Öchsner / Murch / Delgado | Diffusion in Solids and Liquids VI | Buch | 978-3-03785-117-3 | sack.de

Buch, Englisch, 1300 Seiten, 2-vol. set, Format (B × H): 170 mm x 240 mm, Gewicht: 2400 g

Öchsner / Murch / Delgado

Diffusion in Solids and Liquids VI

Buch, Englisch, 1300 Seiten, 2-vol. set, Format (B × H): 170 mm x 240 mm, Gewicht: 2400 g

ISBN: 978-3-03785-117-3
Verlag: Trans Tech Publications


The goal of this special collection of peer-reviewed papers was to provide an unique opportunity to exchange information, to present the latest results and to review relevant issues in contemporary diffusion research. The result is a work which will provide valuable insights into this subject.Volume is indexed by Thomson Reuters CPCI-S (WoS)
Öchsner / Murch / Delgado Diffusion in Solids and Liquids VI jetzt bestellen!

Weitere Infos & Material


Preface and Organizing Committees
Effect of Catalyst Diffusion Coefficient on Ethylbenzene Dehydrogenation
Investigation of the Effect of Diffusion Process in the Catalyst Pellet on Overall Reaction Rate of Dehydrogenation of Diethylbenzne to Divinylbenzne
Diffusion Layers with Ti and Ti+Al Formed on 316L Austenitic Steel by a Pack Cementation Procedure
Influence of Important Nanoemulsions pH on Performance of Nanostructures Catalysts for H2 Production in Syngas Reactions
Cosmic Censorship!: Thermal Transport in a ‘Naked’ Black Hole
Assessment of Thermal Non-Equilibrium Condition on Heat Transfer through a Channel Lined with Porous Media – Constant Wall Temperature
Computational Algorithms for Topological Cycle Indices of Tert-Butyl Alcohol by Computational Science
Comparison of the Breakthrough Curves Obtained by ASTM D2007-03 Annex 1 and on a Bench Unit for the Selection of Adsorbents for the Removal of Nitrogen and Sulfur Contaminants from Fuels
Application of Thermo-Mechanical Process to Achieve Nanostructure in 301 Austenitic Stainless Steels
Phase Transformations on ASTM a 744 Gr. CN3MN Superaustenitic Stainless Steel after Heat Treatment
Calculation of the Diffusion Coefficient of Uranium in Compacted Clay: Effect of the Temperature
Surface Characterization of a Nitrided Low Alloy Steel
Formation of Zirconia and Titania Nanotubes in Fluorine Contained Glycerol Electrochemical Bath
Grain Boundary Parameters in Sandstone and Limestone
Electrochemical Mass Transfer Measurements of CO2 in MDEA Solutions
Simulation of VOCs Recovery Process by Absorption
The Effect of Stabiliser’s Molarity to the Growth of ZnO Nanorods
Aligned Growth of Zinc Oxide Nanorods on Catalyst-Seeded Si Substrate by Aqueous-Solution Immersion Method
Microstructure-Toughness Relationship in AISI4340 Steel
Studies of Ionic Conductivity and Dielectric Behavior in Polyacrylonitrile Based Solid Polymer Electrolytes
Hydrodynamic Simulation of Drift Mobility in N-Hg0.8Cd0.2Te
Composition Dependent Diffusivities in Multi-Component Systems

