E-Book, Englisch, 748 Seiten
Silva Bartolo / Artur Jorge / Alves Innovative Developments in Design and Manufacturing
Erscheinungsjahr 2009
ISBN: 978-1-135-16612-0
Verlag: Taylor & Francis
Format: EPUB
Kopierschutz: 0 - No protection
Advanced Research in Virtual and Rapid Prototyping -- Proceedings of VRP4, Oct. 2009, Leiria, Portugal
E-Book, Englisch, 748 Seiten
ISBN: 978-1-135-16612-0
Verlag: Taylor & Francis
Format: EPUB
Kopierschutz: 0 - No protection
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Invited lectures
New challenges for Reverse Engineering in facial treatments: how canthe new 3-D non invasive surface measurements support diagnosis and treatment?, L.M. Galantucci
1. Biomanufacturing
Scaffold Micro-Architecture Optimization Based on Bio-Mimetic Principles, A.B. Bucklen, B.M. Wettergreen & C.M. Liebschner
A minibioreactor for developing "perfused" capillaries in cardiomyocyte aggregates, C.K. Chua, D. Liu, F. Leong, V. Mironov & V. Kasyanov
Spinning of biomaterial microfibers for tendon tissue engineering, C.K. Chua, J. An, K.F. Leong, C.M. Cheah & H. Chang
Stereolithographic Rendering of Low Molecular Weight Polymer Scaffolds for Bone Tissue Engineering, D. Dean, J. Wallace, K. Kim, A.G. Mikos & J.P. Fisher
Process flow for designing functionally graded tissue engineering scaffolds,.K. Chua, N. Sudarmadji, K.F. Leong, S.M. Chou, S.C. Lim & W.M. Firdaus
Indirect fabrication of tissue engineering scaffolds using rapid prototyping and a foaming process, J.Y. Tan, C.K. Chua & K.F. Leong
Fractal Tool Paths for Layered Manufacturing of Scaffolds with Matched Bone Properties, G.S. Kumar & P. Pandithevan
BioExtruder: Study of the influence of process parameters on PCL scaffolds properties, M. Domingos, F. Chiellini, A. Gloria, L. Ambrosio, P. Bartolo & E. Chiellini
The use of Periodic Minimal Surfaces for Scaffolds design, H.A. Almeida & P.J. Bártolo
Intelligent biopolymer selection system for medical applications, C.S. Moura, P.J. Bártolo & H.A. Almeida
2. CAD and 3D data acquisition technologies
Rapid Prototyping models of foetuses built from Ultrasound 3D and Magnetic Resonance files, J.R.L. Santos, J.R.L. Santos, R.C. Fontes, S. Campbell & H. Werner
A Computer Aided Design (CAD) support tool for parametric design of products for Rapid Manufacture (RM), P.C. Smith & A.E.W. Rennie
Comparison of CT and CBCT for Fabrication of Dentistry Models via Rapid Prototyping Technology, H. Kheirollahi, F. Abesi & S. Rahmati
Global approach to design and manufacture Direct Parts, J.Kernion, P.Mognol & J.Y.Hascoët
Novel Methodology in Design of Custom-made Hip Prosthesis, F. Abbaszadeh, S. Rahmati, F. Farahmand & R. Fatollahzadeh
Use of BioCAD in the Development of a Growth Compliant Prosthetic Device for Cranioplasty of Growing Patients, D.T. Kemmoku, P.Y. Noritomi, F.G. Roland & J.V.L. da Silva
Artificial teeth manufacturing: inspection of mould and teeth by contactless scanning systems, E. Atzeni, L. Iuliano, P. Minetola, A. Salmi & A. Gatto
Guided dental surgery based on integrating 3D image slicing and structured light scanning, S. Barone, A. Paol & A. V. Razionale
A robotic system for 3D optical scanning of large surfaces, M. Maggini, S. Barone, A. Paoli & A.V. Razionale
A simple photogrammetric system for automatic capture and measurement of facial soft tissues during movement, L. M. Galantucci, F. Lavecchia & G. Percolo
3D digitation of museum sculptures for model-making purposes: difficulties and possible solutions, G. Celani, L. Cancherini, A. Jardini, M. Oliveira, J.V.L. da Silva & V. Piccoli
The use of technologies as Rapid Prototyping and Scanner Inspection in surgical planning to medical application, C.B.L. Ulbrich, H.A. Hermini & C.A.C. Zavaglia
Performance evaluation of non contact measuring systems considering bias, M. Cavallaro, G. Moroni & S. Petrò
