Selected, peer reviewed papers from the 2014 International Conference on Mechatronics Engineering and Modern Technologies in Industrial Engineering (MEMTIE 2014), October 25-26, 2014, Changsha, Hunan, China
Buch, Englisch, 3140 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 5700 g
ISBN: 978-3-03835-379-9
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Elektronik | Nachrichtentechnik Nachrichten- und Kommunikationstechnik Regelungstechnik
- Technische Wissenschaften Technik Allgemein Mess- und Automatisierungstechnik
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Maschinenbau Mechatronik, Mikrosysteme (MEMS), Nanosysteme
- Mathematik | Informatik EDV | Informatik Angewandte Informatik Computeranwendungen in Wissenschaft & Technologie
- Technische Wissenschaften Technik Allgemein Computeranwendungen in der Technik
Weitere Infos & Material
Preface and Conference Committees
Chapter 1: Applied Mechanics and Dynamics, Mechanical Engineering, Manufacturing
Numerical Analysis of the Influence of Export Structure on Jet Fan Aerodynamics Performances
Reliability Analysis of CNC Machine Tools Based on Fuzzy Theory
Research about the Layout of Canted Deck Based on Support Vector Machine
Air Compressor Piston Finite Element Analysis Based on ANSYS
Stress Analysis of Air Compressor Crankshaft Based on ANSYS
Dynamic Characteristics Analysis of Large-Span Cable-Stayed Bridge
Theoretical Model of Suspended Floor under the Seismic Effect
Damping Effect of Suspended Floor in Huge Frame Constructions
A Study on the Inner Surface Pressure Distribution of Fluid in Ninety Degree Elbow Pipe
Numerical Simulation of Flow Fluid in Elbow Pipe Based on FLUENT and the Establishment of the Pressure Model
Optimization of CNC Lathe-Bed Structure Based on Ansys
The Effect of Orifice Plate on Flow Field and Thermal Environment in Oven Box
Progress on Denitration and Desulfuration Technologies for Marine Diesel Engines
Collapsing Strength Analysis of Bending Part Casing in Horizontal Wells under Three-Point Bending
Analysis on Gear Cracking in Bucket Wheel Stacker Reclaimer
Analysis Fracture Failure Analysis of Drill Pipe’s Tool Joint
The Multi-Station Clamp Device of the Long Truss Girder End Parts Processing
Heat Transfer Analysis of Silicone Oil Fan Clutch Based on Finite Element Simulation
Vibration Characteristics for Planetary Geared Systems with Plastic Gears
Analysis of Electrostatic Suspension Kinematic Characteristics of Hollow Be Rotor
Experimental Investigations on the Grinding Temperature of the Superhard Grinding Wheel with Ordering Abrasive Pattern
Three Dimensional Model Construction and Strength Finite Element Analysis of Cold Shearing Machine Crankshaft
Study on the Hamilton Dynamical System of Wheel-and-Rail Dynamical Model of High-Speed Train
The Anti-Vibration Design of the Ball Grid Array Solder Joint
The Analysis of Security Wedge Lock-Rope Mechanism by ANSYS Finite Element Analysis
Probabilistic Safety Pin Coupling Failure Analysis to Explore
Key Technology of Hydraulic System Design of Large-Scale Blow Molding Machine
Research on the Tire Rope Lift-Off Process
Fatigue Life Assessment of Steel Structures of a Metallurgy Crane
Research on the Dynamic Characteristics of the Frame System of Material Wagon
Research on the Variety Law of Time-Dependent Reliability Model of Picking Link Rod in Sewing Machine
Bridge Crane Random Stress Spectrum Processed and Fatigue Life Analysis
Modeling and Simulation Research of Time-Dependent Reliability Model of Link Rod in Needle Bar Mechanism
Rapid Prototyping Technology in the Three Dimensional Model of Hierarchical Processing
Smoothly Blending of Cylinders Whose Axes are Non-Coplanar Based on Smoothly Blended Axes
Analysis of Commercial Vehicle Thrust Rod Load Simulation
Calculating the Torques and Meter Factor of Turbine Flow Meter with Numerical Simulation
Approximate Calculation of the Fundamental Frequency for Beam System Structures
Experimental Study of Elastohydrodynamic Lubrication under Heavy Loaded and Variable Velocity Conditions
Valve-Shut off Scheme and Affected Zone Analysis of Multi-Sources Looped-Pipe Network Based on ARCGIS
Research and Development of Overloading Velocity Jump Line Contact Elastohydrodynamic Lubrication Testbed
The Optimization of Directly Buried Heating Pipe Elbow Based on the ANSYS
Research on Returning Reference Point of CNC Machine with FANUC-31I
Wind Turbine Gearbox Fault Diagnosis Based on Improved HHT
CAE Analysis on the Precision Forging of Big Semimonocoque of Vehicle Axle
Accounting for Climate and Typology of Reuse of Offshore Structures with a Change of Function
Optimization of Tensile Residual Stress on Machined Surface in MQL Turning
Dynamic Simulation Analysis on Slider-Crank Mechanism of the Mechatronics Fitness and Entertainment Machine Based on ADAMS
Evaluating the Effect of PCD End Mill’s Nose Radius on Machinability of Titanium Alloy Ti-6Al-4V in High Speed Milling
Study on Interaction Theory of Thermal Distortion Friction Pairs and Effect on Friction Coefficient
Experiment on Damping Effects of Damping Ditch in Complex Environment
Research on Thermal Effect Caused by Absorbing Inclusion in Dielectric Irradiated by Pulse Laser
Dynamic Simulation of FCCU under Abnormal Condition
Effect of Spark Timing on Performance of a Hydrogen Gasoline Engine
Performance and Emissions of a Hydrogen-Gasoline SI Engine
Calculation and Analysis of the Turbocharger Assembly Errors
The Multi-Factor Durability Evaluation Model of the FRP Applied to the Structure Based on Environmental Differences
The Innovative Product Design with Combining Engineering Science and "UCD"
Numerical Analysis of Hot Stamping Mold Cooling System Based on FLUENT
A Virtual Environment for Simulation of Formation Flight
Calculation Model of Torpedo Ladle Number
Design Assistant Decision Model for Parafoil Precise Airdrop
Modeling and Simulation for Trajectory of TV-Guided Projectile
Research on Correction for Errors of TV-Guided Projectile Caused by Ballistic Vertical Wind
Research on Operating Speed Based on Driver and Vehicle Response
Reverse Design of the Card Buckle Based on Imageware
Equivalent Stress Cycles Based on District Heating Operation
Energy Management for the Automotive Paint Workshop
Analysis of the Ventilation Effects on Radon-222 Exhalation in a Dead-End Tunnel
