Sonstiges, Englisch, Band Volumes 727-728, 2080 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
Sonstiges, Englisch, Band Volumes 727-728, 2080 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
ISBN: 978-3-03795-303-7
Verlag: Trans Tech Publications
This special collection of peer-reviewed papers focuses on the powder technology of metals, ceramics and composites. The 343 papers are grouped into 3 chapters: 1 - Powder Metallurgy; 2 - Ceramics I; 3 - Ceramics II. The topics covered range over powder production, ceramics processing, properties, powder compaction and sintering, injection moulding and mechanical alloying. A special session dealt with nanomaterials, fuel cells, storage energy materials, biomaterials, sintering atmospheres, PM markets, characterization and applications.
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Metallische Werkstoffe
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Verbundwerkstoffe
- Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Pulvertechnologische Verfahren
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Keramik, Glas, Sonstige Werkstoffe
- Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Metallurgie
Weitere Infos & Material
Structural Comparison of Amorphous, Nanocrystalline and Microcrystalline Al90Fe7Nb3 AlloysSynthesis of Powders Nanometer Al2O3 Method by Sol-GelNickel Electrodeposition over Powder Compact for Irradiation TargetAnalysis of the Use of a Filtering Medium in Different Parts of a Centrifugal SeparatorThree-Dimensional Reconstruction of the Porosity of Pellets of Iron Oxide and Coal Powders by Serial SectioningPreparation and Characterization: The Effect of Incorporation by Ion Exchange of Pt, Ni and Ru on a H-ZSM5 ZeoliteTiN/ZrN Multilayer PVD Coatings on Titanium Alloys Produced by Powder MetallurgyProduction of Aerospace Tial Intermetallics for High Temperature Applications by Powder MetallurgyMicrostructural Analysis of Ti-6Al-4V Alloy after Plasma Immersion Ion Implantation (PIII)The Influence of Zinc Doping on the Grain Size and Productivity of Diamond Synthesis in the Ni-Mn-C System at High Pressure and High TemperatureProcessing and Characterization of ?-Ti Alloys by Means of Powder Metallurgy Processing and Blender ElementalThree-Dimensional Stochastic Modeling and X-Ray Microtomography Applied to Titanium Scaffolds: A Comparative ApproachFatigue Strength of Ti-35Nb-7Zr-5TaMicrostructure and Electrochemical Properties of a LaMgAlMnCoNi Based Alloy for Ni/MH BatteriesEffect of the Sintering Atmosphere on the Corrosion Resistance of Titanium for Application as BiomaterialSintering of AISI M2 High Speed Steel with the Addition of NbCEffect of Passivation Treatments on the Corrosion Resistance of PIM 316L Stainless Steel in a PEM Fuel Cell Simulated EnvironmentProduction of Ti-13Nb-13Zr Alloy by PM for Biomedical Applications Using Zirconium Oxide Grinding Bowl and BallsThermogravimetric Study of the Oxidation Behaviour of Sintered Stainless Steels: Influence of Powder Size and CompositionUtilization of Solar Energy as Heat SourceA Simple Algorithm for the Calculation of Hysteresis for Isotropic NdFeB MagnetsStudy of Carbon Influence on Magnetic Properties of Metal Injection Molding Nd-Fe-B Based MagnetsA Model for the Hysteresis Curves of Soft Magnetic MaterialsEBSD Texture Analysis of NdFeB MagnetsOne Domain Wall Hysteresis Model for Spherical GrainModeling the Heat Treatment of Dy-Diffused Nd2Fe14B Magnets: The Shell ModelNucleus Size Determination for Nd2Fe14B, Sm2Co17, SmCo5 and BaFe12O19 MagnetsA General Coercivity Model for Soft Magnetic MaterialsDiffusion Coefficients of Interest for the Simulation of Heat Treatment in Rare-Earth Transition Metal MagnetsThe Samarium Depleted Zone in SmCo5 MagnetsModeling the Densification of FeSi Sintered Magnetic AlloysThermal Aging of