In Situ Simulation by RHEED and Photoemission of GaAs (001) ß2(2x4) Reconstructed Surface
Determination of PBP by Using a Nano SiO2/GC Modified Electrode
Molecular Dynamics Simulation of Solidification of Ag-x%Au Nanoalloy
Diffusion of Hydrogen in Amorphous Ni-Zr Alloys
Effect of the Latent Heat on Wax Deposit in Pipelines
Polyol-Mediated Synthesis of TiO2 Nanoparticles
Study of Semisolid and ECAP Processes on Al-Fe-Si Alloy - Microstructure and Kinetic Grain Growth
Phase and Amplitude Control of Optical Properties of Quantum Dot Molecules
Heat Transfer in Nanocomposites with Monte-Carlo Simulations
The Influence of Rubber Blend Aging and Sample Homogeneity on Heat Transport Phenomena
Experimental and Theoretical Research of the Shell Side Heat Transfer Coefficient and Pressure Drop in a Plastic Shell and Tube Heat Exchanger
Raman Spectroscopy: Mutual Diffusion Coefficient in Hydrogels
Characterization of Nickel Based Alloys (Hard Facing Alloys) with Additions of Ti and Mo
Effectiveness Parameters for the Heat and Mass Transfer in a Desiccant Wheel
Thin Scandium Layer on Solid Aluminium: Thermodynamic Investigation
Dynamic Thermal Diffusivity Measurements – A Tool for Studying Gas-Solid Reactions
Phase Transformation and Thermoelectric Properties of Sn-Filled/Fe-Doped CoSb3 Skutterudites
A Study on the Coupled Thermal and Damage Effects in Deforming Solids
Pulse Electrolysis for the Production of Hard Ni/ZrO2 Composite Coatings
Finite Element Modeling of Silicon Transport into Germanium Using a Simplified Crystal Growth Technique
Effects of Mechanical Activation during the Synthesis of Tungsten Carbide Powders by Carbothermic Reduction of Tungsten Oxide
Numerical Analysis of Solute Segregation in Directional Solidification under Static Magnetic Field
Effect of Quincke Rotation and Taylor Circulation on Mass Transfer from a Fluid Drop in a Constant Electric Field
Quantitative Evaluation of the Raman Spectra of Carbon Layers
Grain Structure Evolution of Mg Alloy AM60 Influenced by Ca Addition
Solidification of Discontinuous Al2O3 Fiber Reinforced Magnesium (AM60) Matrix Composite
The Influence of Acetic Acid on High Temperature Corrosion of Selected Steels Utilized in Automobile Industry
Effect of Multifilamentary Nb/Cu-Sn Wire Diameter on the Nb3Sn Diffusion Layers Structure
Origin of “Inverse Isotope Effect” of Hydrogen Diffusion in Palladium
Physical Properties of Diffusive-Hardening Alloys of Copper with Gallium and Tin
The Effect of the Microstructure on Oxidation of Sulfide-Metal Alloys of Copper and Nickel
Synthesis of W- Cu- Ag Nanopowders Produced by a Co-Precipitation Process
Production of Cu/SiC Nanocomposite Layers by Friction Stir Processing
Comparison of Corrosion Performance of Zn and Zn/Al 85/15 Coatings Produced by TWEA
Thermo-Mechanical Behaviour of Ultrahigh Molecular Weight Polyethylene-Carbon Nanotubes Composites under Different Cooling Techniques
Carbon Fiber-Reinforced Composites in Automotive Engine
The Effect of the Pyrolysis Furnace Type on the Yield of Silicon Carbide Whiskers Produced from Rice Husks
Experimental Study of Enhanced Pool Boiling Heat Transfer Using Graphite Foam Inserts
Acoustical Parameters: Aqueous Solution of Borassus Flabellifier Fruit Pulp by Non Destructive Method
Estimation of Effective Moisture Diffusivity in Starchy Materials Following Hydrothermal Treatments
Synthesis of Cobalt Nano Particles on Silica Support Using the Strong Electrostatic Adsorption (SEA) Method
Corrosion Behavior of Laser Nitrided Ti-6Al-4V Alloy: A Review
Mathematical Modeling of Heat Transfer in Laser Surface Hardening of AISI 1050 Steel
Reactive Diffusion at the Cylindrical Dissolving of Copper in the Solder Melt
Electron Diffusion in ZnO Nanomaterial: An Ac Impedance Investigation
Microstructural Changes of FSX-414 Superalloy during TLP Bonding
Macrosegregation and Porosity during Directional Solidification of a Ternary Al-9wt%Si-3wt%Cu Alloy
Diffusion Paths in the Ternarysystem Fe-Co-Ni: An Empirical Approach
Self-Diffusion Coefficient of Molecular Fluid in Porous Media
Sonochemical Synthesis and Characterization of Hydroxyapatite Nanoparticles
Numerical Comparison of Two and Three Dimensional Flow Regimes in Porous Media
Free Convection in a Nanofluid Filled Square Cavity with an Horizontal Heated Plate
Microstructure Characterization of TBC Layers of Gd2Zr2O7 Type
Thermal Diffusivity of TBC Layers of RE2Zr2O7 Type
High Temperature SO2-Gas Corrosion of Ni-Cr-Co Base Superalloy between 800 and 1000°C
Modeling of Transient Moisture Diffusion in Wood below the Fiber Saturation Point
Fabrication of Multi-Walled Carbon Nanotube/Vinyl Ester Nanocomposites: Dispersion and Stabilization
Diffusion in Co-Ni System Studied by Multifoil Technique
Microstructure and Hydrogenation Property of Hyper-Eutectic Mg-Ni Alloys
Numerical Investigation of Impingement Heat Transfer Enhancement on a Flat Plate with an Attached Porous Medium
Oxidation Behaviour of WE54 and Elektron 21 Magnesium Alloys
The Influence of Heat Treatment Parameters on the Thermal Diffusivity of WE54 and Elektron 21 Magnesium Allo


Ihre Fragen, Wünsche oder Anmerkungen
Vorname*
Nachname*
Ihre E-Mail-Adresse*
Kundennr.
Ihre Nachricht*
Lediglich mit * gekennzeichnete Felder sind Pflichtfelder.
Wenn Sie die im Kontaktformular eingegebenen Daten durch Klick auf den nachfolgenden Button übersenden, erklären Sie sich damit einverstanden, dass wir Ihr Angaben für die Beantwortung Ihrer Anfrage verwenden. Selbstverständlich werden Ihre Daten vertraulich behandelt und nicht an Dritte weitergegeben. Sie können der Verwendung Ihrer Daten jederzeit widersprechen. Das Datenhandling bei Sack Fachmedien erklären wir Ihnen in unserer Datenschutzerklärung.