A surgical training model manufacture using rapid prototyping technology, L. Queijo, J. Rocha, L. Barreira, T. Barbosa, P.M. Pereira & M.S. Juan
Image based modeling and morphological analysis of the human knee, G. Renner & L. Hajder
Design of customised bioceramic medical implants by layered manufacturing, S. F. Khan & K.W. Dalgarno
Reverse Innovative Design in Rapid Modelling and Reverse Engineering Industrial Applications, A.E. Sonn & D.M. Dimitrov
3D-Digitalization of ankle movement and 3D-CAD-method for patient specific external ankle support development and Rapid Manufacturing, R. Björkstrand, J. Tuomi, M. Paloheimo, J. Lindahl & J. Salo
3. Materials
Experimental Investigation of Charpy Impact Test on Metallic SLM parts, E. Yasa, J Deckers, J.P. Kruth, M. Rombouts & J. Luyten
Series production of CE-certified orthopaedic implants with integrated network structures for improved bone ingrowth, P. Cremascoli & P. Ohldin
Densification and coarsening of lase sintered green parts by microwave technique, P. Veronesi, A. Gatto & L. Iuliano
Functionally graded PA12/MWCNTs composite fabricated by SLS to aerospace applications: mechanical and electrical behaviour, R.A. Paggi, G.V. Salmoria, A. Lago & V.E. Beal
Rapid Manufacturing of Polycaprolactone / Progesterone Drug Delivery Device by SLS, G.V. Salmoria, P. Klauss, R.A. Paggi, M. Souza, L.A. Kanis & K.M. Zepon
Selective Laser Melting of NiTi shape memory components, H. Meier, C. Haberland, J. Frenzel & R. Zarnetta
Laminated Object Manufacturing (LOM) of Glass Ceramics Substrates for LTCC Applications, C.M. Gomes, N. Travitzky, P. Greil, A. P.N. Oliveira & D. Hotza
Extrusion Behavior of Chocolate for Additive Layer Manufacturing, L. Hao, O. Seaman, S. Mellor, J. Henderson, N. Sewell & M. Sloan
Production of fully ferrous components using Indirect Selective Laser Sintering, P. Vallabhajosyula & D.L.Bourell
On Mechanical Properties of SFF-made Calcium Polyphosphate Bio-Structures, Y. Shanjani & E. Toyserkani
On the effects of build orientation in powder-fed Additive Layer Manufacture of steel 316L, E. Bassoli, A. Gatto, N.T. Sewell & D. Johns
Multiphase numerical modeling of metallic particle composites, C. Capela, J. Bolrão, F.V. Antunes & P. Camaño
Study of materials applied to an orthopaedic external circular fixator, C. Capela, L. Oliveira, P. Camaño, P.Bártolo& I. Garcia
4. Rapid tooling and manufacturing
Direct Rapid Tooling for Die Forging – a new challenge for Layer-Based Technologies, R. Neugebauer, B. Mueller & A. Wagner
An automated method for RM feasibility evaluation, J. Munguía & F. Fenollosa
Layer Laminating Increases the Cost Effectiveness of Custom and Standard Last Manufacturing in the Footwear Industry, U. Klaeger
Embedding Of Electronic And System In Package Using Generative Processes, F. Ansorge, K. Heumann, D. Ifland, H. Reichl
The influence of the mould material on the rheology and mechanical characteristics of hybrid injection moulds, L. Cardon, A. Dekeyser, M. Moerman, S. Vernaillen & K. Ragaert
Design for Rapid Manufacturing - Capturing Designers’ Knowledge, S. Maidin and R.I. Campbell, I. Drstvensek & P. Sever
Direct Fabrication of an in-situ Al Composite using Selective Laser Melting Process, S. Dadbakhsh, L. Hao, N. Sewell, P. Jerrard
Warpage of injection mouldings in hybrid moulds with epoxy-aluminium composite core, M.A. Silva, P.G. Martinho & A.S. Pousada
Rapid Manufacturing in Automation Applications, Ralf Becker & Andrzej Grzesiak
Digital design and rapid manufacturing in orbital wall reconstruction, M. Salmi, J. Tuomi, K.Paloheimo, M. Paloheimo, R. Björkstrand, A.A. Mäkitie, K. Mesimäki & R. Kontio
Direct Manufacturing of dense parts from martensitic precipitation hardening steel gas atomized powder by selective laser melting (SLM) technology, M. Averyanova & Ph. Bertrand
Studying the repeatability in DMLS technology using a complete geometry test part, J. Delgado, J. Ciurana, C. Reguant & B. Cavallini
