Selected, peer reviewed papers from the 2013 2nd International Conference on Energy and Environmental Protection (ICEEP 2013), April 19-21, 2013, Guilin, China
Buch, Englisch, 1840 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 3370 g
ISBN: 978-3-03785-741-0
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Conference Organization
Chapter 1: Development and Utilization of Solar Energy
A Power Prediction Method for Photovoltaic Power Station Based on Neutral Network Using Numerical Weather Information
A PV Cell Mathematical Model and MPPT Algorithm in PSCAD
A Simple and Accurate Modeling Method for Photovoltaic Cells Using Explicit Equations
Application of Prediction Algorithm of Photovoltaic Power in Distributed Photovoltaic Volatility Control
Application of Solar Energy and Gas Compound Hot Water Supply Technique
Application of Solar Energy Integration Technology in Metallurgy
Comprehensive Utilization of Solar Energy and Building Energy Saving
Design and Implementation of Dual-Axis Solar Tracking System with GSM Fault Reporting Capability
Exploration of Composite Solar and Wind Power Generation Device Control
Optimal Design for Photovoltaic and Photothermal Hybrid Solar Cells of Solar Powered Aircraft
Preparation of Anodic Aluminum Oxide Nano-Templates on Polycrystalline Silicon Substrates
Research of the Model and MPPT Algorithm of Solar Cells
Research on Control Simulation of Photovoltaic Power Generation System Based on MPPT
Research on Mode of Solar Automatic Tracker
Research on the Angle of Quasi-Fixed Solar Collector
Synthesis of Mixed TiO2-Rare Earth Up-Conversion Material and Application in the Dye-Sensitized Solar Cells
The Design of Remote Analysis and Control for Photovoltaic System Based on Computer Software
The Performance of Thermal Storage Tank in Solar Energy System
The Analysis of Solar-Earth Source Heat Pump Combined Operating
Study of MPPT Simulation Based on Power Prediction Method and Variable Step Incremental Conductance Method
Modeling and Control Technology of the Z-Source Inverter PV Grid-Connected System in the New Energy Equipment
A Photovoltaic and Commercial Power Complementary Hybrid System for University Classroom Energy-Saving Lighting
A Study of the Reliable Receivers for Dish/Stirling Solar Electric Generating System
Asymmetric Voltage Sag Control Strategy for Grid-Connected PV System Based on PIR Controller
Calculation and Distributive Characteristics of Solar Radiation in Henan Province
Design and Implementation of a High Power Battery Charger of a Hydroelectric-Connected PV Plant
Design Methods of the Space Photovoltaic Support
Effect of Solvent Annealing for Efficient Polymer Solar Cells
Effects of Progressive SiNx Films on the Performance of Polycrystalline Silicon Solar Cells
Exergetic Analysis of a Solar Thermal Power Plant
Experimental Research on a Novel Solar Water Heating System by Using Loop Heat Pipe
Key Technologies Research of New Generation Concentrating Photovoltaic
Preparation and Optical Properties of Gallium-Titanium Codoped Zinc Oxide Transparent Conductive Films for Solar Cells
Research Progress of Solar Pond Technology
Study on Single-Axis Tracking PV System Measurement
Study on the Output Power of the PV Power Plant Model Based on ANFIS
The Research and Design of Automatic Tracking System of the Light Based on the LOGO Controller
The Status and Trends of Crystalline Silicon PV Module Recycling Treatment Methods in Europe and China
Chapter 2: Development and Utilization of Biomass Energy
Acid-Alkaline Two-Stage Pretreatments of Corn Stover for Enhancing Enzymatic Saccharification
Analysis on Biomass Resources and Potential of Developing Biomass Energy in Yunnan Province
