Buch, Englisch, 2720 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 4940 g
Buch, Englisch, 2720 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 4940 g
ISBN: 978-3-0357-1129-5
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Committees, Sponsors
Chapter 1: Keynote Papers
Fatigue Life Extension by Crack Repair Using Double Stop-Hole Technique
Intermetallic Phases in New Steels
An Artistic Approach to Thermal Spray
Dynamic Transformation during Plate and Strip Rolling
The Role of Microstructure in Creep Strength of 9-12%Cr Steels
Micro-Mechanical Responses of Ultrafine-Grained Materials Processed through High-Pressure Torsion
The Development of Superplasticity and Deformation Mechanism Maps in an Ultrafine-Grained Magnesium Alloy
Revision of ISO 27306 for CTOD Toughness Correction for Constraint Loss
Development of Polymer-Based Composite Coatings for the Gas Exploration Industry: Polyoxometalate Doped Conducting Polymer Based Self-Healing Pigment for Polymer Coatings
Anelastic Phenomena Preceding the Melting of Pure Metals and Alloys
Combined Effects of Grain Boundary Convection and Migration in Dynamic Phase Transformations
Complex Cell Physiology on Topographically and Chemically Designed Material Surfaces
Metallurgical Aspects Affecting Thermomechanical Processing of Ti Based Microalloyed Steels
Thermomechanical Processing of Medium Manganese Steels
Diamond Based Schottky Photodiode for Radiation Therapy In Vivo Dosimetry
Thermo-Mechanical Training of Stainless Steels to Improve Damping Capacity
Development of High-Temperature Shape Memory Alloys above 673 K
Advanced Intermetallic TiAl Alloys
Development and Research of Low-Cost Titanium Alloys, Especially Case of Japan
Enhancement of Mechanical Biocompatibility of Titanium Alloys by Deformation-Induced Transformation
Chapter 2: Contributed Papers
Magnetic Shape Memory - Polymer Hybrids
Hardness Homogeneity in an AZ80 Magnesium Alloy Processed by High-Pressure Torsion
Microstructure Evolution and Deformation Mechanisms of Harmonic Structure Designed Materials
A Comparative Study of Molecular Motion Cooperativity in Polymeric and Metallic Glass-Forming Liquids
Damage Initiation in Dual-Phase Steels: Influence of Crystallographic and Morphological Parameters
Microstructure and Friction Behavior of AISI 52100 and D2 Steels Subjected to Ultrasonic Nanocrystalline Surface Modification (UNSM) Technique at a High Temperature
Microstructure Study of Nickel-Based Superalloys after Deep Cold Rolling
IN792 DS Superalloy: Optimization of EB Welding and Post-Welding Heat Treatments
Mathematical Model of Microstructural Evolution of Hot Rolled Wire Rods for Nb Microalloyed Steels
A Study on the Microstructural Characterization of Rene´ 142 Deposited Atop Rene´ 125 Processed through Scanning Laser Epitaxy
Correlations between Defect Content, Mechanical Properties and Fractographic Investigation of AlSi9Cu3(Fe) Alloy Reference Castings
Influence of Thermal History on the Hot Ductility of Ti-Nb Microalloyed Steels
Innovative Experimental Approaches and Physical Measurement Methods for Fatigue Monitoring and Life Assessment
Novel Concepts for the Application of Magnesium Sheets and Profiles in Crash Loaded Vehicle Areas
Influence of Microalloying Elements Ti and Nb on Recrystallization during Annealing of Advanced High-Strength Steels
Regularities of Microstructure Evolution and Strengthening Mechanisms of Austenitic Stainless Steels Subjected to Large Strain Cold Working
Effect of Temperature and Strain Rate on the Mechanical Properties of 99.5 Aluminium Rods Extruded by KOBO
Miniaturized Flow-Through Bioreactor for Processing and Testing in Pharmacology
Microretina: An “Open Source” Tool for Retinal Images Analysis
Phase Stability Study of the Shape Memory Alloy CuAl-X (X: Be, Zn, Ti, Ni, Ag and Au) by Ab Initio Calculations
Phase Constitution and Martensitic Transformation Behavior of Au-51Ti-18Co Biomedical Shape Memory Alloy Heat-Treated at 1173K to 1373K
