growth Prediction during Solidification in Single Crystal Superalloy DD6 Castings
Predicting the Microstructural Evolution of an Austenitic Stainless Steel by Hybrid Modeling
Thermo-Mechanically Coupled Modeling of Cooling Temperature History Effects on Precipitation Hardening in Hot Strip Coiled Products
Towards a 3-Dimensional Phase-Field Model of Non-Isothermal Alloy Solidification
Density Functional Theory Study of H2O Molecules on Cr2O3 Surfaces
Microstructure Computation for Phase Transition in Steels
Martensite Spread: Analytical Modeling and Computer Simulation
Discovery of New Materials and Heat Treatments: Accelerated Metallurgy and the Case of Ferrous and Magnesium Alloys
Simulation of Inhomogeneous Materials Evolution in Hot Rolling Using a Layer Model
Modeling of Hydrogen Diffusion in Piled Slabs
Use of Electronic Stress Tensor Density and Energy Density in Chemistry
Limitations of ICME and ICMS due to Variability – Alternative Strategies for Alloy Design
Microstructure Evolution and Precipitation Modeling in Ni-Based Alloy C-263
Hybrid Modelling Approach for Investigating the Thermal Contact during Solid State Joining
Solidification of Immiscible Alloys and Convective Effect
Chapter 18: Materials Performance
Comparison of Material Flow Stress Models toward More Realistic Simulations of Friction Stir Processes of Mg AZ31B
Performance of Modern DCI Materials – Investigation of Microstructural, Temperature and Loading Rate Effects on Mechanical and Fracture Mechanical Properties
Electrochemical Study of Diffusion Bonded Joints between Micro-Duplex Stainless Steel and Ti6Al4V Alloy
Improving the Working Life of Steel Grinding Balls by Optimizing their Hardness and Tenacity
On Fatigue Crack Initiation in the Matrix in Very High Cycle Fatigue Regime
New Algorithm to Determine the Yield Stress from FIMEC Test
Energy Dissipation and Self-Heating due to Microplastic Deformation Mechanisms at Very High Cycle Fatigue for Single-Phase Ductile Metals
Additive Manufacturing Viewed from Material Science: State of the Art & Fundamentals
Impact of Metallurgical Size Effects on Plasticity of Thin Metallic Materials
Computation of Wave Propagation in Damped Specimen for Damage Detection
Analysis of Environmental Performance of Green Geosynthetics Based on Degradability
Fatigue, Fatigue Crack Propagation and Mechanical Fracture Behaviour of Laser Beam-Welded AZ31 Magnesium Sheets
Application of Indirect Laser Peening to SUS304 Stainless Steel
Plastic Rotational Factor Calculation for Shallow-Notched SE(B) Specimens
Contribution of the Nanoindentation to the Study of HCP Metals
Particle Dispersion Simulator for Gel Printer
Microstructural Barriers against Fatigue Crack Growth
Additive Manufacturing Viewed from Material Science: State of the Art & Fundamentals
Effects of Heat Treatments on Tungsten for Armours in NFR
Evaluation of Fatigue Damage b