Gas Concentration Distribution Law in the Roadway after Coal and Gas Outburst
The Study about Breakdown between the Electrodes Gap Law in WEDM
Numerical Analysis of Cone-Jet Based on EHD Micro-Jet Technology
Experimental Research of HCCI Combustion Based on Late Exhaust Duct EGR Strategy
Chapter 2: Measurement and Instrumentation, Monitoring, Testing and Detection Technologies
Transformer Region Customer Information Detection System
Underwater Target Detection Based on Electric-Field Sensor Line Array
Investigation on Z-Scan and its Application of Nonlinear Measurement
The PCB Surface Defect Detection System Based on GPU Acceleration
The Application and Study of CLIPS in Fault Diagnosis of Self-Propelled Gun Servo System
Application of Single Chip Microcomputer Technology in the Measurement of the Motion of the Rod Body
The Study of Relationship between Multivariate Capability Indices and Sampling Number
A Study on Liquid Level Measurement and Control System Based on Single Chip Microcomputer
The Comparison of Segmentation Results for High-Resolution Remote Sensing Image between eCognition and EDISON
Research on the Inspection and Mark on the Defects of Printed Matter Based on Template Matching Algorithm
Linearization of High Precision Human Body Temperature Measurement Circuit Based on NTC Thermistor
Research of Integrated Valve Plate Differential Pressure Leak Measuring Device
The Method Study of Laser Alignment Applied to Complete Zero-Line Detection of Artillery
An Optical-Triangulation-Based Method for Measurement of Blade Sections
Hair Detection in Mushroom Based on Image Processing
Study on Fast Calibration Model for Beam’s Space Position of Point-Structured Optical Probe
A Collision Detection Algorithm in Virtual Assembly Technology
An Edge Detection Method Based on Adaptive Differential Operator
Object Tracking System Based on Artificial Vision Algorithms
Deformation Measurement and Pointing Model Analysis of 25m Antenna
Research on Electronic Coin Recognition System Based on STC89C52
Comparative Analysis of Point to Point and Cascade Line Monitoring System
Intelligent Sensing System for Distribution Line Condition Monitoring
Study on Wavelet Packet Denoising Technique and its Application in Mechanical Fault Diagnosis
The Application of Finite Element Simulation on Sheet Plate Modal Acoustic Emission Testing
Design of Remote Fault Diagnosis System for Automobile Engine Based on Internet
Design on Intelligent Video Surveillance System Based on Target Identification Algorithm
Model Based Protocol Conformance Test Study
Application Research of Intelligent Monitoring System Based on Abnormal Events
The Modulation Index Optimization of Microwave Photonic Frequency Conversion Using Double-Sideband Suppressed-Carrier and Balance Detection
Effect Evaluation of Video Surveillance System on the Basis of Principal Component Analysis
Research on Monitoring System of Water Supply Pipe Network Based on GPRS Technology
Realization of an Execution System of Distributed Performance Testing Based on TTCN-3
Based on Wireless Sensor Network (NWK) of Non-Contact Tremor Monitoring Equipment Improvement for Parkinson's Disease
Ultra Surf Flow Detection Based on Statistical Classification
Comparison and Analysis on Environmental Function Matrix Computing in Separation of Guidance Instrument Systematic Errors
Ionosphere Delay Correction by Using Multifrequency Measuring Data
The Research of Embedded Remote Monitoring System Based on B/S Framework
In-Depth Research Information Differential Method of Measurement
Research on the Carrier Aggregation Application in the Blind Detection of PDCCH
Obtain the Solar Direction by the Skylight Polarization Degree Measurement
Mechanical Seal End Faces Friction Condition Monitoring Based on Particle Filter
The Research and Design of Monitoring System for Submarine Cables
Fault Diagnosis of New Certain Mine Sweeping Plough’s Electrical Control System Based on Data Fusion
An Indoor Multi-Function Environment Detector Model
Monitoring of Campylobacter jejuni Contamination in Different Links of Broiler Production Chain in Qingdao
An Efficient Two-Dimension BIST Compression Approach
An Active Search and Rescue Device in Ruin Interstice: SnakeRescuer
A Multisection Snake Like Manipulator with Rear Actuators: SnakeHelper
Design of Underwater Acoustic Vector Sensor and its Elastic Suspension Element
Aircraft Fuel Tank CATIA Model Pretreatment Method for Quality Property Calculation
Directional Search for Spiral Trajectory Extraction
Foot Pressure Intelligent Analysis System
The Application of Performance Degradation Analysis in Machine Tool Spindle
Early Cancer Locating Method Based on Infrared Functional Imaging
Finite Element Analysis of Circular Piezoelectric Resonator with Box Fixation
Research of Isokinetic Test on the Strength of Shoulder Joint of Elite Female Water Polo Athletes
Research on the Numerical Simulation of Internal Flow Field and Energy Efficiency of Ventilator
Application of the Laser Alloy Cladding on Re-Manufacturing of the Machine Tool Axis
Automobile Electrostatic Precipitator
Method of Effectiveness Analysis and Use of CT Image
Proposing a Hybrid Index that Combines between Meteorological and Topographic Parameters to Predict Forest Fires
Research on Knowledge Change Rate-Based Attribute Importance Measure Method
Manufacturing Process of Terahertz Radar Reflector Based on Ultra-Precision Machining Technology
Design and Research of Intelligent Warehouse Monitoring System of Multimedia Sensor Network
A Planar Capacitive Sensor Parameter Design for Security Detection
Research on Blasting Vibration Signal Denoising Based on Lifting Scheme
Parameter Estimation and Cramer-Rao Bound in Wideband Bistatic MIMO Radar System
The Research of Wearable Electronic Medical Devices
Research on the Realization of the Maximum Benefit of Thermal Power
Research on Ocean Wave Spectra Predicting Based on X-Band Radar System
Application of Wind Profiler Radar in Guided Missile Range Experiment
Maneuvering Target Tracking Based on Radar/ESM Sensors
Study on Capacitance Proximity Fuze Burst Height Dispersion
Research on Model of Airborne Radar Reconnaissance for Joint Campaign Level Wargame Based on EBI
Modeling the Near Infrared Light Propagation in Biological Tissues
