Sonstiges, Englisch, 1300 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, 1300 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-908452-86-7
Verlag: Trans Tech Publications
The 200 peer-reviewed articles in this ?Nanomaterials by Severe Plastic Deformation? special collection are a convincing demonstration of the relevance of bulk ultrafine grained and nanostructured materials, produced by severe plastic deformation, to a wide range of researchers and engineers., The total number of articles in this edition, larger than that in the 2008 edition, shows that this community is, in fact, growing. The coverage includes all aspects of NanoSPD: Principles of SPD Processing, Microstructural Evolution and Grain Refinement, Mechanical Properties of SPD Materials, Functional and other Properties of SPD Materials, Innovation and Applications.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Major Landmarks of NanoSPD Activity: International Conferences from NanoSPD1 to NanoSPD5Processing by Severe Plastic Deformation: Historical Developments and Current ImpactNanostructure Formation and Amorphization in Intermetallic Compounds by Severe Plastic DeformationSevere Plastic Deformation Processes with Friction Induced ShearTwist Extrusion: Fundamentals and ApplicationsEqual-Channel Angular Pressing of NiAlStrain Compatibility and Nanostructuring of Bulk Metallic Materials via Severe Plastic DeformationHigh-Pressure Torsion for Ring Samples in Different ThicknessesComparison of Different Extrusion Methods for Compaction of PowdersNanostructured Dual Phase Ti-Al through Consolidation of Particles by Severe Plastic DeformationEffect of a Special ECAP Die Configuration on Microhardness Distributions in Pure AluminumFinite Element Simulation of Die Design for Warm Equal Channel Angular Extrusion Process of AZ31 Alloy and its Experimental InvestigationFinite Element Simulation of Effects of Mould Angle and Friction on ECAP for AZ80 Magnesium AlloyNano-Refinement, Nano-Consolidation: Different Fabrication Routes of Nano-Crystalline Aluminium AlloysApplication of High-Pressure Sliding for Grain Refinement of Al and Mg AlloysSimple Shear: Double-Stage DeformationSevere Plastic Deformation by Equal Channel Angular SwagingStudy on the Fabrication of Nanocrystalline Copper by Explosive Dynamic LoadingSimulation of Multi-Pass ECAP by 3D Finite Element MethodCurrent Practice and Future Opportunities for Two-Turn ECAPThe Novel Continuous Large Deformation Technology Integrating Conventional Rolling with Equal-Channel Angular TechnologyInfluence of ECAR Processing on OFHC Cu Material PropertiesExperimental Studies and Modelling Analysis of Commercial Purity Iron Processed by Asymmetric RollingAg Powders Consolidated by Reciprocating Extrusion (CEC)Nanocrystallization and Dissolution of Immiscible Powder Alloys Using High Pressure TorsionEffect of Severe Cold-Rolling and Subsequent Annealing on Microstructure and Properties of in-Situ Composite SteelEffect of Combined Rolling Processes on Structure and Mechanical Properties of Pure Titanium RodsAtomic Scale Investigation of Impurity 3D Distribution in Nanocrystalline Ni Processed by SPDMicrostructure Evolution and Tensile Properties of 304L Stainless Steel Subjected to Surface Mechanical Attrition TreatmentGrain Size Effect on Deformation Twinning and De-Twinning in a Nanocrystalline Ni-Fe AlloyX-Ray Analysis of a and ? ? Phases of Ti, Subjected to High-Pressure TorsionMicrostructure and Properties of T2 Copper Tube Produced by Severe Hot RollingObtaining a Homogeneous Fe-C Nanostructure from a Ferritic-Pearlitic Dual-Phase Steel by High Pressure TorsionDisorientations after Severe Plastic Deformation and their Effect on Work-HardeningAnnealing Behavior of Solution Treated and Aged Al-0.2wt% Sc Deformed by ARBMicrostructure and Mechanical Properties of Accumulative Roll Bonded AA6014/AA5754 Aluminium LaminatesMicrostructural Evolution in an Al-6061 Alloy Processed