Reprocessed NdFeB PowdersAdhesion Tests in Quasicrystal Powders Reinforced Geopolymer CompositesStudy of Obtainment of NiCrAlC Alloys by High Energy Ball MillingEffect of Mechanical Activation on Microstructure and Mechanical Properties of Aqueous Colloidal Processed Nickel Metal Matrix NanocompositesProcessing of Cu-Al-Ni and Cu-Zn-Al Alloys by Mechanical AlloyingVariation of Tungsten Oxide Reduction Mode Using Different High Energy Milling ConditionsStructural Evaluation of Mechanically Alloyed (67-x)Ti-xZr-22Si-11B PowdersEffect of Molybdenum on the Formation of Ti6Si2B in Mechanically Alloyed Ti-Mo-Si-B PowdersOn the Phase Transformation in Mechanically Alloyed Ni-Nb and Ni-Ta and Ni-Nb-Ta PowdersStructural Evaluation of Mechanically Alloyed and Heat-Treated Ti-25at-%Si PowdersPreparation of Ni-Ti-Mo and Ni-Ti-Mo-Zr Alloys by High-Energy Ball Milling and Subsequent Hot PressingRheological Behavior of Blends Gas-Water Atomized Stainless Steel PowderPowder Injection Molding of Multimaterial Parts - Self Lubricating Steel Combined with Plain-Carbon SteelInvestigation of Material Combinations Processed via Two-Component Metal Injection Moulding (2C-MIM)Processing and Manufacturing of Metal Matrix Aluminum Alloys Composites Reinforced by Silicon Carbide and Alumina through Powder Metallurgy TechniquesPreparation of Metal Matrix Aluminum Alloys Composites Reinforced by Silicon Nitride and Aluminum Nitride through Powder Metallurgy TechniquesSynthesis and Characterization Nanoparticles ZnAl1.94(Yb:Er)0.06O4 Functionalized with ChitosanMicrostructure and Adhesion of Diamond CompositesInfluence of a Ti? Coating on the Wear Resistance of Fe-Diamonds CompositesObtention of Aluminium-Quasicrystal Composites by Mechanical AlloyingPhysicochemical Analysis of Ti-Si-B Powder AlloysMechanical Properties of Composite AA2024 Matrix with Aluminium Carbide Dispersed by High Energy MillingTitanium Metal Matrix Composite Laser Coatings Based on CarbidesObtention and Characaterization of the Sn-Ni-Fe-Cu Alloys Applied in Diamond Saw Blade ProductionHard Metal Matrix Composites Reinforced with Cubic Boron NitrideMechanical and Structural Characterization of Cu-Ni-Ag/Y2O3 Composites Obtained by Powder MetallurgyMetal Matrix Composites from Powder Mixtures of Copper, Tungsten, Aluminum and NanodiamondsEffect of the Milling Time and Addition of a Grinding Agent of Quasicrystalline Powder Based on AlCuFeB AlloysStudy of Oxidation on Pr-Fe-Co-B Nanopowders Produced by HDDR and Mechanical MillingNanoparticles Consolidation Mechanism at High Pressure and High Temperature in Diamond-B-Si-Cu SystemCovering with Carbon Black and Thermal Treatment by a CO2 Laser Surfaces of Aisi 4340 SteelCoated Steel Surfaces with WC by Lasers ActionApplication of Sintered Steel for Synchronizer Rings Used in Mechanical TransmissionsRecycling of Zircaloy Machining Chips by VAR Remelting and Powder Metallurgy TechniquesFabrication of Powder from Ductile U-Mo Alloys for Use as Nuclear DispersionStudy of Sol-Gel/Powder Metallurgy Technique for Processing Titanium PartsQuantitative Evaluation of Interstitial Elements in the Processing of Ti-6Al-4V Alloy by Powder MetallurgyThe Possibility of Production of Cemented Carbide under High Pressure and High TemperatureEffect of the Impurities on the Phosphoric Acid ProcessStudy of the Utilization of Chromium Plating Waste by Mechanical ActivationProcessing of Ti Scaffolds by Sintering with Different SpacersTechniques and Tips to Optimize, Control and Stabilize the Atmosphere inside a Continuous Sintering FurnaceService Life Extension of Stainless Steel Wire Mesh Belts for Sintering FurnacesStudy of the Elasticity Module through Indentation Instrumented Technical of AlCuFeB Quasicrystalline AlloyMagnetic Properties and Hardness of Nanostructured WC-Co Cemented CarbideMicrostructure