Imaging Characteristics Analysis of GLV-Based Thermal CTP System
Research of Image Information Extraction Method Based on Structured Light
Comparative Study of ECG Based Identification
Character Analysis and Application of Resistance Sensor on Sizing Machine
Chapter 3: Mechatronics, Robotics, Automation and Control
Design of a Laser Navigation System for Substation Inspection Robot Based on Map Matching
Research on a Current Electric Bus Battery Swapping System Based on the Cartesian Coordinate Robot
A Study of Beer Fermentation Control System Based on the Technology of Computer Control
A Study on Speed Control System Based on STC89C51
A UAV Longitudinal Control System Design Based on QFT
Research of ADRC in Application to the Servo System of Self-Propelled Gun
Simulation of Fuzzy PID Control for a Large Containership Speed at Slow Steaming Condition
Fuzzy Tuning PID Control of the Rolling Mill Main Drive System
Analysis and Evaluation of Non-Singularity Workspace of Parallel Manipulator
The Implementation of Skyhook Control for Semi-Active Suspension Based on Vi-CarRealTime
Design and Simulation of the Hydraulic Synchronous Control System of the Upper Roller in Bending Machine
Research on Flux Damping Control Strategy of DFIG during Grid Voltage Dips
The Reliability Analysis of Mechanical Leg (2UPS+UP) Based on a Discrete Time Repairable Markov Model
Research of Control System of the Large-Scale Blow Molding Machine
PID+CMAC Neural Network Control of Micro Positioning Platform
Simulation of Motion Control for a Modular Robot of Five Degrees of Freedom
A Hybrid Differential Flatness and Sliding Modes Controller for Dynamical Structural Testing on Lower Limp Prostheses
Design and Implementation of Mechatronic Prosthesis for Amputees with Trans-Humeral Amputation
Mechanical Design of a Self-Balancing Platform for Transporting Purposes
Research on the Stiffness Modeling of the High Precision Positioning Platform under the Thermal Model
Evaluation of Dynamic Load-Carrying Capacity for Free-Floating Space Manipulators
Multi-Objective Trajectory Optimization of Free-Floating Space Manipulator Using NSGA-II
Introduce a Negative Pressure Wall-Climbing Robot with the ARM System
High Precision Synchronous Mechanical Motion Hydraulic Compensation Method
The Design and Simulation of AC Asynchronous Motor Direct Torque Control System
The Automatic Gain Control of the Digital Reconnaissance Receiver
Research on Architecture for Multi-UAV Systems Based on Autonomous Cooperation
Electro-Hydraulic Servo Loading System for the Pumping Unit
Adaptive Cruise Control System: Comparing LQ and MP Controllers
Workspace Analyzing for Hybrid Serial-Parallel Mechanism of a New Bionic Quadruped Robot
The Design of Indoor Intelligent Lighting Control System
The Design of Seeding Machine Based on the Motion Controller
Fuzzy PID Parameters Self-Tuning in the Application of the Furnace Temperature Control System
Fuzzy Self-Tuning PID Temperature Control Modeling and Simulation System
Research on Devices of Fault Setting and Eliminating for CNC Machine
Study on Electrical Control System of X62W Milling Machine Based on PLC
Velocity Optimal Control Algorithm Based on Hbrid Machine Tool
Modeling and Simulation of Kollmorgen Motor Movement Control System Based on SimScape
The Path Planning Control of a Mobile Robot Based on Fuzzy and Fuzzy Adaptive PID
Design and Fabrication of a Mobile Self-Reconfigurable Microrobot with Wall-Climbing Ability
Research on Control System of Large Capacity of Hollow Blow Molding Machine
Research on Strategy Intelligent Control of Traffic Signal
Diesel Engine Running at Constant Speed Base on Fuzzy Control Strategy
Design of a Temperature Control System Based on Generalized Predictive Control
Autonomous Car for Mining 1° ProtoType “ACM1PT”
Study on Control Model of Air-Conditioning System of Air-Conditioned Train in Qinghai-Tibet Railway
Applied of RBF Neural Network in Pressure and Flow Control System
Real-Time Traffic Signal Control Based on Kalman Filtering Theory
Grasping Optimization in a Three Fingers Final Effector
Chapter 4: Electronics and Microelectronics, Embedded and Integrated Systems, Communications, Power and Energy, Electric and Magnetic Systems
Research on Underwater Static Electric Field for Warship Based on Hybrid Model
Research on Micro-Grid Operation Control Strategy
Research on Intelligent Campus System Construction Based on RFID
Design and Thermal Analysis of SiGe HBT with Non-Uniform Segmented Emitter Fingers and Non-Uniform Emitter Finger Spacing
Design of a 10 Bit 2GHz Digital to Analog Converter Circuit
Distribution Automation Oriented Research on the Adaptability of the Communication Network Technologies
A Wavelet Based Directional Algorithm for UHVDC Line Protection
Comparison of Resource Scheduling Algorithms for LTE-Based Smart Grid Communications
The Identification Algorithm of Power System’s Bad Data Based on Improved K-Means
Comparison of Downlink Channel Estimation Schemes for LTE-Based Smart Grid Communications
Design of the Independent Rescue System Based on the Passive Sound Source Localization and Machine Vision
The Design of Signal Generator Based on FPGA High Resolution
Study on AC Artificially Pollution Flashover Performance of Long Porcelain Insulator String
The Embedded Video System Based on N32926 with RT-Thread
Real-Time Precise IOT Positioning System Based on Chirp Spread Spectrum Technology for Transportation
Design of Intelligent Wagon which Can Automatically Enter into Garage Based on STC89C52
Study on Personnel Positioning System of Ship Based on Zigbee Technology
Experimental Analysis of the Interaction Effect between Wave Power Platform Buoys of "Haiyuan 1" in Real Sea Conditions
Optimal Strategy of the Electricity Sale Distribution for Deterministic Generation in Long-Term and Real-Time Markets Based on Risk Factors
Development on Seismic Sensor System with MEMS Technology for Elevator’s Seismic Condition
Coding and Decoding Device Design of Three-Value Quantum Computer
PR Control of a Three-Phase Grid-Connected Inverter under Unbalanced Grid Voltages Condition
High-Voltage Large-Current 4H-SiC JBS Diodes
Steady-State Operation Analysis for a Three-Winding Single-Phase Capacitor Motor
Design of DDS Based on FPGA Technology
Fabrication and High Temperature Characterization of 1200V-15A 4H-SIC JBS Diode
