Sonstiges, Englisch, Band Volumes 725-726, 1722 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, Band Volumes 725-726, 1722 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Applied Mechanics and Materials
ISBN: 978-3-03859-106-1
Verlag: Trans Tech Publications
Chapter 1: Buildings and Structures;
Chapter 2: Foundations, Underground Structures;
Chapter 3: Hydraulic Engineering Works;
Chapter 4: Building Materials and Products;
Chapter 5: Applied Mechanics in Material Science, Static and Dynamic Loads of Structures and Facilities;
Chapter 6: Organization and Planning of Construction Works;
Chapter 7: Architecture and Urban Planning;
Chapter 8: Air, Gas and Water Research in Area of Civil Engineering;
Chapter 9: Energy Efficiency, Green Buildings and Sustainable Development;
Chapter 10: Education and Training in Area of Civil Engineering
Autoren/Hrsg.
Weitere Infos & Material
The Brickwork Joints Effect on the Thermotechnical Uniformity of the Exterior Walls from Gas-Concrete BlocksCalculation Method of Justification of Technical Actions for Prevention of Ice Dams Formation on Buildings with a Pitched RoofFire Resistance of Non-Crack Resistant Flexural Reinforced Concrete ElementsHeat and Mass Transfer in Low-Temperature Insulation in Moisture ConditionsComparison of Different Types of Transparent Structures for High-Rise Buildings with a Fully Glazed FacadeProdrome in Experimental Investigation the Thermal Shielding Systems in Enclosure StructuresImprovement of the Double Skin FacadesReduced Thermal Resistance of a Two-Layer Wall ConstructionUnsteady Temperature Condition of the Enclosure StructureUnsteady Airway as an Effective Method of the Ice Melting Prevention on the Building?s RoofHumidity Conditions of Enclosing Structure with Silicate Brick Veneer and Variable Air GapCharacteristic and Application of Facade System ?Polialpan?The Glass Ventilated Facades ? Research of an Air GapThe Results of Experimental Determination of Air Output and Velocity of Flow in Double Skin FacadesImproving Technology of Constructing Pre-Fabricated Buildings in the Conditions of Northern RegionsConstruction of Temporary Accommodation Camp and Selection of Optimal Type of BuildingAnalysis of the Masonry Structure Calculation with Vertical Ring Beams According to European StandardsProgram- and Goal-Oriented Approach to Organization of Monitoring Deformations of Buildings and StructuresConstitutive Relationships of Concrete and Reinforcing Steel under High TemperaturesObjective Estimation of the Use of Windproof and Weatherproof Membranes in Double Skin FacadesFire Safeguards of ?Plastbau? ConstructionThe Research of the Effect of Basalt Wool on the Acoustic Isolation of the Floating FloorPerformance Evaluation of High-Rise Complex Construction Depending on Building Site PlacementUsing ANN in Process of Seismic Damage Prediction for Residential BuildingsExperimental Testing of Retaining Walls of Precast ElementsSpecific Features of Calculating Underground Structures Erected with Use of Freezing MethodCalculation of Retaining Walls with Anchoring at Different LevelsThe Comparison of Pile Load Capacity Based on the Results of Analytical Calculations and Static TestsAccuracy Appraisal of Pile Simulation by Elastic LinkageSome Aspects of Maintaining Inclined Tunnel Escalators in St. PetersburgEffectiveness of Soil Reinforcement Based on Complex Ash-Cement BonderStress-Deformation State in the Rock Massif (Illustrated with the Example of Macedonia)Improving Technological Processes for Borehole Drilling in Construction Using Vibration ImpactLoads from Ice Ridge Keels ? Analytical vs. NumericalCoastal Ice Investigation on the Site of Further Bridge Construction - Sveagruva, Svalbard, NorwayUsing of Ice for Constructing Islands in the Arctic ConditionsProblems Concerning Gravel Islands Constructing and Exploitation in the Arctic ConditionsComprehensive Settlement of the Gravitational Drilling Platform on the Seismic ActionEngineering Properties of Sea Ice Ridges in the Barents Sea in 2012-2014 Years for Evaluation of Ice Loads on Offshore StructuresIce Regime