Thermal Plasticity Index of Nanostructured N-Based Coatings on HSS 6-5-2 (1.3343) Tool Steel
Microstructural Investigation of Oxynitrocarburized Components Processed at Different Temperatures
Numerical Simulation of the Effects of Preheating on Electron Beam Additive Manufactured Ti-6Al-4V Build Plate
Development of Al-Mg-Si-(Cu) Alloys for Automotive Body Panels and the Related Ageing Behaviours
Optimal Deformation Hardening in Lead Base Anodes for Copper Electrowinning for an Appropiate Working Life
Gold Recovery from PCBs with Thiosulfate as Complexing Agent
Friction Stir Processing at High Rotation Rates of a Magnesium Alloy: Mechanical Properties at High Temperatures and Microstructure
Fracture Surface Characterisation of Friction Stir Processed Magnesium Alloy after Mechanical Tests
Influence of Dynamic Strain Ageing and Long Term Ageing on Deformation and Fracture Behaviors of Alloy 617
Development and Industrial Applying on Rolling Mill 5000 of the Model of Austenite Grain Size Evolution in Nb-Microalloyed Steels
Effects of Precipitated Particles on Microstructure Evolution during Thermo-Mechanical Processing of Al-Zn-Mg-Cu Alloy
Analysis of Deformation and Internal Defect in Flat-Wedge Cross-Wedge Rolling of GH4169 Superalloy
Effects of Laser Power on Track Profile and Structure Formation during Selective Laser Melting of CoCrMo Alloy
The Observation of Austenite to Ferrite Martensitic Transformation in an Fe-Mn-Al Austenitic Steel after Cooling from High Temperature
Mechanical Analyses of Welding in Practical Field
Mechanical Properties of Fine-Grained and Ultrafine-Grained Ti-6Al-4V with Equiaxed and Bimodal Microstructures
The Effect of Final Annealing Heating Rate on Abnormal Grain Growth in a Fe-3.5%Si Steel
In Situ Characterisation of Austenite/Ferrite Transformation Kinetics and Modelling of Interphase Precipitation Inter-Sheet Spacing in V Microalloyed HSLA Steels
Tensile Stress Analyses through Digital Image Correlation of Single Lap Joints of High Strength Steel and Aluminum Alloy Using Adhesive Bonding
Analysis of Pre-Strain in a Hybrid Forming Process Including Stretch and Incremental Sheet Forming
Fatigue Crack Growth in Flow Formed INCONEL 718
Modeling the Microstructural and Yield Strength Evolution of an Age-Hardenable Al Alloy for High Temperature Applications
Materials Research at University of Nevada, Las Vegas
Laser-Induced Surface Texturing of Metal or Organic Substrates for Structural Adhesive Bonding
Nanooxides Derived from Hydrotalcites as Catalysts for Dry Methane Reforming Reaction - Effect of [Ni(EDTA)]2- Adsorption Time
Comparative Study of Optimization in Pultrusion with Pre-Heating and Die-Cooler Temperature for Improved Cure
Dynamic Piezoelectric Behavior of Lithium Niobate at High Temperature
Relationship between the Yield Strength-Fracture Toughness Balance and the Multiscale Microstructure of a Maraging Stainless Steel for Aircraft Applications
Photonic Application of Diatom Frustules
Correlation between Aging Effects and High Temperature Mechanical Properties of the Unmodified A356 Foundry Aluminium Alloy
Manganese Effect on Q&P CMnSi Steels
Microstructural Evolution and Mechanical Behavior of Low Density Fe-Mn-Al-C Steels with High Stacking Fault Energy
Nanocomposites Consisting of Carbon Nanotubes and Nanoparticles of Noble Metals
Mechanical Behaviour of Materials during Creep with Changing Loads
Microstructure and Texture Evolution in Nickel during Accumulative Roll Bonding
An Experimental Investigation of the Size Effects in Forming Processes of High-Purity Thin Metallic Sheets
The Microstructural Criterion for Creep Strength Breakdown in a 10%Cr Martensitic Steel
SPD Processed Materials Mechanical Properties Determination with the Use of Miniature Specimens
Machinability of an Experimental Graphitised Carbon Steel
Effect of Microalloying Elements on Phase Transformation, Microstructure and Mechanical Properties in Dual-Phase Steels
Development of Armor High Strength Steel (HSS) Martensitic Plates for Troops Carriers