and Wear of a Cu-Si-B Alloy and Diamond Composites Obtained in High Pressure and High Temperature ConditionsModeling the Densification of 316L Stainless SteelsSintering of Cubic Boron Nitride Using Titanium Based BindersLiquid Phase Migration during Diamond Powder Sintering by Infiltration MethodPlasma Sintering of the Steel Reinforced with Nanostructured CarbidesHigh-Pressure Assisted Sintering of Ti-20Si-10B and Ti-10Si-5B PowdersOverspray Powder Characterization of Fe-Based Glassy AlloyEvaluation of Changes in Microstructural Coatings Deposited by Thermal SprayImprovement of Tribological Properties by Titanium Nitride Deposition in Titanium Alloys Produced by Powder MetallurgyMetal Recovery of Discarded Stacks and Batteries, Liquid-Liquid Extraction and Stripping Parameters EffectStudy Morphologic and Microstructural of the System CeO2-NiO Obtained by Polymeric Precursor MethodInfluence of High Energy Milling on the Airflow Sensorproperty of the NBCa CeramicApplications of PZT Dielectric Ceramics in High-Energy Storage SystemsStructural Characterization, and Magnetic Morphological Study of Ni+2 Doped ZnO Synthesized by Combustion Reaction Application for DMSEffect of Attrition Milling and Calcination Temperature on Phase Composition of Strontium-and Magnesium-Doped Lanthanum GallateCeramic Coating Based on La, Sr and Co on Ferritic Stainless Steel for ITSOFC InterconnectsMagnetic Evaluation of Ni-Zn Ferrites Doped with AluminiumElectrical and Microstructural Properties of Varistors Based on Nanostructured Tetra-Needle Like Zinc Oxide PowdersVariation of Resonant Frequency with Temperature in Ceramic Resonators Based on Ba2Ti9O20 CompositionsPorous Ceramic as Air Humidity SensorsQuantification of Phase Compositions Present in the System [(NiO)x].[(CoO)1-x].[(Al2O3)], 0.05 = X = 0.95, and the Effect in the Electrical Properties of Semiconductor as a Consequence of the CO+2 VariationProduction of Oxide Ceramic Matrix Composites by a Prepreg TechniqueFiber-Matrix Compatibility in LZSA Glass-Ceramic Matrix CompositesRBMAO: A Novel Route for Porous Matrix CompositesModeling of Ceramic Oxide Fiber Bundles Mechanical PropertiesNickel-Polyaniline Composite Electrodes for Electrocatalytic Reduction of Hydrogen in Alkaline MediaComposites of Cement Matrix Containing Residue of PET Bottles and Stone Dust Replacing the Conventional Materials - Physical Chemistry and Mechanics EvaluationsLa2O3 Reinforced Al2O3-TiO2 Ceramic Composites for Inert Coating of Metallic Parts for Petroleum IndustrySintering Study of Al2O3/NbC/Wc Micro-NanocompositeEffects of Femtosecond Laser Irradiation on the Surfaces of Alumina and Alumina-Zirconia CompositesPreparation and Characterization of Composite of Polyamide 6/Nickel FerriteSynthesis and Characterization of Chitosan/Hydroxyapatite Biocomposites Obtained by Reaction of PrecipitationSimplex Network Modeling for Press-Molded Ceramic Bodies Incorporated with Granite WasteRheological Study of Iron Oxide Reinforced by Ceramic NanoparticlesProduction of Borosilicate Glasses from Residues of Ornamental RocksEvaluation of the Thickness and Permeability in Asymmetric Membranes of TiO2 Supported on AluminaEffect of Sense and Spacing in Parallel Scratches during Brittle Machining of Stoneware TilesRheological Analysis of Ceramics Suspensions with High Solids LoadingDevelopment of Ultrafiltration Tubular Ceramic Membrane Using in their Composition Granite ResidueCharacterization of LSCF-Based Composite and LSCF as Cathodes for Intermediate Temperature SOFCsManufacture and Characterization of Alumina Ceramic Foams for Porous BurnersForming of Cathodic Ceramic Film Using Airbrush for Application in High Temperature Solid Oxide Fuel CellsInfluence of Firing Temperature on the Pozzolanic Activity of Kaolin WastesEnamel Development and Application on the