Research on the Package of High Voltage SiC JBS
High-Speed Low-Power Bulk-Controlled Sense-Amplifier D Flip-Flop
Design of an Ultra-Wideband Wilkinson Power Divider in Modern Electronic Engineering
RTDS-Based Modeling and Simulation for Control System of HVDC
AGV Magnetic Sensor Data Acquisition System
Forest Fire Prevention Video Data Transmission System Design Based on Wireless Mesh Network
Application of Coded Modulation for Physical-Layer Network Coding
Design of 1.15MWp Distributed Photovoltaic Power Generation Scheme
Research and Analysis of Business Systems for County Grid
Suppression of High-Frequency Interference in Signal Loop
Research of Electric Energy-Saving Evaluation Analysis in Colleges and Universities
Distributed Cooperative Spectrum Sensing Algorithm Based on Average Consensus
Hardware Implementation Optimization of Extended Kalman Filter for the Estimation of State of Charge of Li-Ion Battery
Hoeffding Evolutionary Algorithm and its Application in Building Equivalent Circuit Models for Lithium-Ion Battery
Research on Overlapped Time Division Multiplexing in the Amplify-and-Forward Cooperative Mode
A Wind Power Prediction Method Based on RBF Neural Network
Impact of Large-Scale Wind Power Penetration on the Static Voltage Stability Based on the L Index
Study of Resource Allocation Method of Communication Network in Dense Crowded Area
Application of RFID in the Intelligent Traffic System
Performance Analysis of GPS/BDS Precise Point Positioning
Reliability Oriented Selective Triple Modular Redundancy for SRAM-Based FPGAs
The Research about Interference Location Based on Different Times of TDOA with Two Satellites
Coverage-Optimized Deployment Research for Maximizing the Sensor Network Coverage
The Performance of Double-Binary Turbo Codes in the HAP-Based Communication System
Study on Absorption and Utilization Technology of Renewable Electric Energy
Research on MUSIC Algorithm Based on Single-Antenna
Rapid Transfer Alignment Using Integrated Navigation System as Reference
The Power Delay Profile of the Single Antenna Full-Duplex Self-Interference Channel in Indoor Environments at 2.4 GHz
The Research of Assembling Computer Based on Augmented Reality
A VLC Based Vehicle Collision Avoidance Scheme for Intelligent Transport Systems
Study of Optimization of Microwave Cavity Filter Parameters Based on a Hybrid Algorithm of Trust Region
Generation of Frequency 12-Tupling Millimeter-Wave Using one DPMZM to Overcome Chromatic Dispersion
Symbol Timing Sequence Structure for OFDM-CDMA Communication System under Low SNR
Coal Mine Voltage Fluctuation Analysis and Control Strategy
Airborne Embedded Training System Architecture Design
A Modeling Method and I-V Characteristics for PV Array
Resource Allocation Scheme for Device-to-Device Communications Underlaying Cellular Networks to Maximize Overall Throughput
A Distributed Interference Alignment Algorithm for Device-to-Device Communications with Multiple Antennas Underlaying Cellular Networks
Reconditioning Equalizer Filter for Non-Constant Envelop Signals
The Ship Strong Electromagnetic Environment and its Improvement
Application of Four Quadrant Inverter for Mine Hoister
A Study of the Structure Optimization of Silicon-Based Solar Cells
DOA Estimation for Uniform Linear Array with Compressive Sensing
Optimization Model of the Cross Intersection Signal Timing Based on the Simulation
Analysis on Estimation of PM2.5 Emissions on Coal-Fired Generating Unit
Study on Bus Assignment Algorithm for SOC Test
Bisection Subspace Pursuit Algorithm for Compressive Sensing
Design of a Pulse Oximeter Based on STM32 Microcontroller
A Novel Tri-Band Ultra-Wideband Antenna with Deformed Split Ring Resonator for WLAN/WIMAX Applications
The Research of CIR Based on Communication Technology of GSM-R
An Improved Symbol Synchronization Method in OFDM Systems Based on Training Sequence
The Analysis and Simulation of Contact Loss between Pantograph and Catenary on Electric Railway
Programmable Logic Controller Program Design Method Research Based on PLC
Whole Process Management Research for Municipal Power Supply Enterprises’ other Expenses Based on Value Management
Design of Capacitor Step-Down Regulated Power Supply Based on Current Conduction Angle Adjustable Mode
An Asynchronous Multi-Channel MAC Protocol Based on Cooperation Mechanism in Vehicular AdHoc Network
Research and Analysis of Reliability of Power Grid SVG Master Circuit in Rural Areas
Research on Intensive SVG Integrated Power Unit Reliability Analysis
A Study on Operation Optimization of Chain SVG in Stabilized Voltage of Rural Power Grid 220kV Transformer Substation
Rapid Ambiguity Resolution for Single Frequency Receiver
A Semi-Blind Channel Estimation Method Based on Improved Particle Filtering for HF Channel
Design and Implementation of Multi-Master GPRS Transparent Transmission Module
A Study on Performance Test of the Self-Cooled System of High-Voltage SVC Valve Group
The Application and Development of IGCC Power Generation Technology in China
The Numerical Simulation Analysis of the Power Station Boiler Heating Surface Slagging
Micro-Grid Power Quality Management
Matpower Based Power Flow Calculation with Grid-Connected Photovoltaic
UHV AC and DC Coordinated Operation Techniques Based on Continuous Simulation
Dynamic Performance Analysis of Extended Range/Plug-In Electric Bus
Exergy Distribution Characters Analysis of a 130t/h Biomass-Fired Boiler
Mobile Maintenance Room of GIS Equipment at the Voltage Class of 220kV
Design of Electrostatic Focusing System for Space Electron Beam Gun
A Distribution Network Fault Location Method Based on Reverse Wave and Wavelet Analysis
High Precision GPS Clock Synchronization Method Based on Time Different Compensation
Research of Modeling Method of Transmission Line Information Based on IEC61850
Application and Development of MCGS Configuration Software in Wind/Solar Hybrid System
A Short-Term Distributed Load Forecasting Algorithm Based on Spark and IPPSO_LSSVM
A Backoff Algorithm for LOWPAN Based on the Dynamically Backoff Exponent
3-Dimensional Localization Algorithm Research Based on Weighted Fusion with Projected Coordinate
Harmonic Analyzing and Filtering of Motor Discrete Variable Frequency Soft Starter
A Simulation Study of Nakagami-m Distribution