by High-Pressure Torsion and Rapid AnnealingMicrostructure and Properties of a Fe-Cu Composite Processed by HPT Powder ConsolidationQuantitative Characterization of Microstructure in Copper Processed by Equal-Channel Angular PressingInfluence of the Precipitation State on Thermal Stability of an Ultra-Fine Grained AlMnFe-Alloy Produced by Equal Channel Angular PressingStructural Evolution on the Cross-Section of an AZ31 Magnesium Alloy Processed by High-Pressure TorsionInvestigations on Microstructure Evolution and Deformation Behavior of Aged and Ultrafine Grained Al-Zn-Mg Alloy Subjected to Severe Plastic DeformationAging Behavior of Al-Mg-Si Alloys Processed by High-Pressure TorsionGrain Boundary Segregation of Carbon and Formation of Nanocrystalline Iron-Carbon Alloys by Ball MillingTexture Evolution in Pure Copper Processed by Equal Channel Angular Extrusion with Extended Processing RoutesThe Evolution of Homogeneity during Processing of Aluminium Alloys by HPTOn the Theoretical Limits of Microstructure Evolution in Severe Plastic DeformationEffect of Multiaxial Forging on Structure Evolution and Mechanical Properties of Oxygen Free CopperEffect of Cold Rolling on Structure and Mechanical Properties of Copper Subjected to Different Numbers of Passes of ECAPStructure and Properties of Ultrafine-Grained Cu-Cr Alloys after High Pressure TorsionAging Behavior of Cu-Ni-Si Alloy Processed by High-Pressure TorsionAnnealing Behavior of FeNi Alloy Processed by High-Pressure TorsionMicrostructure Evolution of Pure Nickel up to a High Strain Level during Equal-Channel Angular PressingThe Evolution of Structure and Mechanical Properties of Fe-Mn-V-Ti-0,1C Low-Carbon Steel Subjected to Severe Plastic Deformation and Subsequent AnnealingEnhanced Thermal Stability and Mechanical Properties of Ultrafine-Grained Aluminum AlloyMicrostructures and Mechanical Properties of Pure Titanium by Dynamic Plastic DeformationA Study on Characteristics of Microstructures and Orientations of UFG Materials Prepared by SPDRecrystallization Mechanisms Leading to the Formation of Nanoscale Grains in a Ni-20%Cr Alloy Subjected to Intense Plastic DeformationMicrostructure and Texture of Magnesium Single Crystals Processed by ECAPMartensitic Transformation from Ultrafine Grained Austenite Fabricated by ARB in Fe-24Ni-0.3CNumerical Simulation and Experimental Investigation of Grain Refinement Behavior in Equal Channel Angular Pressing/Extrusion ProcessGrain Subdivision of a Nb Polycrystal Deformed by Successive Compression TestsInfluence of Stacking Fault Energy on the Microstructures and Grain Refinement in the Cu-Al Alloys during Equal-Channel Angular PressingThe Influence of Texture and Grain Size on Compressive Deformation Behavior of Pure Mg through Equal-Channel Angular ProcessingMicrostructural Evolution of Mg-4Nd Alloy Processed by High-Pressure TorsionDeveloping the Technique of Severe Plastic Deformation Processing through High-Pressure TorsionHigh-Temperature Severe Plastic Deformation of Ferritic Steel by TorsionThe Structure of Nb Obtained by Severe Plastic Deformation and its Thermal StabilityMicrostructural Evolution of Ultrafine-Grained Steel during Tandem Rolling ProcessMicrostructures and Tensile Properties of Maraging Steel Processed by Equal-Channel Angular PressingStabilization of Lattice Defects in HPT-Deformed Palladium HydrideMicrostructure and Properties of Nanostructured Zirconium Processed by High Pressure TorsionMechanisms of Microstructure Refinement in Titanium during ?abc? Deformation at 400?CTexture Manipulation in Commercial Purity Aluminum by Deformation Path Change from ECAP to Plane Strain CompressionTEM and DSC Investigation of the Recovery of a Recycled Aluminum Processed by Equal Channel Angular ExtrusionMicrostructure and Mechanical Performance of AZ31-1.7 Wt.