Comparison of Different Pretreatment Methods to Increase Hydrogen Production from Cornstalk
Comparison of Methods of Wood Chip Moisture Evaluation
Conversion of Fructose to 5-hydroxymethylfurfural Catalyzed by Coaled Carbon-Based Solid Acid
Effect of Acid Curing Agent on the Foaming of Liquefied Bamboo-Based Resol Resin
Electric Heating Biogas Digester Experimental Research and Numerical Simulation of Fluent
Experiment Research and Mechanism Analysis on the Thermal Properties of Solar Anaerobic Digester
Experimental Investigation of Biomass Slag Deposit on the Surface of Super-Heaters
Experimental Study on Oxygen-Enriched Combustion Characteristics of Pure Cotton
Freeze-Thaw and Sulfuric Acid Pretreatment of Wheat Straw for Fermentable Sugar Release
Improving Calorific Value and Reducing Corrosiveness of Biological Oils
Key Factors of Thermal Efficiency Test Protocols for Household Biomass Cookstoves
New Biogas Heater Burner 3D Virtual Design
Optimizing the Formula for Rice Husk Pellet Fuel Using Orthogonal Array Testing
Research on Optimization Model of China's Bio-Fuel Ethanol Subsidy
Single Cell Oil and Lipid-Producing Microorganism
Study on Biomass Carbonization for Bio-Char Production
Study on Drying Characteristics of Microalgae under Different Conditions
Study on Mechanism of Low Temperature Co-Pyrolysis of Duckweed and Flame Coal
Study on the Conditions of Straw Powder Degradation to Produce Reducing Sugar in Mixed Cultivation
Study on the NaOH Modified Bagasse as Briquette Binder
Syngas Production from Biomass Gasification Using Copper Slag Catalysts
The Advancement of Algal Biomass: A Review
The Effect of Light on the Growth and Product Accumulation of Chlorella
The Interaction Mechanism of Biomass and Coal Co-Gasification
The Study of Oxidative Stability of Castor Oil Based Biodiesel
Experimental Study on Combustion Characteristics of Biomass Charcoal in Air and O2/CO2 Atmosphere
Analysis of Chemical Constituents of Volatile Oil Fruit of Cinnamomun amphora(L.)Presl GC-MS
Analysis of Environmental Cost Accounting of Forest Biomass Power Generation
Base-Catalyzed Transesterification of Soybean Oil by Ultrasonication
Biohydrogen Production by Co-Fermentation of Starch Wastewater and Sludge under Thermophilic Condition
Conversion of Glucose into 5-Hydroxymethylfurfural with WO3 - MoO3 Mixed Metal Oxides
Effect of Acetic Acid on Ethanol Fermentation by Engineered Escherichia coli SZ470
Effects of Urea Treatment on the Structure and Properties of Wheat Straw
Establishment of Methanogenesis Dynamics Model in the Process of Methane Fermentation with Manure Wastewater
Improving Biogas Production and Biodegradability of Acid Hydrolytic Cotton Stalk with Addition of Nutritive Salts and Complex Anaerobic Cellulose Decomposing Bacteria
Optimization of Simultaneous Saccharification and Fermentation for Ethanol Production from Steam-Exploded Cotton Stalk
Pentosan Extraction from Poplar Treated by Green Liquid
Physico Chemical Analysis of Linseed Oil and its Blends as a Potential Fuel for Diesel Engine
Preparation of Small Molecular Hemicelluloses from Coconut Shell
Selective Pyrolysis Behaviors of Willow Catalyzed via Phosphoric Acid
Solid Super Acid Base Co-Catalyzed Transesterification of Soybean Oil Using Ultrasonication
Study on Ethanol Production from Sweet Sorghum Straw
Study on the Characteristics of the Aquatic Vegetables Waste Fermentation to Biogas
The Biological Sources of the Organic Matter in Poyang Lake Sediments
The Cultivation Technique for Increasing the Stalk Sugar Content of Energy Plant Sweet Sorghum in Yellow River Delta