Pottery of IcoaraciPorous Media of LZSA Glass-Ceramic for Burner ApplicationsInfluence of Substrate Temperature in the Morphology and Microstructure of YSZ Films Obtained on LSM Porous Substrate via Spray PyrolysisCharacterization and Technological Applications for Kaolin Processing WastesUse of Fine Wastes from Dimension Stone Industry in the Manufacture of Ceramic TileCharacterization of Geological Materials of S?o Fid?lis/BR for Slip UseCharacterization of Blast Furnace Sludge for Clayey Ceramic FabricationInfluence of Firing Conditions on Properties of Red CeramicBovine Bone Processing for Biofilter ApplicationProduction, Sintering and Mechanical Properties of Ca2MgWO6, a New Complex Cubic Perovskite CeramicBoron Nitride Ceramic Composite Obtained by High Pressure and High Temperature SinteringEvaluation of Compaction Behaviour of Spray-Dried Alumina by Hg Porosimetry and SEMManufacture of YSZ-LSM Semi-Cell by Colloidal Processing8YSZ Tapes Produced by Aqueous Tape CastingThe Effect of the Dust Cake Resistance on Fluid Flow Passing through the Filter MediaEffect pH Variation of Powder Materials of the Composite Oxide Ba(x)Sr(1-x)Co(y)Fe(1-y)O3-d Obtained by Citrate-EDTA MethodCharacterization of SOFCS: A Crystallographic Analysis and First Steps towards an Impedance Spectroscopy ApproachCharacterization of New Occurrences of Clays in the City of Pedra Lavrada-PB, for Use as Ceramics Raw MaterialsSynthesis of Mulita Nanometric from Delaminated Bentonite-Study of the Percentage of Stages and Size of CrystalAlumina Foam Coated with Strontium Oxide as a Heterogeneous CatalystRheological Studies of Brazilian Clays in Water-Alcohol SuspensionsStudy of the Sintering of Mixtures Al2O3-Nb2O5 and Y2O3-Nb2O5Zirconia Blocks Properties Used for CAD/CAM Dentistry RestorationsProperties and Microstructure of Clay Ceramics with Granite Waste for Press-Molded Structural BlockLife Cycle Assessment of Ceramic BricksProduction of Porous Silicon Carbide Ceramics by Starch Consolidation TechniqueEvaluation of the Influence of the Silane Drying Temperature on the Feldspar and Zirconia-Based Ceramics SurfacesEffect of Surface Treatment of Yttria Stabilized Zirconia for Dental ProsthesesCharacterization of the City of Red Clay Apodi-RNAnalysis of the Incorporation of Scheelite Residue in Kaolinitic Clay of Boa Sa?de-RNSintering of B4C-SiC Composites with ALN-Y2O3 AdditionEffects of the Precursor Solution Addition Time in the Solochemical Synthesis of ZnO NanocrystalsSize Distribution of TiO2 Nanoparticles Generated by a Commercial Aerosol Generator for Different Solution Concentrations and Air Flow RatesModification of Brazilian Bentonite Clay for Use Nano-BiocompositesNanostructured YSZ Thin Film for Application as Electrolyte in an Electrode Supported SOFCInfluence of Bentonite Clay in the Formation of Polypropylene / Clay NanocompositesApplications of Fourier Transform Infrared and X-Ray Techniques to Analyze Nickel Ferrite Nanoparticles ProducedZnO-TiO2 Composite Formed by Mixed Oxides via PolyolStudy of Nanocomposites of Polyamide 6.6/National Bentonite ClayPreparation of Organoclay for Polymeric Nanocomposites MembranesSynthesis and Characterization of Strontium and Calcium Titanate Polycrystalline Powders by a Modified Polymeric Precursor TechniqueCeramic Processing of NBC Nanometric Powders Obtained by High Energy Milling and by Reactive MillingCeramic Compacts Based on Sintered ZrO2 NanopowderPerformance of Nanostructured Diamond Composites in Wear TestsUse of Niobium Oxide as a Binder in the Production of Diamond Nanostructured CompositesPurification of a Brazilian Smectite ClayEffect of Glassy Phase Additions to Zirconia on its Sintering Behavior and MicrostructureEffect of Glassy Phase Additions to Zirconia on its Mechanical PropertiesMechanical Characterization of Zirconia