Normalized p-Norm Blind Equalization Algorithm with Adaptive Momentum under Impulsive Noise Environment
Relay Selection Algorithms in D2D Cluster Underlaying Cellular Networks
Research and Simulation for Audio Stream Synchronization Algorithm of Multimedia Network
Research on Routing Algorithm Based on Ant Colony Optimization for Wireless Sensor Networks
Research on the Technology of Service Pricing Optimization Strategy for Mobile Communication Enterprise
Research on the Ultra-Short-Term Bus Load Forecasting Method Considering Meteorological Mutation
The Application of Fuzzy Comprehensive Evaluation in Meteorological Mutation Identification of Load Forecasting
Analytical Study on the Loss Reduction of Static Var Generator for Power Grid Based on the Soft Switch Technology
Ultra-Short-Term Forecasting Based on Phase Space Reconstruction and Wind Power Wind
Design of FPGA-Based Missile-Borne Image Acquisition and Storage Recorder
The Stochastic Resonance of Noise Frequency Modulation Signal Using Motion-Group Fourier Transform
UPT Chaos-Based Encryption Characteristic Analysis for Speech Signal
Analysis and Research of Mobile Station Location Based on NLOS Error
Study on Power-Train Configuration of Hybrid Electric Vehicle Equipped with Dual Clutch Transmission
Modeling and Simulation of Power-Split Hybrid System
Analysis and Application of Pure Electric Buses on the Economic Environment
Chapter 5: Numerical Methods, Computation Methods and Algorithms for Modeling, Simulation and Optimization, Data Mining and Data Processing
The Positive Integer Solutions of a Diophantine Equation
A Collaborative Traffic Optimization Strategy to Maximize Airline’s Net Income in Single-Aerodrome Terminal Airspace
A Composite Framework of Cuckoo Search and PSO Algorithm
A Firepower Assignment Method for Barragging the JDAM
A Method for Predicting Air Traffic Network Flow by Short-Term Probability
A New Algorithm for Solving TSP and its Applications
A New Classification Method Based on Similar Gravity
A Novel Classification Method of Fish Based on Multi-Feature Fusion
A Novel Modeling Method for C4ISR Effectiveness Requirements
A Particle Swarm Optimizer Based Approach for Aircraft Parking Position Assignment
A Personalized Recommendation Model Based on Contextual Information
A Predator-Prey Model Incorporating Prey Refuge and Allee Effect
A Review of the Hyperspectral Unmixing Methods that Based on Constrained NMF and Constrained Sparse Regression
A Stochastic Model with Saturation Infection for Internal HIV Dynamics
A Study of the Designing Rhythm Annotation Rules and the Time Parameter Extraction for Tibetan Speech
A Study on Selection of the Main Parameters of SVG
A Traffic Allocation Algorithm Base on Airline’s Profit Maximization in Multi-Aerodrome Terminal Airspace
A Traffic Prediction Method Based on the Hybrid Model of CLWT
An Extraction Method Based on Invariance Geometric Feature
An Improved Algorithm for Super-Resolution Video
An Improved Cloud Adaptive Genetic Algorithm Based on Cloud Computing for Active Optimization Calculation
An Improved DE Algorithm Based on the New Crossover Strategy
An Improved Mean Shift Segmentation Method of High-Resolution Remote Sensing Image Based on LBP and Canny Features
Analysis and Comparison of Image Enhancement Methods
Analysis of Ceramic Pattern Primitives Transform Operation
Analysis of KATL Operation Simulated by TAAM
Analysis of Sad Speech and Neutral-Sad Speech Conversion
Analytic Hierarchy Process Method Based on the Cask Theory
Application and Research on Distributed Collaborative Filtering Recommendation Algorithm Based on Hadoop
Application of Comprehensive Evaluation and Sensitive Analysis in Certain Equipment
Application of Legendre Polynomial in Predicting Total Energy Consumption
Application of MetaSynthesis in Complex System Simulation
Application of Moments in Qualitative Analysis on Borehole Trajectory Curving
Application of Rough Sets Theory in Graduate Enrollment
Architecture of Cloud-Based Crime Spatial Data Mining Platform
Attribute Reduction of Intuitionistic Fuzzy Concept Lattices
Automatic Generation of Design Scheme Based on Improved Segmentation Genetic Algorithm
Cleaning Uncertain Database with Aggregate Constraints Based on the Modified Simulated Annealing Algorithm
Collision Simulation to Road Safety Barrel Based on LS-DYNA
Crop Disease Leaf Image Segmentation Based on Genetic Algorithm and Maximum Entropy
Digital Audio Watermarking Based on QR Decomposition and Dither-Modulation Quantization
Drawing Hypergraphs in Hyperedge’s Average Degree and Multi-Rules
Electropalatographic Parameter Analysis of Single Consonant of Xiahe Tibetan Dialects
EL-SVDD: An Improved and Localized Multi-Class Classification Algorithm
Energy Minimization Model Based Target Tracking
Energy-Saving Scheduling Algorithm of Public Transport Bus Based on Passenger Flow Distribution in Different Time
Environmental Quality Assessment Based on a New Kind of Neural Network Using Rational Spline Weight Functions
Equivalence Class Based Parallel Algorithm for Mining MFI
Error Analysis of Neural Network with Multiply Neurons Using Rational Spline Weight Functions
Fast Inpainting Algorithm of Woodblock New Year Pictures Damaged Area Based on Combination of Texture Distribution Analysis and Anisotropic Diffusion Technique
Global Stability of an Age Structured SEIRS Epidemic Model with Screening
High-Rise Residential Complex Wind Aerodynamics Simulation
Improved Algorithm Based on Item Code and Rough Intensive Reduction Algorithm in the Application of Disease of Vegetable Leaf Image Mining
Improved Genetic Algorithm on Minimum Spanning Tree of Length Constraint Problem
Improved RSA Algorithm and Application in Digital Signature
Intelligent Optimization of Urban Real-Time Traffic Route Based on DNA Non-Dominated Sorting Genetic Algorithm
Literature Review on Hidden Markov Model-Based Sequential Data Clustering
Logistic Regression Analysis on the Survival Time for Patients with Lung Cancer
Logistics Route Optimization Based on Improved Fish Swarm Algorithm
MaxMining: A Novel Algorithm for Mining Maximal Frequent Itemset
Method for Selecting Storage Enterprises Based on IFHA
Modeling Method Based on Smooth Support Vector Regression with Independent Component Analysis Feature Extraction