Elevated N Supply Reduces the Inhibition of Growth and Photosynthesis Caused by Salinity in the Bioenergy Plant Hybrid Pennisetum
Study on Characteristics of Ammonium Nitrogen Adsorption by Biochar Prepared in Different Temperature
Chapter 3: Development and Utilization of Wind Energy
Direct Drive Permanent Magnet Synchronous Wind Generator Maximum Power Tracking Control
A Wind-Thermal Hydropower Coordination Control Strategy Based on Multiple Constraints of Large-Scale Wind Power Integration
An Investigation of the Low Performance of the First Wind Farm in Thailand: A Case of Poor Wind Turbine-Site Matching
Development of a Wind Power Generation Experiment Device
Improve the Forecast of Surface-Layer Wind in Wind Power Farm with WRF-3DVAR
Mechanism of Large Scale Cascading Trip-Off of Wind Turbine Generators
Modeling and Simulation of the Brushless Double Rotor Motor for the Novel Wind Power Generation System
Offset-Free Model Predictive Control for Wind Power Generation Systems
Study on Different Impacts on the Reliability of Grid Connecting with the Offshore and Onshore Wind Farms
The Dynamic Interactional Model of SVC and DFIG to Maintain Grid Voltage
The Wind Power Industry in China: Status and Issues
Vibration Analysis on the Megawatt-Class Wind Turbine Based on the Rigid-Flexible Coupling Model
Peak-Load Regulating Adequacy Evaluation in Wind Power Accessed System Considering the Correlation of Wind Farms
A Study on Water Pumping by Using a Small Multi-Blades Windmill for Used in a Remote Area
China Wind Power Development Status and Trends
Control Strategy of Wind Turbine Power Limitation under High Winds
Coordinated Control of Large Scale Offshore Wind Farms Integrating into VSC-HVDC System
Detection of Flicker Caused by Wind Farm Based on Mathematical Morphology Filter and Hilbert-Huang Transform
Fuzzy Comprehensive Appraisal of China’s Offshore Wind Industry Competitiveness Based on SWOT
Modeling and Simulation of Variable-Pitch Wind Power Generation System
Numerical Simulation of Influence with Surface Contamination on Aerodynamic Performance of Dedicated Wind Turbine Airfoil
Optimal Configuration Method of Hybrid Energy Storage System for Wind Farm
Probabilistic Available Transfer Capability Calculation of Wind Farm Incorporated Power System
Reliability Assessment of Power Generation and Transmission System Considering Wind Farm Based on Monte-Carlo Methods
Research on Fault Diagnosis Method of Wind Turbine Based on Wavelet Analysis and LS-SVM
Research on the Compensation Coefficients of the Improved MPPT Control Based on Reduction of Tracking Range
Research on Wind Turbine Control System Based on CAN Bus
Running State Study on Wind-Driven Generator Gearbox
Strength Analysis of Bolt Connection on Yaw Gear of the MW Wind Turbine Generator System
Study of Reactive Power Compensation for Improvement of Low-Voltage-Ride-Through Capability of Wind Farm
Study on Wind Speed Forecasting Based on STC and BP Neural Network
The Application of Energy Storage System in Wind Power Integration
The Coordination Control Method of Dynamic Reactive Power Compensation Equipment Based Multi-Objective
Wavelet Packet Diagnosis for Wind Turbine and Vector Control for Wind Power Generation System
Performance Research on Tension Leg Platform of Floating Offshore Wind Turbine
Application of Portfolio Theory Based on CVaR in Determining Optimal Spinning Reserve with Consideration of Load and Wind Power Uncertainties
Application of Power Communication System in Wind Power Plant
Impact of Large-Scale Integrated Wind Farms on the Voltage Stability of Regional Power System
Reserve Capacity Optimization of the Regional Power System with Wind Farms