Synthesized by the Sol-Gel ProcessMicrostructural Evaluation of Clayey Ceramic Incorporated with Powder Waste from the Sintering Plant of a Steel-Making IndustryFiring Behaviour of a Clayey Ceramic Body for Rustic Floor TilesReformulation of a Kaolinitic Clay Ceramic Body with Sand and Flux Clay for Roofing Tiles ProductionMicrostructural and Magnetic Analysis Ni-Zn Ferrite Sinterized in the Conventional and Microwave OvenSintering of Ni-Zn Ferrite by Microwave EnergyEffect of the Dwell Temperature on Spark Plasma Sintered CaCu3Ti4O12Effect of the Dry Bulk Density on the Fired Properties of Clayey CeramicsUse of Ash from the Incineration of Elephant Grass (Pennisetum purpureums shaum) into Clayey CeramicCharacterization and Thermal Behavior of Red Ceramic Incorporated with Flat Glass WasteInfluence of Heating Rate and Burning Temperature on the Thermal Decomposition of Textile SludgeMicrostructure of Ceramics TiO2 Obtained by Protein ConsolidationWollastonite as a Flux for Ceramics BodiesEffect of TiO2 and TiB2 on Pressureless Sintering of B4CSintering Behavior of LZS Glass-CeramicsSintering of Alumina Powders Obtained by a Pechini-Type Method with Addition of SeedsUse of Silicon Nitride as an Additive in the Production of cBN Compacts for Cutting ToolsImprovement of Conventional Polycrystalline Diamond Composites by Nanodiamond IncorporationTechnical Performance of High Pressure and High Temperature Processed TiC Ceramic ToolsInfluence of Cu and Ti Doping on Hard Metal Matrix of Diamond Embedded Composites for Drilling ToolsInfluence of the Granite Waste into a Clayey Ceramic Body for Rustic Wall TilesMicrostructural and Dielectric Properties of Conventional and Microwave Sintered CaCu3Ti4O12 CeramicsContinuum Isotropic Elastic Model for Sintering of Ceramic Materials Sintering of Yttria Stabilized Zirconia in Tetragonal Phase by Two Steps SinteringInfluence of CAD/CAM Grinding in the Performance of Sintered Dental Zirconia FrameworkMicrostructural and Mechanical Properties Changes of Silicon Nitride Based Ceramic Using Post-Sintering Heat TreatmentInfluence of Addition of Polymeric Precursors of Ceramics on Sintering of Al2O3A Critical Analysis of the Importance of Compaction-Pressure on the Dimensional Distortion of ZrO2-Y2O3 Dental ProsthesesEvaluation of Mechanical Properties of Dental Feldsphatic Porcelains for Metal and Zirconia CoreSynthesis and Characterization of SrO-Supported Al2O3 Applied as Heterogeneous CatalysCharacterization of Hydroxyapatite-Titanium Oxide Scaffolds Made by the Polymeric Sponge MethodCharacterization Optical of ZnAl2O4 Doped with Eu3+ Functionalized with ChitosanAntibacterial and Antifungal Glass with High Biocide Performance: Increased Antimicrobial Efficiency by Acid ActivationPrimary Implant Stability in Calcium Phosphate Cement: Clinical, Radiographic and Histological AnalysisDegradation of Y2O3-Stabilized ZrO2 Ceramics in Artificial Saliva: ICP Analysis of Dissolved Y3+ and Zr4+ IonsDevelopment of Polymer/Nanoceramic Composite Material with Potential Application in Biomedical EngineeringDispersed Hydroxyapatite Bioglass 45S5 Composites: Comparative Evaluation of the Use of Bovine Bone and Synthetic HydroxyapatiteExtracellular Synthesis of Silica Oxide Particles by Fusarium oxysporum from Rice Husk AshLithium Disilicate Bioceramic Obtained from Alternative Silica Source, the Rice HuskSynthesis of Alpha-Tricalcium Phosphate by Wet Reaction and Evaluation of Mechanical PropertiesProperties of Calcium Phosfate Cement with Addition of Dispersant and HydrogelPolydimethylsiloxane/Calcium Phosphates Composites: Effect of the Fillers Modification on the Cross-Linking and Surface EnergyEffect on Mechanical Strength of Tricalcium Phosphate Cement by Additions of Sodium AlginateEvaluation of a-Tricalcium Phosphate Cement Obtained at Different