Multi-Objective Optimization of Freeway Network Traffic Flow Using Particle Swarm Optimization
Numerical Simulation of Fluid-Structure Interaction Relations between Skull and Brain Based on ALE and Overlapping Mesh Methods
Numerical Simulation of Particle Separation in a Hydrocyclone
Numerical Simulation of the Fixed Assets
Numerical Simulation on Pressure Field Characteristics of Underwater Explosion with Double Explosive Sources
On Point Estimations of some Uniform Distributions
Orange Feature Extraction and Description Based on Image Processing
Outlier Detection Clustering Algorithm Based on Density
Population Analysis Based on Neural Network of Rational Spline Weight Functions with Cubic Numerator and Quadratic Denominator
Recursive Particle Swarm Optimization Application for the Radial Basis Function Networks Modeling System
Research of Orange Quality Classification Technology Based on BP Neural Network Algorithm
Research of Topology Optimization of Nodal Density Based on Bilinear Interpolation
Research on Automatic Text Classification Algorithm Based on ITF-IDF and KNN
Research on Bifurcation of Asymmetric System Based on Second-Order Averaging Method
Research on Data Mining in the Information Network Application
Research on Digital Watermarking Algorithm Based on Discrete Wavelet Transform and Singular Value Decomposition
Research on Gesture Speed Estimation Model in 3D Interactive Interface
Research on Matching Pair Purification Methods of Image Based on SIFT Algorithm
Research on Nonlinear Approximation Model of Radial Basis Function Neural Network Trained Using Artificial Fish Swarm Algorithm with Adaptive Adjustment
Research on Polarization Image Fusion Using Tetrolet Transform
Research on Privacy Preserving Classification Algorithm
Research on Scheduling Model in Dynamic Environment Based on Computational Economy
Research on the Color Mixingand Embedding of Infrared Detectable Watermark Studies
Research on the Confidence Regression Based on KNN Algorithm
Research on the Era Environment of Data Mining
Research on the Image Based on the Visual Sensory Apply to the Layout Design
Research on the Validation Method of Advanced Driving Simulators Based on the Speed Perception Model
Sediment Yield Simulation Using SWAT Model for Water Environmental Protection in an Agricultural Watershed
Seeking Primary Functions of Complete Differential with Six Variables
Shadow Removal Based on Multi-Feature Fusion of Multiple Moving Objects Scene
Short-Term Forecast of Blast Furnace Gas Production Amount Based on Grey RBF Neural Network
Simulation and Prediction of Excellent Students Based on System Dynamics
Sleep Sensor Temperature Prediction Based on Neural Network Training Algorithm with Rational Spline Weight Functions
Sorting Algorithm for Uniform-Distributed Data
Spatial Resolution Enhancement for Hyperspectral Image Using Gaussian Scale Mixtures
Stereo Matching Algorithm Based on Belief Propagation System
Study of the Cluster Analysis Algorithm for Radio Advertising
Study on Prediction Model of Grain Yield Based on Principal Component Analysis and BP Neural Network
Study on the Differences in Grain Production Capacity of the Region in Jilin Province Based on Cluster Analysis
The Agriculture Vision Image Segmentation Algorithm Based on Improved Quantum-Behaved Particle Swarm Optimization
The Analysis and Evaluation of Differentiated Transit Fare Structures
The Application of Time Series Analysis Model in the Prediction of Rice Blast
The Bus Data Model, the Principle and Algorithm Implementation of Query System
The Feasible Coalitional Structures in the Weighted Cooperative Games
The Limit is Calculated by Using the Main Part of the Function
The Method Research on Data Mining of Concept Lattice
The Rank Test of Various Treatment Effects
The Reasonable Length Study of Fishing Quay by Flexible Berthing
The Research on the Corpus-Based Machine Translation System
The Selection and Evaluation of Manufacturing Partner Based on AHP-FUZZY and Genetic Algorithm
The Study on Fire Evolution Characteristics in Multi-Room Environment
The Traffic Accident Scene Drawing System Based on Image Trapezoid Distortion Correction
The Traffic Flow Model of Intelligent Transportation System
Theory and Algorithms Research on New Concept Lattice Generated Based on Detrimental of Old Concept Lattice
Trappy Alpha-Beta with Two-Ply Iterative Deepening
Two Conversion Formulas of Known Optimal Sequences
Two Methods for the Expectation in Envelopes Pairing Problem
Two-Tuple Linguistic Information in Group Decision-Making Problem
Uncertain Internet Public Opinion Emergency Decision-Making Method under Interval-Valued Fuzzy Environment
Using the Shapley Value to Determine the Expert’s Discourse Right in Group Decision-Making
Virtual Combat System Evolution Model Realization
Weapon Target Assignment Problem Solving Based on Hungarian Algorithm
Parallelization and Locality Optimization Based the Polyhedral Model
Application of Intelligent Optimization Algorithm in Mechanical Design
Tracking Algorithm Design and Comparison of High Speed High Maneuvering Target
Multi-Information Model Fused Framework for Chinese Dialect Identification
A Prototype Selection Method for Synthetic Object Recognition Based on Structural Graph Model
A Parallel Test Task Scheduling of Integrated Avionics System Based on the Ant Colony Algorithm
Image Color Recognition System Based on Labview
A Remote Sensing Ship Recognition Method Based on Co-Training Model
Research on Network Intrusion Detection Based on Data Mining Technology
Numerical Simulations of Elliptical Hollow Gaussian Beams Propagating in Strongly Nonlocal Media
Study of Driver’s Reaction Time (DRT) during Car Following
Calibration of Saturation Flow for Signalized Intersections
A Novel Hurst Method to Determine Gas Eruption Period
A Real-Time Image Processing Method for Multi-Beam Forward-Looking Sonar of AUV
Approach for Negotiation Problems in Multi-Agent Systems for DC Micro Grid Using Multi-Objective Evolutionary Algorithms
The Modeling and Simulation Calculation of Anti-Submarine Patrol Magnetic Finder Inspection and Search
Nonparametric Survival Analysis of Non-Motor Vehicles Violation in Signal Intersection
Adjusting Methods of the Off-Axis Parabolic Mirror in Terahertz Time Domain System