Wavelet-ARMA Model Revised by Neural Network to Predict Wind Power
Chapter 4: Nuclear Energy and Nuclear Engineering
A Conceptual Study on Helium-Cooled Solid Breeder Blanket for Prototype CH DEMO
Optimization Design and Analysis for the First Wall of CH HCSB TMB Based on Thermal Hydraulic
The Experimental Research on Uniformity of Argon Inductively Coupled Plasma at Different Cylinder Heights
Analysis of the Safety of Nuclear Power Plants
Design and Numerical Analysis of Oil-Cooled Cooler of Liquid Lead-Bismuth Loop
Sustainable Development of Nuclear Energy and Study on ADS in China
Technology Selection for Emergency Radioactive Wastewater Treatment
Chapter 5: Hydrogen, Fuel Cell and Related Technologies
Challenges Facing Hydrogen Fuel Cell Technology to Replace Combustion Engines
Effects of CO on Performance of HT-PEM Fuel Cells
Hydrogen Production from Ethanol Steam Reforming over Co-Ni/CeO2 Catalysts Prepared by Coprecipitation
Investigation into Hydrogen Production in Hydrolysis of Sodium Borohydride in the Presence of Co-La-B Catalyst
Preparation of CuO-Decorated Core-Shell Montmorillonite-TiO2 Colloids and their Photocatalytic Activity for Hydrogen Evolution from Water
Sulfonated Polyphosphazene-Montmorillonite Hybrid Composite Membranes for Fuel Cells
Visible Light Photocatalytic Hydrogen Evolution from Water Reduction Using Eosin y Containing Trace Vitamin B12 as a Light Harvesting Unit
CFD Investigation into Internal Flows of PEM Fuel Cell for Optimal Performances
Effect of Different Operating Conditions on MFC Performance
Hydrogen Production via Sorption Enhanced Steam Reforming of Acetic Acid: A Thermodynamic Study
Investigation into the Catalytic Ability of Fibrillar Co-Y-B Catalyst in Hydrogen Production from Hydrolysis of Sodium Borohydride
Performance Study of Direct-Boron-Hydrogen Fuel Cells (DBFC) Applied in Micro Power Systems
A µDMFC Stack with Hybrid Mass Transportation Scheme
Chapter 6: Storage Battery and Other Energy Sources
Discussion on the Li-Ion Battery Health Monitoring and Remaining-Useful-Life Prediction
Thermal Security Analysis of Lithium-Ion Batteries Based on Electro-Thermal Modeling
Microwave Synthesis of MnO2/C and its Applications in Zinc-Air Battery
Preparation and Study of Zinc-Air Batteries with Carbon-Supported Amorphous MnO2 Catalyst
The Study on Technology of Ocean Wave Energy Generation
Close-Packed Al2O3 Nanoparticles/Waterborne Polyurethane Layer-Coated Polyethylene Separators for Lithium-Ion Batteries
Dynamic Measurement and Estimation of Power Battery Residual Capacity
Hard Carbon Prepared from Willow Leaves Using as Anode Materials for Li-Ion Batteries
Preparation of Li2FeSiO4/C Composite Cathode Materials for Lithium Ion Batteries by Carbothermal Reduction Method
Dual Carbon Coating Used in the Preparation of LiFePO4/C Cathode Material
Renewable Generation and its Integration in the Power System of Green Island
VRB/EDLC Hybrid Storage System with PID Controller Based on BP Neural Network
Chapter 7: Energy-Saving Technology and Energy Conversation
A New Thought and Method to Estimate and Design Power Capacity from Terminal Electricity Consumption (Power Load) in the Civil Airport
A Research on Energy-Saving Technological Transformation of Cement Grinding System Based on FPP Grinding
An Analysis of the Seasonal Energy Consumption of Culture and Education Comprehensive Building
Analysis of Heat Distributing to Ensure Energy Saving
Analysis of Natural Lighting Stadium Negative Effect
Application of Heat Pump Energy-Saving Control Temperature Technology in Large Warehouse on Preservation Quality of Rice
Comprehensive Evaluation of Energy Conservation and Emissions Reduction for Green Power Grid