% Si Alloy Processed by Cyclic Channel Die CompressionEnhancing the Efficiency of ECAP Processing in Particle Redistribution by Combination of Different Processing RoutesDecomposition of Nanostructured Martensite in Cu-Al Alloys Processed by High-Pressure TorsionMicrostructure and Toughness of an AZ80 Mg Alloy Processed by ECAP and Ageing TreatmentThe Mechanical Performance of ARB Fabricated Hybrid Lamellar Composite of Recovered/Recrystallized Al and Precipitation Hardened Al(Sc) LayersDevelopment of Ultra-Fine Grained Structure in an Al-5.4%Mg-0.5%Mn Alloy Processed by ECAPMicrostructure Evolution in a Cu-Ag Alloy during Large Strain Deformation and AnnealingGrain Refinement and Hardening Induced by Heavy Deformation Using Low Energy High Current Pulsed Electron Beam Surface TreatmentSynergetic Effect of ECAP and Friction Stir Welding on Microstructure and Mechanical Properties of Aluminium SheetsMechanism Responsible for Dynamic Recrystallization for Repeated Plastic Working Deformation ProcessDispersion of the Structure in Al-Based Alloys by Different Methods of Severe Plastic DeformationProcessing and Characterization of Pure Nickel Sheets by Constrained Groove Pressing (CGP) TechniqueMicrostructure of Pure Ni Subjected to High Pressure TorsionEffect of ECAP on the Dimensional and Morphological Characteristics of High Performance Aluminium PM AlloyMicrostructure and Properties of Cu-5.7%Cr In Situ Fibrous Composite Produced by Equal-Channel Angular Pressing and Cold RollingMicrostructure and Mechanical Properties of Ultra-Fine Grain AZ80 Alloy Processed by Back Pressure Equal Channel Angular PressingNanostructure Evolution in an Austenitic Stainless Steel Subjected to Multiple Forging at Ambient TemperatureMechanical Properties and Microstructures of Severely Plastic Deformed Pure Titanium by Mechanical Milling and Spark Plasma SinteringThe Formation of Submicrometer Scale Grains in a Super304H Steel during Multiple Compressions at 700?CProcessing of Ultrafine Grained Cu-30%Zn Alloy through Severe Plastic Deformation Using Accumulative Roll BondingThe Evolution of Texture in AA 1050 Alloy Deformed by Equal-Channel Angular PressingProduction of Bulk Ultrafine Grained Steel through Severe Plastic DeformationAnomalous Property Evolution during Annealing in HPTed SUS 304 Austenitic Stainless SteelGrain Refinement and Dispersion Precipitation of I-Phase in Mg-Zn-Y Alloy Processed by ECAPEffect of Severe Plastic Deformation on Microstructure and Properties of Al-Cu-Mg-Ag Aluminum AlloysEffect of Ultrasonic Treatment on the Microstructure and Properties of Nanostructured Nickel Processed by High Pressure TorsionEffect of Asymmetrical Accumulative Roll-Bonding and Heat Treatment on the Formation of Ultra-Fine Twin CopperMechanism of Grain Refinement Induced by Severe Plastic DeformationGrain Refinement in AZ61 Mg Alloy during Hot Cyclic BendingEvidence of Bulk Nanostructuring in Zr-Based Alloys under Deformation at Temperatures of a?? Phase TransformationsNano-Crystalline Structure in Mg2Si/Mg-2.5Er-5Zn Composite on the Route of Repeated Plastic Working ProcessResearch on Temperature Change and Microstructure Evolution of Bore in Steel Target Penetrated by Copper JetsCooperative Grain Boundary Sliding and Shear Banding at High Strains in Ultrafine Grained and Nanocrystalline Pd AlloysEffect of Hydrostatic Pressure on the Microstructure and Mechanical Properties during and after High Pressure TorsionSPD-Induced Grain Boundary Segregations and Superior Strength in UFG Al AlloysAn Overview on the Fracture Behavior of Metals Processed by High Pressure TorsionThe Effect of Grain Boundary Sliding and Strain Rate Sensitivity on the Ductility of Ultrafine-Grained MaterialsCorrelation of Physical Parameters with Steady-State Hardness of Pure Metals Processed by High-Pressure TorsionMechanical Properties of Al-6061 and an Al-6061 Metal Matrix Composite Processed by High-Pressure TorsionMechanical Characteristics of Zn-22% Al and Al-3% Mg Alloys Processed to High Strains by ECAPStrengthening and Toughening Effect on Tungsten Subjected to Multiple ECAPStrain Rate Sensitivity of Ultrafine-Grained CP-Ti Processed by ECAP at Room TemperatureMechanical Properties of Different Coppers Processed by Equal Channel Angular PressingContribution of Twins to the Strengthening of Commercial Purity Titanium after Equal-Channel Angular PressingInfluence of Nanoparticle Reinforcement on the Mechanical Properties of Ultrafine-Grained Aluminium Produced by ARBInfluence of Severe Plastic Deformation and Ageing on the Microstructure and Mechanical Properties of ?