Sonstiges, Englisch, Band Volumes 1025-1026, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
Sonstiges, Englisch, Band Volumes 1025-1026, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
ISBN: 978-3-03795-950-3
Verlag: Trans Tech Publications
The 213 papers are grouped as follows:
Chapter 1: Applied Mechanics and Manufacturing Processes Engineering,
Chapter 2: Material Science and Technology,
Chapter 3: Civil and Structural Engineering,
Chapter 4: Other Related Topics.
Autoren/Hrsg.
Weitere Infos & Material
Particleboard Manufactured with Additions of Eucalyptus Bark in Different Percentages in the Internal LayerScreening for Welding Defects Using Acoustic Emission TechniqueMedium Density Particleboard (MDF) Produced with Pinus caribaea Fibers and Castor Oil Based Polyurethane ResinFatigue Evaluation of Trough Splice Joints in Orthotropic Steel DecksDesign of Pressurized Vaulted Rectangular Conduits Using the Rough Model Method (Part 2)Thermo Elastohydrodynamic Lubrication with Liquid-Solid LubricantThe Influence of the Production Process on Mechanical Properties of Rubber Testing SamplesInfluence of Moisture Content in some Mechanical Properties of Two Brazilian Tropical Wood SpeciesPhysical and Mechanical Properties of Dipteryxodorata (Aublet) WilldModelling of Fretting Wear under Partial Slip Conditions Using Combined Isotropic-Kinematic Hardening Plasticity ModelModeling Errors in Coordinate Measuring Machines and Machine Tools Using Homogeneous Transformation Matrices (HTM)Extraction and Thermal Processing of Beke Oil SandsInfluence of Storage Period of Pieces in Stiffness of Pinus elliottii Glulam BeamsThe Cracking Mechanism and Anti-Cracking Measures for Hydraulic Mass ConcreteApproach to the Ear Plate and Round Steel ConnectionNumerical Modelling of Nonlinear Vibration Isolation System Free OscillationsStudy about the Stone Curves and the Development of Polygonal Shape Cutting DeviceAbout Verification of Discrete-Continual Finite Element Method for Two-Dimensional Problems of Structural Analysis Part 1: Deep Beam with Constant Physical and Geometrical Parameters along Basic DirectionAbout Verification of Discrete-Continual Finite Element Method for Two-Dimensional Problems of Structural Analysis Part 2: Deep Beam with Piecewise Constant Physical and Geometrical Parameters along Basic DirectionFatigue Evaluation of Autofrettaged Thick-Walled Cylinders with a Radial Cross-BoreTesting of Mechanical Protection of Data Distribution MechanismsUtilization of Mosaic Sludge Waste into Fired Clay Brick: Properties and LeachabilityExperimental and Numerical Investigation on Flow Characteristics of a Water Jet ImpingementStructural Design and Improvement of Wind-Driven Generator Cooling SystemA Ground Test Method and the Error Analysis of the Heat Exchanger in the Intake of AircraftRefined FEM Analysis of 1000MW Generator Stator during Integral Transportation on Railway3D Ice Accretion Simulation for Complex Configuration Basing on Improved Messinger ModelAutomatic Machine for Sorting Colored Objects with Conveyor BeltResearch into Fatigue Crack Life Characteristics of Bellows Operated under High-Frequency LoadEffect of Thermocycling on Shear Bond Strength of the Three No-Mixed Bonding AdhesivesComparisons of the Mechanical Properties of 3 Commercial Brands of Non-Latex Orthodontic ElasticsStudy on the Performance of an Open Loop Cycle CO2 Refrigeration System in the Extreme Limit ConditionDynamic Characteristic Analysis of Hydraulic Servo System in a Mold Oscillating MechanismEvaluation of Longitudinal Modulus of Elasticity in Wood Species for Structural ApplicationEvaluating a Test Parameter in Static Bending for Pinus sp. WoodThe Influence of Different Carbon Type Fillers on the Mechanical and Physical Properties of Co-Extruded PP-Based WPCTensile Properties during Solidification of