Physical Simulation of Thermo-Mechanical Processing of Ferritic-Bainitic Dual Phase (FBDP) Steel
Evolution of Microstructure, Phase Composition and Hardness in 316L Stainless Steel Processed by High-Pressure Torsion
Influence of Cross Section on the Parameters for Linear Friction Welding of High-Strength Chains
Determination of Crystallographic Orientation near a Chill Zone Using Ghost Lines
Crystal Structure and Microstructure of Martensite in Ni-Mn-In Alloys and the Behavior of Variant Rearrangement under Uniaxial Loading
Accelerated Aging and Portevin-Le Chatelier Effect in AA 2024
Microstructure and Mechanical Properties of Mg-6Zn-1.4Y Alloy Produced by Rheo-Squeeze Casting Process
The Interface Character Distribution and Intergrannular Corrosion Resistance of Duplex Stainless Steel UNS S32304
The Role of the Nd/Zn Ratio on the Stability of Mg-Zn-Nd Clusters and the Evolution of Texture in Two Mg-Zn-Nd Alloys during Annealing
Microstructural Evolution in a 9%Cr-3%Co-3%W-VNb Steel during Creep
Integrated Defect Classification in Manufacturing of Carbon Fibre Reinforced Thermoplastic Polymer Matrix Composites
Plasticity and Size Effects in High Purity Cobalt: An Experimental Study
Modelling Methods of Magnetohydrodynamic Phenomena Occurring in a Channel of the Device Used to Wash out Spent Automotive Catalyst on Metallic Substrate by a Liquid Metal
Microstructure and Residual Stress in Rotary Friction Welded Dissimilar Metals of AA7020 Aluminium Alloy with 316L Steel
Residual Stress Measurements on IN718 Fatigue Specimens Using X-Ray Diffraction Techniques
Components of a Heart Catheter System for High Risk Patients
Granulation of Bulk Metallic Glass Forming Alloys as a Feedstock for Thermoplastic Forming and their Compaction into Bulk Samples
Modelling the Local Microstructure Properties due to Multi-Pass Welding
Local Residual Stress Depth Distribution in the Inner Gearing of a Case Hardened Sliding Collar
The Quantification of Galling in Forming Operations of Hot Dip Galvanized Sheet Metal under Laboratory Conditions
Lightweight Titanium Metal Bipolar Plates for PEM Fuel Cells
Microstructure-Property Relationships in Medium-Mn Steels with Metastable Retained Austenite
Combination of Microstructural Investigation and Simulation during the Heat Treatment of a Creep Resistant 11% Cr-Steel
Creep Tendencies of Cu-Al Thin Wires Submitted to Moderate Temperature Conditions: Influence of Intermetallic Compounds
Torsional Piezoelectric Strain in Monocrystalline Paratellurite
High Performance Magnesium Based Composites Containing Nano-Length Scale/Amorphous/Hollow Reinforcements
Recrystallization Behavior of Aluminum Thin Foils with Various Purity
Effect of Boron Addition on Microstructure and Mechanical Properties of AZ84 Mg Alloy
Progress in Titanium Machining
Unraveling the Age Hardening Response in U-Nb Alloys
Casting of an Mg Alloy Clad Strip Using a Twin Roll Caster Equipped with a Scraper
High-Temperature Deformation Behavior of (Mo0.85Nb0.15)Si2 Crystals with C40/C11b Lamellar Microstructure
Reinforcing Open Cell Aluminum Foams by Amorphous Ni-P Coating
Preparation of Al72Ni8Ti8Zr6Nb3Y3 Amorphous Powder and Bulk Material
X-Ray and Neutron Scattering Studies of the 9Ni Cryogenic Steel and its Weld Joint
Surface Modification of Magnesium Alloy by Shot Lining and Laser Heating
Environment-Assisted Cracking of Super-Elastic TiNi Alloy Depending on Solution pH and Electrochemical Potential
Evaluation of Weldability of Titanium Alloy Ti-6Al-4V and Aluminum Alloy 6061 Produced by Electron Beam Welding
Material and Mechanical Aspects of CMAS Damage Progression on Thermal Barrier Coatings and its Non-Destructive Detection
Effects of Electric Current on the Microstructures and Mechanical Properties of Artificial Aged 6061 Alloy
Influence of High-Pressure Torsion on the Microstructure and the Hardness of a Ti-Rich High-Entropy Alloy
Magnetic Shape Memory Effect in Ni-Mn-Ga Single Crystal
Microstructure and Microtexture Evolution of Invar Alloy after Cross Accumulative Roll Bonding (CARB) Compared to ARB