-Alloy Ti-6.8Mo-4.5Fe-1.5AlStrengthening of CP-Ti by Rolling at Room TemperatureApplication of High-Pressure Torsion to Al-Si Alloys with and without Scandium AdditionsMechanisms of Deformation Behavior of Coarse-Grained and Ultrafine-Grained TiHigh Strength and Electrical Conductivity of UFG Copper AlloysEvolution of Adiabatic Shear Band in Ultra-Fine-Grained Iron under Dynamic Shear LoadingMicrostructure and Mechanical Properties of Mg-3Y Binary Alloy Processed by Cyclic Extrusion and CompressionUsing Atomic Force Microscopy to Examine Flow Processes in Materials Processed by ECAPCP-Ti Processed for Multiple Passes by ECAP at Room TemperatureInfluence of the SPD Processing Features on the Nanostructure and Properties of a Pure NiobiumInvestigation on Three-Dimensional Microstructures and Tensile Properties of Pure Iron during Equal-Channel Angular PressingEffect of Impurities on the Microstructure of HPT Deformed NickelOptimization of Tensile Strength and Ductility of Grade 2 Ti, Conditioned by Severe Plastic DeformationInfluence of Strain Reversals during High Pressure Torsion Process on Strengthening in Al-Cu-Mg(-Li) AlloyMechanical Properties of an Al-5.4%Mg-0.5%Mn-0.1%Zr Alloy Subjected to ECAP and RollingMicrostructure Stability and Creep Behaviour of a Cu-0.2wt.%Zr Alloy Processed by Equal-Channel Angular PressingTemperature Effects on the Mechanical Behavior of Ultrafine-Grained MaterialStatic and Cyclic Deformation of Commercially Pure Al Processed by Equal-Channel Angular Pressing Using Two RoutesEnhancing Strength and Maintaining Ductility of Mg-3%Li-1%Sc Alloy by Equal Channel Angular PressingComparison of High-Temperature Compressive Deformation Characteristics of Differently Processed LY12 Aluminum AlloysDistribution of Mechanical Properties by Volume in Titanium Billets Processed by Twist ExtrusionMechanical Spectroscopy of Ultrafine Grained CopperUltrafine-Grained Steel Produced by Warm Rolling and Annealing of Lath MartensiteFlow Behaviour of Commercial Purity Titanium Subjected to Equal Channel Angular PressingNear-Threshold Fatigue Crack Propagation in an ECAP-Processed Ultrafine-Grained Aluminium AlloyEffect of ECAP on the Microstructure and Mechanical Properties of 17-4PH Stainless SteelPrecipitation Effect on Work Hardening Behavior of ECAP-Deformed Al-4%Cu AlloyThe Dynamic Behavior of Ultra-Fine-Grained Copper Fabricated by Equal Channel Angular PressingEffect of Equal-Channel Angular Pressing on the Creep Resistance of Precipitation-Strengthened AlloysUltrafine Structure Formation in Aluminium Alloy Processed by HPT and the Mechanical Properties ResponseProduction a High-Strength and High-Conductivity Copper Wire by Using Equal-Channel Angular Hydroextrusion MethodStructure Evolution and Deformation Mechanisms in Ultrafine-Grained Aluminum under Tension at Room TemperatureMicrostructure and Strength of Welded Joints of Steel after Equal-Channel Angular PressingStructure and Hardness of Cryorolled and Heat-Treated 2xxx Aluminum AlloyEffect of ECAP on Mechanical Properties of an AA2014 AlloyOptimization of Strength and Ductility in Ultra-Fine 304 Stainless Steel after Equal-Channel Angular ProcessingInfluence of Annealing on the Structure and Mechanical Properties of Ultrafine-Grained Alloy Ti-6Al-7Nb, Processed by Severe Plastic DeformationEffect of ECAP on Microstructure and Mechanical Properties of an Al-Mg-Sc AlloyTransient Yielding during Compression