for Basins and Pumped-Storage FacilitiesHydropower Potential Estimations and Small Hydropower Plants Siting: Analysis of World ExperienceMulticriterion Optimization of Power Sites Location on the WatercourseImpact Wave on Port Mole in during ConstructionExperimental Study of Tsunami-Type Waves Impact on Soil near Foundation of Offshore Gravitational-Type PlatformsThe Influence of Tectonic Faults on a Stress-Strain State of a Large Concrete DamGeotechnical Researches for Proving the Design Decisions for Reconstruction of the Dam on the Creek PevekCharacteristics of Bulk Carriers with Respect to the Developing Export Coal Terminals on the Far East of RussiaEnsuring the Reliability of Earth Dams in Complex Hydrogeological ConditionsEmpirical-Statical-Dynamical (ESD) Methodology for Extrapolation of Rock Mass Properties for Construction of TunnelsEnhanced Mualem-Van Genuchten Approach for Estimating Relative Soil Hydraulic ConductivityTwo-Component Incompressible Fluid Model for Simulating the Cohesive Soil ErosionLocal Data Flow Principles in Porosity of MaterialsInfluence of Chemical Additives on Radiation Stability of Concrete - Theoretical Basis and Evaluation MethodHeat Insulation Materials Based on CenospheresImproving the Durability of Protective Materials Based on Inorganic Binders when Exposed to Short-Wave RadiationApplication of Styrofoam in the Elements of Building ConstructionsDestruction of Monuments' Materials by Organic Acids ? Micromycetes MetabolitesTesting of the Mechanical Properties of Masonry Walls ? Determination of Compressive StrengthEffect of Air-Entraining Agent LHD on the Technological Properties of Concrete Mix Containing Superplasticizer S-3An Impact of Carbon Nanostructured Additives on the Kinetics of Cement HydrationThermal Cracking Resistance in Massive Concrete Structures in the Winter Building PeriodComparison of European and Russian Technical Documentation for Structural Use of ConcreteThe Influence of Based on Polyalcohols Additive on the Cement Paste ShrinkageProperty Changes of Thermal Insulation Material due to the Effects of Environmental ConditionsInfluence of Plasticizing and Siliceous Additives on the Strength Characteristics of ConcreteThe Influence of Precompression on Strength and Strain Properties of Concrete under the Effect of Elevated TemperaturesFiberglass Reinforcement for ConcreteFireproofing Cemented Fiber Vermiculite-Concrete Composites with Application Volcanic AshEffect of Modifying Admixtures on the Cement System Hydration KineticsShort-Time Creep of ConcreteKinetics of Hydration and Hardening Processes in Clinkerless Slag-Alkaline Binder MaterialsDependence of Relative Decreasing in Strength by Rate of Strain for the New Rapid Method for Determination of Concrete Frost ResistanceDevelopment of the Nanomodified Filler for Asphalt Concrete MixesOptimization of Provide Compositions Bitumen Emulsions, for Example the Cationic EmulsifierSalt Corrosion of Masonry MortarInfluence of Cladding Material on the Vapor Permeability of Lightweight Expanded Clay Aggregate (LECA) ConcreteUse of Epoxy Fluoroplastic Coatings in Friction Pendulum BearingsInfluence of Synthetic Fibers Dispersed Reinforced ConcreteAnalysis of Behavior of a Lattice Girder According to Theory of Plasticity with Link ElementsDetermination of the Critical Duration of the First Heating of Heavy Concrete by the Criterion of the Maximum Strength ReductionInfluence of High-Porous Filling Materials and Mineral Fiber on Thermal and Fire Resistant Properties of Aerated CompositesSpecial Aspects of Hydration Process of Microfine CementNovice Methodology in Preserving Prestressed Cables by Injection of a Special GelTheory and Practice of Functioning Machines for Vibratory AgitationConstruction of Road Embankment with Waste MaterialsApplication of Continuum Damage Mechanics Approach for the Strength Analysis of Reinforced Concrete ConstructionsApplication of Stepped Isothermal Method for Prediction the Creep Behavior of Extruded Polypropylene GeogridDesign of Lightweight Glass-Fibre-Reinforced Epoxy I-Beam for Structural ApplicationsModeling