A Smart Home System Based on Speech Recognition Technology
Investigation of Sinkage and Trim by Ships in Shallow Water Based on Overset Grid
Knowledge Discovery in Incomplete Medical Data Using Flow-Graph Networks
Research on the Credibility Evaluation Methods of Combat Simulation
Shadow Rendering Technology in the Application of Virtual Simulation System
Study of DEM Information Security in Geographic Information Service
Human Action Recognition Based on Improved MIL
A Gesture Recognition Algorithm Using Hausdorff-Like Distance Template Matching Based on the Main Direction of Gesture
Research on Face Recognition Technology of Real-Time Video High Performance Similarity
A Comparative Study of Visual Salient Features Affect Object Recognition
Application of SOM Neural Network in Lithology Recognition
2D Bar Code Detection, Recognition and Application Research Based on NI VISION
Improvement and Kernelization of T-2DPCA with Application to Face Recognition
The Poultry Meat Production Technical Efficiency Analysis Model Based on Intelligent Devices
Visual Attention Distribution and its Application in the Gesture Interaction System
Chapter 6: Information Technologies, WEB and Networks Engineering, Information Security, Software Application and Development
Research on Computer Graphics Design and Visual Communication Design
A Discovery Technology Based on Distributed Resource Management Domain
A Multipath Routing Protocol Based on the Quality of Service Aware
A New Web Application Framework Based on SSH
A Research on New Type of P2P Based Botnet
Abnormal File Access Behavior Detection Based on FPD: An Unsupervised Approach
ADO.NET Database Access Technology
Combine Trust Management Scheme for BitTorrent Networks
Correlation Analysis of Software Defects Density and Metrics
Design and Implementation of Information Push Service Platform in Mobile Intelligent District Based on JXTA
Design and Implementation on Digital Media Resource Management System Based on SOA
Design in Fire Prevention Based on Multi-Sensor and WSN
Design of Reconfigurable Computer Software Platform
Framework Structure on Enterprise Office Automation System
Heterogeneous QoS Provision Schemes over WLANs with the Equivalent Spectral Bandwidth Distribution
Linking Multiple Identities in Online Social Networks Based on Co-Occurrence Analysis
Modeling Internet Backbone Traffic Based on Multi-Commodity Flow
Multipath Inter-Domain Routing Decision Verification Protocol
Network Size Impact upon Global Balance Structure in Small Complete Network
Network Status Feedback and Implementation of Mobile Internet Based on Cloud Computing
Passenger Flow Analysis in Subway Using a Kind of Neural Network
Personalized Recommendation Based on Trust and Preference
Reliability Assessment of Digital Protection Software under the Software Module Structure
Research and Improvement of LEACH Routing Protocol
Research of Equipment Precise Support System Based on Internet of Things
Research of the Key Technologies of the Smart Home Based on IOT
Research of the Network Routing Optimization Based on AODV
Research of Web-Page Multi-Class Classification System Based on Support Vector Machine
Research on Aircrafts’ Ammunition Management System Based on Data Warehouse
Research on Cloud Servicer Dynamically Select Models in Music VoD Hybrid Network Environment
Research on MCL for Mobile Underground Miner Location System Based on ZigBee
Research on Relational Database and NoSQL Based on XML Data
Review of Computer Aided Product Innovation Design Based on Knowledge
Software Development Model Design of Mobile Internet Client
Study of Virtual Scene Interaction Based on VRML and 3DS Max
Study on Closed-Loop Quality of Aircraft Maintenance
Study on Mechanical Processing Workshop Production Information and Management System
The Application Research of ERP in Enterprise Information Management
The Brief Analysis of Solutions to Automated Network Equipment Security Configuration Baseline Verification
The Construction of the Knowledge Management System in the Cloud Computing Environment
The Demand Analysis and Overall Design of Outpatient Registration Platform Based on Information Processing Technology
The Design of Interactive Multimedia System for Wireless Environment
The Multi-Server Load Balancing Systems Research in Large-Website Construction
The Research of Developing Virtual Jewelry Worn System Based on ARToolkit
The Terminal Design of Archives Temperature and Humidity Based on WIA Wireless Networks
Tool to Perform Software-in-the-Loop through Robot Operating System
Virtual Package Design and Realization Based on 3D Visualization Technology
Research on the Value-Passing Method between Pages under ASP.NET MVC Mode
The Establishment of Information Management Security under Cloud Computing Environment
A Film Retrieval Method Based on Ontology
A Genetic Algorithm for Flow Scheduling in Data Center Networks
A Storage Model of Equipment Data Based on HBase
A Universal Storage Architecture for Heterogeneous Data of Internet of Things
An Algorithm to Improve MAODV Multicast Routing in MANET
Application of Improved Ant Colony Algorithm in the Network Cloud Data Clustering and Intrusion Detection
Cloud Storage Virtualization Technology and its Architecture
Dynamics of Behavior Spreading Driven by Opinion Evolution: Modeling and Simulation
Efficient Data Mining Model Design for a Large Database in the Cloud Computing Environment
MCACM: A Cloud Storage Access Control Model for Multi-Clouds Environment Based on XACML
Network Congestion Control Algorithm Simulation Research Based on NS2
Privacy Protection in the Internet of Things Based on Cryptography
Research on Technology of Energy Consumption Optimization in Cloud Computing Platform
Research on the Improvement of RED Algorithm in Network Congestion Control
Self-Adaptive Particle Swarm Mutation Rate of Genetic Algorithm in the Link Optimization of Network Coding
Study on Group Differences of Online Shopping Based on Data Mining
Study on Trust Model of Internetware System
The Data Mining Application Research and Resolution Based on Network Information Retrieval
The Design and Implementation of Prototype System for Choreography and Rehearsed Based on Virtual Simulation Technology
Study on Intrusion Detection System Based on Data Mining