Aluminium Die Casting Alloys Grade ADC5, ADC6 and ADC12Mechanical Property Improvement of Poly(Butylene Succinate) by Reinforcing with Modified Fumed SilicaMechanical Properties of PLA/LLDPE Films Reinforced with Silica from Rice HuskEffect of Wood Moisture Content in Edge Glued Panel Bonding for Furniture Industry: Analysis of Shear-Stress and Rupture in BondlineSimulation Analysis of In-Service Bamboo and Pine EGP Composite FlooringCharacterization of Mechanical and Thermal Properties of PP/Mineral CompositesUse of Macadamia Nutshell in the Production of Eucalyptus Salign ParticleboardsEffect of Ionizing Beta Radiation on the Strength of Bonded Joints of PolycarbonateTemperature Stability of Modified PBT by Radiation Cross-LinkingTensile Behaviour of Modified PBT by Radiation Cross-LinkingInfluence of Recycled Irradiated HDPE on Mechanical Behavior of LDPE/Hdpex BlendsCreep Test EvalutationBehavior of Recycled Material at Higher Temperature in Compression TestSize Effect of Recycled Material to Tensile Properties of PCInjection Molding of Rubber Compound Influenced by Injection Mold Surface RoughnessParticulate Composites with Wastes from Treated Wood and Tire RubberEffect of Linear Sliding Speed on Wear Behavior of Al2O3/TiC Ceramic Composite and Diamond Slicing BladeTemperature Prediction at the Blow End of the Converter via Control ModelWear Response of Composition-Modulated Multilayer Ni-W CoatingsStudy of Weld Hardness of Pipes at Elevated Temperature Application in Power PlantsCutting Ceramic Materials: Influence of Abrasive Machining and Coating Deposition on the Performance PotentialEffect of Temperature on Deactivation Force of Three Commercial NiTi Orthodontic ArchwiresComparison of Horizontal and Vertical Deactivation Force, Length and Superelasticity in Three Commercial NiTi Orthodontic ArchwiresStacking Design of Composite Laminate in Wheelchair Structure under Seat LoadingSelf-Tapping Screws without Pre-Drilling for Brazilian Reflorestation SpeciesOptimization of Eutectic Si Particles Morphology in Secondary Al-Si Cast Alloys after Different Heat TreatmentPrognosis the Erosion-Corrosion Rates for Slurry Seawater Flow in Steel Pipeline Using Neural SystemThe Influence of Cross-Section Shape Changing on Work of Cold Formed BeamThe Dynamics Model Analysis of Drying Process in Gelcasting MethodNew Method for Evaluating Dynamic Characteristics of Cantilever Spring of Vibration SensorMultiscale Model of Shape Rolling Taking into Account the Microstructure Evolution ? Finite Element ModelingComparison of the Initial Repeated Bond Strength among Three Orthodontic Bonding SystemsFinite Element Analysis of the Fine Blanking Process for Seat Recliner Plate Holder of Recreation VehicleEffects of Al Additions and Reheat Treatments on Microstructures of Modified Nickel-Based Superalloy, Grade Inconel 738, by Vacuum Arc Melting ProcessEffect of Beta Low Irradiation Doses on the Micromechanical Properties of Surface Layer of LDPENanohardness of Electron Beam Irradiated HDPEEffect of Beta Low Irradiation Doses on the Filled PA66 Measured by Micro-Indentation TestEffect of the Calcination Temperature on Ni2P/TiO2-Al2O3 Catalyst Structure and Catalytic Activity for HydrodesulfurizationEffect of Heat Treatment on Grain Growth of Beta Titanium AlloyFrequency and Temperature Dependence of Dielectric Properties of Orthorhombic HoMnO3 Thin FilmsEvaluation of Bamboo Particleboards Produced with Urea-Formaldheyde ResinPhysical Characterization of Particleboard Produced with Waste from Ethanol and Sugar MillStudy the Effect of the Substitution of Ba with Pr in Barium Ferrite Powder on Magnetic PropertiesInfluence of Rate of Heating to Aging Temperature on Precipitation Hardening in a Metastable ? Titanium AlloyInfluence of Reactive Organic Flame Retardants on Properties of Resol Phenoplast FoamsNew Nickel