Tests on ECAP?ed AA1050 AluminiumPrediction of the Tension/Compression Asymmetry of ECAP Processed FCC Material Using an Integrated Model Based on Dislocation and Back-StressEffect of ECAP on Mechanical Properties of an Al-Cu-Mg-Ag-Sc AlloyMechanical Properties and Microstructure of a Duplex NanostructureHot Workability of Ultrafine-Grained Aluminum Alloy Produced by Severe Plastic Deformation of Al6063 Powder and ConsolidationInfluence of Thermal Cycling on Dilatation and Electrical Resistance of Ti - 49.8 at. %Ni Alloy after Hot RollingOn Gradient Nanomechanics: Plastic Flow in NanopolycrystalsCharacterization of AM60 Magnesium Alloy Prepared by Rapid Solidification and Plastic Consolidation TechniqueInfluence of Stacking Fault Energy on the Mechanical Properties and Work Hardening Behavior of Ultra-Fine (UF) Grained Cu and Cu AlloysEffect of Post Annealing Treatment on Nano-Structured Low Carbon Steel Sheets Processed by Constrained Groove PressingEnhanced Plasticity of Cu-Based Laminated Composites Produced by Cold Roll-BondingInfluence of Dissolved Precipitated Phases on Mechanical Properties of Severely Deformed Al-4 Wt% Cu AlloysFatigue Properties of Rapidly Solidified Mg-6Zn-1Y-0.6Ce-0.6Zr Alloy Processed by Reciprocating ExtrusionMicrostructure and Mechanical Properties of an AZ31 Magnesium Alloy Processed by Accumulative Back Extrusion (ABE)Superplastic Flow of Metals Extruded by KoBo MethodHydrogen Activation Behavior of Commercial Magnesium Processed by Different Severe Plastic Deformation RoutesHydrogen Sorption Properties of the Complex Hydride Mg2FeH6 Consolidated by HPTPhase Transformations and Functional Properties of NiTi Alloy with Ultrafine-Grained StructureHysteresis Magnetic Properties of Nd-Ho-Fe-Co-B Alloys after Intense Plastic DeformationEffect of Equal-Channel Angular Pressing on the Microstructure and Superelastic Behavior of Ti-25 at. % Nb Shape Memory AlloyEffect of the High Pressure Torsion on Magnetic Properties of Amorphous AlloysElectrochemical Properties of UFG CP-Ti in Ringer?s SolutionImpact of Ball Milling and High-Pressure Torsion on the Microstructure and Thermoelectric Properties of p- and n-Type Sb-Based SkutteruditesWear Resistance of SPD-Processed AlloysWear Behaviour of Al-1050 Alloy Processed by Severe Plastic DeformationSliding Wear Behavior of Severely Deformed 6061 Aluminum Alloy by Accumulative Roll Bonding (ARB) Process
In Vitro Corrosion and Haemocompatibility of Bulk Nanocrystalline 304 Stainless Steel by Severe RollingThe Effect of Structure on Mechanical and Corrosion Properties of Austenitic Steel Subjected to Neutron IrradiationInvestigation on Corrosion Behaviors of Ultra-Fine Grain Copper in 3.5% NaCl SolutionOverview on the Corrosion Behavior of Ultra-Fine Grained Materials Fabricated by Equal-Channel Angular PressingPhase Transformations and Super-Elasticity of a Ni-Rich TiNi Alloy with Ultrafine-Grained StructureStatus of Commercialization of Nanostructured MetalsMicrostructural Features and Mechanical Properties after Industrial Scale ECAP of an Al 6060 AlloyDevelopment of SPD Technologies and Establishment of a Production Line for Rod-Shaped Semiproducts out of Nanostructured Titanium for Medical ApplicationEvolution of Microstructure and Mechanical Properties of Titanium Grade 4 with the Increase of the ECAP-Conform PassesInterface Microstructure of Diffusion Bonded Fe3Al/Al with Ultrafine Grain LayerRecycling of Aluminum Scrap by Severe Plastic DeformationThe Aspects of Practical Application of Ultrafine-Grained Titanium Alloys Produced by Severe Plastic DeformationDevelopment of Textured Coated Superconductor Substrate Tapes by Severe Plastic Deformation ProcessingMicrostructure Evolution and the Influence of Hydrofluoric Acid Treatment on the Surfaces of Commercial Pure Ti after ECAETowards Perspective Applications of Nanostructured Ti in MedicineAnnealing Effect on the Performance of Sputtering Deposited Metglas Thin Films