of Concrete Behavior under CompressionGeometrically Nonlinear Rods Theory - Comparison of the Results Obtained by Cosserat-Timoshenko and Kirchhoff's Rod TheoriesThe Effect of Weathering and Biological Exposure on the Tensile Properties of Nonwoven GeotextileDevelopment and Investigation of Mechanical Properties of Glass Fiber Reinforced ConcreteFinite Element Modeling of Steel Pipeline Reconstruction Using Fiberglass Composite MaterialTwo-Dimensional Surface Fatigue Crack Propagation and its Finite Element SimulationSimulation and Experimental Investigation of Deformation and Fracture of the MasonryBending of Laminated Composite PlatesA Posteriori Error Control at Numerical Solution of Plate Bending ProblemModeling Nonlinear Deformation and Destruction Masonry under Biaxial Stresses Part 1 ? Masonry as Simulation ObjectLocal Buckling of Cold-Formed Steel Members with Edge Stiffened HolesStrength Evaluation of a Linear Extended Structure on a Statically Inhomogeneous FoundationAdvanced Method for Semi-Rigid Joints DesignPrestressed Cladding Elements for Tensioned StructuresReticular-Stretched Thermo-Profile: Buckling of the Perforated Web as a Single PlateOptimization Models of Heat Treatment Process of Masonry in the Winter due to a Stationary Heating System Constructed Buildings Oil Production ComplexCalculation of Combined Structure and Installation Roof Systems Taking into Account Structural Nonlinearity FactorCrack Resistance Criteria for Reinforced Concrete Beams with Corrosion Damage in Strength Resource AssessmentMathematical Analogy between Non-Uniform Torsion and Transverse Bending of Thin-Walled Open Section BeamsComparison of the Bearing Capacity of LST- Profile Depending on the Thickness of its ElementsStrength and Stability of Arched Frame Structures Made of Brittle MaterialFriction of Rubber on the Concrete Surface Treated with a Remedy against Drying outThe Typical Roof Structure Project Based on Trusses Made of Roll-Welded RHS Pipes DevelopmentThe Computational Model of Spatial Formation of Cracks in Reinforced Concrete Constructions in Torsion with BendingProbable Errors of Dynamic Method at Conservative System Stability AnalysisJustification of Using Delta-Functions in the Theory of Shells Featuring IrregularitiesCalculation on Formation of Longitudinal Cracks in Reinforced Concrete Structures Taking into Account Nonlinearity of Concrete StrainingModeling Nonlinear Deformation and Destruction Masonry under Biaxial Stresses Part 2 - Strength Criteria and Numerical ExperimentQuadrilateral Finite Element for Analysis of Reinforced Concrete Floor Slabs and Foundation PlatesThe Optimal Control of the Elastic Stress State Using Boundary LoadsThe Analysis of Convergence of Finite Element Method for a Foundation Slab on the Bilinear SubgradeNew Numerical Methods for Structural Mechanics Problems in Unbounded DomainsCorrect Formulation of the Stability Problem for Timoshenko BeamThe Initial Boundary-Value Problem for a Mathematical Model for Granular MediumElasto-Plastic Stability Analysis of the Frame Structures Using the Tangent Modulus ApproachThe Algorithm of Solving the Problem of Large Elastic-Plastic Deformation by FEMDeterministic and Probabilistic Approach of Capacity of the Elements of a Lattice GirdMultimodal Pushover Analysis for R.C. BridgesComplex Testing and Rehabilitation Measures of the Bridges (Example of Road Bridge Across the South Morava, Serbia)Preparation, Installation and Signal Processing of Strain Gauges in Bridge Load TestingGeodetic Measurement of Vertical Displacements (Illustrated with the Slovenian Viaduct)On Strength Reserve Assessment for Prismatic Folded Plate Roof StructuresFinite Element Modeling of Porous Material Structure Represented by a Uniform Cubic MeshFinite-Element Simulation of Progressive Cross-Section Ellipticity of Single Crystal Samples under Uniaxial TensionExperimental Investigation and Finite Element Simulation of Fracture Process of Polymer Composite Material with Short Carbon FibersFracture Analysis of Piezoceramic CT-Specimen for Different Types of Crack Face Boundary