Based Superalloys Development by Vacuum Arc Melting Process Based on Aluminum Addition of GTD-111Toughening of Poly(Lactic Acid) by Blending with Poly(Ethylene-co-Octene)A Simple and Efficient Route for Preparing 4-Chloro-3,5-DinitropyrazoleSterilization of Oil Palm Fruits by Microwave Heating for Replacing Steam Treatment in Palm Oil Mill ProcessEffects of Soybean Antioxidant Peptides (SAP) on SOD, GSH-Px, CAT Activity and MDA Levelin VivoOptimization Statistical Condition of Incubation for the Growth State of a Recombinant Strain Produced Alkaline ProteaseRemoval of Humic Material from Mineralized Algerian Water Using Alum and Local Clay as Coagulant AidComparison Study of Oxidation Behavior of Copper at Elevated TemperaturesAnalysis of Structural Transformations of Fe80Ni10Si5B5 Amorphous Alloy Based on Temperature Changes of Electrical ResistivityComparison Study of Oxidation Behavior of Low Carbon Steel at Elevated TemperaturesSynthesis of Vanadium Powder by Magnesiothermic ReductionHydrothermal Synthesis of Porous Materials Using Calcined Kaolin with Small Molecular Amine TemplatesNickel Recycling by Magnesium Reaction of Fe-Ni Alloy ScrapEffect of ZnO Nanoparticles Synthesized by Precipitation Method on Cure Characteristics and Morphology of EPDM FoamExhaust Dyeing Poly(Lactic Acid) Fabrics with Indigo Dye Obtained from Indigofera TinctoriaExperimental Study on the Thermal Conductivity of Thermal Insulation Materials Used in Residential BuildingsLife Cycle CO2 Emission Assessment for Non-Steam Curing Precast ConcreteMedium Density Particleboard with Addition of Impregnated PaperUtilization of Terahertz Spectroscopy for Optical Behavior Determination of Recycled Modified HDPEIonizing Radiation Effect of HDPE Measured by Nano-HardnessCreep of Radiation Cross Linked HDPE at Elevated TemperatureMultilayer Medium Density Particleboard Using Castor Oil-Based Polyurethane Resin and Hevea Brasiliensis WoodEvaluating the Effect of PCD & TialN Coated Carbide End Mill?s Rake Angle on Machinability of Titanium Alloy Ti-6Al-4VHydrolyzed Fish Collagen Inhibits Inflammatory Cytokines Secretion in Lipopolysaccharide-Induced HUVECsNew Insight Technique for Synthesis of Silica Gel from Rice Husk Ash by Using Microwave RadiationToughness Enhancement of Polylactic Acid by Employing Glycolyzed Polylactic Acid-Cured Epoxidized Natural RubberAlloying of Molybdenum Disilicide with Aluminum by SHSCorrosion of Inconel 625 at 600-800?C in N2/H2O/H2S AtmospheresInfluence of Thermo-Chemical Treatment on the Surface of CP TitaniumMicrostructural Behaviors of Boron Modified LCB Titanium AlloyCompatibilization of Thermoplastic Polyurethane and Polypropylene with a SEBS CompatibilizerStrength of Bonded Joints of Linear Low ? Density Polyethylene after Radiation Cross ? LinkingThree-Dimensional Periodic Hematite Photocatalysts Fabricating by Direct Writing MethodElectrical Discharge Grinding (EDG) of Polycrystalline Diamond - Effect of Machining PolarityStudy of Degradation of Fiber - Cement Plates with Different Types of Non - Metalic FibersInfluence of Mould Release Agent on Surface Properties of Concrete with Special MatrixAnalysis of Formation and Testing of Efflorescence on Concrete ElementsPreparation of Iron Catalysts Generated from Fe-Coagulated Sludge Produced by Ferric Chloride Coagulation of WastewaterEffect of Liquefying Agents Mixed with Lower Alcohols and Catalyst on the Microwave Driven Liquefaction of WoodPolarization Behavior of Steel Corrosion in Laterite, Yellow Soil and KaolinA Fundamental Study on the Processing of Heavy Metals Contained in Underground Water by Composite Modulation Electromagnetic Field ProcessingAnti-Corrosive Performances of Environmental Friendly Materials on Al-Mg-Si Alloy3-Dimensional Porosity in Electroless Ni-YSZ Composite CoatingAcid Value Reduction Process in Mixed Crude Palm