Surface Structuring by Pulsed Laser Implantation
Influence of Carbon Addition on Mechanical Properties of Thixomolded Magnesium Alloy
Characterization of the Acoustic Emission Response and Mechanical Properties of Mg Alloy with LPSO Phase
Phonon Excitations in Pd40Ni40P20 Bulk Metallic Glass by Inelastic X-Ray Scattering
Recovery or Non-Recovery in Al-0.1% Mg and Al-1% Mg Alloy during High-Pressure Torsion Processing
In Situ Tensile Texture Analysis of a New Mg-RE Alloy
Impact of Silicon, Magnesium and Strontium on Feeding Ability of AlSiMg Cast Alloys
Study on the Porosity in Al-Zn-Mg-Cu High Strength Alloy DC Ingot
Micro-Scale Strength Evaluation for Bonding Interface of Cold Sprayed Coatings
Thermal Conductivity and Tensile Property of Mg-Zn-Y Casting Alloys with Long-Period Stacking Ordered Phase
Stress and Strain Analysis in an Fe-Ga Alloy Single Crystal
Effect of Annealing upon Retention of He and H in Irradiated SiC
Preparation of Mg-TM-Y (TM=Transition Metal) Alloys with Long Period Stacking Ordered Phase and their Superior Mechanical Properties
High Quality TMCP Production and Metallurgy of Niobium Bearing Steels
The Optimal Placement of Sensors by Minimizing the Maximum Probability of Non-Detection Using Genetic Algorithm
Surface Engineering of Metal Oxide Photoelectrodes for Improved Band Alignment in Solar Water Splitting Cells
Long-Term Performance Analysis of Geomembrane Considering Stress Cracking Resistance
Al-5Cu Alloy Processed by Equal-Channel Angular Pressing
Analysis of Thin Strip Shape and Profile in Cold Rolling: A Way to Improve Strip Profile and Mechanical Properties
Local Surface Phase Stability during Cyclic Oxidation Process
Process Parameter Optimization of Fused Deposition Modeling for Helical Surfaces Using Grey Relational Analysis
Influence of the Processing Variables on the Microstructure Evolution of a Bainitic Carbide-Free Steel
The Effect of Sample Preparation on the Microstructure of Austenitic-Ferritic Stainless Steel
Effect of Red Scale on the Bendability of Ultrahigh-Strength Strip Steel
Effects of Additional Elements on Hydrogen Storage Properties for Vanadium Alloys
Evaluation of Rolling Contact Fatigue by Using an X-Ray Diffraction Ring Analyzer
Effect of Electroless Ni-P Plating on Mechanical Properties of Al-4%Ge Alloy
Fiber Laser Beam Welding of Ti-6242 - Effect of Processing Parameters on Microstructural and Mechanical Properties
Manufacturing of Aluminum Metal Matrix Cast Composites with Carbon Based Additives for Thermal Management Applications
Microstructure Evolution Induced by Sliding-Based Surface Thermomechanical Treatments - Application to Pure Copper
Determination of the Grain Coarsening Temperature in Nb Microalloyed Steels by Multiphase-Field Model
The Effects of Ultrasonic Nanocrystal Surface Modification Technique Temperature on Microstructure and Wear of Alloy 600
Microstructural Characterization and Mechanical Properties of Stainless Steel Inlay Welded Dissimilar Materials
Effect of Large Strain on Texture Formation Behavior of AZ80 Magnesium Alloy during High Temperature Deformation
Effects of Die Steel on Die Soldering of Aluminum Alloy Die Casting
Synchrotron Investigation on the Precipitation Behaviour of Niobium Microalloyed Steel
Modeling of the Hot Rolling: Towards the Industrial Applicability
On the Dynamic Superplasticity
Effect of Oxygen Potential Gradient on Mass Transfer in Polycrystalline a-Alumina at High Temperature
EBSD Analysis and Assessment of Porosity in Thermal Barrier Coatings Produced by Axial Suspension Plasma Spraying (ASPS)
Structure Formation in Ni Superalloys during High-Speed Direct Laser Deposition
Structures and Properties of Laser-Assisted Cold-Sprayed Aluminum Coatings
The Effect of Boron Addition on Precipitation and Hot Ductility of 1.5Mn-0.1Nb-Ti Carbon Steels in As-Cast Condition
New Metallurgy of Additive Manufacturing in Metal: Experiences from the Material and Process Development with Electron Beam Melting Technology (EBM)