Cooling channel configuration in Injection Moulds, D. Dimitrov, A. Moammer & T. Harms
5. Advanced rapid prototyping technologies and nanofabrication
A Practical Approach on Temperature Variation in Selective Laser Melting with a Novel Heat Transfer Model, C.K. Chua, A. Liu & K.F. Leong
Study and simulation of different scanning strategies in SLM, J. Jhabvala, E. Boillat, T. Antignac & R. Glardon
Interface Attachibilty Analysis of Printed Patterns through Electrostatic Inkjet System, A.Ali, A. Rahman, K.H. Choi, B.S. Yang & D.S.Kim
The Development of a Generic Rapid Prototyping Process Planning System, N. Volpato & J.A. Foggiatto
Hibrid Organic-Inorganic Nanocomposite for Infrared Laser Stereolithography Process, M.I.R. Barbosa, A.L. Jardini, M.C.B. Costa, R.A. Rezende & R. Maciel Filho
The future of electronic products: conductive 3D Printing?, O. Diegel, S. Singamneni, B. Huang & I. Gibson
Challenges and Opportunities in obtaining Rapid Ceramic Components by means of Subtractive Methods applied to Non Sintered Materials, J.R. Gomà-Ayats, J. Minguella-Canela & R. Uceda-Molera
New Generation of Rapid Manufacturing Equipment, O. Hangaard
A three dimensional FE-model for the investigation of transient physical effects in Selective Laser Melting, M.F. Zaeh, G. Branner & T.A. Krol
A benchmark for accuracy evaluation of dental crowns up-to-date manufacturing, E. Atzeni, L. Iuliano, P. Minetola, A. Salmi & A. Gatto
Design of a micro-channel reactor for decomposition of organic pollutants in waste water treatment, G. Charles, S. Corbel, M-C. Carré, T. Roques-Carmes, O. Zahraa
Internal structure Optimization for Fused Deposition Modeling ABS Parts, L.M. Galantucci, F. Lavecchia, G. Percoco
Simulation based Multi-Objective Optimisation Model for the SLS Process, A.K. Singh & R.S. Prakash
Multi-objective optimization of part orientation to improve process planning in RM, S. Danjou & P. Köhler
The production of Ti-6Al-4V parts with controlled porous architecture by three-dimensional fiber deposition, M. Rombouts, S. Mullens, J. Luyten, P. Nuyts & M. Schroeven
3D Microstructuring of Hybrid Organic-inorganic Materials by Two-Photon Polymerization Technique, A.Ovsianikov, Boris Chichkov, M. Oubaha, R. Copperwhite, B.D. MacCraith, A Gaidukeviciute, I. Sakellari, A. Giakoumaki, D. Gray, M. Vamvakaki, M. Farsari, & C. Fotakis
Buid Time Estimator for Adaptive Slicing in Stereolithography, A.Sanati Nezhad, M. Vatani, F. Barazandeh & A.R. Rahimi
Construction and Adaptation of na Open Source Rapid Prototyping Machine for Biomedical Research Purposes – a Multinational Collaborative Development, A.L. Lixandrão Filho, P.Y. Noritomi, J.V.L da Silva, P. Inforçatti Neto, P.Y.C. Cheung, N. Colangelo, H. Kang, J.T. Buthcer & E. Malone
Micro laser-milling of graphite: analysis of process parameters, J. Monteiro, P.J. Bártolo & C. Capela
6. Virtual environments and simulation
Towards ontology-based information extraction in distributed manufacturing systems, B.X. Li, L. Yang, S.K. Ong, Y. Lei & A.Y.C. Nee
A Virtual Manufacturing System of Screw Threads Generation with Tasks Schedule Approach, J.S. Liang
An Interactive Multimedia Approach to Enhance Learning of Rapid Prototyping, C.K. Chua, T.T. Vu, K.F. Leong & C.S. Lim
Products experience: how can Virtual Prototyping improve usability testing?, M. Mengoni, M. Germani & M. Peruzzini
Efficient use of Traditional-, Rapid- and Virtual Prototyping in the industrial product development process, R. Bastiens, J. Detand, O. Rysman & T. Defloo
Using an immersive virtual environment to validate cellular manufacturing system simulation models, H.J.R Carvalho, C. Oliveira, H.C. Vale, D.C. Sena & A.J.V. Porto
Analysis and Fabrication of New Designed Dental Implant using Rapid Prototyping Technology, S. Rahmati, H. Kheirollahi & A. Azari
A model for project-based environmental compliance management for small and medium enterprises, E.C.K. Chan & K.M. Yu