Oil by Using Low-Grade EthanolThe Synthesis and Properties of Emulsion Copolymerization of Styrene with N-Substituted Phenyl MaleimideEvaluations of Performance and Thermal Properties in Porous Asphalt Concrete Containing Steel SlagDetermination of OSB Wood Composites with Resin Derived from a Renewable Natural ResourceContribution of Electrostriction in Polyurethane/Polyaniline BlendsThe Research of Concrete Sealer Penetrating DepthsInfluence of the Electrodeposited Co-Fe Alloys? Characteristics on their Magnetic PropertiesSynthesis and Crystal Structure Studies on 6-Amino-5,5,7-Tricyano-3,3a,4,5-Tetrahydro-2H-Indene-4-SpirocyclopentaneFinite Difference Kinetics Modeling for Galvanized Steels with Post Heat TreatmentsDiffusion Coefficient of Nickel in Ni2Al3 Intermetallic CompoundEffect of Cr Plating and Plasma Nitriding on Hardness and Corrosion Resistance of H13 SteelPhase Field Simulations of Dendritic Crystal Growth with Focus on the Computational EfficiencyExperience of Replacing Basalt Aggregate by Limestone?s in Porous Asphalt Concrete
Ocimum americanum L. Essential Oil Exhibits Antimicrobial Activity Against Oral Bacteria Related to Periodontal DiseaseLamellar Liquid Crystalline Materials Modulated by 1-Ethyl-3-Methylimidazolium HexafluorophosphateDevelopment of Effective Technique for Irradiating Samples of Thin Films Using the Focused Ion BeamPreparation and Characterization of Matrimid-Based Carbon Membrane Supported on Tube for CO2 SeparationDetermination of Nonlinear Refractive Index and Two-Photon Absorption Coefficients of New Nanocomposite Materials Based on Biosilicates Using Z-Scan MethodEffect of the Reduction Temperature on Nickel Phosphide Catalyst Structure and Catalytic Activity for HydrodesulfurizationAn Investigation of Fluoride Release from Orthodontic Elastomeric LigaturesComparative Study of the Synthesis Condition for Orthodontic Polymethylmethacrylate PowderEffect of Interchanging Liquid Components of Two Auto-Polymerizing Orthodontic Acrylic Resins in their Flexural PropertiesThe Distinguishing Quality of Water Droplets on Insulating Surface under AC and DC Electric Field StressIncreasing User Comfort for Public Seating - User Interaction with MaterialsResearch on Selective Reduction of Laterite Nickel Ore by CO2/H2 Mixed GasHyperpressed Calcium Sulfate Dihydrate StructureInvestigation of Interaction Effects of Environmental Conditions on Improvement of Zn Heavy Metal Adsorption Mechanism by Na-Nano BentoniteOn the Structural and Optical Properties of Lead Selenide NanolayersOn Pretreatment Experimental Study of Yunnan Phosphorus Building GypsumOil Production from Polyethylene Plastics by Thermal Pyrolysis Using a Reflux CondenserExperimental Research of New Tram Track Construction Operating Fatigue CapacityBridge Fire Risk Assessment on the Highway in South KoreaVertical Anchor Bolt Performance Finite Element Analysis of Modular Road SlabFinite Element Analysis of Reinforce RC Beams Considering Loading History with Pre-Stressed CFRP SheetsStudy of Bridge Piers Lateral Stiffness in Railway Vehicle-Bridge SystemBuckling Behavior of Catheter Reinforced with Braids under Combined Loading of Axial Compression and Torsion: Effect of Displacement Speed on Buckling Region under Proportional Deformation PathNew Bolted End-Plate Connection DesignThe Key Technology Research of the Pushing Closure Process about Jiashao Bridge Based on Geometric Control MethodVibration and Load Suppression of Offshore Floating Wind TurbineModel of Two-Link Planar Robot on SimulationXBehavior and Design Recommendations of Splice Connection in Weak-Axis Column-Tree Steel Moment FramesSeismic Performance Evaluation on Cyclic Testing of Weak-Axis Column-Tree ConnectionsSimulation of Interference Characteristics of the Model Supporting Beams with Different Forms of Section in Wind Tunnel