TemperaturesPreparation of Al2TiO5-Al2O3 and Al2TiO5-Al2O3-TiO2 Ceramics by High-Energy Ball Milling and SinteringObtaining of Nanoapatite in Ti-7.5Mo Surface after Nanotube GrowthStudy of the Spheronization Process of Glass Particles for Internal Selective Radiotherapy ApplicationSubcritical Crack Growth Velocities (v-K Curves) of Dental BioceramicsFerrite Ni0,5Zn0,5Fe2O4 Synthesized by Combustion Reaction in a Microwave Oven Using Urea and Glycine as Fuel: Influence of PowerNew Routes Study for Synthesis of Molecular Sieves Type Al-MCM-41 and Al-SBA-15Molecular Sieves (MCM-41, Al-MCM-41) Characterization Using Different Silica SourcesPreparation and Characterization of Zeolite ZSM-5 in the Template: Effect of Crystallization Time on the Structure and Textural PropertiesEvaluation of the Bioactivity Behavior of a 48 Wt %SiO2 Bioglass through Experiments in Simulated Body FluidEvaluation of the Apatite Coating on Silicon Nitride Based Ceramics Sintered with Re2O3 Additives (Re = Y, La, Yb)Influence of the Urea Content in the Combustion Synthesis for Preparation of NiAl2O4 Support Catalytic to Steam Reforming of MethaneInfluence of Preparation Method of the CeO2 over their Structural CharacteristicsSynthesis of ZnAl2O4 Catalytic Support by Combustion Reaction Using Different FuelsInfluence of the Ratio between the Amounts of Reagent Total/H2O to Obtain Ferrites Mn0.65Zn0.35Fe2O4 by Combustion ReactionComparative Analysis of Sintering Mn0.65Zn0.35Fe2O4 Ferrite by Microwave Energy and N2 AtmosphereInfluence of Citric Acid/Metallic Cations Ratio in the Structure, Morphology and Photocatalytic Activity of TiO2 Prepared by Pechini MethodSynthesis and Characterization of Cu0.5Zn0.5Fe2O4 Ferrite for Application as a Soft Magnetic MaterialPreparation of NiFe2O4 and ZnFe2O4 Samples by Combustion Reaction and Evaluation of Performance in Reaction Water Gas Shift Reaction - WGSRSynthesis and Characterization of Gadolinia-Doped Ceria with Manganese AdditionEvaluation of Catalyst Ni0.4Cu0.1Zn0.5Fe2O4 on Methyl Esterification of Free Fatty Acid Present in Cottonseed OilSynthesis of Inorganic Pigments from Glass-Ceramics of System Li2O-ZrO2-SiO2 and Waste from Metallurgical IndustryPrecursors Influence on CaCu3Ti4O12 SynthesisInfluence of Organic Solvent on Solvothermal Synthesis of Samaria and Gadolinia Doped Ceria ? Nickel Oxide CompositesCombustion Synthesis of ZnAl2O4 Catalyst Using Glycine as Fuel for the Esterification and Transesterification of Soybean Oil: Influence the Form of HeatingCombustion Synthesis of LSM Powders from a Precursor Solution with Mixed FuelsProcessing and Characterization of Al2O3-YAG CompositeStudy of Polymorphs of Zirconia in the System ZrO2: ? wt% Re2O3 Obtained by Polymeric Precursor MethodNew Features Regarding the High Pressure and High Temperature Diamond Synthesis Growth in the Ni-Mn-C System with Iron AdditionsSynthesis of Zeolitic Materials Using as a Source of SiO2 and Al2O3 Calcined Kaolin WasteCarbon Nanostructures Synthesize from Coconut Coir Dust Mediated by Layered Clays through Hydrothermal ProcessParamagnetic Properties of Synthetic Diamond Crystals Obtained in Ni-Mn-C System with Iron DopingInfluence of Rhombohedral Graphite Phase on the Diamond NucleationNovel High Pressure Multi-Anvil Device for Diamond ProductionSynthesis of ZrO2: ? wt% Re2O3 Powders by the Heterogeneous Coprecipitation TechniqueAnalysis of the Hydroxyapatite Incorporate MTA Dental ApplicationSynthesis and Characterization of Porous ZrO2-Y2O3-TiO2 Ceramics Prepared by CoprecipitationEvaluation of Calcined Temperature on the Structural and Morphological Characterization of TiO2 Doped with Zr Nanopowders Obtained by the Pechini MethodCeramic Material from Sewage Sludge as Support Material Supply Water FiltrationInfluence of Addition of Chemically Treated Leather Shaving