Energy-Saving Measures of a 1Mt/a Gasoline and Diesel Hydrofining Unit
New Energy-Saving Elevator Energy Consumption Analysis and Simulation Based on MATLAB
Chapter 7: Energy-Saving Technology and Energy Conversation
Performance Evaluation of a Vertical U-Tube Ground Heat Exchanger Using a Numerical Simulation Approach
Research on the Energy Consumption and Potential Emission Reduction of District Heating in the North of China
Research on the Energy Consumption Efficiency Based on Generalized DEA Method with Cluster Analysis
Study on Waste Heat Recovery of Soy Sauce Production Process in Jinshilongmen Brewery
A Novel Two-Stage Ethylene Rankine Power Cycle with Cold Energy Recovery of LNG
A Simple way to Estimate the Signal-To-Noise Ratio and to Save Energy
Analysis about Main Influence Factors of Vehicle's Fuel Consumption
Analysis on the Cycle Characteristics of Dual Swash Plate Stirling Engine
District Energy-Saving Measures and their Selection Method
Ground Source Heat Pump and Conventional Heat Sources to Match the Design and Operation Mode for Energy Saving
How to Implement the Method that can Annually Save more Energy than the Corresponding Energy of Large Oil Field Output
Hybrid of Daylight and LEDs in the Lighting Design of a Tunnel
Optimal Design for the Room Temperature Control and Household Heat Metering System
Problem and Solution of Frequency Conversion Transformation on Axial FGD Booster Fan in 600MW Unit
Research on Coordination and Optimization Model of User's Electricity Energy Efficiency with Load of Diversity
Study of Optimization Design and Energy Saving Effect Prediction of Rudder Bulb Based on CFD Technique
Synergetic Utilization of Coal and Industrial Waste Heat in Power Generation System
Water Supply Pumping Station Energy Consumption Analysis and Energy Saving Research Based on the Energy Consumption Coefficient
Thermodynamic Analysis of Ethanol Diesel-Oil Alternative Fuel
Chapter 8: Energy Materials and Technology
Abnormal Heat Triggered by Pressure Change in a D/Pd Gas-Loading System
Analysis of Chinese Natural Gas Interchangeability Predicted by Weaver Indices
Crystallitic Structure and Thermodynamics of Magnesium-Based Hydrogen Storage Materials from Reactive Milling under Hydrogen Atmosphere
Effects of FEC Additive on the Low Temperature Performance of LiODFB-Based Lithium-Ion Batteries
Influence of Eu Substitution for Y on the High Temperature Electric Transport Properties of YBaCo4O7+d
Magnesium Hydride of Orthorhombic Crystal from High-Energy Ball Milling under Hydrogen Atmosphere
One-Pot Synthesis of Carbon-Coated ZnFe2O4 with Excellent Electrochemical Performance as an Anode in Lithium Ion Battery
Pyrolysis Characteristics of Long Flame Coal
Structure Characteristics Analysis of Long Flame Coal
Study of Influence Factors on Wettability of Coal Dust
Study on Pre-Esterification of Trench Oil and Preparation of Bio-Diesel
Study on Consist Property of High Wax and Super-Viscous Crude Oil
Effects of Na and V Co-Doping on Electrochemical Performance of LiFePO4/C
Influences of Precursor’s Processing Method on the Electrochemical Properties of Synthesized Lithium Vanadium Phosphate
Sol-Gel Synthesis of LiFePO4/C Composite Cathode Material from FePO4/PANI
The Preparation of Primary Battery Separator Using Polyamide Nonwoven and Nanofiber
The Study of Theoretic Coated Carbon Amount and Excess Lithium in LiFePO4/C Synthesis by Means of Carbon Thermal Reduction Route
Chapter 9: Energy Chemical Engineering and Processes
Experimental Investigation of Emissions from Biodiesel
A Novel Active Ni-Ce-Al-Mixed Oxide Catalysts for Oxidative Dehydrogenation of Propane
Analysis of Extraction of Coal Oxidation Residue in NaOCl