Identifying Large Flows Based on SDBF Algorithm in High Speed Network Measurement
Intrusion Detection Technique Based on Improved Intuitionistic Fuzzy Neural Networks
The Method Creating UML Model about Heat Pipe Network Data
Technique for Denial-of-Service Intrusion Detection Using Non-Subsampled Shearlet Transform
Technique for Intrusion Detection Based on NSST Domain Artificial Neural Networks
Design and Applications of Public Construction Energy Consumption Supervision System
Value Mining of Product Reviews Based on Sentiment Analysis
An Improved Task and Role-Based Access Control Model with Multi-Constraint
A Novel Design Method for Filter/Guidance Simulation System
Technology on Computer Remote Control and Hiding Method
Design of Music Player Based on Android Platform
Research on the Function and Application of Data Structure
Research on Collaborative Design Practice of REVIT Based on BIM
Reverse Engineering and 3D Printing Technology's Application in Sculpture and the Restoration
Analysis on the Development of 3D Printer
Chapter 7: Materials Engineering, Chemical Engineering and Materials Processing Technologies
The Advanced Technologies on Digital Characterization of Reservoir Microscopic Pore Structure
A New Method of Preparation of Photo-Thermal Conversion of Ceramifiable Coatings
A Photo-Curing Method to Prepare Biomimetic Micro-Nano Structure of Butterfly Wing Scale
Adsorption Effect of Iron-Aluminum Binary Oxide on Copper Ions
AFM Study of Magnetron Sputtered Nickel Films Coated on Cenosphere Particles
Application of New Inhibitor on Separating Copper-Molybdenum Ore from Jinping
Application of Self-Adaption Camouflage Materials in the Entrance of Command Protection Engineering
Boundary Lubrication Mechanisms of Molybdenum Film by MoDTC and ZDDP Additives
Carbon Nanotubes Non-Covalent Modified by Ionic Liquid Surfactant and its Optical Limiting Properties
Characteristic Study on Parylene-C Film for Thermal Isolation on Chip
Chemical Composition and Antimicrobial Activity of Marsdenia Koi Tsiang Essential Oil
Comprehensive Strengthening of Microalloyed Pure Gold
Controlled Rolling and Cooling Process of Spring Steel 65Mn
Decomposition of Fertilizer Use Intensity over 2004-2011 in China
Degradation Behavior of Pure Polystyrene Subjected to Two Natural Climate Types and the Simulated Effect of Artificial Accelerated Weathering
Design Method and Study on Water Stability of Warm Mixing Regeneration Mixture Based on Interface Effect
Design of Formulation and Performance Research of Water-Borne Epoxy Modefied by 3-(trimethoxysilyl)propyl Methacrylate Anti-Corrosion Coatings
Discussion on Application of Biotic Ligand Model - The Tool to Predict Bioavailability of Metals
Effect of Different Annealing Process for Microstructure and Properties of 1200MPa HSLA Steel
Effect of Glycerol Carbonate as Plasticizer on P(AN-MMA) Polymer Electrolyte
Effect of Holding Time on Rheological Characteristics of the Semisolid Magnesium Alloy
Effect of Preparation Conditions on Evaluation of Porous Silicon’s Morphology and Coalition with its Optical Property
Effect of Rejuvenator on Porous Asphalt Mixtures Containing Reclaimed Asphalt Pavement (RAP) Material
Effect of Sulfur Dioxide Treatment on Storage Quality of Red Grape
Effects of Coagulation-Bath Temperature on the Formation Process of PVDF-g-PNIPAAm/poly(NIPAAm-co-AAc-L-Phe) Membrane
Effects of Soldering Temperature on IMCs Formation between Sn-0.7Cu Solder and Cu Substrate
Electrochemical Test Research on Corrosion Resistance of Cable Wires with Different Protection Layers
Engineering the Topological Phase of Half Heusler Compounds by Computer
Etched Stainless Steel Powder as Novel Sorbent Material for Solid-Phase Extraction Coupled with High-Performance Liquid Chromatography for Determination of Polycyclic Aromatic Hydrocarbons in Water
Experimental Research on the Treatment of Printing and Dyeing Wastewater Using Ultrasound Combined with Fenton Reagent
Fabrication and Characterization of Sisal Cellulose Nanowhiskers
Indirect Determination of Acetylcysteine in Pharmaceutical Sample by Discoloration Spectrophotometry Using Fe(III)-Tiron System
Influence of Different Temperature on Product Distribution Law of Waste Oil Steam Cracking
Influence of Unavoidable Ions on Fine Cassiterite Gravity Separation
Influence of the Coagulation-Bath Temperature on Membrane Formation Mechanism and Properties of PVDF/TA-ATP Hybrid Membrane
Innovative Uses of Materials for a Nasogastric Tube Stabiliser Incorporating the TRIZ Method
Investigation on the Electronic Structure and Optical Properties of ZnO Nanofilms
Izod Impact Strength of Acrylonitrile Butadiene Styrene (ABS) Matetials after Used in UP2! 3D-Printer
Laboratory Study of a Polymer/Surfactant Fracturing Fluid
Large-Scale Experimental Investigation of the Fire Characteristics Parameters of Methanol in Coal Chemical Industry
Localised Corrosion Damage Based Fatigue Crack Extension Model of Aluminium Alloy with Prior Corrosion Damage
Mechanism of DBDS and Irgamet 39 on the Corrosion and Suppression of Copper in Transformers
Microstructural Evolution and Mechanical Properties of Pure Magnesium during Multi-Axial Compression
Mix Design and Performance Research on Asphalt Mixture of SUP-20 with Lucobit
Numerical Study of Residual Stresses Induced by High Speed Milling Hardened SKD11 Steel
Optimization of Ultrasonic Extraction of Flavonoids from Castanea mollissima Blume Shell
Phosphorus and Iron Distribution in the Sediments of the Yellow River
Photocatalytic Degradation of Methyl Orange by TiO2/Schorl Photocatalyst: Affecting Parameters
Photocatalytic Degradation of Methyl Orange by TiO2/Schorl Photocatalyst: Kinetics and Thermodynamics
Preparation and Application of a Novel Formaldehyde-Free Fixing Agent
Preparation and Curing Behavior of Silicone-Modified Phenolic Resin
Preparation and Characterization of Activated Carbon/Viscose Fiber
Production of Electricity during Wastewater Treatment Using Fluidized Bed Microbial Fuel Cells
Property Analysis for Microwave Absorbing Material Based on Effective Medium Model
Removal of Cu (II) Ions by a Novel Starch-Based Adsorbent from Aqueous Solution
Research of Geosynthetics in Seepage Prevention of Rock-Fill Dam
Research on Mass Transfer Process of AMD Corrosion Reaction and Model of Deposition Calculation for Acid