Novel Bioreactor-System for In Situ-Cultivation of Artificial Tissue
Influence of Thermo- and HIP Treatments on the Microstructure and Mechanical Properties of IN625 Alloy Parts Produced by Selective Laser Melting: A Comparative Study
Modelling Yield Strength in an A6061 Aluminium Alloy
The 3D Imaging and Metrology of Microstructural Elements in Innovative Materials for Clean Energy Systems and Aeronautics
Effect of Layer-by-Layer Texture Inhomogeneity on the Stress Corrosion of Gas Steel Tubes
Effect of Prior Austenite Grain Size on Yielding Behavior of the Low-C Martensitic Stainless Steel
Sheet Forming Processes for AW-7xxx Alloys: Relevant Process Parameters
Resolving the Strength-Ductility Paradox through Severe Plastic Deformation of a Cast Al-7% Si Alloy
Osteoconductivity of Protein Adsorbed Titanium Implants Using Hydrothermal Treatment
Effect of Prior Strain on Damping Capacity and Mechanical Property during Heat Treatment
Welding of Automotive Aluminum Alloys by Laser Wobbling Processing
Mechanical Properties of Polymer-Based Hybrid Films: Tailoring the Hybrid Interface Using Soft Chemistry
Mechanical Behavior of a Metal Matrix Nanocomposite Synthesized by High-Pressure Torsion via Diffusion Bonding
Effect of CH4 Content on the Characteristics of Surface Layers of Low Temperature Plasma Nitrided 2205 Duplex Stainless Steel
Separating Technology of Pure Zirconia from Zircon-Sand by the Ar-H2 Arc Plasma Fusion and the Microwave Leaching
Atomic Layer Deposited Protective Layers
The Role of Preliminary Heat Treatment in the Formation of Ultrafine-Grained Structure in the Implementation of the Combined Process "Rolling - Equal Channel Angular Pressing"
The Study of the Microstructure of the Metal after Rolling Thick Workpieces of Nonferrous Metals and Alloys in Relief and Smooth Rolls
Gas Nitriding of High-Vanadium Alloy Steel
Morphology Evolution of Grain Boundary Carbides in Highly Twinned Inconel Alloy 600
Deep Ultraviolet Photodetector Based on Sulphur-Doped Cubic Boron Nitride Thin Film
Influence of Cu Doping on Martensitic and Magnetic Transitions in Ni-Mn-Sn Alloys
The Effect of Process Parameters in Interdendritic-Melt Solidification Control Technique on the Microstructure and Properties of a Ni-Base Superalloy
Affinity Viscosimetry Sensor for Enzyme Free Detection of Glucose in a Micro-Bioreaction Chamber
Experimental Bio-ESPI for Validation of Magnetic Induced Deformation on HeLa Cells
Microstructure of Z-Phase Strengthened Martensitic Steels: Meeting the 650°C Challenge
Morphological Evolution of Carbides in DZ125 Superalloy during Heat Treatment
Quasi-Static and Dynamic Properties of Ti-3.5Al-2.5V-1.5Fe-0.25O Titanium Alloy Plates
Investigations on Hot Tearing Susceptibility and its Mechanism of Mg-Zn-Y Alloys
Analysis of the Static Recrystallization Behavior of Nb-Ti Microalloyed Steels Including Low Strain Levels
Macrosegregation of Alloying Elements in Hot Top of Large Size High Strength Steel Ingot
Influence of Coiling on Microstructural Evolution and Mechanical Properties of Strip-Cast Low-Carbon Low-Niobium Steel
Preparation and Squeeze Casting of Nano-SiCP/A356 Composite Assisted with Ultrasonic Vibration Process
Enabling Diamond Deposition with Cold Spray through the Coated Particle Method
The Effect of Thermo-Mechanical Coupling on Microstructures and Tensile Properties of Al-Li 2198-T8 Alloy via Friction Spot Welding
Substituting of a Thermodynamic Simulation with a Metamodel in the Scope of Multiscale Modelling
A Novel Facility to Investigate Dust Mobilization in Confined Environments with Applications to the Security of the Pharmaceutical Industry
Thermal Desorption Spectroscopy Study on the Hydrogen Behavior in a Plasma-Charged Aluminum
Microstructure Evolution of a Directionally Solidified Ternary Eutectic Mo-Si-B Alloy
Friction Stir Welding on Light-Weight Metal - Aluminum Alloy Al6061
Characterization and Modelling of the Microstructure and Texture Evolution in AlMgSi-Extrusions
Oxidation of Fe-Al Alloys (5-40 at.% Al) at 700 and 900 °C
Inf