in the Portland Cement Mortars CharacteristicsEffect of Calcined Red Mud Addition on the Hydration of Portland CementClassification and Use of Fine Wastes from Dimension Stone IndustryRheological Properties of a Sodium Bentonite and Lactose Aqueous DispersionSoil-Lime Blocks Using Construction Residues - Durability StudySilicon Carbide Surface Modification by Nitrogen Plasma ExpanderCVD Diamond Films Growth on Silicon Nitride Inserts (Si3N4) with High Nucleation Density by Functionalization SeedingPurification and Characterization of a Natural Brazilian Clay BlendPurification of Bentonite Clays from the District of Cubati, PB, for Obtainment of Organoclays for Use in Drilling FluidsPreparation of Organovermiculite for Adsorption of Organic CompoundsStudy by Weibull Statistics of Ceramic Products from Rio Grande do Norte, BrazilBi4Ti3O12 Particles Size Influence on Electrorheolocical ResponseInfluence of Organophilization Process Variables in Bentonite Clays from Cubati-PBInfluence of Exchanged Surfactant on the Structure and Adsorption Properties of Brazilian Green Mud ClayEffect of Addition of Quasicrystals in the Formation of Geopolymer Matrix CompositesPorous Anisotropic Alumina Ceramic Membrane: Preparation and CharacterizationStudy of the Application of Non-Plastic Clays from Po?os De Caldas - MGTransition Metals in Glass FormationCoating Mortar Using Rice Husk Ash as BindingAlumina Residue Characterization to Produce Tubular Ceramic MembranesUse of Waste Flat Glass in the Formulation of Masses for White Porcelain in Partial Replacement of FeldsparEstudy of Natural and Degradation by Salt Spray of Red Ceramics Incorporated with Ornamental Rock WasteElectronic Waste: Characterization of the Glass of Cathode Ray Tube Computer for Making Decorative Pieces by RecyclingStudy of Adsorption Kinetics of Heavy Metals in Acid Drainage from Coal Mining in Type A ZeolitesMixture of Granite Waste and LD Steel Slag for Use in Cement ProductionUse of Calcined Tannery Sludge Containing Chromium Compounds in Soda-Lime Glass FabricationTire Rubber Powder/ Rice Husk Ash Polymer CompoundSystematic Characterization of Different Quaternary Ammonium Salts to be Used in OrganoclaysDevelopment of Organoclays for Use in Oil-Based Drilling FluidsNonionic Surfactant Organoclays Obtaining from Pedra Lavrada District Clays, PB, BrazilEvaluation of the Permeation of O2, Co2 and Water Vapor in Membranes of Polyetherimide/Clay National NanocompositesInvestigation and Structural Characterization of Nickel Ferrite Nanoparticles Produced by Proteic Sol-Gel Method Using Two Kinds of Organic PrecursorsCharacterization of Fluorescent Lamp Glass Waste PowdersCharacterization of Industrial Wastes, Glass and Ceramic WoolSEM, XRF, XRD, Nitrogen Adsorption, Fosters Swelling and Capacity Adsorption Characterization of Cloisite 30 BEffect of Gel Chemistry on the Machinability of Green SiC Parts Produced by GelcastingThe Behavior of Galvanized Steel Coated with a Double and Triple Layer of Hybrid FilmsElaboration and Characterization of Siloxane-PMMA Hybrid Films on Tinplate SubstratesEffect of Surface Properties on Particle Growth Kinetics for Polymer Coating in Spouted BedStudy of Titanium Surface Topography Influence on Biomimetic Coating DepositionModeling of the Fischer-Tropsch Synthesis Aiming to Predict the Production of Paraffins and OlefinsContainerless Solidification of Eutectic PbSn Alloy Droplets in a Drop TubeThe Influence of the Operating Parameters of Titanium Electropolishing to Obtain Nanostructured Titanium SurfacesCharacterization and Efficiency Evaluation of Regenerated Filter MediaAnalysis of the Behavior of a Metallic Filter in Particle Removal under High Pressure ConditionsStudy of Iron Nanopowders into Fluids of Industrial LubricationA Theoretical Study on BTX Adsorption into the Surface