Calculation of Enthalpy and Entropy of Oil Vapor in Condensation Process
Catalytic Cracking of Coker Gas Oil at High Reaction Temperature and Catalyst to Oil Ratio
Effect of by-Products from Wet-Oxidation Explosion on the Growth and Fermentation of Saccharomyces cerevisiae
Effects of Fuel Supply Advance Angle on Engine Thermal Efficiency and Emission Performance Fueled with Bio-Diesel
Experimental Studies on H2-Rich Gas Production by Co-Gasification of Coal and Biomass in an Intermittent Fluidized Bed Reactor
Process Improvement of a 1Mt/a Gasoline and Diesel Hydrofining Unit for Energy-Saving (II)
Simulation of a Novel Chemical Looping System for Recovering Elemental Sulfur from Acid Gases Using Ca-Based Oxygen Carriers
Study on the Kinetics of Chemical Looping Combustion of Copper-Based Oxygen Carrier
The Preparation Methods of Fe2O3/Al2O3 Oxygen Carriers and their Chemical Looping Combustion Performance
Effect of Oxygen Plasma Treatment on Bacterial Cellulose-Alginate Composite Sponge as a Yeast Cell Carrier for Ethanol Fermentation
Esterification of Oleic Acid and Bioalcohols Using Immobilized Lipase
Investigation into the Reactivity Behavior of CaSO4 with Coal Chars in the Chemical Looping Combustion System
Numerical Simulation and Optimization of Urea-SCR Catalyst for Diesel Engine
Research and Application of Floaters Produced from Water Treatment in Oilfield SZ36-1 as Profile Control Agent
Study on Measurement and Simplified Model of Burning Rate of AP/HTPB Base Bleed Propellant under High Pressure
Transesterifcation of Palm Olein Oil Using Na3PO4 as Heterogeneous Catalyst
Transformation of Methane into Synthesis Gas Using the Redox Property of Pr-Zr Mixed Oxides: Effect of Calcination Temperature
Experimental Study on Catalytic Combustion Parameters of Gasoline Vapor in Oxygen-Poor Condition
Chapter 10: Energy Security and Clean Use
A Performance Study of Coke Oven Gas Vehicle
Analysis of Chinese Energy Security Based on Quantitative Evaluation Method
Energy Security Assessment: A Review
Impact Analysis of Integration of Coal Resources on China's Energy Security
Index System Construction and Research of Inexact Influence Analysis Model of Energy Risk System
Investigations of Energy Separation Effect in Vortex Tube for Different Gases
Mapping the Energy Flows of Coal Utilization in China: The Methodology and Case Studies for the Year 2005 and 2010
Process Analysis of Ocean Thermal Energy Used for Desalination
Research on the Wear Characteristics of Injection Pump in Di-Engine Fueled with Dimethyl Ether
Simulation of Chemical Looping Hydrogen Production Using Solid Fuel
Study on Diesel Combustion Dust with ASE and HPLC
The Use of Tailored Micro-Hydro System in Micro-Urban Scale as a Partial Presumption for Creating the Autarchic Micro-Urban Structures
Development and Utilization of Green Energy in Hanjiang River Basin: Example from Xiangyang Section
Corrosion Mechanism of 316L Stainless Steel in a Expansion Joint of Blast Furnace Gas Pipeline in a Power Plant
Dynamic Simulation and Influencing Factors Analysis of Biofouling
Effect of Different Biofouling Characteristics on Heat Transfer of the Heat Exchanger
Hazard of Coal Mine Gas and its Preventive Measures
Investigations of Energy Separation Effect in Vortex Tube for Real Gases
The Effect of CO2 on Pyrite Transformation
Causes Analysis of Wet Flue Gas Desulphurization Stack Rainout for the Thermal Powerplant without GGH and its Countermeasures
Status Analysis of Energy Consumption, Supply and Conservation in Beijing
Chapter 11: New Energy Vehicles, Engine and Electric Vehicles
A Research on Compressed Natural Gas Engine Fuel Supply System for Rapid Prototyping Based on AMEsim
