Buch, Englisch, 1194 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2120 g
ICIE-2017
Buch, Englisch, 1194 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2120 g
ISBN: 978-3-0357-1152-3
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Conference Committee, Sponsors
Chapter 1: New Functional and Structural Materials and Processing Technologies
Physical-Chemical Properties of Molybdenum Films Prepared with Magnetron Sputtering
Optimization of Synthesis Mode for Hydro Silicate-Based Supplements Used for Lime Dry Construction Mixtures
Current State and Future Prospects for Improvement of Mineral Melt Production Technologies
The Wear Resistance of Mottled Iron with Stabilized Carbide Phase
Research of Activity of Natural Radionuclides in Construction Raw Materials of the Volgograd Region
Sulfur Composite Materials Based on Sulfide Containing Industrial Waste
Environmental and Technical Possibilities of Marble Waste Recycling in Bricks and Sorbents Production
Improvement of Environmental Safety due to Utilization of Industrial Wastes in Refractory Concretes Production
Multi-Layer Wood-Polymer Composite
Study of Residual Stresses and Surface Hardening in Tubes for Nuclear Steam Generators
Multifractal Parametrization of Welded Joints Structure as an Instrument of Diagnostics and Detection of Defects
Assessment of Welded Joints Structure Defectiveness Based on the Presence of Non-Metallic Inclusions
Pulse Processing of Molten Metals
Choice of Laser Cementation Method of Blade Woodcutting Tools
Bolts Manufacturing Technology
Strengthening Mini Silo Construction Made of Reinforced Concrete Blocks with Carbon Fiber Lamellae
Strengthening Building Structures with Polymer Composite Materials
Influence of Concrete Mix Transportation with Inertia Conveyor on Concrete Properties
Structure and Properties of Concrete for Injection with Two-Stage Expansion
On Effect of Superplasticizers and Mineral Additives on Creep Factor of Hardened Cement Paste and Concrete
Phenomenological Model of Low-Carbon Steels Hardening during Multistage Drawing
Low Density Cellular Concrete Made of Reftinskaya SDPP Fly Ash
Future-Oriented Technology of Preparing Suspensions of Metals
On Reliability of Stainless Maraging Steel
Ti-TiN Multilayer Coatings Obtained by ION FLUX Surface Modification
Wood Heat Treatment in Construction Materials Production
Lamb Wave Analysis for Plate of Weak Ferromagnetic YFeO3
Evolution of BrOCS 5-5-5 Alloy Microstructure and Mechanical Parameters under Intensive Plastic Deformation Conditions
Multi-Component Coatings Formation on Polycathode Magnetron Sputtering Systems
Thermal Modification of Wood in Production of Finishing Materials
Behavior of Micro-Alloyed Steel at Thermal Treatment
Diffusion Saturation by Titanium from Liquid-Metal Media as Way to Increase Carbide-Tipped Tool Life
Effect of Aggressive Components of the Marine Environment the Protective Properties of the Textile Materials
Expansion of Concrete Functionality due to Use of New Hydrophobic Additives
Fusion Technology Nanopowder Magnetic Fluids
Integrated Method of Study of Hardened of Details
Investigation of Heat Resistance of Al-Ni Layered Coating
Islet Nitriding of Product Surfaces Made from Alloy Steel
Mechanical Properties and Stress-Strain Behaviour of Binary and Ternary Composites Based on Polyolefins and Vegetable Fillers
New Composite Dispersion Reinforcement Materials with Modulated Characteristics
New Unconventional Additives in Concrete Technology for Expansion its Functionality
Physical and Technological Features of Formation of Large Thickness Welded Joints in Electron-Beam Welding
Technology of Wood Waste Processing to Obtain Construction Material
Process of Shaped Metal Billets Production from Compositions Based on Iron Powder, Iron Oxide, and Binder
Quality Evaluation of Platinit Wire by Different Producers
Research of Wood Thermal Modification Process in Flue Gases Environment
Study of Carbon Fiber Materials Sorption Capacity to Remove Heavy Metal Ions and Oil Products from Wastewater during its Treatment
Study of Compression Soft Porous Foam Materials
Technological Increase of Adhesion Strength between Antifriction Coating and Base in Bimetal Fluid-Film Bearings
Technology of Mineral Raw Materials Granulation by Electric Arc for Manufacturing of Welding Fused Flux
Use of Low-Grade Vegetable Raw Materials in Production of Composites by Preliminary Processing
Polymer-Bitumen Binder Based Multifunctional Material
Properties of Elastomeric Adhesive Composition Based on Chlorinated Isobutylene Isoprene Rubber Obtained by Mechanochemical Halide Modification
Calculation of Joint Plastic Deformation to Form Metal Compound in Cold Condition
Carbonic and Mineral Adsorbent, Produced of Slurry Withdrawal of Oil-Extracting Production
Cold Spray Repairing Corrosively Damaged Areas on Aircraft Constructions
Colloid-Chemical Bases on Creation of Multifunctional Modifiers of Concrete Mix and Concrete
Combined Influence of Opoka and Slag on Cement Properties in Presence of Superplasticizer
Creating Carbon Nanotubes Microenvironment in Surfactant Water Solutions
Examining the Microstructure of Industrial Leaded Brass Blanks for Quality Control
Extension of Raw Material Base for Ceramic Building Bricks Production
Improving Masonry and Protective Paints Quality
Improving the Reliability of Shell Structures Made of Composite Nanomaterials
Ion Implantation Modification of Surfaces
Nano Additives Influence on Fuel Oil Properties
