Diffusion in Solids and Liquids VIII

Selected, peer reviewed papers from the 8th International Conference on Diffusion in Solids and Liquids, Mass Transfer - Heat Transfer - Microstructure & Properties - Nanodiffusion and Nanostructured Materials DSL-2012, June 25-29, 2012, Istanbul, Turkey
Erscheinungsjahr 2013
ISBN: 978-3-03785-662-8
Verlag: Trans Tech Publications

Buch, Englisch, 424 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 900 g

This special issue contains selected peer-reviewed papers presented atthe Eighth International Conference on Diffusion in Solids and Liquids(DSL-2012) held at the Hotel Kalyon Istanbul, Turkey during the period 25th-29thJune, 2012.The goal of the conference was to provide a unique opportunity toexchange information, to present the latest results as well as to review therelevant issues oncontemporary diffusion research. Young scientists were especially encouraged to attend the conference and to establish international networks with well-known scientists.Volume is indexed by Thomson Reuters CPCI-S (WoS).

Autoren/Hrsg.

Öchsner, Andreas

Murch, Graeme E.

Shokuhfar, Ali

Delgado, João M.P.Q.

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde
• Naturwissenschaften Physik Thermodynamik Festkörperphysik, Kondensierte Materie

Inhaltsverzeichnis

Preface and Committees
Nanometric AlNi Precipitation in a 84.68 wt.% Cu-11.25 wt.%Al-4.07 Wt%Ni Shape Memory Alloy
Transportation and Manufacturing Technology System (TMTS) Vibro-Impact Treatment of Large Pieces
Evaluation of the Impact of Temperature and Type of Catalyst on the Bio-Oil Quality Obtained by Biomass Catalytic Pyrolysis Process
Preparation of Ferromagnetic Manganese Doped Cobalt Ferrite-Silica Core Shell Nanoparticles for Possible Biological Application
Customer Satisfaction Model in Nano Food Products Using by Customer Knowledge Management (CKM) Approach
Degradation Control of Walls with Rising Damp Problems
The Influence of some Physical Variables in the Capillarity Rise of Different Monolithic Walls
Chemical Kinetics between Brine and Rock Salt Transitions
Quality Improvement and Characteristics of Polyhydroxyalkanoates (PHAs) and Natural Latex Rubber Blends
Thermal Expansion of Copper and Nickel Sulfides and their Alloys
Synthesis and Thermal Stability of Nontransformable Tetragonal (ZrO2)0.96(REO1.5)0.04 (Re=Sc3+, Y3+) Nanocrystals
A New Approach to Surface Tension According to the Surface Topographical Features in Laser Cutting Technology
Identification of Surface Quality of Plastic Electrodes after Blasting
Diffusion of Palm Biodiesel in Elastomers Undergoing Multiaxial Large Deformations
Secondary Oil Recovery by Water Injection: A Numerical Study
Assessment of Energy Consumption and Internal Stresses in Surface Layer in the Abrasive Electro-Discharge Grinding (AEDG) Process
Tribological Investigations of TiC+a-C:H Coatings Manufactured on X38CrMoV5-1 Steel Using PVD Technology
Microstructure and Properties of Heat-Treated 440C Martensitic Stainless Steel
Diffusion of Biodiesel in Rubber and the Resulting Mechanical Response under Cyclic Loading
Thermochemical Nitriding of Commercial Purity Titanium
Numerical Modelling of Metal Foams with Weaire-Phelan Cell
Elaboration and Characterization of Zinc-Based Foams
Drying of Rough Rice: A Numerical Investigation
Ionic Conductivity, Morphology and Transport Number of Lithium Ions in PMMA Based Gel Polymer Electrolytes
Description of Whole Banana Drying through a Diffusion Model Using Numerical Solution via Generalized Coordinates