of Compacted Activated Carbon PowdersStudy of the Influence of Different Synthesis Conditions of PANI-HF in its Property as Ammonia Gas SensorMorphological Characterization of UNCD on Etched SiliconDetermination of the Chemical and Mineralogical Composition of Drilled Cuttings at Different Points throughout the Solids Control ProcessPhysical and Chemical Characterization of Sorghum BagasseSize, Shape and Density Characterization of Tobacco Waste ParticlesModeling the Transport Phenomena of TiO2 Nanoparticles into Leachate of Municipal Waste LandfillsStudy of the Processing Conditions Used to Incorporate an Antimicrobial Additive in Thermoplastic PolymerInfluence of the Polymer Content in the Preparation of Polymeric MembranesInfluence of Molecular Weight of Polyamide 6 in Obtaining of Nanocomposites with National OrganoclayFactorial Design for Experimental Planning of Sludge Waste Incorporated Cement PavementsEffect of Ornamental Rock Sludge on the Strength and Densification of Cement Pavement BlocksEffect of Alumina Ceramic Powder Dispersion on Mechanical Properties of PolyPropylene PolymersProcess Variable Influence on Fertilizer Drum Granulation PerformanceRecycling of Electric Arc Furnace Dust by Adding to Hot MetalNanoparticles of Carbonaceous Minerals in Vulcanized Rubber ProductsNanomaterial as Microbial Agent to PaintsMechanical Properties and Abrasive Behavior of Diamond Incorporated Epoxy CompositesDiscrete Simulation of the Infrastructure for Diamond Embedded Metallic Saw ProductionHybrids Films Obtained on ZnNi Substrates: Effect of Withdrawal SpeedPreparation of UHMWPE/MMT Nanocomposites via Mechanical AlloyingInfluence of Bentonite Clay Content in HDPE NanocompositesStudy Intercalation and Mechanical Properties of Nanocomposites of HDPE/OrganoclayPhysicochemical and Environmental Characterization of Industrial Wastes in PowderThe Influence of Ageing in Pseudoboehmites SynthesisStudy of Polyamide66/Bentonite Clay Hybrid Membranes Obtained by SolutionPolyamide66/National Bentonite Clay Nanocomposites Membranes for Water-Oil SeparationModeling of the Height of Sediment in a Continuous ThickenerExperimental Analysis of Heat Transfer inside Packed Beds of Soybean SeedsExperimental and CFD Simulation of a Bubble ColumnIsoconversional Kinetic Analysis of Pyrolysis of Sugarcane BagasseExperimental Determination of the Permeability of Non-Porous Planar Structures during Operation of Equipment in Own Industrial UnitStudy of Measurement Methods of Particle Velocity in a Spouted BedExperimental Study of the Influence of Vortex Finder Geometry on Hydrocyclones PerformanceDifferential Evolution Algorithm and Response Surface Methodology Applied to Turning Process OptimizationObtaining of Polymer Films from Nylon 6/Bentonite Clay Nanocomposites: Structural CharacterizationSolid - Phase Transformations of Anthracene in High Temperature TreatmentRheological Behavior of Xanthan Gum Solutions to Estimate the Settling Velocity of Particles during Stops Drilling OperationEvaluation of Constitutive Equation for Stress in Solids in Porous Media Composed of Bridging Agents Used in Drilling FluidsInfluence of Filtration Velocity on Cake Formation in Fibrous FiltersAnalysis of the Influence of Mini-Pipes Diameter in the Performance of a Non-Conventional Rotary DryerStudy of Biological Material Separation in HydrocyclonesGranulometric Characterization of Flotation ProductsRheological Study of Polyamide 6/Waste Styrene-Butadiene Rubber (SBR) BlendsSynthesis, Characterization and Thermal Properties of an Europium (III) NanocomplexCharacterization and Efficiency of ZnAl2O4 Spinel Synthesized by Combustion Reaction on the Esterification and Transesterification of Soybean OilResidual Stresses Measurements Using Strain Gages - Aluminum WheelsLaser Modified Thin Layers in Piston Rings