Analysis and Research on Fire Risk of Electric Vehicle Charging and Swapping Station
Analysis On-Board Charger to the Influence of Power Quality
Effect of Excess Air Ratio on Idle Performance of a HCNG (H2+CNG) Engine with Different Hydrogen Blend Ratios
Effect of Ignition Timing and Excess Air Ratio on Combustion Characteristic of Linear Engine
Impact of Peak and Valley Period Partition on Load Curve of Distribution System with EV
Influence of Piston Initial State on HCCI Combustion in Micro Free-Piston Engine Using Experiment Images and CFD Analysis
Optimal Planning of Electric Vehicle Charging Stations Location Based on Hybrid Particle Swarm Optimization
Power Generation System by Vehicle on the Downhill of Expressway
Safety Research and Lightweight Design of Electric Vehicle Battery Protection Device
Study on Zn-PANi Battery Characteristics Used for Electric Vehicles
The Economic Benefit of Electric Taxi Based on Total Ownership Cost Model
The Technical Modification and Performance Analysis of Diesel/LNG Dual Fuel Engines
A New Power Allocation Strategy of Supercapacitor/Battery Hybrid Energy Storage System for Electric Vehicles
Analysis on Harmonics Caused by Connecting Electric Vehicle Chargers with Power Network
Application and Control of Brushless DC Motor for Electric Vehicle
Bond Graph Modeling and Analysis of HEV System Based on Ravigneaux Planetary Mechanism
Control Strategies for AC Motor of Electric Vehicles
Effect of Ignition Timing on the Starting Characteristics for Linear Engine
Energy Efficiency Assessment Study of Electric Vehicle Charging Network
Experimental Research on the Effect of Excess Air Ratio on Turbocharged Lean-Burned CNG Engine
Piezoelectric Vibration Energy Harvester in Electric Vehicles
Remote Monitoring System Development for Electric Vehicles
Research of Electric Vehicle Regenerative Braking Control Strategy Based on EHB System
The Design of APU(Auxiliary Power Unit) Control Strategy
Thermal Analysis of the Battery Box in Electric Vehicles
Thinking and Suggestions to the Competitiveness of New Energy Vehicle in China
Analysis Research of Technology Schemes of Reduction NOx Emission in Lean Burn Gasoline Engine
Photovoltaic Electric Vehicle Charging System with the Function of Active Power Filter
Chapter 12: Building Materials and Technologies, Energy-Saving Buildings, Civil Engineering
Incorporate Design of SWH System with High-Rise Residential Building in Northern Guangxi Province - Principle of Design and Calculation
The Simulation Analysis of Tunnel Wind Cooling System in Shenyang Area
A Case Study of Retaining Wall Using Pre-Stressed High-Strength Concrete (PHC) Pile for Deep Excavation Work
Based on MIDAS/CIVIL the Anchorage of Mass Concrete Temperature Field and Stress Field Simulation Analysis
Coarse Aggregate Gradation Design Index and Method of Asphalt Mixture
Concrete Exterior Wall Insulation without Network System
Dynamic Responses of Red Sandstone with Fluid-Solid Coupling under Impact Loading
Energy Consumption Simulation of the Air Conditioning System in Large-Scale Buildings
Experimental Research of Arrangement Method of Prestressed Concrete Slab with Unbonded Reinforcement
Material Properties of Bridge Deck Dedicated Interface Agent and Key Construction Techniques
New Type of High-Strength Support in Deep Soft Rock Roadway
Numerical Analysis on Hollow EPSRC Block and its Thermal Insulation Wall
Performance of Hemp-Starch Concrete Composite
Rebounding Method Application of Structure Concrete Compression Strength Detecting in Datong Area
Reflection upon Energy Saving and Emission Reduction in Colleges in the Context of Low-Carbon City Construction