Numerical Solution of the Three-Dimensional Diffusion Equation in Solids with Arbitrary Geometry for the Convective Boundary Condition: Application in Drying
Precipitation Processes in Mg-Y-Nd Alloys
Response of Hot-Extruded Al-Mn-Sc-Zr Alloy to Annealing with Constant Heating Rate
Experimental and Analytical Investigation of Ammonia Absorption into Ammonia-Water Solution: Free Absorption
An Insight into the Effect of Deformation on Carbide Dissolution in the Band Structure of Bearing Steel
Analysis of Substructure of High-Mn Steels in the Context of Dominant Stress Mechanism
Neuro-Fuzzy Adaptive PID Control of Thermoelectric Module for Metal Hydride Reactor
Effect of CaCO3 Content in Resin Transfer Molding Process
Resin Transfer Molding Process: A Numerical Investigation
Mechanical Properties and Fracture Behavior of Hot Extruded Mg-5Al-3Ca-xNd Alloys at Elevated Temperature
On the Diffusion Profile at the Brazed Interface between Active Filler Metal and CVD Diamond Plates
Numerical Investigation of Rectified Diffusion for an Acoustically Induced CO2 Gas Bubble
Corrosion Resistance of Mg-xAl-3Ca-0.8Sr Magnesium Alloys
Analysis of Impact of Selected Structure Parameters of Reinforcing Preforms for Metal-Matrix Composites on their Saturation Process
Forced Convection Mechanism Failure in the Eye Can Cause Cataract
Forced Convection Mechanism Failure in the Eye Can Cause Macular Degeneration
Fluorescence Study of Ionic Intercalation/De-Intercalation in the Reaction-Diffusion Mediated Polymorphic Transition of a Class of Nanolayered Material
Effect of Interfaces and Cr Diffusion on Stabilizing Cu Conductivity in Nb3Sn-Strands
Cold-Metal-Transfer Arc Joining of Al 6K32 Alloy to Steel Sheets
Influence of Heat Treatment on Corrosion Resistance of the ZnAl22Cu3 Alloy
The Effects of CaF2 in Mica Glass-Ceramics
Design of Biogas Pipeline Energy and Sanitation
Investigation of Salt Diffusion in Soil by Using Radiotracing Technique
Mass Transfer with Chemical Reactions in Porous Catalysts: A Discussion on the Criteria for the Internal and External Diffusion Limitations
The Process of Tungsten-Nitride Precipitation upon Nitriding Ferritic Fe-0.5 at.% W Alloy
Refractive Index and Extinction Coefficient of ZnO:Al Thin Films Derived by Sol-Gel Dip Coating Technique
Surface Characterization of Irradiated Zno:Al Thin Film by Reactor Neutrons
Growth of Calcium Phosphate Coating on Ti-7.5Mo Alloy after Anodic Oxidation
A Contaminant Transport in Partially Saturated Porous Media
Infiltration in Porous Media Using Centrifuge with Moving Arm
Mechanical Properties Gradient Existing in Real Castings Taken into Account during Design of Cast Components
Accessing the Influence of Hess-Murray Law on Suspension Flow through Ramified Structures
Ammonia Synthesis Using Magnetically Induced Reaction
Salt Degradation in Stone of Old Buildings
Wetting and Drying of External Surfaces with ETICS Systems
Capacitance-Voltage (C-V) Properties of ZnO:Al/p-Si Heterojunctions
Jahn-Teller Phase Transitions in Non-Stoichiometric Oxides with Perovskite Structure: Effect of Mechanical Activation
2D Flow in a Wall-Bounded Porous Medium
Sewage Sludge Flow and Drying Characteristics in Paddle Dryers
Effect of Mechanical Activation on the Electrochemical Behavior of MnO2
The Reducibility of the Iron Ore Materials as Instrument of the Coke Consumption Decrease in the Blast Furnace Smelting
Nanozirconium Carbide Powder Synthesis via Carbothermal Route
Optical Chemical Nanosensors in Clinical Applications