New perspectives on form: real-time, virtual modeling in networked 3d environments, S.B. Fraser, M. Lyons, T.J. Miller, M. Barnard,H.K. Henning, J. Looser, H. Seichter & M. Billinghurst
Adaptive Logistics: Simulation based decision making in assembly planning and –control, A.Kampker, G. Schuh, B. Franzkoch, T. Potente & T. Welter
Breaking paradigms – The teaching of RM to "experienced newcomers", J.Munguía & M. Villegas
Design-by-the-Customer through Virtual Reality, A.G. Bachvarov, S. Maleshkov, P. Stojanova & J. Katicic
Context information complemented virtual prototyping of factories, A.Kampker, G. Schuh, A. Hoeschen & J. Nöcker
Form follows algorithm: Computer derived design for rapid manufacturing, S. Killi
Concurrent design and development of a chassis set for an electromechanical transmission system, F. Fenollosa-Artés, J. Minguella-Canela & J. R. Gomà-Ayats
A Multi-agent Based Dynamic Scheduling Framework for Virtual Enterprises, S.H. Niu, S.K. Ong & A.Y.C. Nee
Integration of Rapid Manufacturing processes in a high-level numerical chain, R. Bonnard, P. Mognol & J.Y. Hascoët
A holistic approach for customer-oriented product engineering of micro devices, K. Hahn, T. Schmidt, R. Brück, D. Ortloff & J. Popp
Fully GPU-based volume representation and material removal simulation of free-form objects, B. Tukora & T. Szalay
Low-cost gesture detection as a form of interaction in a virtual reality multi-projection system, C. Oliveira, D.C. Sena, H.M.C. Vale, H.J.R. Carvalho & A.J.V. Porto
Construction of Immersive Multi-projection Environments for Treatment of Phobia of Heights, H.M.C Vale, C. Oliveira, D.C. Sena & A.J.V. Porto
Virtual Reality for Assembly Simulation and Ergonomic Analysis in automotive chain of production, M. Cavallaro & G. Moroni
Biomechanical response simulation of tetrahedral mass-spring model of intervertebral disc in a spine segment with haptic interface, K.T. Huynh, I. Gibson & W.F. Lu
An approach to develop a rapid manufacturing knowledge-based environment, Tahar Laoui
"3D Faxing": Rapid prototyping of new product and process systems to help manage multi-national development teams, O. Diegel, D.P.K. Singh, S. Singamneni, A. Withell
Finite elements analysis of cylindrical copper shelled SLA electrodes, V. Iakovakis, J. Kechagias, G. Petropoulos & S. Maropoulos
7. Applications
EOS innovations for e-manufacturing: High performance polymers and integrated quality management system, J. Greses & C.M. Stotko
Digital technologies and the potential for CNC texturing the built environment, T. J. Miller
Rapid Manufacture of Dies and Moulds using Fused Deposition Modeling and Electrical Discharge Machining, S. Singamneni, O. Diegel, D.P.K. Singh & A.R. Chowdhury
Application of 3D colour printing for the rapid prototyping of functional models, S. Junk & J. Sämann-Sun
The Power of a Single Prototype: Sustainable Fashion Textile Design and the prevention of Carcinogenic Melanoma, J. Farrer RCA & A. Finn
Technology transfer in digital prototyping by means of research laboratories: two case studies in architecture schools, G.Celani, R. Pupo & J. Duarte
A Design increase to hospital regulator pressure, F. Ulbrich, C.B.L. Ulbrich & C.A.C. Zavaglia
Potential of Building Information Modeling (bim) system, M. R. Oliveira
Medical Applications of Rapid Prototyping – from Applications to Classification, J.Tuomi, K. Paloheimo, R. Björkstrand, M. Salmi, M. Paloheimo & A. A. Mäkitie
Cost and benefit analysis of fused deposition modelling (FDM) technique and selective laser sintering (SLS) for fabrication of customised foot orthoses, J.M. Saleh & K.W. Dalgarno
A Novel Methodology in Design and Fabrication of Lingual Orthodontic Appliance Based on Rapid Prototyping Technologies, H. Kheirollahi, S. Rahmati & F. Abesi
Design of Ergonomic Leisure Chair, C. Capela, A. Cerva, & P. Camaño & F.V. Antunes