Research of Efficient Methods of Superplasticizer Introduction into Cement Materials
Research of Materials for High Temperature Electromechanical Energy Converter
Simple Universal Kelvin Equation Valid in Critical Point Vicinity and its Application to Carbon Dioxide Capillary Condensation in Mesoporous Silica
Study and Analysis of Aluminate Dry Construction Mixtures Properties
Chemical Aspects of the Obtaining of Iron-Containing Coagulant-Flocculant from Electric Steel Melting Slag for Wastewater Treatment
Functional Nanostructured Tribotechnical Materials
Research on Influence of Technology of Bimetal Fluid-Film Bearing Manufacturing on Microstructure and Microhardness of Antifriction Coating and Steel Base
Study of Physical and Mechanical Properties of Non-Polar Rubber-Based Sealants Depending on Filler Type and Volume
Study the Effect of Heavy Elements Nanoparticles in the Photons Energy Spectrum in a Tissue-Equivalent Medium
The Production and Subsequent Selective Laser Melting of AlSi12 Powder
Theoretical and Experimental Investigation of Vibration Damping Sheet Dynamic Behavior
Using Mathematical Modeling to Develop Electrode Coating Composition for Stable Arcing and Arc Restarting
Combined Extender Pigments Based on Industrial Wastes
Influence of Al-Cu-Mn-Fe-Ti Alloy Composition and Production Parameters of Extruded Semi-Finished Products on their Structure and Mechanical Properties
Influence of Gas Shielding Method in Welding with Consumable Electrode on Heat Distribution in a Welded Product
Influence of Selective Laser Melting Process Parameters on Porosity of TiAl6V4 Alloy Fabricated by 200W CO2 Laser
Investigation of Ba-Fe-O System near the BaFe12O19
Synthesis of EP648-TiC Metal Matrix Composite Powder for Selective Laser Melting by Ball Milling
Effect of Heat Treatment on Change Concentration of Powders in Gradient Material
Electro Physical Hardening of Non Metallic Composite Materials in Additive Technology
Heating and Cooling Impact on Mechanical Properties of RIP Electric Insulator for High Voltage Inputs
The Use of Ferrovanadium Production Sludge Wastes in Claydite Gravel Technology
Numerical Analysis of Stress-Strain State and Crack Propagation in Welded Samples
Capillary-Porous Effects in Concrete during Ice Abrasion
Sorption Properties of Nanostructured Calcium Aluminosilicate with Respect to Cesium Ions
Temperature and Humidity Dependence on Strength of High Performance Concrete
Refractory Core-Shell Powders for Additive Industries
Formation Structure and Properties of Parts from Titanium Alloys Produced by Direct Laser Deposition
Hydrofluoride Method of Complex Processing of Titanium-Containing Raw Materials
Modified Geomembrane Compositions for Hydraulic Structure Impervious Coatings
New 3D Cross-Linked Copolymers with Variable Mechanical Properties and High Durability
Research of Processes of Products Fabrication by Self-Propagating High-Temperature Synthesis (SHS) Method
Applying the Electron Concentration Calculation Method to Assess the Influence of Hydrogen on the Position of the Variable Solubility Lines in Ti-Cr System
Atomic Structure Design of Rapidly Quenched Amorphous Cobalt-Based Alloys
Beta-Phase Decomposition Sequence during Continuous Cooling of High-Temperature Titanium Alloy
Comparative Assessment of Resistance of Hardwearing Anodes, Ternary Coated with Iridium, Ruthenium and Titanium
Composite Material for Railroad Tie
Designing Metamaterial with Arc-Structure for Wide Broad Vibration Isolating
Determining Undeformed Chip Thickness Models in Milling and its Verification during Wood Processing
Effect of Pore Architecture of Titanium Implants on Stress-Strain State upon Compression
Effect of Thermal and Thermal Magnetic Treatment on Damping Properties of Fe-Cr-Al Alloys
External Factors Impact on Basic Properties of Hovercraft Skirt Materials
Features of Zone Thermal Recrystallization of Germaniun Layers Grown on Silicon Substrates from a Discrete Source
GaN Materials Nanostructures Growth Control in the Epitaxial Units
Hardening Kinetics of Geopolymer Binder Based on Magmatic Rock with Mineral Additives
Influence of Constant Magnetic Field on Domain Wall Dynamics in YFeO3
Influence of Heat Treatment on Wear Resistance of Alloyed Hadfield Steel and Phase Transformations in it
Influence of Heating Temperature and Cooling Conditions on Structure and Properties of Two-Phase Titanium Alloy
Influence of Oxygen Concentration on Plasma Dynamic Synthesis Product in Fe-O System
Integral Performance Criterion of Self-Propagating High-Temperature Synthesis Ferrosilid for Optimization of Charge Composition
Investigation of Phase Composition of Samples Sintered from Tungsten-Containing Composite Micro- and Nano-Powders
Investigation of Titania Nanotube Arrays Obtained from Glycerol Electrolytes
Limiting Product Surface and its Use in Profile Milling Design Operations
Mediated Electrosynthesis of Cobalt Nanoparticles from Ionic Liquids
Multicomponent Diffusion in Metallic Systems Exposed to E-Beams
New Material Creation by Phase Separation in Liquid Mixtures Induced by Non-Uniform Electric Field
New Method of Quench Surface Turning
On Deformation Powers of the Explosion Welded and Rolled Titanium-Aluminium Composite
Overall Hardening of Solid-Rolled Wagon Wheels by Volume Quenching and Surface Plasma Processing
Phase Transformations in D6AC Steel during Continuous Cooling
Phase Transformations in Novel Medium Carbon High Hardenability Steels
Re