ConditionsThermal-Fatigue Analysis of Turbine Discs under Complex Thermo-Mechanical Loading with Account of Plasticity and Creep EffectsComparison of Rate-Dependent Ferroelectroelastic Phenomenological Models for Prediction of PZT CreepAnalysis of Track Gauge Widening in Curves with Small RadiusPossibilities of Implementing Customer Relationship Management in the Function of Improving the Competitiveness of the Civil Engineering SectorRecourse Optimization of Construction on a Basis of the Frontal and Rhythmical StreamRenewal Methods of Construction Machinery According to Technical and Economic Indicators?Knowledge-Based Economics? in the Innovative Development of the Construction SphereNew Paradigm of Integrated Housing Development in the Metropolitan Area (Based on the Example of St. Petersburg)Time is the most Important Resource for Increasing Construction EfficiencyLogistics of a Building Company: Specifics and Methods of Logistics System ManagementQuasi Float Time Revealing when Evaluating Construction Schedules Based on DiscountingMethod ?Earned Value Management? for Timescale Controlling in Construction ProjectsEstimation of Economic Efficiency in Selection of Mast Hoist Equipment, Based on Technical CharacteristicsScheduling of Cottage Settlement BuildingResidential Stock Management Based on Input-Output Balance ModelClustering of City Housing Facilities Based on Self-Organizing MapsSpatial and Technological Design Principles of Mountain Resort HotelsRevitalization as the Principle of Architectural Heritage Protection ? Case Study of Serbia and RussiaAzerbaijan Hamam, the History and Restoration SpecificsWilliam Richard Lethaby ? Architecture, Mysticism and MythInvestigation of Natural Hazards: Theoretical and Practical ModelsArchitectural Renovation of Quarter in Mannheim, GermanyFormation of the Architecture of Developing Business Centers in Special Economic Zones with the Use of the Bio-Similar Modeling PrincipleLandscape Urbanism of Riverside Territories: Humanization StrategyOrientational Reaction as a Way of Adjusting to SpaceEfficiency of Implementation of Spatial Development Strategies on the Case of Business Zones in SloveniaDecentralization as a Cause of Spatial SegregationHouses New Live Build from 50s till 60s in Saint-PetersburgDaylight Factor Analysis for Different Types of Static Shading Devices: Case Study Location in PodgoricaRedevelopment Project of Shuvalovsky ParkReconstruction of Apartment in the Meltzer?s Apartment HouseArchitectural Tectonics as a ?Living Pattern? of Building StructuresRenovation of Multi-Apartment Building in LatviaReconstruction of Courtyards in Historical Buildings of Saint-Petersburg ? Ways to Improve Quality of Interior SpaceEvolution of Application of Neogothic Forms in the Russian Architecture of the XVIII-XIX CenturiesThe Sustainable Strategy of Obsolete Building Conversion to Residential UsesOptimizing Transport-Logistic Cluster Freight Flows of a Port Megacity on the Basis of GISDriver's Reaction Time in Evaluation of the Road CapacityOrigin-Destination Matrix as a Way to Create a Basic Algorithm for Simulation a Load of Transport NetworkAbout the Dynamic Model Formation of the Urban Livelihood System Compatible with the BiosphereReforms of St. Petersburg Municipal Services Regulatory Bodies in the First Half of XIX CenturyGrimShaw Proposal for Tirana River Shore Regeneration: Survival of the WaterfrontAnalysis of Compatibility of Contemporary Residential Housing in Nis with Current Standards in the Republic of SerbiaAssessment of Certainty of Ventilation Processes Mathematical ModelingModern Principles of Air Exchange Concept in Premises of Different PurposeSelection of Hot Water Supply Metering Devices for Residential BuildingsFeasibility Study of the Absorption Chiller IntegrationComparison of Air Conditioning Systems for Advanced Data CentersEconomic Efficiency of Automated Individual Heating Substation (IHS)Numerical Flows Recovery Analysis for Trunkline FailuresThe Air Consumption Estimation of Convection Heaters with Natural Convection and Water Heat CarrierModeling of Natural