TestAeroelastic Vibration of Super-Tall BuildingsTime History Analysis of Steel Tall BuildingsCoherence of Fluctuating Wind Speed and Along-Wind Force Power Spectrum of Tall BuildingComprehensive Evaluation and Analysis of Water-Inrush Source in Wolonghu Coal MineWeight-in-Motion-Based Ambient Truck Characteristic Identification in Highway BridgesReinforced Concrete Deep Beams with Openings Strengthened Using FRP ? A ReviewEigenvector Centrality Measurement Using Patent Information of Wind Power EnergyEffect of Loading Frequency on Fatigue Life of Extended Hollobolt in Concrete Filled Hollow SectionNumerical Simulation of Galloping for Iced Quad-Bundled ConductorPressure Transient Modeling in Geothermal Reservoir by Using Picard-McLaurin IterationThe Performance of a Vertical Well Subject to Edge Water DriveAnalytical Models for Determining Rotational Capacity of Clip-Angle Connections under Seismic LoadingEvaluation of Noise Characteristics of Drainage and Water Supply Systems in Apartment BathroomsStudy on the Influence of Different Supporting Point Stiffness on External Suspension Tower Crane and Supporting StructureEffects of Fibres on Improvement the Cracking in Concrete SlabsThe Determination of Frost Resistance on Ultra High Performance ConcreteDevelopment of Materials Used in Pedestrian BridgesStudy on the Influence of Different Strut and Beam?s Stiffness on the Horizontal Force of the Tower Crane Supporting StructureDurability Quality Research of Cement Mortar Containing Solar PV CellsStrength Quality Research of Cement Mortar Blended with Solar PV CellsInsulation Systems and Green Sustainable ConstructionSoil Grouting as Seismic Liquefaction CountermeasureFuzzy Set Approach in the Fatigue Damage Analysis of Composite StructuresDiversity Measurement of Fuel Cell Field Using Patent InformationModelling and Characterization of Planar ComponentsDevelopment of Automatic Corner Stone Trimming Working Machine for Boundary StonesAnalysis on the Application of PV Technology in Terms of Tranditional Roof House. Case Study: Julang Ngapak Sundanese Traditional Roof FormA Study on the Deduction of Major Construction Wastes in Construction Phase through Environmental Impact AssessmentAssessment of GHG Emission Reduction Performance for Certification Criteria of Korea Green Building Scheme (G-SEED) - Focusing on Materials and Resources Category -Analysis of CO2 Emission in the Waste Disposal Process Based on Computation of Construction WasteThe Origins of Nanotechnology in LatviaDeciding the Recycling Progress of Refrigerator Compressor Based on Na?ve BayesAmbient Energy Harvesting for Wireless Sensor Nodes: A ReviewEnergy Performance Analysis on the Design Conditions of High-Rise Apartment Houses in South KoreaFast Transmission Schemes in Substation Automation SystemMonitoring and Fault Identification in Aeronautical Structures Using an ARTMAP-Fuzzy-Wavelet Artificial Neural NetworkAnalysis of Structural Integrity of a Building Using an Artificial Neural Network ARTMAP-Fuzzy-WaveletResearch on Anti-Windup Controller of Autonomous Navigation Vehicle Based on Improved Adaptive FilterExperimental Investigation of Thermoelectric Power Generation Using Radiative Heat ExchangeProduct Data Management Systems as a Tool in Engineering Change ManagementModeling Interior Environment of Historical Building and Determination of Critical Places for Application of Nanotextiles ProtectionAugmented Reality Aided Control of Industrial RobotsResearches on the Chaotic Characteristics of Fluctuating Pressure in Slit-Type Energy DissipaterA Study on Proposal of Environmental Assessment Method in Materials and Resource Category of Korea Green Building CertificationControl Instability Applied to a Micro Electro Mechanical Actuator System (MEMS)Advanced Methods of Three Dimensional Data Obtaining for Virtual and Augmented Reality