Simulation of the Indoor Thermal Environment of Sunspaces-Attaching Passive Solar House in Shihezi of Xinjiang
Study on the Green Earthen Buildings
Study on Water Stability of Granite Asphalt Mixture
Studying on Optimum Insulation Thickness of External Wall for Existing Residential Building Energy Saving Reform in Severe Cold Area
The Analyses of Daylighting in High-Rise Office Buildings and the Design Essentials
The Green Energy-Saving Design of Stadium
The Guiding System Design of Medical Architectural Interior Space Take the Third People's Hospital of Nantong for Instance
The Research of Mixture Ratio Factors on the Concrete Consumption Norm
Ultrasonic Non-Destruction Detecting Method for Concrete Compression Strength
Acid Attack on Cement Paste Containing Limestone Powder
A Brief Review of the Relationship between Energy-Saving Buildings and Total Cost Management
A Review of the Application of LCA for Sustainable Buildings in Asia
A Study on the Energy Conservation Policy of South Korean Universities
A Study on Building Energy Efficiency and Green Building
An Intelligent Controlled External Shutter for Building Shading
Analysis on Light Brick Research and the Application in China
Arrangement Method Research of Prestressed Concrete Slab with Unbonded Reinforcement
Comparison of Optical Smoke Density of Expanded Polystyrene without and with Cover Components Used in ETICS
Daylight Factor for Energy Saving in Retrofitting Institutional Building
Integrated Application of Marine Geophysical Technology in a Seawall Reinforcement Project
Life Cycle Assessment for Building Envelope
New Type Rural Residence Energy-Saving Effect Analysis in Northeast China
On the Preparation and Properties of Luminous Concrete
Practice of Government's Comprehensive and Whole Process Quality Supervision on Energy Efficiency Project in Civil Building
Primary Research about Energy Consumption Analysis and Optimization Strategy of Office Buildings
Research on Key Prestress Construction Techniques of Continuous Box Girder
Research on the Calculation Method for Diagonal Shear Capacity of Steel Reinforced Lightweight Concrete Beams
Rigid Polyurethane Foam Based on Modified Soybean Oil
Studies on Energy-saving Control of the Whole Process of Construction Project
Study on Structure Safety of the Tunnel Secondary Lining of Passenger Dedicated Line for High-Speed Railway during Service Period
Study on the Green Building Evaluation Standard
Study on the Performance of Cushion in the Rigid Pile Composite Foundation under Flexible Load
Study on the Seismic Performance of Cavity Walls Constraint Masonry Construction
The Analysis of Double-Nonlinearity Stability of Concrete Filled Steel-Tube Arch Bridge
The Architecture Research of the Building External Shading and Building Energy-Saving System Based on the Intelligent Control
The Influence of Fly Ash on the Crack Performance of Airport Pavement Concrete by Dumbbell Test Method
The Research on the DEM Simulation of the Railway Ballast Tamping Process
The Study on Design Method of the Sustainable Dwellings in Mountain Areas Based on BIM
Study on Temperature and Stress Development of Channel Lining Concrete in Construction
Study on the Cyclic Loading Effects to the Railway Ballast
Laboratory Studies of the Mechanical Properties of Bolt Thread Connection
Analysis of Influence of Slab’s Reinforcement on Seismic Bearing Capacity of Beam’s Cross-Section in Cast-In Situ Frame Structure
Experimental Study on Seismic Performance of CFRP Strengthened RC Frames Damaged by Earthquake
Study on the Effect of Grid Beam on Seismic Performance of Improved Multi-Ribbed Slab Structure