Gas Transportation and Distribution in Low Pressure Gas PipelinesCharacteristic Property of Adsorption Cleaning of Recirculated Air for Heat Chambers for Electric Testing of Electronic DevicesInspecting and Monitoring the Technical Condition of Sewage CollectorsOne-Sludge Denitri-Nitrification System Application in Reconstruction of Biological Treatment Stations in Russian FederationInnovative Environment Friendly Refurbishment Technologies for Water Supply and Sewage Systems of Sugar FactoriesWater Quality Improvement by Additional Filtering through Sorption Loading Modified by FullerenesDesigning Filtraring Equipment Forwater Wells of the Municipal Water Intakes in the City of KurskDetermination of Wastewater Purification Index under Joint Action of Several Pollution Sources in Marine Water AreasExperimental Modeling and Electrochemical Analysis of Salted Oily WastewatersEnergy Performance of Particle Settling in CyclonesThermal Comfort and Energy Performance Assessment for Residential Building in Temperate Continental ClimateThe Influence of the Thermal-Insulating Properties of External Enclosure Structures on the Energy and Opportunity CostsEnergy-Efficient Multi-Comfort Group of Buildings in Svetlorechenskiy EstateIncrease the Energy Efficiency of the Multi-Story Apartment BuildingThe Increase of the Thermal Shielding Level for a Residence Building of 1-528 KP SeriesDevelopment of Energy-Saving Measures for the Multi-Story Apartment BuildingsStudy of Operation of Power-Generating Devices of Gaseous Fuels CombustionNew Industrial Energy and Resource Saving Structural Solutions for Public BuildingsRenewable Sources in Passive SIP-HouseRating Energy Efficiency and Sustainability of Buildings by International StandardsResults of Multi Comfort Building DesigningIncreasing the Wind Turbine Power Using Aerodynamics Shape of the BuildingEnergy Efficient Solutions of Power Supply in North RegionsSustainable City Development: Implementation Practices in RigaThermal Insulation Features of Residential Historical Buildings in the Case of Saint-PetersburgEnergy Efficiency of Single-Family Houses in Serbia and Montenegro: Strategy for Upgrading the Performance of Existing StockThe Role of the State and Citizens to Improve Energy EfficiencyEstimation of Industrial Wastewaters Treatment Efficiency by BiotestingEnergy-Efficient Modernization of the Nobel?s Mansion in Saint Petersburg: Solar Energy Supply PotentialEnergy-Plus House for the Climatic Conditions of MacedoniaImpact of Thermal Insulation and Type of Windows on Energy Demand of Buildings with Passive House StandardClimate Changes in the Light of Relation between Highly Developed Countries and the Rest of the WorldDefinition of Climatic Parameters for Calculation of Energy Performance of BuildingsStructural Design of Energy Efficient Buildings Using Multi-Objective BB-BC AlgorithmPassive Solar Heating: Its Role in Architectural ShapingThe Study of Humidity Conditions of the Outer Walls of a ?Passive House? for the Climatic Conditions of Serbia, City NisNearly Zero-Energy Buildings: Optimal Cost of Minimum Energy RequirementsHeat Balance Method Application in Building Energy Performance SimulationThe Architectural Concept of the Building with Low Energy ConsumptionAnalysis of Micro CHP Potential in LatviaLaboratory Experiments on the Measurement of the Greenhouse Gases Concentration at the Water-Air Interface by Using a Floating Gas Box MethodModel Calculation of Energy Carriers Expenses on the Basis of Biogas in System Reformer - Fuel Cell for Autonomous Power Supply SystemsDistance Learning System Moodle for Training of Specialists in the Field of Civil EngineeringAutodesk Revit - Key to Successful Training of Highly Qualified Civil EngineersThe Benefits of Authorized Training Center Autodesk for Higher Education InstitutionsAn Update Procedure of Basic Education Programmes in St. Petersburg Polytechnic UniversityResults of the Admission Campaign: Which is the Future Specialist in the Field of Civil Engineering?The Role of the Future Civil Engineers' Motivation in the Foreign Language Learning
